Os lion crashing on mac pro now and then after startup trying to open first app

Os lion crashing on mac pro now and then after startup trying to open first app like safari, nothing seems to respond then I restart it and its ok. Then after many uses it does it again.

Take it to an Apple Store.
Claypool Addict wrote:
I've tried holding r, command + option + p + r, option + r, c.
That command does nothing.
Try option/command/R
Don't press it until you hear the chime, don't release it until you see recovery loading, don't press other random combinations unless you know what they do.

Similar Messages

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • Hey plz help me out!!  i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me

    hey plz help me out!!  i am using macbook pro 10.5.8..... and was using photobooth...and then after some time i opened it and there was no green light on cam, and it displayed nothing! plz tell me how to fix it! i want to see my face again!!! plz help me

    iSight troubleshooting
    http://support.apple.com/kb/HT2090

  • I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported.  What does this mean, and how do I get back all my photos and fix this? thanks.

    I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported.  What does this mean, and how do I get back all my photos and fix this? thanks.

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know some details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what fixes have you tried?
    where is you library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • My ichat is saying that my password isn't right and then after 20 tries I get in but some of my friends say that it my account tries to request video chats to them when i am not online and sends auto reply messages when i haven't set that up. Am i hacked?

    my ichat is saying that my password isn't right and then after 20 tries I get in but some of my friends say that my account tries to request video chats to them when i am not online and sends auto reply messages when i haven't set that up. Am i hacked? This has also happened to alot of my friends on my buddy list
    is it a bug or have I been hacked

    System Preferences > Network > your-connection-medium > (Assist me) > ( Diagnostics )
    This sometimes provides additional helpful information, sometimes not so much.

  • Uploaded the new lions on my mac pro now everything is super slow

    uploaded mountain lion on my mac pro and its super slow can any one help

    Remove all items from System Preferences > Security & Privacy > Login Items
    Then restart your Mac.
    And check to see how much free space is available on the startup disk. Not enough can slow the entire system down.
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info then select Storage from the menu.
    Make sure there's never less than 15% available storage space.
    OSX Tips The Storage Display

  • Mac Pro sleeps and then wakes within a second after 10.4.11

    i just updated to 10.4.11 and now when i press the sleep button it will sleep and then wake up within a second.
    any ideas why this is happening, and a way to fix it?

    Sometimes resetting the SMC on your MacPro will fix sleep issues, as that is what settings it maintains.
     Cheers! DALE

  • I use an iPod nano 5th generation. I have had it for 2 years now and then after about a year when I plugged in my iPod to my computer, the iPod is read but the tab where I would always go that showed my list of artists to sync to my iPod does not show up

         I use an iPod nano 5th generation. I have had it for about two years now and after about one year, I plugged in my iPod into my computer to sync more music. Here is the problem: The tab where you go to sync music to your iPod and shows the list of artists and songs you want to sync to the iPod, the tab I can get to but the list of songs and artists does not show up and the only way I can sync music to my iPod is to basically wipe my iPod and start from scratch. Obviously, I do not want to do that because I do not have all the songs in my library that I have on my iPod. I have uninstalled iTunes and then re-installed it, but it did not work and I do not know what else to do. I would really appreciate helpful guidance to get it fixed if it can be fixed. Thanks in advance

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • When i turn my mac pro off and then back on it dosent load my login pic and says updated needed!!

    when i turn off my computer and turn it back on it won't load up with my login pic jus a plain screen and empty pic!
    with the words updated needed under the empty pic. however if i jus put t into sleep mode it will load up the pic as it should. bit hard to explain.

    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery

  • Buy low end Mac Pro now, upgrade later?

    Wondering if it makes sense to buy a low end 2ghz Mac Pro now, and then upgrade later (to for example, higher ghz or maybe a Clovertown cpu).
    The difference now is about $300 for a 2ghz versus a 2.66ghz, which I suppose would get me by for some time. Cpu upgrade later would mean having to sell the old cpus, can PCs use these as well as Macs? That would certainly make them easier to sell, and then buy new faster cpus or even a new processor class.

