OS is loaded and running but screen freezes on the loading screen

My laptop is freezeing on the loading screen but the os is loaded and running. I know this because i was able to use command keys to open itunes and play music. At first i thought it was the hard drive so i replaced it and i am still having the same problems. I'm stumped, can anyone help me?
Some one please help?

"The gray boot screen with the apple and the loading ring."
"i was able to use command keys to open itunes and play music."
You could do that from the "gray boot screen?" Didn't know that was even possible!
Disconnect all devices from your computer and do the following:
Boot up from your install DVD and run *"Repair Disk"* from the Utility menu. If you are able to reach the desktop after doing the above, repair permissions and restart your computer afterwards.
!http://i50.tinypic.com/izvwo1.gif!

Similar Messages

TS4002 I have opened iCloud from setting on my iPhone, it accepts the user and pwd but then freezes at the terms & conditions page

I have opened iCloud from setting on my iPhone, it accepts the user and pwd but then freezes at the terms & conditions page

Try deleting the account, then signing back in.

OMS is up and running but unable to get the console page through web browser

Hi All,
I have a wierd issue here. I have my OMS running successfully, but I am not able access it through HTTPS connection in web browser. My version of OEM is 11.1.0.1
It was working till yesterday, I am not sure what happened suddenly that its not accessible anynore.
I can successfully start and stop my OMS and it gives the status update also .
Also, my agents can not connect to the OMS , I see that last succesfull OMS heartbeat is not current .
Any advice for the places to look in will help. I tried to find the logs under sysman but nothing was there. Also , since I am able to start and stop the OMS successfully I dont have error logs.
I believe in 11g , when we start OMS , HTTP services also start ? , still I am unable to access it.
Let me know if any of you can you guide me through it.
Thanks,
Krishna.

Looking over you configuration, it looks like you perhaps have a typo in your weblogic-ejb-jar.xml resource reference. In your weblogic-ra.xml you have defined the JNDI name to be MctEIS11/connFctryCCA but in your resource reference in the weblogic-ejb-jar.xml, you have defined the JNDI name as MctEIS11/connFctryCCA1. In applications where we have an RA and EJB clients, these JNDI names are usually defined as the same and we take advantage of the fact that the resource ref definition in the EJB descriptor makes the resource application scoped (vs. global scoped) so we will usually do application scoped JNDI lookups from within the EJB (i.e. ctx.lookup("java:comp/env/MctEIS11/connFctryCCA")). We do this because we support the WL production redeployment feature which defines as a best practice that all application references be defined at the application scope so they are self contained and not shared between multiple versions of the app that are deployed simultaneously. Your situation may not require use of application scoped lookups so I do not want to give you the impression that it is required. Just sharing our configuration in hopes that it may help you resolve your issue.

It compiles and runs, but scrollPane doesn't work.

Bah. Why doesn't my scrollPane work? It compiles and runs but my scrollbars for the text area are nowhere to be found. This is the code I'm using to handle my scrollpane.
public Display() {
               setLayout(null);
               setPreferredSize(new Dimension(270, 300));
               setSize(270, 300);
               items = new JTextArea(5, 5);
               items.setBounds(5, 5, 270, 260); //x,y,width,height
               items.setEditable(false);
            JScrollPane scrollPane = new JScrollPane(items);
            scrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
            scrollPane.setVerticalScrollBar(new JScrollBar(Scrollbar.VERTICAL));
            JScrollBar vScrollBar = scrollPane.getVerticalScrollBar();
            vScrollBar.setAutoscrolls(true);
            scrollPane.setVerticalScrollBar(vScrollBar);
            add(scrollPane, BorderLayout.CENTER);
               add(items);
               amount = new JTextField(".00");
               amount.setBounds(5, 275, 266, 25);
               amount.setHorizontalAlignment(JTextField.RIGHT);
               amount.setEditable(false);
               add(amount);
          }I'm also having a problem with this one. Apparently, my I uncomment this, the compiler says "cannot find symbol getImage()" which is odd because I've imported the proper package with this method.
private ImageIcon icon = new ImageIcon("BKLogo.gif");
          public void paintComponent(Graphics background)
               background.drawImage(background.getImage(), 0, 0, null);
               //setOpaque( false );
               //super.paintComponent(background);
               }

You know what you need to do then: post an SSCCE (Short, Self Contained, Correct (Compilable), Example). For info on what this entails, look at these two sites:
http://javafaq.mine.nu/lookup?22
http://www.physci.org/codes/sscce.jsp

Screen turns black, computer is running, but screen stays black...

