OS 4 for IPhone

what i would like to see in the final stages of OS 4 would be:
password protected Messages
and
Youtube app, add a new tab (recently added) etc...

You may supply feedback to Apple regarding any enhancements/features that you would like to see at this link. http://www.apple.com/feedback/iphone.html
We are all users here and Apple does not read and/or respond to these posts.

Similar Messages

Jabber for iPhone and iPad cannot receive calls

We currently have Call Manager 9.1.1 and Presence 9.1.1.
I am starting to use the Jabber Client for iPhone and iPad, but am having trouble receiving calls dialed to a particular extension.
If I can go settings for the iPhone Jabber client as an example, I am succesffuly connected to all accounts: IM, Phone Services, Voicemail, and WebEx.
When I go to the keypad, I can succesffuly dial internal extensions and make outbound calls to any numbers and they come accross as using my extension.
When calling the extension, my desk phone rings, but not the Jabber client.
Not sure what could be causing this issue to occur for Jabber not receiving the calls.
Thanks for any suggestions.
Paul Gaydos

Should still work. But would be good to check indial into jabber with the phone unplugged, just for testing purposes.
also, you have checked the partition and configuration on the TAB device is the same as on the deskphone?
Can you attach call manager traces when making a test call and attach to the case. Let us know the extension and device names you have used in the test, and a timestamp of the test.
thanks
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs.

anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs. Really frustrting as voice calls break and automaticcaly gets disconnected.

My current phone is not working. The iOS 8 update has made my phone go from a joy to have to something I want to throw away. I would like to uninstall my update and go back to loving my Iphone again. Can you please help? I've sent numerous messages with no response. I'm trying to stay loyal to Apple however if your only suggestion is to purchase another phone it might not be an Apple product anymore. I'm offering an opportunity to save a client who has multiple Apple products.

App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

disregard post.

Jabber voice for iPhone 9.1.7 crashes on iPhone 5S

Few users reported that Jabber voice for iPhone crashes on 5S after updating to latest 9.1.7 version. App loads, register to CUCM but crashes when using dial pad and application closes itself. App works on iPhone 4.
Does anyone else have the same issue?

The following error is reported via Console:
iPhone ReportCrash[4722] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/Jabber Voice_2014-05-19-083318_"removedname".plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
May 19 08:33:19 iPhone Jabber Voice[4724] <Warning>: Stderr redirected to: /var/mobile/Applications/0CDDD8A3-0BD0-40DA-AFCA-8B32C71B0187/Documents/Logs/Jabber Voice-2014-05-19-08331907-Console.log
May 19 08:33:19 iPhone Jabber Voice[4724] <Notice>: (Error) [ABLog]: ABPeoplePickerNavigationController does not support subclassing in iOS 7.0 and later. In the future, a nil instance will be returned.
Issue happens on iPhone 5S running 7.0.6 or 7.1.1 iOS.

Exchange iphone 4 for iphone 4S

can I return or exchange iphone 4 16 gb bought at at&t store online for iphone 4s 16 gb at the apple store. But i m still in the contract. I still have a year left of my contract.

With a year left in your contract, that would imply that your phone is already a year old. Within the first 30 days of purchase, you can reurn a phone under the "buyers remorse" clause, but after that, your best option is to try to sell your old phone to buy a new one.
With one year left on your contract, you would also not qualify for the "new discount" pricing, so you either pay the full price, or pay the "new discount" plus $250 and get a new 2 year contract. This would mean that the 16GB iPhone 4S wouldn't cost you $199, but in fact $449 and you would have a new 2 year contract starting the day of your new purchase.

IPhone 4 exchange /return for iphone 4s

can I return or exchange iphone 4 8 gb bought at verizon store for iphone 4s 16 gb at the apple store and pay the diference the phone is only 1 day old. verizon has a 35.00 restock fee does anyone know if this can be done?

Yes, within 14 days (or 30 in ca) any fee would be via Verizon.

