OS X 10.10.2 installed, but re-appears.

I've restarted and successfully updated my computer to OS X 10.10.2, but it seems that it still appears to be downloading very slowly or constantly stuck at calculating in the App Store alongside iTunes 12.1 which also appears multiple times under 'Updates Installed in the Last 30 Days.'

Pause the download.
Try re-indexing Spotlight.
Spotlight – Re-index

Similar Messages

I have installed itunes and it says it has been installed but doesnt appear anywhere

I have removed iTunes as I had previously unintentionally removed a part of the program that gave my laptop sound! I am now trying to reinstall, I downloaded and ran the program twice now and each time it says that iTunes has been installed but I can not find it anywhere, no desktop icon and not listed on the program list in the start menu or in control panel> add or remove programs. please help!

See the further information section of Troubleshooting issues with iTunes for Windows updates for download advice.
tt2

Macbook says to select disk to install but none appear

Ok, I just got a used macbook that needs the install disk that I ordered from apple. I just put it in, the setup seemed to be fine (select language etc) but now it wants me to select the disk wher you want to install mac os x but no choices appear in the menu. The disk is in the computer obviously. Help!

Or maybe the harddisk needs a bit pf prepping:
From the Top Menu - Utilities start Disk Utility.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Stefan
(part of this post is courtesy of Kappy)

Prores codec installed but not appearing in AME

HI,
I installed the Apple Codecs as well as the Presets, but it won't appear as a choice in AME. Any suggestions what I might be doing incorrectly.
Thanks,
Ken

HI,
I installed the Apple Codecs as well as the Presets, but it won't appear as a choice in AME. Any suggestions what I might be doing incorrectly.
Thanks,
Ken

Templates installed but not appearing in pallette.

I've just sat down to burn a showreel dvd and all my templates/styles etc are missing. They're installed in the right place on the hard drive but if I try to point dvdsp to them in the prefs nothing happens.
Am I going to have to reinstall?
Tried a different user account and same deal.

I've just sat down to burn a showreel dvd and all my templates/styles etc are missing. They're installed in the right place on the hard drive but if I try to point dvdsp to them in the prefs nothing happens.
Am I going to have to reinstall?
Tried a different user account and same deal.

New SSD and need drivers to install , but...

So I am trying to restore a portege R705-p42.... Its hard drive broke and I have no recovery disk. I replaced the hdd with a SSD , and loaded up windows 7 iso from a usb , the installation went well . its needs at least , network and other driversI downloaded them to usb and install them on the toshiba , but they dont appear to work i did manage to get intel LAN driver to work , but somehow it still wont fully connnect (connected but no access) ... other drivers go through the install but dont appear to work ... Is there something i can do to get these drivers to install properly ? thanks for any help

Portege R705-P42
Downloads here.
You need to install essentially all of the drivers and utilities at the site above for the laptop to work as designed. And the order matters. I don't have the time or patience and prefer to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to create recovery media, you can obtain it from Toshiba. Scroll down to Get Recovery Media here.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 72 of the User's Guide.
Portégé R700 Series User’s Guide

While updating a programme,it shows installing but it is not doing.

While updating a programme,it shows installing but it is not doing.

Try rebooting the ipad by pressing and holding the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go.
May work for you

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

Not able to install onedrive for business, keeps telling its already installed but its not (W7)

not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstall

yeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.
I am getting very frustrated with this. When I try to install the Creative Cloud thing it asks me to pay even though it says try for free.

Hi Mirrormonolith,
Please try the following steps assuming its a MAC:
1) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
2) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
3) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user Enabling and using the "root" user in Mac OS X
Please let me know of that worked.
-Ankit

I am trying to update a number of items which the software check brings up: It runs and says it is installing but at the end I get this error message: The update could not be expanded, and may have been corrupted during downloading. The update wil

Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
Thanks

Thanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying.