Hi Everybody, i could do with your help...
I will try to discribe the problem,.. if the screensaver comes on after 15 minutes, and i try to wake the computer, the screen turns black, like it would when turned off... you can hear the computer is on and running, but nothing on the screen, touching the mouse pad, or any button on the keyboard will not wake the computer... if i than close the lid, i can see the little white light and when i reopen the lid.. nothing.. sometimes briefly like a millisecond or so, you can see the screen on, but than goes to black again....
Any ideas??
it does not happen when working on the computer, only when it comes out of screensaver, or if left alone for longer than 30 minutes or so.... really strange...
Anyway, your help is appreciated!!!

Harry,
Did this just start happening after your update to 10.6.3? There is a thread over in the OSX Snow Leopard area about the backlight not coming back on after sleep that might interest you. Here is the link ( http://discussions.apple.com/thread.jspa?threadID=2384628&tstart=0 ).
Hope this helps,
BCB

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Up and running, but veeeerrry slooowwwly

I've got an Xserve I set up recently. It's an Open Directory Replica and is bound to Active Directory (DNS is also hosted by Active Directory). It's running, it responds just fine to pings, the DNS responses for the IP and hostname are coming back fine.
However, there are many things it has trouble with. For starters, if I try to connect to it with Workgroup Manager or Server Admin, it's extremely slow, even when run locally. It will also choke frequently, posting an error telling me to refresh the display.
iChat server is up and running, but any client I try to connect to it -- iChat clients on MacBooks or Spark clients on PCs -- says the host can't be found. Meanwhile, the same settings work when connecting to an Xserve in another campus which is configured the same way. I'm also trying to get iCal server up and running, but it keeps saying a virtual host can't be found, and again, near as I can tell, the required services are set up the same way on our first server, the OD Master.
I don't know if it's related, but logins for our MacBooks are also extremely slow, and we frequently get the login box shaking at us. (I've had a few teachers jump in their car and drive down the street out of network range so they can log on with their cached mobile credentials because it's faster and more reliable.) We don't seem to have the same problem at our high school campus, where the laptops are configured the same way. Clients are bound to the local Xserve and to Active Directory, and the OD server is before AD in the search order.
The only difference in setup between this one and our last is an Apple software engineer set up our first one, so I'm worried I may have missed something. There is no firewall configured, and the changeip command indicates I'm not having any host/IP conflicts. I'm kind of an Apple rookie, so I'm kind of at a loss as to what to look for next. Any help would be greatly appreciated!
Thanks,
Mike Oliveri
Tech Coordinator
Roanoke-Benson CUSD #60

I feel like I'm getting closer. First, the connector on our cable didn't fit snugly. Tug it slightly and it lost contact. I put a new cable on the server and now it seems more robust. Server Admin opened faster, anyway.
In the Console, I'm seeing some Kerberos errors:
8/31/09 10:00:17 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 5 seconds
8/31/09 10:00:17 AM com.apple.KerberosAutoConfig[892] Couldn't find KerberosClient config record
8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
8/31/09 10:00:43 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 10 seconds
8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
8/31/09 10:00:44 AM com.apple.DirectoryServices[26] [2009/08/31 10:00:44, 0, pid=902] /SourceCache/samba/samba-187.8/samba/source/libads/kerberos.c:adskinitpassword(228)
8/31/09 10:00:44 AM com.apple.DirectoryServices[26] kerberoskinitpassword [email protected] failed: Preauthentication failed
8/31/09 10:00:45 AM com.apple.DirectoryServices[26] [2009/08/31 10:00:45, 0, pid=902] /SourceCache/samba/samba-187.8/samba/source/libads/kerberos.c:adskinitpassword(228)
8/31/09 10:00:45 AM com.apple.DirectoryServices[26] kerberoskinitpassword [email protected] failed: Preauthentication failed
8/31/09 10:00:46 AM com.apple.KerberosAutoConfig[909] Kerberos configuration is up to date
This server is bound to Active Directory (using Directory Utility -- don't know if I need to do it elsewhere?) and I'm not sure what was trying to authenticate at that time.
My error messages for "server not found" have gone away for my iChat client, but now it just pops up the authentication window over and over when I try to log in. I'm wondering if there's something missing in the server binding?
Mike

Got my website up and running but lightbox is not working properly

Hi Everyone,
I got my website up and running, but my lightbox isn't working properly. The descriptions of each painting is missing and the arrows and slideshow function is missing. I don't know what I did wrong.
The link to the website is below.
http://www.sainteustacefineart.com/Gallery%202.html
The gallery is supposed to look and function like the gallery in the website linked below.
http://www.labelsnlogos.com/
I also did this website, so I'm at a loss as to what went wrong.
Thanks!
Ellen

Okay, I got it working. I forgot to "put" the JS folder (which holds the Clearbox components). Something I overlooked because it was on the bottom of the files window and I didn't see it.