Printer control app for iphone

is it possible to roll back to a previous version of the Printer Control app for iphone? I recently and stupidly updated the HP Printer Control app when offered through itunes on October 30 and have lost all the functionality I previously had to print directly from my iphone to my photosmart 7520. Previously I could print whatever pages I chose from Safari and could change the print settings for either draft or normal, colour / black & white before printing. Now when I try to print a page, you don't get the option to just print page 1 and it wastes ink. If I open a pdf (all I've tried so far) document within this new AiO Remote app - even though my printer is listed and supposedly set up - I can't print at all! I desperately want to ditch this abysmal update and go back to the version that worked perfectly. I have conctacted Apple and they were unable to help as it's a third party app and referred me back to HP. Does anyone know how to do this?

Hi brattynat. I have found a few older documents which might help you revert back.
Just to clarify, when you print from Safari, what are you clicking exactly to start your printing process?
How do I downgrade an iPhone app to a previous version?:
http://www.iphonefaq.org/archives/971543
Recover Older Versions of iPhone Apps After Updating:
http://gigaom.com/2010/08/25/recover-older-versions-of-iphone-apps-after-updating/
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Home sharing for iPhone 4; Remote App

Am using Windows XP desktop which is connected to router with Ethernet and my iPhone 4 uses the Wi-Fi.
Got latest version of iTunes.
Latest version of Remote.app
iPhone OS 4.3.3, not 4.3.5
I followed this guide to implement the inbound settings since it isn't available on Windows XP the way it is available on Windows 7:-
[CODE] no-ip . com/support/guides/routers/configuring_windows_xp_firewall.html[/CODE]
The port number i entered for TCP is 3689 and named it as bounjourport(the name shouldn't matter).
mDNSResponder.exe is also running.
And am still unable to locate my iPhone in iTunes for 'Remote App'. Actually there isn't any "Devices" list present on iTunes, though it appears when i connect the phone with USB. Also tried port forwarding on router, still no change.
Please help!!
**My previous phone was Sony Ericsson w995 which supported DLNA and i could access my phone files through the same PC with Ethernet connection to the router, so i guess this should be possible for iPhone too.
Thanks in advance.

Anyone help me please?

Jabber for iphone on CUCM 8.6.2

We have jabber for Iphone configured on CUCM 8.6.2, Everything is working fine except voicemail (CUC 9.1.2)
It shows status " Not signed", but when you try to enter credentials manually, it doesn't allow to enter Voicemail server. It is greyed out.
Searched community and couldn't find much info regarding this issue.
Any help is much appreciated.
Thanks!

Manish. Thanks a lot for your reply.
Yes, we have configured voicemail server settings
Voicemail Username
Voicemail Server
Voicemail Message Store Username
Voicemail Message Store 10.1.1.10

Jabber for iphone with CUCM 8.5

Hello,
I did the config on the CUCM for my iphone so now jabber on my iphone is connected succesfuly to the CUCM and everythings works well except desk phone intergration, I followed the process below descripted on the Cisco site but cannot understand the step below (underlined)
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#JABI_TK_E9D245B2_00
Step 1
Sign in to the Unified CM Administration portal.
Step 2
Navigate to the device page.
•a. In the Device Information section, click Device Association and search for the desk phone you want to associate with the mobile device.
(here my question is which device they are talking about? We have device profile for each user and we have mobility on our company and we can connect to any phone on our company with our profile, and in our CUCM I cannot find Device information or Device Association field??
•b. Select the device you want to associate with the mobile device, and click Save Selected/Changes.
•c. Navigate back to the End User page.
•d. Ensure that the Allow Control of Device from CTI check box is checked.
•e. Select the primary extension for the desk phone you want to associate with the mobile device.
•f. In the Permissions Information section, add Standard CTI Enabled to the User Groups list.
For 8900 and 9900 series phones, also add Standard CTI Allow Control of Phones supporting Connected Xfer and conf.
•g. Note the user ID of this user for use later in this procedure.
•h. Select Save.
Step 3
Navigate to the Device Information page for the desk phone you want to associate with the mobile device.
•i. Verify that the value for Owner User ID is the correct end user.
•j. Ensure that the Allow Control of Device from CTI check box is checked.
If this option does not appear in the Device Information section of the Phone Configuration window, the phone does not support this feature.
•k. Select Save.
Step 4
Navigate to the Cisco Dual Mode Device for iPhone page.
•l. Verify that the value for Owner User ID is the correct end user.
•m. In the Product Specific Layout Configuration section, for CTI Control Username, enter the user ID from the End User page.
•n. Select Save.
Step 5
Navigate to the Directory Number Information page and verify:
the Allow Control of Device from CTI check box is checked
the Associated Devices box displays the desk phone and the mobile device
Step 6
Restart the mobile device and the desk phone.
Thanks for your help
Bel

