OS won't start after PRAM reset

I was having problems with my battery, so I tried to reset the PRAM to see if that would help, but now I have a whole new issue...When I try to start up my computer, I get a circle with a slash through it (a symbol that usually means 'no'). This shows up right after the apple logo when I try to start up my laptop.
I used disk utility on my installation cd to check if there was a problem with my hard drive, but it said it was ok.
What did I do? Do I have to reinstall my OS, will that even help?
Thanks for you help.

Hi bluesunset,
First of all, Welcome to the  Discussion Forums!
See if this  doc might apply:
Computer won't startup after resetting PRAM
post back with comments or questions,
littleshoulders

Similar Messages

  • TS3694 MY PHONE WON'T START AFTER A RESET

    My phone won't work after i reset all contents

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode.

  • Mac Mini won't boot after PRAM reset

    My mac mini has been running very slow, VERY VERY SLOW, then it would seem it would catch up with itself and run fine for a few minutes, then slow down again. It got to the point where I would have to do hard resets, but it still wouldn't work all that great. So I read on here to do a PRAM reset, which I did by holding down controloption+PR, and i got a gray screen with a status bar. But now the mac won't even boot up, even when I try safe mode. I turn it on, and i hear the start up tone, and get to the gray screen with status bar, but then it just shuts off. Does anyone have any suggestions?
    Message was edited by: akiemele

    From your user guide:
    1 Disconnect all external devices from your Mac mini, except the keyboard and mouse.
    If you have an Ethernet cable connected, disconnect it.
    2 Restart your Mac mini while holding down the D key.
    3 When the Apple Hardware Test chooser screen appears, select the language you want
    to use.
    4 Press the Return key or click the right arrow button.
    5 When the Apple Hardware Test main screen appears (after about 45 seconds), follow
    the onscreen instructions.
    6 If Apple Hardware Test detects a problem, it displays an error code. Make a note of the
    error code before pursuing support options. If Apple Hardware Test doesn’t detect a
    hardware failure, the problem may be software-related.
    If this procedure doesn’t work, you can insert the Applications Install DVD that came
    with your Mac mini to use Apple Hardware Test. For more information, see the Apple
    Hardware Test Read Me file on the Applications Install DVD.
    When prompted, choose the extended test.

  • My MacBook Pro won't start after smc reset

    Some of my key board backlights weren't working so I tried a smc reset and now it won't start and the charger doesnt light up
    2013 late edition

    Hi there Halfblod,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    -Griff W.

  • My iphone won't start after I reset all settings

    My iphone won't turn on after 4 hours after I reset all settings. What do I do?

    Hi, try to put your iPhone into recovery mode and do the restore again. Here are the steps:
    After then, connect your iPhone to your computer and launch iTunes. Click Recovery iPhone and then follow the prompts it tells you to do.

  • G5 WON'T START AFTER SMU RESET

    Hi!
    my G5 won't start... tried a lot of stuff to make it run - i.e. swop feed cable (a big trouble to get one like it); rest SMU; connect it to another mac via firewire -, but nothing. only the start_up light is on.
    any ideas?
    thanks,
    strawb

    Unless your G5 is one of the dual cores you have a PMU not an SMU. To reset follow the directions here:
    http://www.felipecruz.com/reset-pmu-and-non-volatile-ram-g5.php

  • IPod won't start after hard reset - help appreciated

    I had a problem with syncing my iPod with iTunes. I connected and it strated syncing alright. After a couple of seconds everything froze. Smart as I am I thought there might be some errors on any of my disks the syncing process is reading from. Couldn't find anyhting though. My secodn guess would that I just bought a new external hard drive to which I transferred my library (maybe the iPod didn't knwo where to look).
    So my best guess was to perform a hard reset and re-sync everything. So I hooked up the iPod and quickly pressed the stop syncing button before nayhting could freeze. That worked well. You probably can guess what happened when performed the hard reset.....everything froze. And now.....my iPod is trying to restart, but at a certain point I hear the drive disconnect and starting up again. This keeps repeating over and over again. Hooking it up to my macbook has no avail. Any suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    It is very ikely that there is no way to recover any data from the iPod

