OS is asking to install already existing printer driver over and over again

OS is asking to install already existing printer driver of a printer that already exists and works. If I say yes, he searches and finds nothing. What can I do to end this?

What kind of printer is it? Try deleting that folder from /Library/Printers/ and reinstalling the update.

Similar Messages

Portal Drive Error--re-install SAP NW Portal Drive software and try again

Dear Experts,
Could you please let me know if there is any permanent fix for
Portal Drive inconsistence behaviour.
1.We use NW2004s SPS 13.
2.After the installation of Portal Drive (version 4.5.6796 ) on an
desktop, windows is not stable and must be restart (cold start).
3. After the restart the problems still exists and only a
deinstallation resolves the problem.
4. Sometimes the problem occurs on connecting to a service,
sometimes on disconnecting.
Sometimes on starting windows, but before the load of Protal
Drive.
5."Presently we are getting error SAP NetWeaver Portal Drive is not installed or configured correctly.Please re-install SAP
NetWeaver Portal Drive software and try again"
6. If we uninstall it and reinstall, it is working fine.
I wanted to know if there is any permanent fix for this inconsistance in Portal drive.
Because i have received complaints from more than 9 users in this week.
Really thanks for helping me
Vishali.B

Hey just a update, so even though apple said the HDD was fine because of the S.M.A.R.T status and it was been picked it would be fine I did not agree, took my iMac apart went out to the local computer shop picked up a cheap 1tb WD HDD and now the iMac is worked fine and smooth :-)
So now I know that was the issue I can order a nice new SSD for the iMac and use the new HDD I got in an external case :-) just incase anyone had the same issue that's the fix. Buy a new HDD or SSD

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

I downloaded the Acrobat 11 trial and I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

How do I install a pdf printer driver on my window computer using create pdf

How do I install a pdf printer driver on my window computer using create pdf

http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_adobePDF_desktop_printer

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

DNS server refurse to start after installing MFC-7820N printer driver

Last night I installed a new printer driver brxubprt11c.dmg for Mac OSX 10.4 V.1.1.0
This morning I could not get the DNS to run, which had been running for months. I would start but immediately stop again. I try to save the setting again with a small change but alas. The apple tech support had me check my hard drive and repair permission, but alas. They recommended that i read "getting started supplemental manual" and did a new DNS setup.
This night I decided to copy all the setting (I took screen captures and dragged the DNS Config.plist to my desktop. Just in case, I changed the log setting to "debug"... Maybe it would tell me something... I started it up...but it kept running...
Does this make any sense to anyone? Does anyone has a guess how saving the log setting might have got the thing back to work? Does it save only the change in the log file or the whole DNS Config.plist?

This was due to a bad hard drive

HT1560 If diagnostics says appletv is working properly, why does the install keep getting stuck on pairing with the computer then back to select resolution over and over.

First gen Appletv suddenly stopped working from one night to the next. This has happened in the past once and the usual restore, reboot, etc, tinkering finally snapped it back into working quite unexpectadly. The symptom is, after restore when it gets to the screen to pair with itunes by entering the numbers in itunes, the number is briefly up on the tv screen and then quickly is gone returning to the select resolution page. This happens over and over with each try while the Appletv never shows up in itunes and the number box never appears either to pair the computer with the Appletv. It does the same thing with my intel macbook so I don't think it's the Imac. I have dumped itunes 10 and reloaded itunes 9 with no change in the problem. My IP scanner picks up that the Appletv is on our network as soon as it turns on. I have used wireless, which it finds and logs into, and ethernet which also has it finding my network. I can't test whether it is actually on the network by trying to play a trailer or something because it will not go past that pairing screen in the initial setup. Are the built in diagnostics reliable when they say your appletv is working correctly. The hard drive isn't making any exceptionally loud noise as it spins up. I am stuck with this unit because I use it with a G4 Imac running Tiger 10.4 for a video/audio jukebox at the bar. New ATV won't work with the Imac unless it's running leopard I believe. The thing runs like molasses already so attempting leopard which I don't have anyway would really make it crawl. I love a good mystery/problem but this thing is driving me crazy. If I just could know for sure what component inside was shot I would replace it. Could a hard drive boot up to a degree and then get stuck at one part of the install, or would it have to be the logic board, or something else. Bad juju in the house or something

Had same problem this finally stopped it for me.
FINDER
APPLICATIONS
UTILITIES
DISK UTILITY.app
select your main hardrive
REPAIR DISK PERMISSIONS
Message said repairing estimated time 1minute, yeah okay we all know how accurate those are process took about 5 minutes with nothing showing then all of a sudden printer permission repaired notations were flying onto screen in actions box. Do restart for heck of it sign on and so far no message has apeared where it did regularly. I hope this is indeed the fix. In meantime it never hurts to fix permissions so give it a try.
George in NY

