Os x 10.10 display settings not remembered

New Mac Pro 12-core running 10.10.2, main monitor is LG UM95 connected via thunderbolt, also a Panasonic TV connected via HDMI to the HDMI port. At every restart, the display settings revert to "mirrored" mode. How do I fix this?

Try resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Similar Messages

  • Safe mode display settings not 'sticking' after restart?

    Hi
    I used a display setting not supported by my Mac mini and consequently had a 'out of signal' error on my monitor and restarted in safe mode, logged in and altered the settings.
    When I restart the display settings do not 'stick' and I get the same error. How do I get the settings to stick? Have tried logging in as administrator and user with no joy!
    Thanks Nigel

    Hmm. Maybe that combination of changing resolution in Safe mode and resetting PRAM have a combined effect of some kind? Worth remembering for the future. Thanks for posting.

  • Folder Display Settings Not Saving

    Searched forums with no luck, anyone run into this problem?
    I have a user who likes to set up folders in his GroupWise 2012 client (on Windows XP) to show To and From columns as the first two columns in his folder view. When he changes a folder and saves the changes in the Properties/Display/Custom Settings, everything looks fine. The next day when he gets into his client and goes to the folder he changed, the changes (adding the To/From columns) are gone. The really strange thing is they are only gone "most of the time", at other times the changes stick and do not have to be redone. User has found nothing consistent about why changes are sometimes forgotten and other times remembered.
    Thanks ahead for any ideas.

    MarkMoorhead wrote:
    > I have a user who likes to set up folders in his GroupWise 2012 client
    > (on Windows XP) to show To and From columns as the first two columns
    > in his folder view. When he changes a folder and saves the changes
    > in the Properties/Display/Custom Settings, everything looks fine.
    > The next day when he gets into his client and goes to the folder he
    > changed, the changes (adding the To/From columns) are gone. The
    > really strange thing is they are only gone "most of the time", at
    > other times the changes stick and do not have to be redone. User has
    > found nothing consistent about why changes are sometimes forgotten
    > and other times remembered.
    When saving the changes, instead of taking the default name of <Folder
    Custom Settings> try changing the name to something like <Folder Custom
    Settings2>. While I haven't seen this with the 2012 client, I have
    seen it with GW8 and earlier and usually saving the display settings
    with a different name would get the changes to "stick."
    Also if this is just the 2012 client and not 2012 SP1, you could try
    upgrading to the SP1 client.
    We're your Novell--again. http://www.novell.com/promo/backtobasics.html
    BrainShare 2013 is coming! http://www.brainshare.com

  • Hide Display Settings not applied in User GPO

    Hello,
    I am trying to hide the display settings via a GPO so folks can't change the resolution. I set the "Disable the Display Control Panel" setting to enable, but users can still go to the Control Panel and change the display settings. Other parts of
    the GPO are applying, like the Ctrl+Alt+Del settings. The GPO has the loopback function set to replace. From my understanding, that should force all user settings in that GPO on everyone who logs into the computer, whether they are in that OU or not.
    Some settings apply, just not the Display settings. Is there something else I have to enable to get that working?
    Thanks
    Jason Watkins MCSE, MCSA, MCDBA, CCNA

    Hi Jason,
    It's been a while. How is it going? If it still doesn't work out, we can run command
    gpresult/h report.html to collect group policy result to check this. Note: to collect computer part group policy settings, we need to run the command with administrative privileges.
    In addition, regarding troubleshooting group policy issues, the following thread can be referred to as reference.
    [Forum FAQ] Common steps to start troubleshooting Group Policy application issues
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • 6303i - display settings not saved!

    Hello - I have updated my 6303i to the latest firmware from the nokia site.
    Everything works fine but now any chance I make to my display settings (e.g. wallpaper) are not saved, i.e. the change is being populated until the next reboot of the device. Once I rebooted the device, all my display settings changes are lost and e.g. I am back with a device with no wallpaper.
    Any idea what is going on?
    thanks

    The problem came back a while after installing 10.10.2.
    However, it does seem to have been fixed by 10.10.3.  Hooray.

  • Display settings not saving

    I have just bought a Touchsmart 14-n055sa and I'm having problems with linking my laptop to my tv using the HDMI lead. When I choose the "duplicate" option in display settings, I get a message saying that it is unable to save my settings. I have contacted Microsoft who have told me that I need to download some drivers, but I'm not sure which drivers to download. Anyone got any ideas??

