OS level command to split the file

Hi
I am processing large file.. I am using OS level command to split the file file i have given the following command to split the file
my file is /update/inbound/test/file.txt
i have given the following command in OS level command option
split -l 2000 /update/inbound/test/file.txt...
but i didnt see any splited files under this directory
How to write a command to split the file
Regards
Sowmya

Hi,
Have you tried with split /update/inbound/test/file.txt
Split can take a second filename on the command line.
Refer the exact syntax
http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds5/split.htm
Before applying it check , that if it works with your FTP, as this is Linux based command.
Thanks
Swarup

Similar Messages

I need command to change the file name in vi please.

quick question
i need command to change the file name in vi please.
oldname = initprod12.ora new name = initprod2.ora

SQL> startup;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/usr/oracle/oradata/dbs/initprod2.ora'
SQL> !
[oracle@oracle2 ~]$ cd /usr/oracle/oradata/dbs
[oracle@oracle2 dbs]$ ls
ab_ASM2.dat hc_prod12.dat initASM2.ora init.ora orapw+ASM2
hc_+ASM2.dat hc_prod2.dat initdw.ora initprod12.ora orapwprod12
[oracle@oracle2 dbs]$ exit
exit
SQL> startup pfile='/usr/oracle/oradata/dbs/initprod2.ora';
LRM-00109: could not open parameter file '/usr/oracle/oradata/dbs/initprod2.ora'
ORA-01078: failure in processing system parameters
if i change the name of initprod12.ora to initpord1.ora , will my problem be solved?

Split the file in the batches of 1000 records

Hi,
I need to read a fixed length file from SAP system and then have to send the file which is combination of a huge number of records (e.g 100000) in the batches of 1000 records each to the target system.The target system which is a third party has a constraint of accepting only 1000 records in a file.
What is the best approach we may use here to split the file in the batches of 1000 records and then send the file to the target.
Kindly suggest.
Thank You.
Regards,
Indu Khurana.

The adapter will will take care this and split the input file (message) into smaller message batches (set to the number of records defined by you, say 1000). Each of these smaller batches will be processed as per your design and configuration. For example a straight through sender and receiver will have the sender splitting the input file into batches of 1000 messages which will be delivered to your receiver. You could also add a timestamp or the like to stop the file being overwritten at the destination.
Regards,
Mike

Splitting the file

Hi
I am having a large file . How can I split the file parts by parts say many parts each having 1MB and load into the memory and do some parsing .Is it possible using java APIs .
Thanks and Regards
Suneesh

I will clarify my doubt . My file is say 100 MB . But I cannot load the 100Mb at a time can I load the file by 1MB 100 times and do my parsing inside the content ??
Suneesh

FMLE Splitting the file every 7MB

I have had some issues with getting my computer up and running with FMLE and a Blackmagic DeckLink SDI card. I've switched to the DeckLink Studio card and it is working fine so far with one exception. It splits the file everytime the file size reaches 7MB. Has any one had any experience with this?

Have you checked "Limit by Size" checkbox below "save to file". If then please uncheck that checkbox because it splits the file after mentioned size limit.
Also Are you seing any message like "Unexpected error occured" in FMLE Encoding log tab?

Operating system command to zip the file

Hi Experts,
I got proxy to file scenario, i can place the text file successfully in reciever side, i want to zip the file in reciever side using operating system command option in reciever Communication Channel.
Can anyone please give me the operating system command to create the zip file in reciever side.
Kind Regards,
Praveen.

Hi Praveen,
>>Can anyone please give me the operating system command to create the zip file in reciever side.
Why OS commands and not the PayloadZipModule?
If you need OS commands check this blog of Michal /people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Update
You can try this command too
cmd /C "jar cMf \\<folderpath>test1.zip \\<folderpath>*.*"
Regards
Suraj

Pressing command-z deletes the files even if there is no restore location

I have copied some photos from sd card to my mac. Then I deleted the files from sd card and removed it to take more photos. While my friend was taking pictures somehow accidently I pressed the command-z. Then whole folder just disappeard. I didn't even get any notification that telling me "cannot find restore location" or " files will be deleted". Folder just disappeared in 1 second. They are not in the trash also.
Where did they go? Are they in some sort of temporary storage? How can I get them back?
SD Card is already full with other images so recovery program couldn't bring the old files back. Recovering on the computer might take so long time since I have 500gb hard drive. Is there a fast way to get files back?

I cannot try it now for that folder since i did other copy oparations. But I did it with another file to try. I copied file from usb drive. Then I removed my usb drive and pressed command-z. File disappeared then I pressed command+shift+Z. A notification popped up "The operation can't be completed because it isn't supported".