How to uninstall and reinstall itunes...it has gone crackers... sometimes opens, other times asks for agreement, then when it is open, asks over and over for charge card verification... this is one horrid product but we are stuck with this crap... how

How to uninstall and install itunes... has gone crazy... opens up sometimes, other times ask me to sign agreement over and over, takes me to tutorial, wants me to download what I have already downloaded...this is post last upgrade... How to fix this garbage and get back to the normal I have been used to... this is infuriating

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

Aperture forgets it license and asks me for the serial number over and over again

Hi,
This is getting ridiculous to the point where I'm thinking of just ditching Aperture. It's continually forgetting is license and asking me for the serial number over and over again. I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not accepting either of them. What's going on and how do I fix it permanently?
Thanks,
Rob

Rob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
http://support.apple.com/kb/DL1610
About Aperture 3.4.3
Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie

Itunes v 11.1.5 keeps installing over and over

When I install itunes v 11.1.5 it goes through ok, the program works but I keep getting the apple software update asking if its ok to install the same version. I have said yes about five times and it keeps installing it over and over. How do I check the version on my itunes and how do I stop this update for the same version I supposedly already have?

Hey rvrivas!
This article will tell you how to find out which version you are using in iTunes:
iTunes: How to find which version you are using
http://support.apple.com/kb/ht1208
If you are already upgraded to the newest version and the issue continues, you may need to completely uninstall and reinstall iTunes on your computer, a process which affects your iTunes software but leaves your music files intact:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

After installing Mavericks I started to receive my email over and over again.

(Mail on Mac) I am experiencing a disturbing problem I can't find a previous mention of. Hopefully there's someone who has already been able to solve this.
My email is, on my wish, (Webmail UPC) not removed from my providers server after download, this for security reasons. I suppose after installing Mavericks the following event repeats itself again and again. What happens is that the email messages received are first seen in their correct alias(account) under/in the Incoming box. Next the same messages (after a period of time or/and after one or more times restarting Mail, this is unclear) are received again within an alias of that account, however the re-received message can be delivered in another alias(account) for example, an emailaccounts given alias, lets say, alias 1a receives a message again... while the original message was addressed to that emailaccounts alias 1b or 1c etc. But alias 1a also gets the message sooner or later. Thus I keep receiving the same messages over and over again in time. Does anyone recognize this problem and even better is there a solution. Thanks.

Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

HT201398 iphone keeps asking for apple id over and over when trying to update or download apps

Each time I try to update or install new apps, I keep getting asked over and over for my Apple ID. I enter it correctly and then nothing happens.

Settings app > iTunes and App Stores > {appleID} > sign out, then sign back into your ID.

ITunes asking for Password over and over, wont open, won't quit

Hi All... My MAC is Driving me mad, please help!!!!
I'm pretty sure this is a Cookie problem from some of the other threads I've found and because it started shortly after insaling "Safari Cookie" - which I have now removed.
Senario is;
If I dare to open iTunes 10.6 (latest one) it will open ok then ask for my Apple ID and PW which I enter again and again and again... sometime with a Remember box (which I tick) and sometimes not.
I have persisted with this wondering whether it will have an end when maybe all of my DL songs are individualy recognised perhaps, but after pasting it in well over 100 times I gave up. I've also tried Cancelling the request but it just keeps asking me over and over untill it crashes.
On one thread I saw that it could be because the something in the way iTune Store's PW are formated/storeage/processed has changed and I should go to to the iTunes store and reset my PW, but if I attempt to open the iTunes Store iTunes crashes - evertime so I can't do it. I did manage to reset it by clicking Forgot PW but after changing it no it made diference.
Inscidentally, when it does crash, it reopens whether I click "reopen" or not. If I quit, it reopens, if I fource close, it reopens. To reboot I have to Restart, Force Close, Force Close Force Close untill the Restart App gets to close when Itunes is in it's DownTime of the loop.
Just thought of something odd too.... after doing the PW change online, I tried entering the new one (over and over for a while) and then looked at the keychain and it still contained the old PW.
I've tried reinsalling iTunes, deleting all cookies and the Keychain PW (not the certificate as I'm worried I'll loose my perchased stuff?). Changing PW in Apple.com, changing Cookie settings in Safari to "accept all", used Onyx to repair boot and done all the automated maintainance/cleaning/permissions.
I can't think of any other useful info... but ask anything you need to know and please help if think you can!!
Thanks
James

Ok after a nice clean Lion instal taking forever and reinstalling the world it STILL HAPPENED!!
Seriosly? .. AAAaaaarrrgh!!
But then this came along -
https://discussions.apple.com/message/17023569#17023569
Sorted!!
Yes, one small tick in a small box was driving me round the efing twist!!
Well done that man!!

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4

OS is asking to install already existing printer driver over and over again

Similar Messages

Maybe you are looking for