OS 9 Required for iMac?

I am giving my iMac to Grandkids and have set it up for their use. However, their household is a PC dominant and they would only use OS X Applications, etc. Is it possible to delete the OS 9 System and Application folders without affecting the OS X functionality (OS 10.4.10)?
Royal

Duane
Thank you. Your answer validated my opinion.
Royal

Similar Messages

  • What are the system requirements for iMac for Photoshop CS6?

    What are the system requirements for iMac for Photoshop CS6?
    Just installed it and get a message saying it doesn't work on "this type of Mac".
    I have an iMac a few years old.....and Dual Core.

    System requirements | Photoshop

  • Is Partitioning absolutely required for imac 333

    I have an Imac 333 tray with a 6gb drive. Is partitioning required to run OSX and OS9?
    Thanks

    Partitioning is only required for that model if you install a hard drive larger than 8GB. Then you have to make an first partition for OSX that's just slightly under 8GB in size. OS9 and OSX can coexist in the same partition.
    With a small boot partition, you will need to be very aware of space as you install software. In such cases, i have the installer apply the bare minimum of files. If you install all the printer drivers in 10.3, for example, you will have used up one gig of your drive space for printers you don't own. Avoid the foreign language support unless you need it.

  • Requirements for iMac G4

    i found an iMac G4 for sale on craigslist and was thinking about buying it. these are the specs:
    Apple iMac G4 17"
    Model M6498
    G4/1.25GHz, 256MB, 80GB
    Super Drive, 10/100, 56K
    GeForceFX5200Ultra 64MB
    -1.25GHz PowerPC G4 processor
    -256K on-chip level 2 cache running at 1.25GHz
    -256MB of DDR SDRAM; supports up to 1GB
    -80GB Ultra ATA hard drive
    -SuperDrive (DVD-R/CD-RW)
    -17-inch (viewable) widescreen active-matrix LCD display with easy height, tilt, and swivel adjustment
    -NVIDIA GeForce FX 5200 graphics processor with 64MB of DDR video memory
    -Built-in 56K V.92 modem and telephone cable
    -Built-in 10/100BASE-T Ethernet (external DSL and cable modem ready)
    -Two FireWire 400 ports; three high-speed USB 2.0 ports; two USB 1.1 ports on keyboard
    -Ready for AirPort Extreme wireless networking
    -Audio: integrated microphone; Apple speaker minijack; headphone jack; audio line in minijack
    -Apple Pro Speakers
    -VGA video output; S-video and composite video output
    -Apple Keyboard and Apple Mouse
    -Easy Internet access
    -Included software: Mac OS, Mac OS X Mail, iChat, Safari, Sherlock, Address Book, QuickTime, iLife (includes iTunes, iPhoto, iMovie, iDVD), iSync, iCal, DVD Player, AppleWorks, AOL, Quicken 2003 Deluxe, World Book 2003 Edition, Mac OS X Chess, Sound Studio, Acrobat Reader
    -Meets ENERGY STAR and TCO 95 requirements
    i wanted to know if these specs were enough for a simple computer user to download and listen to music, store photos, and basic word processing. the ram looks a little low, but it has DDR ram, so i figured that wouldn't be too hard to upgrade. any suggestions on whether or not to buy it? thanks.

    Sadf,
    i noticed it has SODIMM as the "user" ram, and DIMM as the "factory" ram...
    The factory RAM is on the logic board and accessing this RAM requires that the bottom of the lower housing has to come off. Not a trivial procedure.
    This is from the service manual regarding the factory RAM:
    "Make sure that the memory installed on the logic board is compatible with the system. The computer accepts double-data rate (DDR) SDRAM DIMMs. DIMMs used in this slot must fit the following specification: PC2700 SDRAM DDR333 DIMMs for 167 MHz systems."
    and for the user installed RAM:
    "Note:
    DIMMs used in this slot should be a low-profile PC2700 (DDR333) SO-DIMM. Only
    the SO-DIMM slot is accessible by the user."
    Low End Mac:
    http://www.lowendmac.com/imacs/17in-imac-g4-1.25-ghz.html
    Notes that:
    "RAM: 256 MB, expandable to 2 GB using PC2700 (333 MHz) DDR SDRAM (officially supported to 1 GB by Apple)"
    OWC shows 1 GB modules for the user installed RAM:
    http://tinyurl.com/ahal5p
    Richard

  • IWork  help required for iMac OSXv10.7.5

    I have a 2 year old iMac pc on which I downloaded Pages/Keynote/Numbers almost 2 years ago. I tried yesterday to send a WORD friendly document and it came up that iWork was discontinued and it is iWork that you can change the format I believe.  Do I need to upgrade iWork? What do I need to download and is it free? I need pointing in the right direction to enable me to again have iWork as many of my friends cannot open Pages docs as they have Microsoft Windows OS.  As I am elderly I need good outline instructions please
    Many thanks x

    The latest version of iWorks is for Mavericks.

