OS X 10.4.7 Admin Tool Won't Installing

I recently bought an Intel iMac and tried downloading and installing 10.4.7 Server Admin Tools on it but evertime I go through the process it keeps coming back saying it could not be installed for 'some unknown reason'. I'm running Leopard on the iMac but need to run Admin Tools communicating with my server running Tiger. Is there a conflict here that Leopard won't run any app designed for Tiger? I wouldn't think so as how can I install Leopard Admin Tools when my server is running OS X Server 10.4.10?

Here is the exact thread if any one still has problems:
'Download the Server Admin Tools 10.4.7 and open the disk image file. Go to the folder Administration Tools/Installers/Packages and select ServerAdminTools.pkg. Control click on the .pkg and select "Show Package Contents." You will see inside Contents folder "Archive.pax.gz." Drag the file to your desktop and double click to decompress it (Mac will do it automatically). Once it's been open you will see an Archive folder and inside you will see an Applications folder where all the 10.4.7 Admin Tools are. Just drag the tools to your Applications folder and your done.'
I cam confirm that OS X 10.4.7 Amin Tools are now working perfectly on my Leopard OS.

Similar Messages

RSAT Tools won't install (the update is not applicable to your computer) in build 9926

Trying to install Remote Server Administration Tools in Windows 10 Technical Preview build 9926
Downloaded WindowsTH-KB2693643-x64.msu
Gives error "the update is not applicable to your computer"

Hi SeanSauve,
The below is the information I quoted from the system requirements part on the download page:
Supported Operating System
Windows 10 , Windows 10 Tech Preview , Windows 8.1
**Remote Server Administration Tools for Windows 10 Technical Preview can be installed ONLY on computers that are running the second release of Windows 10 Technical Preview.** Remote Server Administration Tools cannot be installed on Windows
RT, computers with an Advanced RISC Machine (ARM) architecture, or other system-on-chip devices.
Remote Server Administration Tools for Windows 10 Technical Preview runs on both x86- and x64-based editions of builds 9926 and later releases of Windows 10 Technical Preview, including all updates. This release does not run on Windows 10 Technical
Preview builds that are older than 9926. Download and install the version that matches the architecture of the computer on which you plan to install the administration tools. If you are not sure whether your computer is x86- or x64-based, see
How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Remote Server Administration Tools for Windows 10 Technical Preview is available only in United States English (en-US) for this release.
IMPORTANT: Remove all older versions of Administration Tools Pack or Remote Server Administration Tools—including older prerelease versions, and releases of the tools for different languages or locales—from the computer before you install Remote
Server Administration Tools for Windows 10 Technical Preview. Only one copy at a time of Remote Server Administration Tools can be installed on a computer. If you have upgraded to Windows 10 Technical Preview from an older release of Windows, you will need
to install Remote Server Administration Tools for Windows 10 Technical Preview on the computer; no earlier releases of Remote Server Administration Tools are still installed on a computer that you have upgraded to Windows 10 Technical Preview.
Remote Server Administration Tools for Windows 10 Technical Preview includes support for remote management of computers that are running the Server Core installation option or the Minimal Server Graphical Interface configuration of Windows Server Technical
Preview. However, Remote Server Administration Tools for Windows 10 Technical Preview cannot be installed on any releases or installation options of the Windows Server operating system.
Earlier releases of Remote Server Administration Tools (such as those for Windows 8.1) are not available--nor do they run--on Windows 10 Technical Preview.
Server Manager is included with Remote Server Administration Tools for Windows 10 Technical Preview; GUI-based tools that are part of this release of Remote Server Administration Tools can be opened by using commands on the Tools menu of the Server Manager
console. To use Server Manager to access and manage remote servers that are running Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2, you must install several updates on the older operating systems. For more information
about requirements for using Server Manager to manage remote servers, see
Manage multiple, remote servers with Server Manager.
More information, see:
Remote Server Administration Tools for Windows 10 Technical Preview (January 2015)
Please check and see if your current build is Windows 10 build 9926, and the system language, RSAT should not be able to install on the other language versions of Windows 10 other than EN-US.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

Designjet 70 maintenance tool won't install on Windows 7 64 bit machine

I recently got a new computer running Windows 7 Pro. It seems that the Designjet 70 maintenance tool will not install to allow me to do any diagnostic testing. Appears that the printheads need aligning.
Installation seems to go fine until it hangs up with this message. Printer is connected and on is printing (streaked) images.
on top of

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - Designjet & Large Format. Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Pro Tools won't install. Startup disk full-not true.