I dropped my iPhone 5s yesterday and then I picked it up but I couldn't unlock it. I have a password but only half of the screen is working I couldn't press anything on the right half. So I turned it of and on but it is still the same

I dropped my iPhone 5s yesterday and then I picked it up but I couldn't unlock it. I have a password but only half of the screen is working I couldn't press anything on the right half. So I turned it of and on but it is still the same. The screen look perfectly fine but I can press the numbers 3 6 9 or cancel

Take it to your closest Apple store and have them look at it.

Downloaded Movies suddenly not working. Appear to be running but screen blank. Music works OK

Downloaded Movies suddenly not working. Appear to be running but screen blank. Music works OK

Hi Dingo1936,
That's unusal that downloaded movies would stop playing correctly. Try running through the troubleshooting article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
-Jason

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

I can run a slide show using apple tv and itunes but can't get the slides to run in a specific order

I can run a slideshow (of pictures) using Apple TV and ITunes but can't get the pictures to run in the order I set them up with in my hard drive directory

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

Edge Inspect installed and running, but icon in chrome is grey (chrome version 42.0.2311.135 m). What is the problem?

Edge Inspect installed and running, but icon in chrome is grey (chrome version 42.0.2311.135 m). What is the problem?

By the way: within Edge Code CC the same problem appears (Edge Inspect seems not to be switched on).

I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000?

I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard. Quicken 2006 on my new laptop runs, but will not recognize the old data qif files. What version of quicken for mac will recognize files from 2000? Or, is there a special procedure I should be following?

can't open Quicken 2000 files in classic mode on new MacBook Pro version 10.6.7

RemoteFX configured and running - but still very slow

Hello!
The goal:
To install and test RemoteFX performance before purchase expensive server/vga.
The success so far:
installed and configured Windows 2008 R2 SP1 with Hyper-V
installed and configured Windows 7 Enterprice SP1 virtual machine with RemoteFX video adapter enabled
running Windows 7 SP1 client with the supported version (7.1) RDP
successful RDP connection and confirmed RemoteFX running (the shut down button + event with ID:2 on the VM and so on)
no errors/warnings in the event viewer, RDP client is 10mbit or more etc.. all settings seems to be perfect.
The hardware used (I know it's not a real server, but the idea is to "feel" the RemoteFX performance before purchase and for a single VM it's quite enough):
AMD 6800k (SLAT enabled) cpu
nVidia GTX560 1G GDDR5 (also tested with ATI R7 240 2G)
8g DDR3 2400mhz memory
The problem:
The performance is.. let say the same as with the normal RDP connection. Pretty much no difference.
I checked almost every problem on the internet related to the RemoteFX, but without a single log/message I just can't do more.
The VGA is not Quadro/FirePro.. but from what I saw, the people are just using normal cards without any problems and for test purposes should be fine.
I also tried to install the cap driver (dism / ...), without any difference (actually I'm not 100% sure that this is needed, can someone explain?).
I'll be happy if someone can point me the way I can "debug" it.
Best!

So I was typing out a long detailed reply indicating how I was seeing exactly the same issues, and why I was pretty sure it was happening for all of us.
However, it now appears that I've been able to get it up and running pretty well. Like the OP, I am simply using desktop hardware at first to test it out but here's what I'm working with:
Windows Server 2012R2 with 8.1 Enterprise VM connecting using an 8.1 Pro machine.
AMD FX-8150
16GB DDR3
120GB SSD
Radeon HD6950 - 1GB
Asus M5A99X EVO R2.0 Motherboard
When I was seeing the issues you all are seeing, it was when RemoteFX was working fine. This was verified by dxdiag and openhardwaremonitor on the server itself watching the GPU utilization rise while rendering the fishbowl.
However, another thing I noticed was that due to the AMD software of desktops (what I have installed on the windows server itself), the CPU and GPU both clock down to conserve power. Because of this, the one VM wasn't enough to raise them both to max. Once
I forced the CPU and GPU to both stay at max frequency, everything runs pretty amazingly. VM is using 4 cores, No limit on RAM (hits about 4GB max), vGPU is set to 3 monitors at 1920x1080, and a 35GB chunk of the SSD. Here's what I see now:
HTML5 Fishbowl - Fullscreen at 1680x1050 on Auto makes it to 250 fish at 60FPS
HTML5 Fishbowl - Windowed at about 1/3rd size Auto makes it to 850 fish at 60FPS
Borderlands 2 - Able to install, use XBOX controller with USB Passthrough at about 25FPS at 1280x1024.
I would also like to point out that the biggest bottleneck it seems is actually the VM's ability to encode the data stream sending to the client at the far end. Evidence of this is shown by just taking a window and placing it over the fishbowl (I used the
task manager). Once you cover some of the fish, you'll see the framerate go up fairly significantly. (since not as many pixels are changing, and so there's less traffic to send).
Anyway, just thought I'd share! Hope you're all doing better on this!

OS is loaded and running but screen freezes on the loading screen

Similar Messages

Maybe you are looking for