    It depends on whether you use the MacPro and applications that benefit from quad-core, from faster cpu, or whether you are memory bound.
    I rarely need or use iDVD or iLife and the 2GHz model is plenty for my needs it seems.
    I figured the cost of 2x512 extra from RAM (1GB isn't enough you really want 2GB, more if you run DTP or video editing) and I wanted to buy a 10K Raptor which I (and anyone) would find welcome addition.
    Before, my SP G4 MDD 1.25 was just not cutting it and was only an 'interim' upgrade from an even older system while I waited for something better than the 2005 G5 series.
    Also, 2GHz, for me, is fine and more than enough. If I was doing it again, I would have gotten the 2.66GHz just because it would have shipped faster
    Games? professional? bragging rights? I would never plan on having to upgrade cpu, or selling the OEM processor (might want them someday).

  • Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

    Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

    Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck.  As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.”  As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#.  Right after the root# prompt, enter the following: /sbin/fsck -fy
    If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

  • HT2090 External iSight camera video feed working fine but mic is not working Mac Pro 2009 and Mountain Lion 10.8.4

    Finally I decided to move forward and installed Mountain Lion 10.8.4 (with all the updates). Now I am facing a dilemma, my external iSight Camera  is working fine regarding the video fee but the Mic is useless. I am using a Mac Pro 2009 and a Apple Cinema Display 30". I checked all the trends about iSight External devices but no one has a really specific solution for my problem. Firewire is not longer supported with Mountain Lion? By the way my iSight was working perfectly before. So I am wondering if something wrong happened with the OS and the support for this kind of device?   I reset the PRAM, the SMC, even I reinstalled the MAC OS X Mountain Lion (10.8.4) from scratch. So I am wondering if the problem is that ML is not longer supporting this device or what is the issue here.
    Hope someone can help me with it!
    Thanks
    Jalcom          

    Jalcom wrote:... Firewire is not longer supported with Mountain Lion?...
    Not true.  External iSight works fine with my '09 Mac Pro and 10.8.4.
    Jalcom wrote:... So I am wondering if something wrong happened ...
    So it must have.
    Jalcom wrote: ... help me with it!...
    You have tried several good things, but there may be other suggestions from http://support.apple.com/kb/HT2090 that you have not yet considered.  Be sure to check more than one Apple app in more than one user account to help you pinpoint the cause of your trouble.  Then you will know what to fix.
    In addition to the Apple troubleshooting, check your  > System Preferences... > Sound > Input to verify that your iSight's mic is selected, not muted, and that its volume setting is properly adjusted.  You may need to check this again after restarting Mac or changing apps that use the mic.
    Also, be certain that the apps you are testing are configured to use iSight's mic.  Different apps select the mic in different ways.  For example, QuickTime X allow selection among various microphone alternatives via one of its preferences as shown in the image below: 
    (I was using my Display microphone and did not have my external iSight connected when I made this image.  Therefore, there is no iSight mic shown in my list of mic choices above.  If your iSight's mic is properly connected, turned on, and recognized by your Mac, iSight will show in your QTX microphone preference choice list.)
    If you are trying to use your iSight with a Flash based web site, also check your Mac's  > System Preferences... > Flash Player > Camera and Mic settings to verify that your Flash system preferences are not blocking your mic.
    Some other apps may offer mic and or camera selection via their application menus.  If you have trouble finding out how to select the iSight internal mic in other apps, check each apps' Help or post back the name of the app whose selector you cannot locate here so we can try to help.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.8.4   24" LED Cinema Display          External iSights

  • HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

    If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

  • I am running Mac OS X Lion on a brand new Mini.  Every now and then, my keyboard goes "dead."  The mouse still works but can't type.  If I restart, everything is fine again.  Is there anything that will fix this problem?

    I am running Mac OS X Lion on a brand new Mini.  Every now and then, my keyboard goes "dead."  The mouse still works but I can't type.  If I restart, everything is fine again.  Is there anything that will fix this problem?
    Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor.  The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz.  If I use HDMI to VGA input, the image is much clearer.  Is there a way to get the Displayport to work?

    I'm having exactly the same keyboard issue.  Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
    I'm seeing a great many devicemgr and rake errors in my system log.  I don't know if they're related.  How 'bout you?
    If you're unfamiliar with the system log…
    Open /Applications/Utilities/Console.
    If necessary, choose View > Show Log List.
    system.log is at the top of the FILES section.
    Try searching it for hot words like DEBUG, FATAL, and aborted.
    I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
    -Bryan

  • As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000  photograph were not catalogued correctly, or hardly at all, so now ov

    As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000  photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

    It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

Maybe you are looking for