I'm trying to install Pro Tools 10.2 on a Mac Book Pro OS X 10.7.4. I'm doing a clean install, but the installation won't complete. It bogs down half way through. I finally have to force quit the installer because it says my startup disk is full. This is not true because I have 500 gig of memory left on my drive. My trash is empty. I don't know what to do.

You seem to know that an Intel Mac requires a drive formatted with a GUID partition table to boot from it, so that much of your scheme should work, even if you are formatting the drive from 10.4.4 via Target Disk Mode with a PPC Mac, as long as you are using a version of Disk Utility that offers the GUID partition table formatting option (in the Partition tab, in the "Options..." drop down sheet.)
However, it isn't clear if you are then trying to install the OS onto the Intel iMac while still in Target Disk Mode, or which installer you are using. As already explained, you can't install an Intel version of the OS from a PPC Mac while in TDM -- as far as the installer knows, the target is just a drive attached to the PPC Mac, so it will inform you that the Intel OS version can't be used with that Mac.
So, the solution is to make sure the drive is formatted with the GUID table & then install the OS onto the Intel iMac while booting it from the iMac's own installer disk. If necessary, you can access the installer's version of Disk Utility before you begin the installation by selecting it from the "Utilities" menu & checking or reformatting the drive before the install.
This should work fine, unless for some reason you cannot boot the iMac from its original installer disk. If that is the case, please let us know.

Access Connections and Tools won't install properly

I have followed advice uninstalled the wireless driver, access connections, hotkey, power manager. . Reinstalled all ( latest versions) except access connection. Wireless connections work correctly and all hot keys function appropriately ( including Fn +F5 ). Then I let TVSU download Access connections. An icon is placed in the task tray. Clicking on it nothing happens. Also none of the hot keys work including the blue ThinkVantage key. Once I uninstall Access connection I am back in business with the wireless connection and the hot keys working. ( for all these installs I turned off the Microsoft virus scanner and the firewall).
Have similar problem with ThinkVantage tools in that I get the Icon in the task tray and then the program freezes. No problem in reinstalling PC doctor5
T60 series2007 Windows XP professional pack3.

Hi dulverton,
I find lenovo drivers and software rather eccentric; since they need to be installed in a particular order to work properly.
First uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
Further this is the order in which the following drivers must be installed for each of them to function desirably:-
1) Lenovo PM driver
2) Lenovo System Interface Driver
3) Hotkey driver
4) Wireless driver software [reboot]
5) Access Connections [reboot]
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

AP-to-LWAPP-Upgrade-Tool won't install

I have downloaded 3 versions, 3.0, 3.2 and 3.4.... all of them hang after extracting the files and launching setup.exe....
I have tried on several different Win XP machines... same result
Don't know if it matters at this point, but the intended WAP is an AIR-AP1252G-A-K9...
any ideas?

You can't use the tool for that:
Here is direction from a member on this forum:
It took me a while to get this information, so thought I'd share. Here it is:
You cannot use the upgrade tool to do the IOS to LWAPP for the 1250 APs.
Here is a method to do the conversion.
*Method 1 : ( Mode Button )*
1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.3) to the tftp server (your laptop or pc).
3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com or
http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4(10b)JA3&fileId=271159&treeMdfId=278875243&treeName=Wireless
4. Rename c1250-rcvk9w8-tar.124-10b.JA3 to c1250-rcvk9w8-tar.default
5. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
6. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
7. Hold the mode button and power off the AP.
8. Power back the AP while continually holding the mode button for 20-30
seconds.
*Method 2 : ( Archive Command )*
1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.3) to the tftp server (your laptop or pc).
3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com or
http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4(10b)JA3&fileId=271159&treeMdfId=278875243&treeName=Wireless
4. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
5. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
6. On AP, type archive download-sw /overwrite /force-reload tftp:///c1250-rcvk9w8-tar.124-10b.JA3
Going the other way (lwapp to autonomous)
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
If you need to manually "prime" the LWAPP:
AP#lwapp ap ip address
AP#lwapp ap ip default-gateway
AP#lwapp ap controller ip address
AP#lwapp ap hostname
(optional)
Hope someone finds this useful!

Admin Tool Error while installing C Compiler on Solaris 9 machine.

Hi,
I tried to install C Complier in Solaris 9 Sparc machine(It wasnot installed initially and hence I tried to install) and i got an error message "Admintool :Error ,add software failed"
Can anyone guide me on how to troubleshoot this problem?
Thanks
Bala

Does install from command line work?

