OS Photo stream doesn't match iOS Photo stream
Have 999 photos on my iOS devices and 62 in the Mac.....can i get them all on my mac too?
Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Similar Messages
-
I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)
Your email password.
iPhoto '11: Email your photos
Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
Make a selection from the: Default email reader pop up menu. -
Image in Lightroom doesn't match exported image viewed in Photoshop
After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?
Thanks Jao and Michael...the color management idea makes a lot of sense.
Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down. -
Audio doesn't match video because repeated half way through
Hi guys,
I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
Video: ABCDEF
Audio: ABCABC
I have tried opening it in a different project and somehow it happens exactly at the same point.
I am totally clueless of what it comes from and getting really frustrated!
Any idea?
Cheers
BabsHello, I'm new to using forums like this. Is it appropriate for me to post that I'm having the same issue? Also sounds similar to Audio doesn't match video because repeated half way through as well.
My situation is:
Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
Multiple Nikon D7000 video clips I've taken play back fine except for the following clip. In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video. I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to. I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV. I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
Any help would be greatly appreciated. I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again. This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
Thanks for any help you can provide. I don't really know where else to go to figure this out.
Joel
My Premier Elements Project settings are:
Editing Mode: DSLR
Timebase: 23.976frames/sec
Video:
Framesize: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
Audio:
Sampe Rate: 48000 Hz
Output from MediaInfo
General
Complete name : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 1.46 GiB
Duration : 10mn 32s
Overall bit rate : 19.8 Mbps
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-15 03:24:05
NCDT : NCTG
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 10mn 32s
Bit rate : 18.3 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.368
Stream size : 1.35 GiB (92%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46
Transfer characteristics : BT.470 System M
Matrix coefficients : BT.601
Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 10mn 32s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 116 MiB (8%)
Language : English
Encoded date : UTC 2014-07-02 18:22:46
Tagged date : UTC 2014-07-02 18:22:46 -
Have a disabled iPad2 that's been wiped. Using current IOS system. Trying to backup from icloud. Enter username and password - OK. Select backup date - OK. I'm then presented with an old username that of course doesn't match my password. Now what?
Hi Bluehouse44,
If you are having difficulty restoring your iPad from an iCloud backup you may want to use the steps in this article to try to get back on track -
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Best,
Brett L -
Closing Stock Valuation doesn't matched physicallly
Hi SAP Gurus.,
Can you please assist me reg this issue"Closing Stock Valuation doesn't matched physicallly".
May I know the possible rectification ways to solve this problem.
Thanks in Advance,
Regards,
Balaji BhonslePhysical Inventory...
http://www.sap-img.com/materials/physical-inventory-process.htm -
I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
plz help is it normal to have serial no unmatched on phone and box or the phone is not genuineYou are correct. The SIM Tray of iPhone 5 does not have the Serial # printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.
-
Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.
Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.
-
Error: The decapsulated inner packet doesn't match the negotiated policy in the SA
I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul -
Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Open System Profiler and report what you find displayed for the Model Identifier. -
Video copied to DVD doesn't match project I can see
Okay,
Probably another basic question but I can't find an answer in the Adobe manual. I just discovered (after burning 8 copies of the same file) that the movie on the DVD doesn't match what I see in the Project screen. The dropdown of the Organize>Project looks like what I want to see except that it seems to have the original avi file that I subsequently edited as well as the edited file. The sceneline looks correct. The timeline looks correct. I have tried eliminating the "markers" but there weren't any to eliminate - the menu drop down only gave me the option to add markers. One hint is that the DVD is picking up a menu template that I was playing with but couldn't get to work and then deleted. I ended up using the very basic title screen with black video from the top line Title dropdown menu instead of the Template option in Edit. I can see the new title in scene and timelines. Again, per previous question just posted, I see nothing in the clip screen
(i.e. th boxes) under "organize". Also, the video clip on the DVD appears truncated by approx. half the play time.
At one point I could get only the old menu template clip to show up just below the montor screen but couldn't figure out how to delete.
thxCamcorder is a Sony Handcam D8 Digital Video, not minidvd. Tape was transferred using Adobe Premiere elements 9 with brand new firewire.
First screen capture below shows only one of two black screen titles upon opening program. Nothing in media boxes. Second Capture shows frame of video clip as a result of double clicking on the third sceneline box. Third screen capture shows what the DVD opens with when played after burning. I have tried to create this from scratch but can't get rid of the fancy menu screen in the third screen capture below. Replaying the movie using the sceneline or timeline prior to burning the DVD doesn't show the "fancy picture frame" with the "play movie" option shown in the dvd playing in the third capture below. Does this help? It seems to be something like an invisible preset that I can't get rid of.
C -
I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas?
Answered in your Other post on this Topic...
https://discussions.apple.com/message/24053626#24053626 -
I am trying to update my bank information in iTunes and I keep getting an error message stating it doesn't match my bank information. I also have 9 pending charges from iTunes. Please help
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Error with calendar database: Program version 4.2 doesn't match enviroment
hi!
im instaling jes in a windows 2000 machine and i get this error when trying to start calendar:
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Information: Log created (1156170958)
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: Sun Java System Calendar Server 6 2005Q4 (built Dec 27 2005) csadmind starting up
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind successfully opened the Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module has refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind argc=1 argv[0]=C:\Sun\CalendarServer\bin\csadmind.exe
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Calendar Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: Error with calendar database: Program version 4.2 doesn't match environment version
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: caldb_InitializeEnvironment: dbenv->open returned 22
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Critical: Fatal error 70: Cannot open calendar database
anyone have faced same problem?
thanks in advanceHi Vyacheslav,
its wierd that when I run db_stat on windows, for my environment, it works.... I installed Berkeley DB XML 2.4.16 from a self extracting package.
When I tried running from my Linux box, the error message appear... The native library on my Linux box was built from the zip package dbxml-2.4.16.zip
Arent they the same?
Thanks! -
I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?
The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.
Maybe you are looking for
-
Function module to subtract a number of months from a date
I have a field, FISCPER, in the format YYYY/MMM(2007004) and I need to subtract 12 months off of it to get 2006004. I tried to just subtreact 12 but it gave me the actual value when you subtract the 2.
-
Hi, I'm trying to use the embedded browser in Linux, but it fails with the following error: Can't execute the native embedded browser. Error message: when I use it on a Windows machine, it works fine. i get this org.jdesktop.jdic.init.JdicInitExcepti
-
Need help finding 10.2 desk top flash player
only one that i can find currently is trying to install to my web browser but i need the one that can launch swf files from my desk top
-
PO condition without access sequence maintain
Dear All, Recently found one of the company PO condition Y02X in OMJJ that the Access sequence is blank. and in the pricing procedure which i can see there is a calculation type/method assign to it. Can anyone please advice me what is the purpose of
-
PRINTING with RIP such as ImagePrint 6.1 (the full postscript version)
i took the chance and bought Aperture. i don't want to go into any of the complaints here. i just would like to find out how to make ImagePrint work with Aperture. it looks like Aperture does it's own color management. i think. if i were to print via