Need to validate file Name,split the file name and store the splited values into Variables

Dear All,
Below is the my requirement.
I have a folder, in that folder I have bunch of text files. The file name is below format
ACA_122_pay_20140430_001
Initially the file name start with ACA code,groupid,group name and date time stamp. This is the standard structure of file name.
I want to check each and every file in the folder with this structure. The structure should be standard for all the files. If the structure same for all files I need to get codes form file name. For example
If you see the below file name, I need to get ACA and put into variable,I need to get 122 and put into variable. For group name and date time needs to put in variable.
If the file format is not valid state then I need to log exception.
Let me know if I am not clear.
Kindly provide the C# code for achieving the above requirement.
As I am new to .net programming. kindly help me.
Thanks in Advance,
Regards,
Madhava Ganji
Madhava Ganji

Hi MadhavaGanji,
I have post how to validate the file name, header row against definition table which stored the file name and column definition.
Take a look and see if this is helpful.
http://sqlage.blogspot.com/2013/11/ssis-validate-file-header-against.html
http://sqlage.blogspot.com/

What is the command to change the file permission of all the files in a directory recursively?

I know it is chmod -R <permission> Files/directory_name in unix/linux. Tried the same format but not getting the desired output.
Any suggestion about the format of command in Solaris ?
chmod <permission> filename is working but not chmod -R <permission> directory_name doesn't.
Thanks
Shashank.

This command is correct. What is the result of the command if you run it ? What is the command that you use ? And which file system format is it ?

System (Runtime) execute command for copying the file

Can any one tell me what is wrong with this - it throws an IOException
String sourcepath = "C:"+File.separator+"pbx"+File.separator+"mantra"+File.separator+"vvvvv.mp3";
String destinationpath = "C:"+File.separator+"rrr"+File.separator+"mantra"+File.separator+"mantra.mp3";
Runtime rt=Runtime.getRuntime();
try{
String command="C:"+File.separator+"windows"+File.separator+"command /c copy "+sourcepath+" "+destinationpath;
System.out.println(command);
rt.exec(command);
}catch(IOException ex){System.out.println("exception "+ex); ex.printStackTrace();}
output:-
C:\windows\command /c copy C:\pbx\mantra\vvvvv.mp3 C:\rrr\mantra\mantra.mp3
exception java.io.IOException: CreateProcess: C:\windows\command /c copy C:\pbx\mantra\vvvvv.mp3 C:\
rrr\mantra\mantra.mp3 error=2
java.io.IOException: CreateProcess: C:\windows\command /c copy C:\pbx\mantra\vvvvv.mp3 C:\rrr\mantra
\mantra.mp3 error=2
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:66)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:566)
at java.lang.Runtime.exec(Runtime.java:428)
at java.lang.Runtime.exec(Runtime.java:364)
at java.lang.Runtime.exec(Runtime.java:326)
at Test.main(Test.java:82)

this is clear one...
String sourcepath = "C:"+File.separator+"pbx"+File.separator+"mantra"+File.separator+"vvvvv.mp3";
String destinationpath = "C:"+File.separator+"rrr"+File.separator+"mantra"+File.separator+"mantra.mp3";
Runtime rt=Runtime.getRuntime();
try{
String command="C:"+File.separator+"windows"+File.separator+"cmd /c copy "+sourcepath+" "+destinationpath;
// String command="copy "+sourcepath+" "+destinationpath;
System.out.println(command);
rt.exec(command);
}catch(IOException ex){System.out.println("exception "+ex);
ex.printStackTrace();}

OS level command before message processing

Hello
I am getting the files from the SFTP server through the shell script and expecting to be processed by my File sender adapter.
I have configured my File adapter which will poll the directory into which the shell script gets the file and it is scheduled at say 60 sec duration and i had configured OS level command before message processing.
But when i monitored my communication channel and also my directory I found out that its not executing the OS level command. I tried dropping the dummy file into the directory. This time when checked in comm channel monitoring, it executes the OS level command and gets the file from the SFTP server and adapter polls the SFTP file as well. But i don't want to use dummy file each time.
Is there any way by which we can always make adapter to execute OS level command. I tried various options like Process Empty files etc etc but no luck.
Thanks in advance.
regards
rajeev

Rajeev
How about placing a dummy file of 0 bytes, setting up the 'Handling of Empty Files = Don't create message', Processing mode = 'Test' and then writing a post operating command script as well, to move all the files to archive directory except the dummy file.
Not a clean solution but just a thought.
http://help.sap.com/saphelp_nw70/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm

Program to split archive files

Hi, I need a program that will allow me to make archives of Final Cut project files so that I can burn em to multiple DVDs. The only program I could find was Machacha and unfortunately, you can only split single files into pieces, if you drop a .rar or a .zip with all the files I need contained within, it just extracts the files. So I even tried dropping a folder, but that doesn't work either.
Anyone know what apps there are to create multiple file archives, so that if I need these files again I can rejoin them from separate DVDs or other storage locations?
Thanks in advance

You can do this with the Disk Utility and Terminal applications. Make a disk image to store your FCP project files. Then use the Terminal application to run a command to split the file up into segments:
<pre class="command">hdiutil segment -o segtest -segmentSize 33m GarageBandJampack4.dmg</pre>Running that gave me 5 segments for the archive:
<pre class="command">created: /Volumes/Small Partition/segtest.dmg
created: /Volumes/Small Partition/segtest.002.dmgpart
created: /Volumes/Small Partition/segtest.003.dmgpart
created: /Volumes/Small Partition/segtest.004.dmgpart
created: /Volumes/Small Partition/segtest.005.dmgpart</pre>
The breakdown of the command is this:
hdiutil - the name of the command.
segment - create segments from an existing disk image
-o segtest - the output file name of the first segment
-segmentSize 33m - size of the segments you want. (Use "g" for gigabytes).
GarageBandJampack4.dmg - The disk image you want to split up.
When you want to rejoin your pieces, you copy them to the same folder and double-click on the first segment...
charlie

Adding Multiple files to many Sharepoint Sites based on the Sites Code (Splitting the data using a code)

Hi,
I'm pretty new to Sharepoint and wanted to ask a question to see if it can actually do what we need it to do.
We would have a top Site within a collection and under this we would have 400 sites for different sections of the business (External) Lots of teams create documents for all these sites and use the Code of the site in each document so we know what business
site its going to. For example 67890_BusinessReportMay.docx We know this document should be heading to site 67890
We have lots of services sending data to these 400 business sites. If we were to do them manually it would take most of our time to go to each site and upload the documents, even if we could do all the sites documents in 1 multiple upload. We still have
to go to each site to do it
Is there an easy answer to this? At present I have folders to match each of the 400 Sharepoint Sites and I use an Integration Services package to move all the documents into these 400 Matching folders. I do this using the Code at the start of each file name.
If it doesn't have a code its put into an error folder and reported back on.
Then I want something to automatically go through each of these folders and load them into the Sharepoint Sites document libraries.
OR
Say you have 600 files all going to the 500 sites on Sharepoint in one folder. The File contains meta data regarding the Sites Code. Using this you can split the files and automatically pull them across to the Sharepoint Sites without having to go
into each Sharepoint Site?
I'm thinking that you cant do this and I'm hoping I'm wrong. Any help would be greatly appreciated.
Debbie

Hi Debbie,
According to your description, my understanding is that you want to move the documents to different sites based on the code in the name of the files.
I recommend to create workflow and set the workflow to start when an item is created to achieve this goal.
As there is no built-in action which can move the documents cross site, we need to use the custom activity 'Copy List Item Extended' which need to be downloaded from
http://spdactivities.codeplex.com/.
Please per the steps in the link below to deploy the custom activity to SharePoint:
http://social.technet.microsoft.com/Forums/en-US/82609160-152f-461a-9a19-0e996f5a309b/sharepoint-2010-archiving-the-files-from-one-document-library-to-another-document-library-in
After that, we can create a workflow to meet the need.
Here is the detailed steps to create the workflow:
Create a column in single line of text type(called NO for example) in the library where the documents are uploaded, and input value manually in the column to store the code when uploading the documents. (We can also use workflow to extract the code from
the name of the documents if the codes are always 5 numbers.)
Create a workflow associated with the library and set the workflow to start when an item is created.
Select If current item field equals value, change the settings to be If Current Item: NO equals 67890.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at site 67890 URL.
Select Delete Item, change the settings to be Delete Item in Current Item.
Create other conditions from step 3 to step 5 to copy the documents to different sites and delete current documents.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Splitting a file based on the payload field - multimapping

HI Everyone,
I have a requirement of splitting a file based on the field .
e.g When I am a file as :
row1 David    US
row2 Cindra   US
row3   Peeru   CA
row4   Jay       CA
Then, I have to split the file into two files, one file with the US rows and another file with the CA rows.
There can be many countries in the input file, so number of target files need to be generated is not fixed.
I have gone through the below links :
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible   ( in the blog we know that there are two receivers but in my case I dont know that )
https://bond.newellco.com/irj/scn/,DanaInfo=www.sdn.sap.com,SSL+thread?messageID=6449801#6449801
( Everyone is providing JAVA mapping as a solution....)
Is Java mapping the only option to resolve the problem case I have ?
Thx
PEERU IN

