OS update with no USB port
I have an original iPad. Is it possible to update OS to version 5.1? I currently have version 4.4.5. What is the procedure?
Yes it is possible to update to iOS 5.1.1.
Connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update.
Here are the instructions from Apple's site. Read the section about updating using iTunes.
http://support.apple.com/kb/HT4623
Similar Messages
-
I tried to update my sons ipod. It has the itunes logo with a usb port on the screen. If I restore it I will loose all his games and music. Is there any way around this?? Please Help??
Yes, that is your only option.Yes. You have to restore.
Try the following if you have difficulty restoring.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
NB200 running Windows XP - What's wrong with my USB ports?
I bought a new NB200 recently and have had a problem with my USB ports ever since.
Independently, both rhs ports operate fine with my Logitech wireless mouse - unless I attach it via a USB hub. When I use the second port to attach another device - in this case an external DVD-RW - the mouse simply freezes. Meantime, the DVD-RW itself is recognised by Device Manager, etc - ("Working fine - with plenty of available power output per port), but it nonetheless fails to work and Windows Explorer is unable to read any disc inserted in it.
Furthermore, the lhs USB port is pure decoration only; nothing I attach to it (even the mouse) will work, neither will the Sleep & Charge capability (at any of the 4 Modes).
I've uninstalled the USB controllers and ports using Device Manager which, after re-booting, continues to report that all's well, both with the devices I attach and the ports themselves, albeit i's still patently not!
I'm concerned that I'm still unable to create a recovery disc should the worst happen so can anyone help me resolve my conundrum, please?
Am I doing something wrong or, less likely to be the case, I'm sure, is there perhaps a fault with my machine??
Any advice would be helpful, please.
Regards
BobThanks for the suggestion, Guys, but neither provided the solution. I'd already updated both BIOS and Chipset drivers to the latest available.
Incidentally, the OS is the version of XP that came already loaded - subsequently updated via Windows Update, of course.
Any further thoughts anyone??
Bob -
Hi there,
I writing this because I'm having some really big problems with my USB ports.
A few days ago I plugged in an USB-Hub that was quite cheap. Suddenly a window popped up saying that a USB device was deactivated because it "needed" to much power. Since this happening, two of those windows keep popping up everytime I boot the MacBook. I called Apple and got some help: I had to delete some .plist files and clear some caches. The man who helped was able to find the error and deactivate the notification, he also told me to make a PRAM- and a SMC-reset. The man said that it's just a software problem and that I have to reinstall the system if we don't find a solution. So, one day later I reinstalled the system (Lion) and not only didn't it help, the two notification windows were popping up again...everytime I booted the Mac. So I decided to formate the whole hard drive and install Snow Leopard -> still the problem with the USB ports. After that I installed Lion -> still the problem with the USB ports. I even tried to extract the .kext files that are important for the USB functionality from an earlier Combo Update, but it didn't help either. The point is, that the Mac doesn't recognize my external hard drive or any of my iDevices. Sometimes it recognizes USB sticks, but only after 20 seconds. The data transfer on both USB ports is also very slow. If I'm lucky and Mac recognizes one of my USB sticks, it takes like an hour for 1GB to be transfered on the USB stick or from the USB sticks to the Mac.
I really don't know what to do and need help, especially because my backup data is on my external hard drive which I can't access because of this problem.
I really hope that someone can help me, I'm very thankful for every answer that could help me!
PS: Sorry for my bad English, I hope that everyone understands what I mean, please tell me if you don't get what I'm trying to explain in the text above.
Sincerely,
iLoud
[UPDATE] I downloaded "USB Prober" and copied the Output file, maybe it helps:
Timestamp Lvl Message
0.698 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7316), outstandingIO(0), _interruptReadPending(false) - rearming read
0.698 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.735 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.735 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.735 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.739 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.739 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.761 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7320), outstandingIO(0), _interruptReadPending(false) - rearming read
0.761 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.798 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.798 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.798 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.801 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.801 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.823 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7324), outstandingIO(0), _interruptReadPending(false) - rearming read
0.823 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.860 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.860 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.860 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.863 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.863 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.885 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7328), outstandingIO(0), _interruptReadPending(false) - rearming read
0.885 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.922 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.922 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.922 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.926 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.926 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
0.947 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7332), outstandingIO(0), _interruptReadPending(false) - rearming read
0.947 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
0.984 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
0.984 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
0.984 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
0.987 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
0.987 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
1.009 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7336), outstandingIO(0), _interruptReadPending(false) - rearming read
1.009 [3] AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
1.045 [3] AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
1.045 [3] AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
1.045 [3] AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
1.049 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
1.049 [2] AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
1.071 [3] AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7340), outstandingIO(0), _interruptReadPending(false) - rearming readOh, sorry, I meant "I'm writing this...".
-
My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?
It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
You can try an SMC Reset.
So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface). -
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.
Using USB 3 devices on Mac computers FAQ
-
Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
What do I need to display whatever I call up on my MacBook running OSX 7.5 on a TV with a USB port?
What do I need to display whatever I call up on my MacBook running OSX 7.5 on a TV with a USB port?