  • Power (amp/watt) requirements for iMac G5...

    Hi,
    I like to use my iMac G5 1.8 g 17" for onsite photo printing this spring (drag racing) along with a Canon ip6000 ink jet printer...
    My question is in order to determine best power inverter to purchase (will be working out of a car) I need to know the amps/watts these 2 devices need - so far unable to locate this info anybody here can help?
    Lastly my initial research of power inverters is the (much more) expensive 'true sine wave' models are needed for laser printers (but no mention of ink jet) should the 'modified sine wave' be PK?Thanks,
    rich56k

    Well I went to an electronics shop that sells power inverters...and with their help located the specs needed...turns out they're on the bottom (underside) of the printer 0.62 AMPS and on the bottom of the base on the iMac 2.5 AMPS total power needed 375 watts (use 20% additional for good measure they say) so an inverter rated 450-500 watts should be sufficent....
    Regarding the true sine wave vs. modified the shop recommends true sine to be sure (but more expensive) however I've found modified models online that specify being capable of powering home office equip. re: printers and desktop computers worse case is some interference on monitor...
    Anyhow - hope this helps someone else down the road!!
    As I've gotten plenty of good info here in the past...
    chow
    rich56k

  • Minimum voltage requirement for iMac?

    I recently installed a solar panel system on my house and when it first comes online or goes off (i.e. sunrise/sunset) My battery backups start beeping and going on and off. I assume this has to do with some change in the voltage coming into the house. The solar panel company, along with the battery backup company suggested I adjust the threshold on the battery backup to not be so sensitive. They suggested I set the minimum to 90 volts. My question is, is 90 volts too low? I noticed the tech specs for the computer list the minimum at 100v.

    I am assuming that in addition to your solar system, your home is also connected to the regular electrical grid. If this is the case I suspect that you have a faulty inverter (the gadget that converts the DC from your solar panels to AC and syncs it with the incoming power). The solar PVC system should NEVER INTERACT IN ANY WAY THAT AFFECTS THE GRID POWER. If you are off-grid this of course does not apply. In any event, the problem appears to be in your inverter(s) and the company that installed the system should correct the problem. I have a 10,000 watt PVC system installed on my barn roof with two SMA "Sunny Boy" inverters. They turn off and on seamlessly with the sun and NEVER interfere with my grid power (just run the meter backward at times). Your power company will also be unhappy, since if your voltage drops, It is probably also drooping any other house on your transformer,

  • IMac requirements for Pro Tools 10

    Hi guys,
    I'm currently working in a music studio as a producer. I've always been a Windows guy but as Pro Tools on the Mac is an industry standard, I need to migrate. I've never owned a mac before. I'm strongly swaying towards the iMac 27" with the 2.7ghz CPU and 4gb of ram. My question, does this system have enough punch for Pro Tools 10? I will often be using 10-15 tracks each with varying VSTs. Would this system struggle?
    Many thanks guys :)

    Hello Joel, & a wam welcome!
    27" should do it, but I'd go for the 3.4 GHz i7, add the 2 GB Graphics option, extended AppleCare, & add More RAM yourself, as much as you can afford, up to 32 GB...
    http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
    http://store.apple.com/us/configure/MC814LL/A?
    http://avid.force.com/pkb/articles/en_US/compatibility/en419171
    If you’re using Pro Tools HD 10, you’ll need a minimum 4 GB of RAM, but 8 GB is recommended (even more will be helpful if you want to use the new Extended Disk Cache functionality in Pro Tools HD 10).
    http://www.sweetwater.com/sweetcare/articles/what-system-requirements-for-pro-to ols-10/

  • HT6030 I can't install the update for Mail for Mavricks because it says "This volume does not meet the requirements for this update"? It's my iMac hardrive with 791GB available.

    I've recently installed Mavricks on my iMac and Mail went completely rouge on me. Tried switching to using Gmail directly but it's a terrbile user experience so I decided to install the new Mail update for Mavricks but have been geting this message. "This volume does not meet the requirements for this update"? My hardrive has 791GB available.