Flash Player 10 installed but not woking

I have spent hours and hours trying to solve this issue on my own from all the adobe forums and forums on other websites about this issue. Still can't get FP to work and I need it working ASAP for my on-line college classes. Getting very desperate and would be incredibly grateful for a solution if anyone can help.
Note: Just before writing this I uninstalled FP active X via control panel and rebooted. The files are still in macromed as listed here, but I have uninstalled FP for a(NOTHER) fresh start.
Here's are the notes I have so far after seeing/trying help on other posts...
Flash player was working now every time I need to use FP it tells me to install but it is already installed.
Program does not show under Start, All Programs but it does show in the Control Panel uninstall list.
I don’t remember exactly when FP stopped working, but I’m not sure I’ve been doing much recently that would have required it, so may be longer than I think. Probably relatively recently though.
I have searched and searched for answers in the forums so I’ve tried several things people suggested, still not working.
Wondering if the problem is this….the ActiveX control is not showing in Manage Add-ons even though I clicked to install it when installing FP.
SYSTEM INFO:
Vista 32 bit
IE 8
Foxfire 3.6.8
Shockwave Player ver. 11.5
Norton 360 ver. 4.2.0
Google toolbar ver. 4.0 w/pop-up blocker enabled
I am the Administrator and only user on my laptop
What I’ve tried so far:
Adobe website shows FP video that it was successfully installed right after, but I just tested again and the Adobe site says to view content I JavaScript enabled and need FP installed. FP is installed however, and still not working.
Tested Shockwave Player through Adobe site and it says it’s installed and working
Checked to ensure Shockwave Flash Object & Java were enabled in IE tools, managae add-ons
Checked that no older versions of Java were installed
IE Security Level to medium
Uninstalled Adobe Flash Player, rebooted, reinstalled, rebooted (a few times)
Uninstalled, rebooted, installed through cnet’s downloads
Checked for updates for IE, Foxfire, Flash Player, Adobe Reader, & Java
Files listed under acromed folder:
            Flash10i.ocx
            FlashInstall (text doc)
            FlashUtil10i_ActiveX.dll
            FlashUtil10i_ActiveX
            Install (text doc)
Ok, think that's all I have at the moment. Please oh please, someone help me before I throw myself out the window!

Thank you so much for your time! Okay, I think I have what you need, if I understood it all correctly. Here goes...
I just installed FP again, did not get the video showing on Adobe site that it was successful even though the download said it was.
Uninstalled using Adobe uninstaller, then tried install once more with the same result.
The macromed Flash folder still has the same files as listed before:
Flash10i.ocx
FlashInstall (text doc)
FlashUtil10i_ActiveX.dll
FlashUtil10i_ActiveX
install (text doc)
In Control Panel I see:
Adobe Download Manager
Adobe Flash Player 10 ActiveX
Adobe Reader 9.3.4
Adobe Shockwave Player 11/5
Showing & enabled in IE Add-ons:
get_atlcom Class
Shockwave Flash Object
Adobe PDF Link Helper
Adobe PDF Reader
The Active X Control for Flash Player is not listed in IE
Don’t see any relevant add-ons in Firefox. BTW, I don’t usually use FF and only downloaded it again because I’d read that FP was working for some people in FF when it wasn’t in IE. So, if we don’t get FF working with FP I’m good with that.
No NPSWF files in the Flash folder for me to right click.
Can't give you any version numbers.
Did I miss anything?

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

Thanks for your help Karen Serena. Obviously, it appears in the list of printers and scaners on the left, into the "Print and Scan" with system preferencies. Then i click it , it appears on the right, then i click "open scanner" below the name and opens a window writing "open device failed". When i connect the scanner, it makes a sound but that's all...the scanner is dead, even if I push any button...Also there isn't any window opened to prove the function of the scanner, only is shown in the scanner list, that's all.

Picasa installed but doesn't open [Solved]

Picasa is installed but doesn't open. Icon is on toolbar. What else is needed ?
Last edited by vinoman2 (2009-09-01 02:10:38)

skottish wrote:
vinoman2 wrote:
Mr.Elendig wrote:try running it from a terminal, and see what it complains about?
[davek@arch64 ~]$ picasa
/usr/bin/picasa: line 107: /opt/picasa/bin/repackage32.sh: No such file or directory
[davek@arch64 ~]$
You're getting "No such file or directory" errors because you're running a precompiled 32 bit binary on a 64 bit machine without having all the required 32 bit libraries. Try and install every lib32 counter part to the dependencies listed on the AUR page.
I thought it was because of being 64 bit.
I was looking for that dependencies list... where is it?

OS X 10.10.2 installed, but re-appears.

Similar Messages

Maybe you are looking for