Designjet 70 maintenance tool won't install and Windows 7 64 bit machine

Downloaded maintenance software from HP and it seems to have installed.
Sorry for the previous message.

Hello @RicoBall,
Welcome to the HP Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the HP Designjet 70 is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

OBIEE Admin Tool and Hyperion ADM issue

I'm trying to connect to one HFM Application from OBIEE admin tool, I have installed in Server1 OBIEE and ADM Link and Server2 HFM
Products Installed: OBIEE 11.1.1.7.0 (Win Server 2008 R2/ Server1), ADM Link 11.1.2.2 (Win Server 2008 R2/ Server1), HFM 11.1.2.2 (Win Server 2008 R2/ Server 2)
But i can't import metadata objects, in the connection I got this error message:
[nQSError: 77031] Error occurs while calling remote service ADMImportService. Details: Details: [[
Failed to connect to ADM.
com.hyperion.ap.APException: [1033] Native: -2147221164 Error Reference Number: {059E2017-60C8-42C7-855A-F165AF034A40}<BR>Num: 0x80040154;Type: 1;DTime: 11/6/2013 12:01:55 PM;Svr: TEST;File: CHITRegistryWrapper.cpp;Line: 24;Ver: 11.1.2.2.000.3609;<BR>Num: 0x80040154;Type: 0;DTime: 11/6/2013 12:01:55 PM;Svr: TEST;File: CHsxClient.cpp;Line: 4023;Ver: 11.1.2.2.000.3609;<BR>Num: 0x80040154;Type: 0;DTime: 11/6/2013 12:01:55 PM;Svr: TEST;File: HsvADMDriverSessionInternal.cpp;Line: 326;Ver: 11.1.2.2.000.3609;
at com.hyperion.ap.adm.HssEnvironment.createException(HssEnvironment.java:195)
at com.hyperion.ap.adm.HssConnSession.HssAdmGetErrors(HssConnSession.java:612)
at com.hyperion.ap.adm.HssConnSession.OpenConnection(HssConnSession.java:2544)
at com.hyperion.ap.adm.HssConnSession.HssConnOpenConnection(HssConnSession.java:923)
at com.hyperion.ap.adm.HssConnSessionWrapper.HssConnOpenConnection(HssConnSessionWrapper.java:1483)
at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:912)
at com.hyperion.ap.adm.HssAdm.internal_openConnection(HssAdm.java:1799)
at com.hyperion.ap.adm.HssAdm.openConnection(HssAdm.java:1065)
at oracle.bi.integration.admimport.service.ADMImportClient.openConnection(ADMImportClient.java:64)
at oracle.bi.integration.admimport.service.ADMImportService.openConnection(ADMImportService.java:159)
at oracle.bi.integration.admimport.service.ADMImportService.executeDataSources(ADMImportService.java:146)
at oracle.bi.integration.admimport.service.ADMImportService.execute(ADMImportService.java:67)
at oracle.bi.integration.javahost.ServiceRpcCall.processMessageInternal(ServiceRpcCall.java:55)
at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:251)
at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:193)
at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:207)
at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:155)
at java.lang.Thread.run(Thread.java:662)
My data connection are the folow:
Connection Type: Hyperion ADM
URL:adm:native:HsvADMDriver:SERVER:HFM_APLLICATION
User Name:admin
Password: xxxxxxxx
Please I hope someone can help me.

Login to Oracle Enterprise Manager Goto -> Business Intelligence -> coreapplication
Click - Capicity Managment Tab in Right side -> Performance -> Check Disable Disallow Online RPD Updates
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/querycaching.htm#BCGCACHF
If helps pls mark

BI Admin Tool in Linux Image

Hi,
Dose BIC2G Linux image contains BI Administration Tool?
Nilaksha.

user473138 wrote:
Can you please share the steps on how you could open the RPD from linux?Hi,
The Admin tool cannot be installed on the linux image. Instead we have to install it on the host windows machine. you may want to download the client OTN.Create a DSN to your host machine and you can use it in Admin tool.
Hope this helps.
Thank you,
Dhar