    Hi claudsmum,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I will be happy to help you with the “unable to save display settings” error message. To find the correct graphics driver for you to install I will need to know your operating system.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Object-level display settings not working in CS5

    I can't change display settings at an object level in an InDesign document, if I want to change display settings it will only work at the document level. If I try to change at object-level nothing happens. This is on a high-spec Windows 7 64bit with Nvidia GeForce 470, with up-to-date software & drivers, running InDesign 7.0.2.

    Since I can't reproduce the problem here, at least so far in limited testing, I don't know where to point you or what might be affecting the frames in question. Can you copy a few of these frames onto a new page, verify that the problem still exists, then zip the page (you can delete the images, just leave the frames), and post it on a server someplace like YouSendIt.com, then post a link here?
    It might not be something that you can fix except by replacing the frames. If that's the case, it might be possible to script the replacement.
    Oh, I just thought of one other test. Have you tried cutting the image itself, using the direct select tool, and pasting into a new frame? that also will help isolate the problem as the frame.

  • X-Fi Audio Settings Not Remembered After Reboot - Solution

    I have an X-Fi Titanium Fatal1ty PCI-E on WIN7 64bit and I decided to try some different drivers, just out of curiosity. My drivers were working fine for the most part (except OpenAL BSOD) prior to this.
    After changing drivers, Windows would no longer remember my audio settings, such as volume level and all the changes I made in the Creative Console Launcher (EQ, disable CMSS-3D, THX settings). After rebooting, the settings would revert to the default setting.
    Solution:
    I went into the Creative Audio Control Panel, to the "Restore Defaults" tab and, with all boxes checked, hit the "Restore Defaults" button. Whatever was causing it to not remember settings was cleared out and it now remembers all of my audio settings after restarting Windows.

    Hy,
    have you already tried to start the soundcard ?at other PCs?
    Do you have this problem with other usb-devices at your PC, too?
    What happens after standby or hibernate?
    Does for example a li've linux or windows in secure mode detect the x-fi after startup?
    Maybe this details can be helpful to find the reason. I could imagine, the died internal sound card is inhibiting windows in detecting any other audio device...
    I've had a died touch pad (the left mouse button didn't work after ~5 minutes) and until disable it, the same problem happened with the other trackpoint mouse, too.

  • Display settings not reatained

    I'm runing my thinkpad with dual monitors when docked, and it doesn't retain the resolution I set for either monitor when the system is restarted. Is there a way I can set a mandatory display resolution for both monitors?

    Hi claudsmum,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I will be happy to help you with the “unable to save display settings” error message. To find the correct graphics driver for you to install I will need to know your operating system.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • PSE 8 colour management settings not remembered

    In PSE 8, the colour management dialogue in File->Print->More Options->Color Management does not remember a Printer Profile that has been set.
    I'm trying to help get a non-technical friend up and running with digital printing. He's bought PSE 8 and an Epson R2880, and wants to try printing with Ilford and Harman papers using the manufactuers ICC profiles. We've installed the profiles OK, but ...
    On the friend's PC (running Vista Home Basic) if I set "PSE manages colors" and set a profile, then close the dialogue, then reopen the dialogue the handling has reverted to "Printer manages colors" and the profile drop-down is greyed-out (and remains so even after re-choosing "PSE manages colors").
    I the installed the trial version of PSE 8 on my PC to try to replicate the problem. It's similar but not exactly the same ...
    On my PC (running Win7 Ultimate) the Color Handling setting is retained, but no matter what ICC profile I choose, it always reverts to my original choice after closing and reopening the dialogue.

    Finally got to the bottom of this,
    Bizarrely, it appears that PSE needs to be run under an Administrator account to work properly.

  • MacBook Display Will Not 'Remember' Brightness

    Okay, so I finally went out and bought a black one. Since the Core2 models came out, it came to me at a great price.
    I'm very happy with it after a RAM upgrade to 2GB and after I turned down the screen brightness. The machine remembered my screen brightness setting until I applied the latest firmware update. Now every time I start (or restart) it, the screen comes on at nearly full brightness.
    I find the full on brightness setting to be far too bright (and irritating) and possibly hard on the backlight. What can I do to fix this problem?