  • Laptop won't start after I reset hard drives

    I  have a Compaq Presario CQ56 notebook hat was running windows 7 premium. I've purchased windows 8 pro product key online, and installed it. My  were no longer activated on my laptop. I tried getting the solution online and it said, reset your pc and I did. Unfortunately, it reset all the laptop drives now I have NO DATA AT ALL!!!! he computer comes on and it tell me to hit control, alt, delete to restart and nothing happens. Please how do I get data back on my laptop?

    mrsbailey3 wrote:
    I  have a Compaq Presario CQ56 notebook hat was running windows 7 premium. I've purchased windows 8 pro product key online, and installed it. My  were no longer activated on my laptop. I tried getting the solution online and it said, reset your pc and I did. Unfortunately, it reset all the laptop drives now I have NO DATA AT ALL!!!! he computer comes on and it tell me to hit control, alt, delete to restart and nothing happens. Please how do I get data back on my laptop?
    " I tried getting the solution online and it said, reset your pc and I did."
    Just what solution was that and where was it? Stating that a solution was online is a truly broad statement as it encompasses the entire internet that is accessible to you.
    If you made the mistake of using  the Windows 8 refresh utility, then your data is gone. 
    Provide some specific information so we can try to help you.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • E5 won't start after multitasking freeze

    hi,
    my E5 is shut itself afer using Opera Web + music + Palringo
    i can't turn it on after, i need to wait for about 4 hours or more before starting it = it as soft reseted alone but how can i accelerate the process if i can't even turn it back on !
    ps : nokia review advice for nokia E5 don't buy it ... go to Blackberry if you can !

    December 21, 2010
    To whom it may concern:
    /t5/Eseries-and-Communicators/E5-won-t-start-after​-multitasking-freeze/m-p/840827 
    The thread looks familiar to me. I just came from Nokia Care Center a while ago and left my Nokia E5-00 phone there with the same problem as everyone else on the thread.
    I am from the Philippines and my Nokia E5-00 was made in Korea, sent to Hong Kong, and then sold here in the Philippines. That is a lot of cost saving activities to do.
    I previously had my first Nokia E5-00 a week ago, Monday. It felt like I am the happiest man in the Philippines. You know, the "I have a Smartphone!" proud feeling of a young man.
    But all excitements turned into saddening experience. My contacts are not accessible from theMenu and the Shortcut (default: right selection key) making it inconvenient to create a message or call a contact.
    That was a different issue. So I made my phone replaced and last Sunday, 2 days ago, I had my new Nokia E5-00 unit.
    Yey!
    The contacts were good as all other applications were.
    Then, I started having problems as everyone else in the thread experienced. The phone had a bad restart habit and it was, in fact, irritating. It was tolerable at first. Not bad for a replacement phone. I was not much bothered with the restarts.
    Then, I was able to start utilizing GPS, like I would get lost. It was an amazing experience for someone here in the Philippines. I was proud to have a good working GPS in my phone!
    But, unluckily, 30 minutes after the fun. I set my phone to go back to work and WALAH! My phone shuts down after transferring some files. Good thing my Nokia E5-00 finished all transfers before dying out.
    It was not quite the Nokia Smartphone I expected. And, that was really disappointing. Thank you im_mobile for the term.
    I did not expect to see these much people complaining problem with Nokia E5-00. Same as everyone else experienced.
    How should Nokia fix this? I am not in the position to say this, but Nokia should (1) recall these defective Nokia E5-00 products (Thanks magnum_jon) and (2) replace all defective units from unsatisfied customers.
    I think Nokia will not get hurt from returned phones. In fact, they will have the benefit of immediately finding out what the problem is and they will be able to fix this immediately if they get all of our defective Nokia E5-00 units. They can (1) isolate the problem, (2) test as many phones as they want, (3) find out the problem and (4) make a happy customer.
    These much claims is not tolerable. This is degrading Nokia. I believe Nokia has seen much already, and I am hoping that by the time they read my post, it would be the last.
    And the next reply to this thread would be a happy customer with a newly replaced, non-defective, Nokia device.
    Thanks,
    Eljun Pacomios.
    Philippines

  • Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

    Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

    This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
    http://support.mozilla.com/en-US/questions/880170

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • C3-01 won't start after charging

    I'm so angry right now but I will try and be cool about this!
    I bought C3-01 mobile phone about four months ago and it is already causing me problems.
    The mobile phone simply won’t start after charging. Last time i charged it, it miraculously came to life only, and only after annoying me for about hour and a half. Now I fear it is completely dead!
    Battery was not completely empty so the phone should still start even if the wall socket is broken. Which is not, wall socket works perfectly.
    Nothing helps! I tried removing the battery and then restart. Removing the battery then removing the sim card, memory card and that piece of “advanced technology” simply won’t start!
    I didn’t buy my new phone so that I can use my old Motorola mobile, which btw., still works after 4 years of intense usage.
    I will never buy Nokia again!

    Hi,
    Sorry to hear that your phone is not starting after charging.
    I would suggest one more thing, which maybe helps. If you have another battery, please try.
    If not,  i would recommend to visit Nokia Care Point in your area.
    To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
    Br
    Mahayv

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon

    HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon, when I see the process in task manager Firefox is there but after a second it will end processing automatically, I have tried ff7 and ff6 and have the same problem, even re installing the Firefox doesn't fix the problem, any one know the reason? I'm using a win7 64bit, and bitdefender internet security

    Hi All,
    This is not a virus . I used this website & I found it very useful & you can remove it through the following steps.ar.hao123.com 1- Then right-clicking on the icon Mozilla Firefox on the desktop, then choose "Properties", as shown in the picture: 2- Select Tab "shortcut", and then delete the text after. Exe in "target" as shown in the following picture, then press "Ok" 3- Open Firefox, and then choose "options" from the list of "tools" 4- Select the tab "general", and in the list "when Firefox starts" then select "show my homepage" and in the box "homepage" then enter any other link and then press "OK"
    you can visit [http://ar.hao123.com/report/ar-feedback.html Hao123] hao123
    ar.hao123.com

  • Firefox won't start after update - nothing in support pages helps

    windows 7 - firefox won't start after update - no support pages are relevant

    -> [[Firefox will not start]]
    Check and tell if its working.

Maybe you are looking for

  • IF Then Else question in PL/SQL script

    Hi guys, this will be an easy one for most of you. I'm just looking for advice on the most efficient way of doing this. I have 15 fields where I need to check that the value doesn't equal a group of values. For example, NG,NA, NOT KNOWN etc. If the f

  • Itunes won't sync music to iphone 5

    I've just upgraded to the iphone 5 32gb from 16gb and having a few issues with syncing music.  My  iphone 5 (16gb), I passed on to my mother as I wanted a 32gb, but I'm using the same apple id for both phones. I used restore from icloud to set up the

  • How to save data on a graph and then add new data to it

    i am currently plotting data on a graph from a physical system. However when i want to add new data to the plot, the old one is replaced. I am trying to do more than one plot on the same graph, where the incoming data is at different times. I want so

  • Unicode character doesn't display integral symbol

    I tried using unicode character 222B in my program to get the integral symbol. It works well in jdk1.2, but if i try to run the same program in jdk1.3 , it's returning delta symbol. What is the possible solution, such that i get the integral symbol i

  • HP ProBook 4530s Recovery Issue.

    Hello Dear, Sir/Madam,                                           Recently I bought HP ProBook 4530s Laptop and I found there is a HP_RECOVERY Partition Disk and HP_TOOLS Partition Disk. with the Specifications detail's. Windows Edition: Windows 7 Hom