    Hi Allan,
    I thought I did explain it, but sorry if that wasn't clear.
    I get the little pop-up alert that tells me I have a new messages (Shows the sender and an abreviated version of the message) but those actual messages sometimes don't appear in my inbox until up to an hour later.
    Jason

  • Minimum Requirements For FC 5.1 - Laptop iMac

    Hi Gang
    My friends have an older iMac; Processor 1.9 Ghz Power PC G5 with 1 GB Ram. I'm pretty sure we can replace the two 512's with #2 Sticks of 1GB = 2GB.
    They've got about 140 GB's of free space on their system drive and are using Tiger 10.4 - They can upgrade to 10.4.11, that's not the issue. Was wondering if the current video card and remaining HD space would be adequate?
    *They will no doubt be using an external drive for scratch.
    Thanx for your input
    Mike

    Before You Install Final Cut Studio
    This document contains system requirements and things to do before you install the Final Cut Studio applications and content.
    WARNING: The Final Cut Studio installer performs a system requirements check before installing. If your system does not meet the minimum requirements listed below, the Final Cut Studio applications are not installed.
    Minimum Hardware Requirements to Install All Final Cut Studio Applications
    • A Macintosh computer with an 867 megahertz (MHz) or faster PowerPC G4, PowerPC G5, or Intel Core Duo processor
    • HD features require a 1 gigahertz (GHz) or faster single processor or dual processors; authoring or playing back HD DVDs requires a PowerPC G5 or Intel Core Duo processor
    • 512 megabytes (MB) of random-access memory (RAM)
    • HD features require 1 gigabyte (GB) of RAM or more (2 GB recommended)
    • Accelerated Graphics Port (AGP) or PCI Express Quartz Extreme graphics card
    • Motion requires the standard graphics card found in any MacBook Pro, iMac Intel Core Duo, Power Mac G5, or iMac G5; a 1.25 GHz or faster PowerBook G4; or a 1.25 GHz or faster flat-panel iMac. One of the following graphics cards is highly recommended: 
    • NVIDIA GeForce Quadro FX 4500, 7800 GT, 6800 Ultra DDL, or 6800 GT DDL
    • ATI Radeon X850 XT, X800 XT, 9800 XT, or 9800 Pro
    • ATI Mobility Radeon X1600 or 9700
    Note: Go to http://www.apple.com/finalcutstudio/motion/specs.html to find the latest list of supported graphics cards or to download the Motion Compatibility Checker.
    • A display with 1024 x 768 resolution or higher (1280 x 1024 resolution recommended)
    • A DVD drive for installation
    Minimum Software Requirements
    • Mac OS X v10.4.4 (or later)
    • QuickTime 7.0.4 (or later)
    Minimum Hardware Requirements to Install Individual Final Cut Studio Applications
    • Final Cut Pro 5
    • A Macintosh computer with a single 500 MHz or faster PowerPC G4 or G5 processor (550 MHz for PowerBook G4), any Macintosh computer with dual PowerPC G4 or G5 processors, or any Macintosh computer with an Intel Core Duo processor; 1 GHz or faster single processor or dual processors required to use HD
    • 512 MB of RAM (1 GB recommended); 1 GB required to use HD
    • AGP or PCI Express Quartz Extreme graphics card
    • DVD Studio Pro 4
    • A Macintosh computer with a 733 MHz or faster PowerPC G4, PowerPC G5, or Intel Core Duo processor; PowerPC G5 or Intel Core Duo processor required for HD
    • 512 MB of RAM (1 GB recommended); authoring HD DVDs requires 1 GB of RAM (2 GB recommended)
    • AGP or PCI Express Quartz Extreme graphics card
    • 8 MB of video memory (32 MB recommended)
    • Playback of DVD Studio Pro 4-authored HD DVDs requires a PowerPC G5 or Intel Core Duo processor
    • For writing finished projects to disc: Apple SuperDrive or other DVD recorder
    • For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    • For transporting projects on tape to a replicator (suggested for DVD-9 projects): DLT drive
    • For transporting projects on disc that contain copy-protection or dual-layer features to a replicator: authoring DVD drive
    • Source material requirements:
    • Edited video files in MPEG-1, MPEG-2, HDV, HD DVD-compliant H.264, or QuickTime format
    • Edited audio files in PCM, AIFF, MPEG-1 Layer 2, AC-3, DTS, or QuickTime format
    • Motion 2
    • A Macintosh computer with an 867 MHz or faster PowerPC G4, PowerPC G5, or Intel Core Duo processor (dual 2 GHz or faster processors recommended)
    • 512 MB of RAM (2 GB of RAM or more recommended for real-time interactivity)
    • Motion requires the standard graphics card found in any MacBook Pro, iMac Intel Core Duo, Power Mac G5, or iMac G5; a 1.25 GHz or faster PowerBook G4; or a 1.25 GHz or faster flat-panel iMac. One of the following graphics cards is highly recommended: 
    • NVIDIA GeForce Quadro FX 4500, 7800 GT, 6800 Ultra DDL, or 6800 GT DDL
    • ATI Radeon X850 XT, X800 XT, 9800 XT, or 9800 Pro
    • ATI Mobility Radeon X1600 or 9700
    Note: Go to http://www.apple.com/finalcutstudio/motion/specs.html to find the latest list of supported graphics cards or to download the Motion Compatibility Checker.
    • A display with 1024 x 768 resolution or higher (1280 x 1024 resolution recommended)
    • Soundtrack Pro
    • A Macintosh computer with a single 500 MHz or faster PowerPC G4 processor, dual 450 MHz or faster PowerPC G4 processors, or any PowerPC G5 or Intel Core Duo processor (867 MHz or faster processor recommended)
    • 512 MB of RAM (1 GB recommended)
    • AGP or PCI Express graphics card
    • A display with 1024 x 768 resolution or higher (1280 x 854 resolution recommended)
    Available Disk Space
    • 4 GB of disk space required to install all applications (Final Cut Pro, DVD Studio Pro, Soundtrack Pro, Motion, Cinema Tools, LiveType, Compressor, and Apple Qmaster)
    • Additional 42 GB required to install all optional templates, loops, content, and tutorials (may be installed on separate disks):
    • 9 GB for DVD Studio Pro content
    • 8 GB for Motion templates, Motion Series LiveFonts, and tutorial media
    • 8 GB for Soundtrack Pro content
    • 12 GB for LiveType content
    • 5 GB for Apple Pro Training Final Cut Studio Tutorials media
    Before You Install
    Make sure you do the following before you install the software:
    • Turn off any virus-protection and security software that you may have installed on your computer.
    • Upgrade to Mac OS X v10.4.4 (or later) and QuickTime 7.0.4 (or later).
    For installation instructions, see the Installing Your Software booklet.
    Copyright 2006 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, DVD Studio Pro, Final Cut, Final Cut Pro, iMac, Mac, Macintosh, Mac OS, PowerBook, Power Mac, Quartz, QuickTime, and Soundtrack are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Cinema Tools, LiveType, MacBook, and SuperDrive are trademarks of Apple Computer, Inc. PowerPC is a trademark of International Business Machines Corporation, used under license therefrom. Intel and Intel Core are trademarks of Intel Corp. in the U.S. and other countries. Other company and product names mentioned herein are trademarks of their respective companies. UP01180
    February 7, 2006