Hi Peeru,
I don't have access to the any FTP or file server of XI to check the file adapter as i am travelling right now(I am 100% sure that the file adapter splitting will work as i have done this for one of my requirement).
Coming to your requirement:
I wrote an java map which will read the XML file and create the multiple recordset based on number of different country exists in the file, then i am printing the final structure in an multi mapping layout (please see the attached input file Country.xml and out put file which the java map generated Final.XML) if we do this i think the file adapter will create the different files based on the number of recordset we have as you can see the output file is generated with the 3 recordset (<Country>) tag each country tag has its own records, now if i give the filename in variable substuition pointing to region then i think i should get 3 files with names
us.xml
us01.xml
us02.xml
i think by using the multi mapping i can generate 3 files and by using the variable substution i can give the 3 different names from the payload of each file and also can add the timestamp for each of the file, again i didn't have access to the file adapter in the project i am working on so i couldn't verify in XI server, but if you still looking for solution then let me know i will give the map details.
Input File: Country.xml
<?xml version="1.0"?>
<check>
     <order>
          <name>Nisar1</name>
          <region>US</region>
     </order>
     <order>
          <name>Nisar2</name>
          <region>US</region>
     </order>
     <order>
          <name>Nisar3</name>
          <region>US</region>
     </order>
     <order>
          <name>Nisar4</name>
          <region>US01</region>
     </order>
     <order>
          <name>Nisar5</name>
          <region>US01</region>
     </order>
     <order>
          <name>Nisar6</name>
          <region>US01</region>
     </order>
     <order>
          <name>Nisar7</name>
          <region>US</region>
     </order>
       <order>
          <name>Nisar8</name>
          <region>US</region>
     </order>
       <order>
          <name>Nisar8</name>
          <region>US02</region>
     </order>
</check>
Output File : Final.XML
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <country>
               <Order>
                    <name>Nisar1</name>
                    <region>US</region>
               </Order>
               <Order>
                    <name>Nisar2</name>
                    <region>US</region>
               </Order>
               <Order>
                    <name>Nisar3</name>
                    <region>US</region>
               </Order>
               <Order>
                    <name>Nisar7</name>
                    <region>US</region>
               </Order>
               <Order>
                    <name>Nisar8</name>
                    <region>US</region>
               </Order>
          </country>
          <country>
               <Order>
                    <name>Nisar4</name>
                    <region>US01</region>
               </Order>
               <Order>
                    <name>Nisar5</name>
                    <region>US01</region>
               </Order>
               <Order>
                    <name>Nisar6</name>
                    <region>US01</region>
               </Order>
          </country>
          <country>
               <Order>
                    <name>Nisar8</name>
                    <region>US02</region>
               </Order>
          </country>
     </ns0:Message1>
</ns0:Messages>
regards
Nisar Khan

Error while sending the file to GXS

Hello,
I need to send the file to a bank which is using a GXS server.
GXS uses a VAN networ and it is expecting a specific command to place the file on it's server.
The put command is -
boldput localfilename %localfilename%SECUPGPENA%GPEXRIP%%B
I tried using the following command at "Run Operating System Command Before/After Message Processing"
bold"put %F %%F%SECUPGPENA%GPEXRIP%%B" .
But the files are not being transferred.
I believe that I need to replace the actual message processing command by the given command by writing a script and calling it.
boldQues 1. Has anybody faced this scenario and found a solution?
boldQues 2. - I want to know if we can transfer the file to VAN through the normal XI FTP adapter. If yes, then how?
boldQues 3. - In case if the FTP adapter can not be used can we use any specific Seeburger VAN adapter?
Regards,
Mayank

Hello,
I need to send the file to a bank which is using a GXS server.
GXS uses a VAN networ and it is expecting a specific command to place the file on it's server.
The put command is -
boldput localfilename %localfilename%SECUPGPENA%GPEXRIP%%Bbold
I tried using the following command at "Run Operating System Command Before/After Message Processing"
*bold"put %F %%F%SECUPGPENA%GPEXRIP%%B" bold
But the files are not being transferred.
I believe that I need to replace the actual message processing command by the given command by writing a script and calling it.
boldQues 1. Has anybody faced this scenario and found a solution?bold
boldQues 2. - I want to know if we can transfer the file to VAN through the normal XI FTP adapter. If yes, then how?bold
boldQues 3. - In case if the FTP adapter can not be used can we use any specific Seeburger VAN adapter?bold
Regards,
Mayank

OS level command to split the file

Similar Messages

Maybe you are looking for