OS Lion - Difference image quality in EyeTV with new user account?

Hi Everyone,
My computer has been crashing ever since installing Lion, mainly on the Mail app it appears, so I created a new user account and have set that up to use.
I have an Elgato Eye TV Hybrid with EyeTv for watching TV. The image settings are the same on both user accounts, but the new user account is extremely grainy. Any ideas about why it would be different on multiple accounts?

pod meister,
quite as yr office person says. It would be wrong to remove all the apps. I would not be sure what ElGato can mean when they say the test user has no apps!. Elgato (?) will need to use some apps for it's normal operation, and the more general user functions will as well. You would msee in yr 'Parentalo controls, in sys prefs pane that there are 'helper apps' that you can allow or not to any controlled user. So there are helper apps.
You can 'turn off' lots of system extensions with a special boot up but won't Elgato need some of them? It is after all the operation of Elgato that you want to test.
The usual dodgy 'apps' are starup items like so called haxies which moderate certain basic system operations. You could start by disabling the.
You might care to consider that Elagto is shoveling the blame onto 'the rest of the world' saying it 'is something else',but I may be wrong.

Similar Messages

  • ITunes does not launch with new User Account (Vista)

    One of my limited user accounts on Windows Vista because corrupt, so I created a new limited User Account and copied ALL of the files from the old to new.
    Now, when I try to launch itunes on the new user account, it will not open at all. Itunes works on my administrative account, with no problem.
    Can someone tell me the most pain-free way to resolve this issue. And, whatever solution, will I be at risk of losing my itunes libraries?
    Thank you in advance.

    Hiya. Delayed again. Browsers being cranky. (I blame the aftershocks.)
    It's actually plausible that it was installed in there (by doing a run as administrator on the installer itunes64setup.exe, perhaps). Because that suggests a possible cause for these continual permissions-related problems.
    A lot of what you're seeing is consistent with damaged ACLs (access control lists) on files, folders and registry keys. Although it's a lot rarer than it used to be, one of the ways you could get borked ACLs was if a program (like iTunes or QuickTime) was installed in one user account, and then the user account it had been installed in was deleted (or otherwise rendered unusable).
    We don't know which particular permissions are stuffed up here. But there's a shotgun approach to fixing them which used to work okay, although it's a bit fiddlier to do on a 64-bit system than a 32-bit system.
    I'd strongly recommend setting up a system restore point prior to doing this, so you can revert if things turn to custard.
    The basic technique you follow is from the following blog entry *with one important modification.*
    [Solving setup errors by using the SubInACL tool to repair file and registry permissions|http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-e rrors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx]
    The modification is that when you're editing the file to replace YOURUSERNAME with the name of the account, edit the first line so that %ProgramFiles% instead says %ProgramFiles(x86)% and after the line that reads:
    *subinacl /subdirectories %programfiles%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
    ... add another line saying:
    *subinacl /subdirectories %programfiles(x86)%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
    (The first is to make sure the commands see the subinacl, because it installs in \Program Files (x86)\ on 64-bit systems, and the second alteration is to make sure that the permissions for the 32-bit program files are fixed too.
    After doing that (it'll take a while to run), can itunes launch normally in the new account?

  • HT3309 Share mail settings with new user account on the same mac?

    I have had to set-up a new user account on my mbp to use a new piece of software which refused to work on the main user account. I want to transfer the mail settings from the original one simply so that mail opens in an identical way whichever account I'm siging in with.

    jonnyukbravo wrote:
    I want to transfer the mail settings from the original one simply so that mail opens in an identical way whichever account I'm siging in with.
    Oops.
    If you just need Mail settings, only copy
    ~/Library/Preferences/com.apple.mail.plist
    All the messages are in
    ~/Library/Mail

  • QT Macworld keynote works with new user account

    Hi,
    This is a really annoying problem, I can only watch yesterdays Macworld keynote if I setup a new user account and view using that user.
    When I login using my own user account the QT stream just times out. I have checked all my network and QT settings and they are exactly the same for both users. I have also tried reinstalling and the problem remains.
    If anyone has any idea of what could be causing this to happen I would be very greatful.
    Stephen

    This worked for me!
    http://discussions.apple.com/thread.jspa?messageID=1543453#1543453
    The fact that it works for one user and not another, I suggest looking at your locations tab in the Network control panel, and simplifying your life if you have multiple locations, and then make sure that the proxy settings (particularly the proxy.pac setting) is either reachable when you use Quicktime or not set at all. I removed it, problem solved.
    Here's the image of an empty proxy.pac setting. In the network control panel, you have to scroll down to see it, so you may have missed it when you did your comparisons:
    http://www.greebo.net/images/proxypac.png
    (PNG, 81k)
    Andrew

  • Trouble with CS2 on Mac G5 with new user accounts - activation issues?