  • Require all in one kodak ESP7250 printer software for iMac

    require all in one kodak ESP7250 printer software for iMac

    The software for that printer is available from this Kodal web page:
    http://support.en.kodak.com/app/home/src/gosupport/selected/true
    You do not say which of the four families of iMacs you own nor the Mac OS version, so that about as far as I can point you.
    This forum is for iMacs made before 2006

  • I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine

    I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine than using Snow Leopard?

    Which iMac?  Which Macbook?   Both have had several model
    itertations, even within the framework of a Core2Duo processor.
    With that said, I have an early 2009 iMac 24", with 2.66 GHz
    Core2Duo with 8 gig of RAM, and in my opinion, seems to be running
    smoother and faster with Lion.

  • What are the "EXACT" requirements for Yosemite install on iMac 5.1 (fails on wk 27 2007 build with OS X.6.8)??

    My iMac seems to meet all of the stated requirements
    Ie: Mid 2007 or newer, 2GB RAM, 50+GB HD space, OS X.6.8. Yet it gives an error of "Cannot install Yosemite on this computer" after attempting an update/install. No other useful information is given and just re-presents the same system requirements over and over with no help.

    Yosemite requires an iMac 7,1 or higher, while yours is:
    Introduced
    September 2006
    Discontinued
    August 2007
    Model Identifier
    iMac5,1

  • Is there a separate download for iMac.  I bought and downloaded what I thought was the right download but it is not working and feel it might be a windows version.  How doe I get it right

    s there a separate download for iMac.  I bought and downloaded what I thought was the right download but not working and feel it might be a windows version.  How doe I get it right

    Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • What are the real minimum requirements for Mountain Lion?

    What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

    From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

Maybe you are looking for