Hello,
By 'Use Mobile Network' I am assuming that you want to transfer the VoIP call to GSM using the Mobility Softkey on the iPhone. There are a couple of defects that you should be aware of when using this functionality:
1) CSCtu15500 - Call drop after user handoff VoIP call to mobile using Anyconnect (VPN)
2) CSCty91386 - Client can't handle send-to-mobile message
Workarounds: For the first defect, if you are using AnyConnect (VPN), please try transfer to mobile, with out using VPN. The the second defect, you must use the US English as the User Locale.
HTH,
--Vincent

Jabber for iphone. Unable to register

Hello,
   I am having problems to register my iphone client to CUCM.
   I am using CUCM 9.1.1 with last COP file installed and Jabber for iphone 9.1. I have followed all the steps according to the Admin guide
1.- Change Service Parameters > SIP Dual Mode Alert Timer to 3000
2.- Change SIP Profile and keepalive/register/subscribe timers
3.- Crate device Phone > Add New > Cisco Dual Mode for iphone
      Device Name is TCTJOSEHER
Assign a number and associate to end user JoseHer
4.- Associate device to user and associate CCM End user and CTI enabled permisions
Standard CCM End User
Standard CCM Gateway Administration
Standard CCM Phone Administrator
Starndard CTI xfer and conf
Standard CTI... rollover
Standard CTI Enabled
After multiple attempts, i cannot register the phone.
Looking to the logs it seems the phone try to register with no success
[TCTConnectionManager ssaCallbackWithStatus:] Starting VoIP account
-- 2013-06-20 12:25:41.055 DEBUG [3d73eb88] - [CSIPhoneManager switchToMode:] Already in mode CSIPhoneModeSoftphone
-- 2013-06-20 12:25:41.056 DEBUG [3d73eb88] - [CSIPhoneManager setStatus:] Setting status from CSIPhoneStatusDisconnected to CSIPhoneStatusRegistering
-- 2013-06-20 12:25:41.056 DEBUG [3d73eb88] - [CSIPhoneManager setSelectedDevice:] New selected device (null) using protocol --
-- 2013-06-20 12:25:41.056 INFO [3d73eb88] - [TCSessionViewManager softphoneStatusDidChange:] Softphone status changed to CSIPhoneStatusRegistering.
-- 2013-06-20 12:25:41.057 DEBUG [3d73eb88] - ##call count = 0
-- 2013-06-20 12:25:41.060 DEBUG [3d73eb88] - -[TCTConnectionManager softphoneStatusDidChange:]
-- 2013-06-20 12:25:41.061 DEBUG [3d73eb88] - [UMCVoipAccount setConnectionStatus]: Connecting
-- 2013-06-20 12:25:41.075 DEBUG [3d73eb88] - UCM connection attempted over cellular in foreground
-- 2013-06-20 12:25:41.078 DEBUG [3d73eb88] - [CSIPhoneManager registerClient:] tftpAddress: 10.200.1.167 mode: CSIPhoneModeSoftphone, devicename: TCTJOSEHER
-- 2013-06-20 12:25:41.079 DEBUG [3d73eb88] - CSIPhoneHelper::setLocalAddress - Setting client IP address to 192.168.208.201
-- 2013-06-20 12:25:41.087 DEBUG [3d73eb88] - CSIPhoneHelper::setCachePath - Setting phone cache path to /var/mobile/Applications/5ED6CCB8-FFB7-47A5-9D18-D78A5FB71A98/Documents/Caches/
-- 2013-06-20 12:25:41.089 DEBUG [3d73eb88] - CSIPhoneHelper::registerClientByDeviceID - Registering with tftpAddress: 10.200.1.167 deviceName: TCTJOSEHER
-- 2013-06-20 12:25:41.092 DEBUG [3d73eb88] - onNormalCapabilitiesUpdated
-- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - -[CSIPhoneManager normalCapabilitiesUpdated:type:]
-- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - [CSIPhoneManager normalCapabilitiesUpdated:type:] Received 0 for CAPA_CONV
-- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - [CSIPhoneManager normalCapabilitiesUpdated:] self.status 2
-- 2013-06-20 12:25:41.094 DEBUG [3d73eb88] - [CSIPhoneManager hangUpPendingCallForLostCapabilities:] ringingSessions count : 0
-- 2013-06-20 12:25:41.141 DEBUG [3d73eb88] - [EMAccount connectionStatusDidChange]: Active voip account is nil. Update isEMServiceAvailable and isSignedIn.
-- 2013-06-20 12:25:41.142 DEBUG [3d73eb88] - [UMCAccountManager connectionStatusDidChange]: post AccountManagerDidChangeConnectionStatusNotification for voip or otherServices change 0
-- 2013-06-20 12:25:41.142 DEBUG [3d73eb88] - [UMCVoipAccountViewController updateCtiStatusOnConnectionChange] - #ctiEnabled deskphone: (null), ctiStatusString:Not Configured
-- 2013-06-20 12:25:42.976 DEBUG [3d73eb88] - Analytics connection failed! Error - The request timed out.
-- 2013-06-20 12:26:11.079 INFO [3d73eb88] - ...previous log message repeated 10 times...
-- 2013-06-20 12:26:11.079 INFO [3d73eb88] - [CSIPhoneManager registrationDidTimeout:] An attempt to register timed out. Unregistering client.
-- 2013-06-20 12:26:11.084 DEBUG [3d73eb88] - [CSIPhoneManager unregisterClientWithError:] Unregistering client.
-- 2013-06-20 12:26:11.085 DEBUG [3d73eb88] - [CSIPhoneManager setStatus:] Setting status from CSIPhoneStatusRegistering to CSIPhoneStatusDisconnecting
-- 2013-06-20 12:26:11.085 DEBUG [3d73eb88] - [CSIPhoneManager setSelectedDevice:] New selected device (null) using protocol --
-- 2013-06-20 12:26:11.085 INFO [3d73eb88] - [TCSessionViewManager softphoneStatusDidChange:] Softphone status changed to CSIPhoneStatusDisconnecting.
-- 2013-06-20 12:26:11.086 DEBUG [3d73eb88] - ##call count = 0
-- 2013-06-20 12:26:11.086 DEBUG [3d73eb88] - -[TCTConnectionManager softphoneStatusDidChange:]
-- 2013-06-20 12:26:11.086 INFO [3d73eb88] - [TCTConnectionManager softphoneStatusDidChange:] CSIPhoneStatusDisconnecting, Softphone status set to DISCONNECTED.
Also in the CUCM you can see the attempts to register (so discard connectivity issues) that are seen from the CUCM
The error received is UNABLE TO CONNECT
any help would be appreciated.
thanks in advance.

Hello
I have same your problem but I didnt change or add anything from CUCM 9 all configuration as default.
thanks

Jabber for iPhone force auto-connect

Hello,
Does anybody know if it is possible to force Jabber for iPhone/iPad to connect to a wireless SSID network as soon as it is available?
We recently implemented Jabber and we are noticing that some times, users arrive to the office, where corporate SSID is available, but even if jabber is running on the background, it won't automatically reconnect to the network.
User will have to manually open the application and wait for Jabber to reconnect.
Is it possible to make this process automatic for the user?
Regards,

