OS lion can't find my samsung galaxy s i90000 when i plug it into the Mac. I don't want to/cannot use Kies, that programme *****.

I just bought a iMac, OS lion, and I want to send the photo's from my Samsung Galaxy s i9000 to my mac but it doesn't see the connection. (USB cable).
I finally succeeded in downloading Kies (isn't compatible with Lion) but that doesn't work either. Isn't it possible to just move my pictures from the phone to my Mac with Finder?

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

Similar Messages

  • Can I download iTunes to a gateway laptop and pull up my library from it a as well? My ipod nano 7thgeneration is staying "do not disconnect" when I plug it into the USB in my truck. I am using the USB cord that it came with.

    i had my iPod nano plugged into the USB in my truck about a week ago and it worked. All I had to do was press the AUX button. I went to use it yesterday in my truck and the iPod says do not disconnect while my truck says audio player not found. I called apple support and he said my iPod needs to be restored, so I need to retransfer the music from my library onto my iPod again. Downfall, I no longer have access to an apple laptop because my brother lost the cord to his. Please help.

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • My 160gb Ipod Classic just deleted itself of all its 13000 songs when i plugged it into the mac! how can i get them back?? ive connected it to this computer 100's of times.

    my 160gb ipod just deleted its whole contents and keeps error-ing when i try to upload more songs to it! is there some way i can get them back, i dont have 2/3 of them stored as backup! hellpppppp!?!

    You may not have a backup of those files, then.  Have you checked for backup according to this knowledge base article:
    http://support.apple.com/kb/PH1779

  • HELP!  I had iPhoto on my mac, for some reason it was not responding down loaded a new version but can't find my photos. any ideas please.  I thought once on the mac always on the mac.

    HELP!  I had iPhoto on my mac, for some reason it was not responding or damaged.   down loaded a new version but can't find my photos. any ideas please.  I thought once on the mac always on the mac.

    Sorry but we need details to help
    What version of the OS do you have? What has changed since iPhtoo worked?
    What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
    look in your applications folder - is there an Iphoto application there? If so get info and report the version
    Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
    what else can you tell us that might help us assist you?
    LN

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

    Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1591

  • I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port

    I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port

    Try:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not omit the Additional Information paragraph.
    Is the iPod that connects an iPod touch? If not that does not mean anything since iOS devices like iPod touch, iPhone and iPad use different drivers than other iPods.

  • I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on

    I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on

    Is your iPhone not showing up in iTunes sidebar, or is iTunes not just launching automatically?
    The things that you can check are:
    1) Launch iTunes manually
    2) Restart or reset your iPhone (http://support.apple.com/kb/ts3281)
    3) Check your cable including disconnecting and reconnecting it on bot the phone end and the computer USB end.
    4) Reboot your computer
    5) As a last resort, take it to the Apple Store so they can check the hardware

  • I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

    I want to back up my 4S but I don't get the correct screen when I plug it into my Mac - Just iPhotos and iTunes (songs) pop up. How do I get to the screen where I can back up and restore?

    Hi Spookola,
    I don't know how that could have happened. Go through the folders for the rolls and separate the 2005 rolls from the 2006 rolls, then import the 2006 rolls.

  • I have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

    i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    iOS: Wrong passcode results in red disabled screen
    This will tell you how to restore
    iTunes: Backing up, updating or restoring iOS software
    If you cannot restore that way, you may have to use recovery mode
    iPad: Unable to update or restore

  • My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

    My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it. 

    Hello Korawees,
    I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
    Before Starting
    It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
    Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
    How to restore iPod shuffle
    Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
    Download and install the latest version of iTunes if you do not already have it installed.
    Open iTunes, and then connect iPod shuffle to your computer.
    After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
    Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
    The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
    Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
    Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
    If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
    A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
    After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
    When you come to step 7, I recommend Restore Option 4.
    Take care,
    Sterling

  • How do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

    how do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • My ipod wont turn on, the battery is full, and when i plug it into the computer it doesn't recognize it. What can i do?

    I locked my ipod then went to turn it on and nothing happened.  Even when i put it into the computer nothing happens.  what can i do?

    Try a hard reset and go from there.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT1420 I forgot what computers I have authorized. How do I find out what computers I have authorized in order to deauthorize the computers I don't want

    This is a question more for my mother. She has already authorized 5 computers, but she is pretty positive she hasn't. How do we find out how to find out what computers she has authorized, so we can deauthorize computers she doesn't want. Does it matter if it was an old computer that we don't have anymore, or is it based on accounts that are authorized?

    Sign in to the account in question, go to Account Information and under Account ID Summary, you need to Deauthorise All. Then Authorise just the computer(s) you do want.

  • My ipod was sst up/registered using my mac computer. Unfortunately, it was plugged into a pc and all my songs, pics, etc were erased. Now when i plug it into my mac to sync it, my ipod doesn't even show up in the source list. I can't restore it. Any ideas

    My ipod nano 4th generation was set up/registered using my mac computer. Unfortunately it was plugged into a pc and all my files, (song, pics, etc) were erased. When I plugged my ipod into my mac to sync it again, it wouldn't even appear in the source list. I can't even click on it to restore it. It's simply not there. Any ideas on how I can get it to appear in my source list and sync it again using my mac? Suggestions would be greatly appreciated! Thank you!
    Steve

    Which OS & iTunes versions do you have?

Maybe you are looking for

  • Read web page content via Sockets

    Hey, I have to write a program that will read web page content, using sockets. I got that piece of code and it works for most pages: Socket socket = new Socket(address, 80);           BufferedReader input =                new BufferedReader(         

  • Why do we use this.A_Class

    public class HexBoard extends Canvas implements MouseListener {     public Matrix white = null;     public Matrix black = null;     public void init() {         makeMove(0, this.white, this.black);         this.white.setValue(20, 10, 1);        //mak

  • Unwanted channels showing up in my favorites including x-rated crap

    Every time I try to use my favorites I get unwanted channels that I would never add to my favorites list

  • Anyone know how to get the templates for illustrator?

    Anyone know how to get the templates for illustrator?

  • Dump from Version 8.1.7.4 into database Version 9.2

    Hi, is ist possible to import a dump from 8.1.7.4 into a database version 9.2 ? there seems to be a problem by importing a procedure contains a function like DBMS_STATS.SET_COLUMN_STATS from the version 8.1.7.4. When i delete one parameter it works f