    My system is a Mac G5 Quad running OS 10.5.8, and I have the CS2 premium suite. When I bought the machine I did everything under one user account. Several months ago the account started giving me a few problems, and my circumstances changed, so it made sense to create new, separate user accounts on my Mac for work and personal use.
    Recently I offered to help a friend out with some design work and tried to start InDesign CS2 from my new business account. I was immediately presented with a demand for a serial number. I looked it up and entered it. An error popped up that said
    "Invalid Serial Number
    The serial number you provided is not valid.
    Please check your serial number and re-enter it."
    I tried a couple more times, making sure I had it right. No success.
    I gave up and launched my original user account, launched InDesign and started the project. I set the document up and tried to save it. InDesign displayed an error stating  "Cannot save "Untitled-1" under a new name. The file "DBTmp[bunch of numbers]" is damaged (error code:0"  Each time I relaunched and tried again the temp filename was different.
    So now I suddenly am without one of my primary tools and have no idea how to get it back. I am guessing this is a problem with the activation mechanism, but can't find many resources on this topic. It would appear that my attempt to launch InDesign from my new account triggered a piracy protection code or something.
    I am typing this while waiting on hold for Adobe support. 25 minutes and counting...
    Thanks.
    Paul

    Bob, Thank you so much!
    I already have Acrobat 8.2.4, so I didn't start installing 8.2.2. However, I started working through solution 2 and discovered my new business user account was denied access to /Library/ApplicationSupport/Adobe/TypeSpt/Unicode/Mappings/.  I changed the permissions on that directory to give my account read access, and InDesign fired up like normal. I didn't even need to replace the files.
    Thanks again for the assistance.
    It's interesting to learn CS2 is not supported in my OS version. It works fine (until this).
    Paul

  • IOS 5.0 and iPhone along with "new user account"

    I do hate this hacking aspect of all software, but with iTunes especially.
    Earlier I tried to remove some duplicates in the iTunes on my old computer, but time after time they popped back from the trash can, what the heck!
    There was a running computer with my iTunes account and everything was fine. Later I even made a restore to new phone after previous phone got lost.
    Then I had to buy new laptop to replace the old as it got broken.
    As instructed, I installed iTunes onto the new computer and was able to connect my Apple Store account and purchased Apps.
    Then after I copied everything in the Apple Computer - folders and iTunes in my old (same user account name) to the new computer, now running with Windows 7 (former laptop had XP).
    Now my iPhone 4 (iOS 5.0) does not sync.
    Sync failed to start...
    Also I wonder what is the reason not to be able to sync back from the handheld? Nokia has that and it really works. When I have new contacts and restore from backup I loose my contacts, since there is no sync file on the new computer. Why the system does not work automatically and sync back from the phone, if no source files found on the computer? The back sync coud be asked every time new phone or ipod/pad is connected.
    Im starting to be absolutely fed up with this constant browsing through discussions forums and what ever hacking pages to get things running that I'm just about to throw the device into the lake next to my house. AAARGH!
    Why do we even accept this? Who would buy or use a car, that had to be repaired or re-booted every 10 miles?
    Great jobs!
    Change over was, is from Samsung NC20 (WinXP) to HP Probook 5330m (Winows 7)

    Update your XCode to 4.3.2
    Your question should be in developer forum
    Developer Forums

  • Is it possible to edit multiple images description, time, title with new OSX Photos? I find this option very useful in Iphoto

    Is it possible to edit multiple images description, time, title, with new OSX Photos? I find very useful this option in Iphoto

    why? i find this opportunity very useful, there is an alternative way?

  • Macbook Pro OS Lion couldn't access guest account and new user account

    Hi I bought this new MacBook Pro a month ago.  When I try logging into my guest account, it froze.  I had no other alternative but to get out of it by pressing the power button.  Then I tried open a new user account to see if it also has the same problem.  Unfortunately it did have the same problem - froze after I logged in.  I had done a harddisk check, there seemed to be no problem. So I wonder if this is a common problem of OS Lion? And are there any way for me to solve the problem?