CUCM version is 8.6.2.
Presence version is 8.6.4
Jabber for iPhone & iPad is 9.6.2
The issue is that if Jabber is running on iPhone's background, even if wireless connection is activated, it seems to disconnect. In order to reconnect, user has to manually open Jabber and wait for the connection to establish, especially to make calls.
The same applies when a user is running Jabber, he arrives from outside to the company and wireless reconnects to corporate SSID. Jabber won't automatically reconnect until user opens the app.
Regards,

Jabber for iphone with cucm 10.5

Hi
i would like to configure cisco jabber for iphone for the purpose of using my smartphone for calls and instant Messaging
my question is : i will need COP file uploaded into CUCM 10.5 or already integrated and also the configuration required
regards

These guides will give you additional info on config part:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0110.html#JABI_TK_C15AA350_00
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0101.html

Jabber for iPhone 9.6 Integration with OpenLDAP

     Hi everyone! i just found an issue when try to integrated jabber for iphone version 9.6 with OpenLDAP that seem like not working and want to describe my environment as below.
Using BE6K 9.1 includes,
     - CUCM 9.1.2
     - IM&Presense 9.1
     - Jabber for Window 9.6 integrate with OpenLDAP using EDI on jabber-config.xml is working properly.
     - Jabber for iPhone 9.6 integrate with OpenLDAP using BDI on jabber-config.xml not working(cannot lookup)
     - Jabber Voice for iPhone and Android can integrate with OpenLDAP which configure in phone configuration
     - Both of Jabber can't access the photo in OpenLDAP with "jpegPhoto" attribute.
By the way im also included jabber-config.xml files for further troubleshooting. Another question, is it possible to include EDI and BDI for working together in one jabber-config.xml file
One another file is jabber for iphone log when im trying to search "anu" word in searching box
-- 2557-02-02 20:48:06.045 DEBUG [3d8d018c] - sidebar search, string is : a   <------ started from this line in my log file for easier troubleshooting.
If you need more log or any files for troubleshoot just tell me. Thanks for reading!.
<Jabber-config.xml>
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>OpenLDAP</BDILDAPServerType>
<BDIPrimaryServerName>10.0.1.11</BDIPrimaryServerName>
<BDIServerPort1>389</BDIServerPort1>
<BDIConnectionUsername>cn=xxx,dc=xxxx,dc=xx,dc=xx</BDIConnectionUsername>
<BDIConnectionPassword>xxxxxxxBDIConnectionPassword>
<BDIUseJabberCredentials>false</BDIUseJabberCredentials>
<BDIEnableTLS>false</BDIEnableTLS>
<BDIPredictiveSearchFilter>uid</BDIPredictiveSearchFilter>
<BDIUserAccountName>uid</BDIUserAccountName>
<BDIBaseFilter>(&(objectClass=inetOrgPerson)</BDIBaseFilter>
<BDISearchBase1>ou=users, dc=xxxx,dc=xx,dc=xx</BDISearchBase1>
<BDIUseANR>false</BDIUseANR>
<ConnectionType>1</ConnectionType>
<PrimaryServerName>10.0.1.11</PrimaryServerName>
<UseWindowsCredentials>0</UseWindowsCredentials>
<UseSecureConnection>0</UseSecureConnection>
<SearchBase1>ou=users, dc=xxx,dc=xx,dc=xx</SearchBase1>
<UserAccountName>uid</UserAccountName>
<BaseFilter>(&(objectClass=inetOrgPerson)</BaseFilter>
<PredictiveSearchFilter>uid</PredictiveSearchFilter>
<ConnectionUsername>cn=xxxx,dc=xxx,dc=xx,dc=xx</ConnectionUsername>
<ConnectionPassword>xxxxxx</ConnectionPassword>
<PhotoSource>jpegPhoto</PhotoSource>
</Directory>
</config>

Hi noom_ekkalak ,
Thanks for your answer!
I have specific LDAP parameter in TCT phone configuration as you say, then try to connect the "Directory" setting in Jabber Voice, but it didn't work . i just get the error “Unable to verify account” all the time. :(
Besides this ,is there anything i need to specific? How did you specific Jabber Voice "Directory" parameter?
Thank you!

OS 4 for IPhone

Similar Messages

Maybe you are looking for