    Thanks for the suggestion. However, I think that the
    option you mentioned is only available on the Macbook
    Pro. I have a black Macbook.
    If you're referring to the following:
    change the screen resolution to something else and back and reboot.
    ...then go to System Preferences, Displays and in OS X 10.4.8 you'll surely find an option to change the screen resolution (so: NOT only in the MBP).
    Arjan.
    MacBook 2GHz 2GB   Mac OS X (10.4.8)  

  • ATI Display settings not adjustable

    Hello again,
    I purchased a new Monitor and also purchase the DVI to VGA adapter from the apple store. Now i would like to use 1 monitor and have 2 machines hooked up on a KVM switch. My true issue is i cannot adjust the 19" Veiwsonic. Below are the settings and you will see that my old one is working just fine, but the new monitor won't adjust from the 640 x 480 and i think i need somewhere in the 1900x1400 range.
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 256 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A73503-202
    Displays:
    Display:
    Resolution: 1280 x 1024
    Depth: 32-Bit Color
    Core Image: Software
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Not Supported
    Display:
    Resolution: 640 x 480
    Depth: 32-Bit Color
    Core Image: Software
    Mirror: Off
    Online: Yes
    Quartz Extreme: Not Supported

    I'm starting to think my the card is some how been damaged
    I am inclined to agree.
    You will need to look on eBay for a Mac compatible graphics card.
    Retail sites that have Mac compatible cards are few, and they are scary expensive.
    Besides, no one makes new cards any more. All OEM cards are used.
    Here's how G5 options stack up:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
    On eBay, the same Apple OEM 9600 runs about $150.
    Mac compatible Radeon 9800 Pro cards run from $100.
    An OEM Geforce 6800 GT or Ultra is over $200.

  • Gnome font settings not remembered

    I'm trying to change the font dpi from the right click menu on desktop, but after i log out and log back in the dpi setting is falling back to 92dpi( I'm trying to set it to 96), but other settings like hinting, subpixel rendering is not affected. I cant figure this out, are there any conf files that I can edit manually?

    What window manager - Gnome, KDE. XFCE, Openbox, etc.?
    DPI can be set in xorg.conf, and AFAIK it's the only place where it can be set as *two* values (horizontal and vertical), which is desirable for widescreen displays.
    $ xdpyinfo | grep -B1 dot
    dimensions: 1920x1080 pixels (372x231 millimeters)
    resolution: 131x119 dots per inch

  • Nvdia geforce display settings not avilabe in screen resolution

    I bought a NEW HP 15 r0022tx note book i am having windows 8.1 64 bit operating system
    i just  installed a nvdia driver. when i open the  screen resolution it showed that display is using intel hd integrated graphics.
    and i uninstalled the intel hd graphics driver and restarted my pc. but I am not able to see nvdia display graphics option neither in screen resolution settings nor in nvdia control panel.
    Please  help me(reply me)  fast....

    Hi @v95 , 
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with your HP 15-r022tx Notebook and issues with the graphics card. I would do a system restore. 
    Once that has completed I would just go to the Device manager right click on the drivers for the graphics card and update the driver.
    If this does not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Eye dropper settings not remembered in CS5

    My eyedropper tool used to work perfectly.   Everytime I'd take a sample of an element on the page, it would be applied to my selected object.  A few weeks ago, I started experimenting with the tool's eye dropper settings, turning things off and on, and now, the eye dropper setting appears to get reset each new work day I come it.  I can't get Illustrator to remember my eye dropper settings.  Strange...and annoying.
    Any help?
    Christian
    I'm using AI CS5 on the Mac 10.6.6. 

    Since I can't reproduce the problem here, at least so far in limited testing, I don't know where to point you or what might be affecting the frames in question. Can you copy a few of these frames onto a new page, verify that the problem still exists, then zip the page (you can delete the images, just leave the frames), and post it on a server someplace like YouSendIt.com, then post a link here?
    It might not be something that you can fix except by replacing the frames. If that's the case, it might be possible to script the replacement.
    Oh, I just thought of one other test. Have you tried cutting the image itself, using the direct select tool, and pasting into a new frame? that also will help isolate the problem as the frame.

Maybe you are looking for