OS 4.5 Documents to Go update to 1.0050 OTA fails

Yesterday, I upgraded to OS 4.5 and all seems well.  I am trying to obtain the update for Documents to Go to version 1.0050 which will allow the functionality for Excel spreadsheets.  I went to Data Viz and requested the update and a link was sent to my Curve 8830.  When I try to get the update via OTA it claims an incompatability issue and then after I confirm to continue the download fails.  I have not found a way to download a computer version of the update so that I can upgrade via the PC.  Has anyone successfully updated to Docs to Go version 1.0050 (with Excel)? 
thanks, todd.
Solved!
Go to Solution.

Finally got Docs to Go to upgrade properly and now I have Sheet to Go.  See link:
http://support.dataviz.com/support.srch?docid=14238&pid=186
I had to use the alternate install, but first deleting the original version of Docs to Go.  The first run through alternate install did not work.  After a delete and reboot it worked OK.  
I get a "907 Invalid COD" error when trying to download and install Documents To Go on my BlackBerry.
Document ID: 14238 << Back Last Reviewed: 11/25/2008      Printer FriendlyProblem:I get a "907 Invalid COD" error when trying to download and install Documents To Go on my BlackBerry.Solution:A "907 invalid COD" error happens when Documents To Go cannot find specific components needed during installation. This problem can occur if there is an interruption (such as a network failure) during the download & installation of Documents To Go on the phone, which can cause some of the application components to fail to download.
To resolve this problem, try these suggestions:
OTA Installation
First, try to redownload the application again by using the link sent to you from DataViz, or by visitingwww.dataviz.com on your BlackBerry web browser.
Alternative InstallationIf you are still having problems, there is another way to install Documents To Go. Click the following link and follow the steps for "Alternative installation":
Alternative Installation
Uninstall/Reboot/Reinstall
If you still receive the "907 Invalid COD" error when attempting the alternative installation, you will need to uninstall Documents To Go, reboot the phone, and then reinstall Documents To Go. To do so, please follow these steps:
Open the Options application on your BlackBerry, and go to Advanced Options > Applications.
Scroll down to highlight Documents To Go, then press the Menu button and select Delete.
When asked if you want to delete Documents To Go, select Delete.
While the BlackBerry is still powered on, remove the battery.
Reinsert the battery and turn the power back on.
Reinstall Documents To Go (you can try either the OTA installation or the Alternative installation). 

Similar Messages

  • Unable to proceed in change document are not updating in CDHD, CDPOS tables

    Hi all,
    This is a question related to Change document.
    I created one custom Change document object ‘ZBUDGETS’.
    As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ‘ZBUDGETS’.
    I included some of the authorized fields from FMIT table on which we placed the trigger.
    And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
    Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
    the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
    Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
    Prabhakar

    CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
    You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
    Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
    -Kiran
    *Please reward useful answers

  • How to make the document dirty after updating the links?

    Hi,
    I am using the below code to update the link resources by providing new URI. The link resources are getting updated, but the document is not becoming dirty.
                    InterfacePtr<ICommand> updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));
                    InterfacePtr<ILinkResourceStateUpdateCmdData> updateCmdData(updateCmd, UseDefaultIID());
                    updateCmdData->SetResource(ref.GetUID());
                    updateCmdData->SetDatabase(ref.GetDataBase());
                    updateCmdData->SetNotify(true);
                    updateCmdData->SetUpdateAction(ILinkResourceStateUpdateCmdData::kUpdateURI);
                    updateCmdData->SetURI(newURI);
                    updateCmd->SetUndoability(ICommand::kRegularUndo);
                    CmdUtils::ProcessCommand(updateCmd);
    How do I make the document dirty after updating the resources?
    Thanks,

    Thanks. It is working fine.
    I called PreDirty(docPtr), before updating the links.

  • Document flow not updated for Package Quote

    Hi
    I am creating a Packaged Quotation from Opportunity. After creation of document I see that document flow gets updated in Quotation but in an Opportunity it is not updated (in UI). Whereas in GUI it is being shown correctly. Please help me in resolving this.
    Thanks & Regards
    Hits

    not required

  • Measuring point/document is not updating

    Dear all,
    I am  new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
    1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
    2) Then i have assigned this equipment as a PRT in the routing of material .
    3) Production order confirmation via co11n  Each unit
    Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
    STILL not answered and no reply.
    I am waiting for reply.
    Thanks
    tarun
    Edited by: tarun on Oct 5, 2010 5:06 PM

    Hello,
    Have look this thread [Re: Auto Update of measuring point/document;
    Regards,
    Rakesh

  • SC Item in Transfer process active - follow on document status not updated

    Hi Gurus,
        Follow on document is not updated in SRM after PO creation. Ours is classic scenario (SRM 5.5, ECC6.0) and passed thru the following steps - SC (FFT) created, document approved, sent to SoCo, purchaser assigned vendor and created PO, PO created in ECC.
    In SRM SoCo screen displays message 'PO created 45xxxxxxxxxx'  successfully. Checked the BE PO 45xxxxxxx that was created successfully.
    Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP jobs. jobs finished successfully. But status is not updated in SRM. RZ20/SLG1 does not have any errors.
    BBP_PD shows following statuses:
         I105   Awaiting Approval         X
         I1021 Created
         I1038  Complete
         I1106  SC ordered
         I1129  Approved
         I1111 Item in Transfer process 
                        The last status I1111 is still active.
    Any advise are welcome. Not sure if I am missing any OSS Notes.
    Regards
    Viktor Paul