There is a VGA adapter to TV S-Video RCA Out Cable for PC Video.http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
-
Can a USB Keyboard/Barcode reader be used with the USB port on the CRio
Is it possible to use a USB Keyboard or Barcode reader with the USB port on the CRio, I know you can use this port with a USB memory device, but what about other devices?
I have a project that requires that all hardware elements be connected to the controller and use the HMI purely for display,
anybody any ideas??Hi kmoyna,
The standard CompactRIO range's USB host ports are not suitable for standard USB devices like keyboards or barcode readers - they are intended only for use of mass storage devices. From your description, it seems your project's requirements would be best met by the newer models, cRIO-9081 or cRIO-9082. These two units have Windows Embedded Standard 7 (WES7) and allow the direct connection of a monitor and standard USB devices. We now also have similar stand-alone CompactDAQ models running WES7 - cDAQ 9139.
I would recommend calling into your local branch to discuss your project further with one of our engineers. If you're in the UK, it's 01635 523 545 - or view contact details for other branches.
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786 -
Retina 13" macbook pro issue with defective USB ports?
I have a late 2013 13" macbook pro with retina display. I'm having persistent issues with both USB ports. Connected peripherals like keyboards or external USB drives either will not be recognized at all, or will take a very long time (minutes) to be recognized by the system.
I'm running the latest version of Mavericks OS X 10.9 (13A2093) at the moment, which includes the keyboard/trackpad firmware fix that addressed initial issues with this series of laptops.
I took it to the local Genius Bar a few days ago and the Apple Genius was able to get an external USB drive to mount (eventually) on each port, but now it seems that waiting several minutes for the external device/drive to be recognized does no good.
Is anyone else experiencing similar issues?Here is an example of devices you should see in the Device Manager. Can you check what you have?
-
I just purchased a Samsung DVD player with a USB port; Samsung says you can use a PC or player to play music using the USB port; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod? Or is there some ap?
Skip the DVD player use an HDMI connection to your system.
Use this http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a&fs =s%3Dalpha
or for just Audio use the 3.5 MM jack. -
Does anyone know how to comunicate with a USB port using labview 6?
Does anyone know how to comunicate with a USB port using labview 6?
Unfortunately, there is no way to communicate directly with a USB port before LabVIEW 7.0 and VISA 3.0. With the new releases, there are functions called "VISA USB Control In" and "VISA USB Control Out" that give you direct access to a USB port.
You can definitely communicate with DAQ, Serial, or GPIB devices that are connected through a USB port, though. This is done seamlessly through the NI-DAQ, NI-Serial, and NI-488.2 drivers.
Luke S. -
I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's ports with a cord that ends with a USB port?
Thank you For your time and thoughts!
I went by the Apple Store and they told me that there was a "Flat Rate" repair service for this particular part where they would replace the logic board along with the USB ports for $350. Seems like best avenue. All of this would have been moot but my wifi in the computer also doesn't work so I was using my phone as a hot spot and tethering it to the computer for Internet access when the last port quit. This left me with no internet and no printing capabilities on the computer I use for my business. Basically became a nice paperweight. lol
They will ship it off Monday and I should have it back Thursday!
Again, thank you! -
Why with last update of mevericks usb ports and xcode not works ?
yesterday i install the last update of maverick and now i cant use the time machine, usb key and xcode
do you have a solution for that ?Just waking this thread up again in case anyone has had any other ideas.
Since last posting, usb became functional again, (came back on a couple of hours after a restart) and as long as I kept the machine alive, usb would stay alive. Bluetooth came back on briefly, but for most of the time was unavailable. System profiler shows no problems and Console does not report any usb related errors as far as I can see.
After a recent restart, usb disappeared again, and despite numerous restarts and being left on for a couple of days (and subsequently left off for several days) it has not come back. When usb is not working, examining the system profiler (through screen sharing from my macbook) usb shows no errors, but also shows no connected devices. I can charge my ipod nano with any of the usb ports (front or back), so power does not seem to be the issue.
I can't reset pRAM (because the keyboard is not available at boot), but have reset SMC numerous times. Have tried other keyboards, and mice. No joy.
I seem to have run out of ideas. Any suggestions?
Maybe you are looking for
-
BAPI or FM for changing Purchase Order
Hi, Does anybody know a BAPI or FM to change Purchase Order item details. I looked for a BAPI but only found for creating and listing. thanks.
-
How to loop through single XML File and send multiple RFC calls?
I am looking for the best approach to use for making multiple RFC calls (can be sequential) using a single XML file of data. I have been attempting to get a BPM loop working, but to no avail. My RFC only accepts a single set of delivery input and I
-
I have purchased a G710 Laptop in France and was told I could change the OS to English, I have downloaded Windows 8.1 in English but how do I change the OS from French please
-
Custom Workflow Approval Table
What are some of critical fields that I would need if I were designing my workflow approvals to be based on a custom table? I have a fairly limited understanding of the major data components that are being used for workflow so any input from the exp
-
How do I sun all my messaging from phone, iPad mini, and macbook pro?
How do I sun all my messaging from phone, iPad mini and MacBook Pro? I want to be able to see all my messages from any device? Thank you for the help in advance.