    That is not a common problem with Lion.
    My suggestion is to take it to Apple and ask them to fix. Besides if you take it Apple then they are aware of your problem just in case it returns in the future.
    You might try a safe boot by holding down Shift during boot and seeing if that tells you anything.
    Allan

  • Sharing Itunes library with another User Account & Fast Switching

    Hi. I recently purchased a new iMac G5 and am in the process of setting it up to be used by 2 separate users (girlfriend and me). I apologize in advance if this is more of an Itunes issue and not solely an Administration issue.
    My question deals with creating a new user account on my Mac (with Fast Switching) and allowing my girlfriend to share my iTunes library with the ability to transfer music to her ipod when she is logged into her own unique account. I will be the Administrator on the Mac.
    We are trying to avoid loading our music two times into the Mac under each of our logins. Is there a way that we can share the music I have already loaded into my Itunes library when she is logged into her account so that she can transfer to her ipod and create her own distinct playlists? If so, any advice on how to enable this would be greatly appreciated.
    Thanks.
    Seth
    iMac G5   Mac OS X (10.4.3)  

    Unfortunately, baltwo's solution will not allow your girlfriend to create any playlists or copy songs to iPod.
    The easiest thing would be to share the entire music folder, so anyone of you can listen to your music.
    You'd have two options.
    If you want to be using the exact same library, so any playlist you created can be edited by your girlfriend and vice versa:
    1. Go to yourusername/Music/iTunes. You'll find two files called "iTunes library" and "iTunes music library" Copy them to your desktop, so you'll have a backup just in case.
    2. Move your yourusername/Music folder to computer/users/shared. (The folder will be copied ONLY in case your using FileVault, so you'd have to delete the original User/Music folder after making sure you'd got a functional copy at computer/users/shared) Select users/shared, press "apple+i" to get the info window, go to "Ownership" change all permissions to "read & write" and hit "apply to enclosed items"
    3. In case you're using FileVault, either delete or rename the original Music folder within your own account. Again, not necessary as long as FileVault isn't enabled.
    4. Select computer/users/shared/music, hold down "ctrl" while clicking on it and choose "create alias" from the contextual menu. Copy that alias into your homefolder as well as your girlfriend's account (need to log in) and rename it to "music" without the "alias" at the end.
    5. Launch iTunes. Done.
    6. Don't worry, in case you don't see your music. I've used a slightly different approach, yet this one should work totally fine.
    If you want to listen to the same music, yet be able to set up your own playlists, ratings etc.:
    For your account:
    - go to yourusername/Music/iTunes, move "iTunes Music" to computer/users/shared and change ownership according to #2.
    - If FileVault is enabled, check #3. Of course, you want to rename the original "iTunes Music" in this case.
    - create an alias for computer/users/shared/iTunes Music and copy the alias to yourusername/Music/iTunes. Rename it to "iTunes Music" without "alias".
    - Launch iTunes. Should be working the way it used to. Quit.
    For your girlfriend's account:
    - log in, copy alias to username/Music/iTunes, rename alias.
    - Launch iTunes, go to File-> Add to Library, select username/Music/iTunes/iTunes Music, choose.
    That's it.
    The only downside is, only one user at a time can access the music folder, so if you're logged in and running iTunes, you're girlfriend, logged in via fast user switching, won't be able to open iTunes until you quit it for yourself. Haven't found a way around this yet.
    Fell free to report any issues.
    huhh...rather long posting...

  • How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

    This is complex.  Until today we had one iMac with two user accounts - one for me and the other for my wife.  We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us.  Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd.  (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
    We've finally bought my wife an iPhone and set up an iCloud account for her.  And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff.  But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine.  But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
    Originally I tried a workaround by simply having her iPhone log into my iCloud account.  That works great for the calendars and the contacts.  But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account.  And neither of us want to sync our other things to each other's iMac accounts or iPhones.  Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's.  So we definitely don't want this as the set-up and communications network between our devices.
    We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone).  Does this description make sense to you?  I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work.  If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
    If anyone can help me set this up I'd be most appreciative!  Thanks so much.  Merry Christmas and Happy New Year to all readers in this community!

    BobT.
    I had the same problem, and decided to look into it last night.
    First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing. 
    Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
    1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
       Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
    2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
    From this point on, the 3 devices should sync contacts with each other.
    This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

  • Sharing one library with two user accounts.