    Hi,
    1. Check in table BBP_DOCUMENT_TAB if the entry exists use CLEAN_REQREQ_UP program.
    2. If entry in the table not exists then check in transaction BBP_PD if the follow on document ( PO ) Number reserved for
    the SC .. then use FM  BBP_PD_SC_RESUBMIT.
    3. none of these use normal process  execute BBP_REQREQ_TRANSFER And then use CLEAN_REQREQ_UP
    Thanks,
    prasad.s

  • Revenue recongnized documents are not updated with trading partners

    Hi SAP  Gurus
    Revenue recongnized documents are not updated with trading partners
    Can any body help on this as it is priority issue
    Regards,
    suchithra

    You might try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • To Activate the Approval Process when document is in update mode

    Dear Expert,
                        I have applied the Approval Process for UDF using the query "Select Distinct 'True' From ORDR T0
    Where IsNull($[ORDR.U_Rebate.number],0)>0 and $[ORDR.DocType]='I' ".
    Now as the field is UDF user is able to modify even after approval procedure.
    Please help me to apply the above query for the  Approval process even when the document is in update mode.
    regards,
    PankajK

    Dear Pankaj,
    Current B1 design only support approval for adding document. Update will not trigger approval.
    You may use SP_TN instead to block user updating it. If you are not familiar with the SP, search the forum first.
    Thanks,
    Gordon

  • 'In Process/Cancelled/Reversed' document cannot be updated. Message no. 4F2

    Hello Experts,
    During Updating ARE1 document through J1IA101 t.code in the export under bond scenario I am getting the message 'In Process/Cancelled/Reversed' document cannot be updated. Message no. 4F2.
    Can any body help me in this case?
    Regards,
    Sandeep

    Hai Sandeep,
    Please check setting maintained as per details
    ARE1 Process
    Regards,
    Mani

  • Document year not updated at the time of part I Posting

    Dear Guys.,
                        At the time of part I posting  the document yaer not updated properly. this is not upodated in some times or some cases only . but it is updating correctly other times...
    but i dont know the reason why this document year was not updated.
    the field name and table tane is J_1iexchdr- DOCYR.
    Excise Transaction type is GRPO.
    because of this problem we can not able to do the invoice verification..
    REgards
    P.Anandhakumar.
    Edited by: Anandhakumar Palanisamy on Sep 3, 2009 8:47 AM

    Timing
    I am not sure what is going on behind the scenes with this web site in the past few days. One day I could not post in your thread at all. Another day
    I was receiving Inbox email notifications that were never posted in the Adobe Premiere Elements Forum or were posted several hours after I saw them
    in my Inbox email notifications. I was waiting for the problem to disappear on its own. If not, we can post in the Adobe Comments Forum to find out what
    might be going on.
    https://forums.adobe.com/community/general/forum_comments
    Yours has not been the only thread where I have had these problems.
    ATR

  • I can't open my documents with the update.

    I can't open my documents with the update. It says to update pages in the app store but I've already done that, that how I got in this stupid mess. How do I fix it? When I go on the app store it doesnt say update, it says installed, but I still cant open my documments. I'm freaking out.

    Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

  • Numbers for iOS - Documents frozen in update mode

    After restoring the contents of my iPad2 to my new iPad (4th Gen) two of the documents in Numbers are "frozen" in update mode. The same two documents are being updated according to the pad, but nothing happens. I have restarted the iPad several times which did not help. I can neither open nor delete the two documents in question. Can anyone help med by suggesting a possible fix?

    are all your documents saved on your desktop already, or icloud? If so you could delete the apps and reinstall. then download from icloud/desktop again.
    Jason

  • TS3991 I am working on an article of over 7000 words... suddenly, Page, says that document cannot be updated and opened... I lost valuable time and text in the process! What is going on here?

    I am working on an article of over 7000 words... suddenly, Page, says that document cannot be updated and opened... I lost valuable time and text in the process! What is going on here?

    Pages used to make backups... It does no longer... I cannot even revert to a previous version not being able to open the document that I was still working on half an hour ago. Thank heavens, I made a copy by selecting all text and copying it into an email when the problem first occurred yesterday evening. I am now working on it as an email. I can't risk loosing text this way anymore thru Pages. This is very bad. I am truly disappointed by this... particularly having moved from MS Office to iWorks!

  • Unable to verify update. iOs 8.0.1 failed verification because you are no longer connected to the internet.

    I have updated my iPad, my wife's iPad, but both our iPhones (5S) and (5C), give the following error every time we try.
    "Unable to verify update. iOs 8.0.1 failed verification because you are no longer connected to the internet."
    We are obviously connected to the internet because the updated downloaded on all 4 devices, but the iPhones will not go the next step.
    Wifi ok
    Connection ok
    Help ...
    Mark

    Apple has pulled the iOS 8.0.1 update due to problems.
    iOS 8.0.2 will be released in "the next few days".
    Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
    We have a workaround for you if you have an iPhone 6 or iPhone 6 Plus and you lost cellular service and Touch ID functionality today after updating to iOS 8.0.1. You can reinstall iOS 8 through iTunes by following the instructions below. We are also preparing iOS 8.0.2 with a fix for the issue, and will release it as soon as it's ready in the next few days.

  • Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera.  Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

    just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera.  Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

    The D610 didn't get out-of-the-box RAW support until Photoshop CC.
    You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

Maybe you are looking for