    I want to share one iTunes library with two user accounts on the same iMac.
    I've followed the tutorial where you move the iTunes Music folder to a shared location HD/Shared/iTunes and then pointed both iTunes to that location via the advanced menu, but only the admin account has the music. The other user account iTunes shows nothing.
    Also, I've now moved the music folder back to my area on the HD (not shared any more) and now the iTunes music folder shows all the album folders where before I guess they were hidden. Why and how do I get it back to how it was...?
    All we're trying to do is share one mac. My wife and I have our own log in user accounts, but want to have the same music and iPhotos accessible on our own set-ups.
    Thanks for any help.

    Out of interest I got this to work.
    I made a folder called 'All Music' and put all the album folders in it.
    Moved this folder to User/Shared/ and then clicked on the file, and Get Info.
    In Get Info added my wife to Sharing & Permissions as Read & Write.
    In iTunes / Advanced found the folder on my user account, and then did the same on my wife's account and hit add to library.
    I hope this was the right way to do it..... It seems to have worked.

  • New Mac User: iTunes Auth with multiple user accounts

    With a Mac with multiple user accounts, does EACH user account need to have iTunes authorized, or is iTunes authorized for an entire mac machine?

    So then I assume that iTunes will know then if each of the computer's user accounts has a different iTunes account?
    When you authorize an iTunes account on your computer, the authorization info is stored in \Users\Shared\. When you run iTunes, it looks there to see if it can play purchases. The purchase account info is embedded into each purchased file.

  • Sharing itunes with different user accounts

    I just got Windows Vista. I have the latest version of Itunes. I'm trying to set it up so that my wife and I can share songs with different user accounts in Windows. I followed all the instructions. I moved the iTunes music folder to a public folder. But everytime I log off my account and return, itunes can't find the song files. Any suggestions?

    They can be transferred to another iTunes library but not another iTunes account.
    Just copy them.

  • 1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

    The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
    When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
    If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

    You can home-share multiple libraries but only use one account at a time.

  • Home Share on One Computer with Two User Accounts

    We have one computer in our house with two user accounts. I have an iTunes account and my husband has his own. Due to many moved music files and whatnot, it is very annoying and difficult to try to find songs from his library to add to mine using the Add File (or Folder) to Library link in the iTunes file menu. I am unable to access some of the songs currently in my library because he moved some of his files and my iTunes can't locate them any longer. I was hoping Home Share would solve our problem, but can't get it to work. Is it hopeless for me because we technically only have one computer? Is there an easier way for me to add some of his songs to my library without searching through our five or six different iTunes library folders on multiple hard drives?
    We have both enabled Home Share on our individual user accounts, but do not have the Home Share icon appearing in our iTunes side bar.
    Thanks for the help!

    I was able to get the two iTunes home shares to work on the same machine and "see" each others library as long as I have them both open at the same time (for the Mac, using fast user switching made that very easy). Once the home sharing was working, playing music/movies/etc worked but when I tried to import / drag and drop from one account to the other it acts like it's doing it but then doesn't.
    This may be perhaps unique to me because of my unusual setup, I set my "secondary" account to use the iTunes folder of the other, "primary", account to avoid having two copies of the same thing. Doing it this way meant I didn't have two copies of files on my computer, but it did mean I had to "Import to Library..." the media into the "secondary" account every I added something to the primary. I wonder if giving each account it's own library location would resolve this issue (while unfortunately meaning that the two accounts would each have a copy of all of the music/movies/etc, doubling my drive space usage). I'll update this post if I find out anything more.

Maybe you are looking for

  • Form 6i and 10g DB

    i want to use Oracle text (context index) for searching and oracle text is the best way .. but not im using form 6i and DB 10g R 2. my question is is thier any problem i will face it later while doing my system using context index ?? for example i wi

  • Accessing a file in a standby ASA5510

    Hi all, i have a file, a .txt of a backup configuration i need to access inside the standby ASA... Is there anyway that i can accesse the file, besides doing the failover on the active so that the passive becomes active? Thank you

  • Using External HD to backup and run mac OSX

    Howdy all, I'm going to install Snow Leopard "currently running Leopard 10.5.8" and I was hoping to put it on my 1.5 TB external HD, that way I don't need to burn it to a CD since that seems like a bit more work since I already have a external HD lyi

  • How to create an absence on a non-working day?

    Hi HR experts, Is it possible to create an absence on a non working day or holiday? I tried to do so and I get all these information messages, until it finally saves. But it wont accept any number of Absence hours. Is there a way to allow it to accep

  • Default Dashboard Filter Prompt

    Hey everyone! I have a dashboard prompt that has two date range selections (created date and book date). I need these to be the same date range - if a user puts a date range in the created date prompt, I'd like it to be the same in the Book Date prom