Oracle Admin Tool Client

Hi ,
I'm facing a lot of problems with Oracle BI admin client Tool that I installed in my Windows 7 to use my cubes ( my Oracle BI server is in a Unix machine ).
The error that I face is *[nQSError : 6001] Connection failed for Remoote Service-JavaHost-AWImportService11G with message [nQSError : 77029] Java Host is not available inside the function AWImportService11G of SAW RPC modules ...*
I'm sure my NSQConfig file is okey, with the server address and port 9810 in Javahost config. And I made sure Javahost sevice is running .
I heard that Oracle BI admin tool Client is a light version of the whole Oracle BI, so there are some missing components ... I thought about unstalling the whole Oracle BI in my windows 7 machine to use my cubes that are in the unix machine.
Do you think it's a good idea ? is there anyone facing the same problem ?
Thax all !
Edited by: 969348 on 23 nov. 2012 05:47

Oh, I mean uninsall Oracle BI Admin Tool Client , and install the whole Oracle Business Intelligence in my Windows 7 32 bits.
Well, the whole story is that :
-I have a Oracle BI system in a remoot unix server.
-I used AWM in my Win7 32 , to create cubes : Now, I need to administrate my cubes to make reports.
-So, I installed Oracle BI Admin tool Client in my Win7 machine : But when I try to create a New repository to get my cubes , I get the nQSError 60001 and 77029 Errors, even If I made the right changes.
-Now, As I'm stuck, I'm thinking about an alternative... I don't know if installing the whole Oracle BI in my Win7 machine is a good alternative ... And if I do so, what type of Installation I need to follow ...
Thanks for your reply

Server Admin Tools 10.6.3 Won't Install

Each of the Snow Leopard Servers I administer will not install the latest Server Admin Tools 10.6.3. On each server, I'm running 10.6.3 but the Admin Tools installer does not recognize that I'm running OS X Server - it won't install on any of the server volumes.
Server Admin Tools are in /Applications/Server and all updates are in place.
Apple, what gives?

Chris-
If your server is running 10.6.3 you don't need to install or update the Admin Tools: you already have the up-to-date Admin Tools. The 10.6.3 Admin Tools installer is for installing or updating the Tools on a non-server Mac.

Server Admin Tools 10.4.7 Won't Install on Leopard Client

When you attempt to install Server Admin Tools 10.4.7 on a Leopard client, when you get to the point about Selecting a Destination, you get a red stop-sign with an exclaimation point. When you select that disk, it says:
"You cannot install Server Administration Software on this volume. You are not allowed to install the software on this disk for an unknown reason."
I tried to open the package and manually extract the Server Admin Tools, but they do not run properly. I still cannot add computers to my managed list.
I have two machines, one that still has Server Admin 10.4.7 that was upgraded to Leopard without upgrading Server Admin. I am still having the problem. It seems that Leopard is creating the problem and not the Server Admin program.......
Message was edited by: Ron Yochum

Greetings,
Thanks for posting this I was so frustrated but now because of your post I wont have to go half way across the building with a monitor mouse and keyboard just to add a user.
Thanks so much.
Sincerely,
Jake.

Cannot Connect to new Installation with Admin Tool

Have installed BPC 7.5 SP4 Patch 4 on Windows 2008 64-bit. App/Web Server on one machine, SQL Server 2008 on 2nd machine,
Everything seems fine except access via servername - servername used in all the settings.
When trying to access the Administration to start installing new appsets, connect using ip address in admin tool and login using the software install user but will not verify user name/password.
Does anyone have any idea of the issue?
thanks
Lesley

In that case, I'd suggest you make sure both ethernet ports are unplugged from the RAID, power it off and on, plug a cable directly from a laptop to the RAID, set the IP of your laptop to 169.264.11.11 with subnet mask 255.255.0.0, then do "ping 255.255.255.255" and you should see a response from the IP address used by the RAID.
This question is very common here... there are other threads where I've answered this so I won't clarify further here.

HT1822 Mac OS X server admin tools: non-server editions of Mac OS 10.6?

On my iMac, I am running the installation of OS X that it shipped with + updates up to 10.6.8. I know there are server admin tools available on the Apple support website, that do stuff like manage groups. I am looking for a GUI to look at ALL the users, groups, permissions, etc. (including hidden ones like _www for apache) on my system, without having to dig through config files in /etc and/or use the dscl command line utility.
The referenced article says I can find the 10.6 tools on Apple support downloads:
Mac OS X Server v10.6
To administer Mac OS X Server v10.6, use the Server Admin Tools 10.6 on Mac OS X v10.6. You should match the version numbers of the server, tools, and admin workstation as closely as possible; for example, use Server Admin Tools version 10.6.8 on Mac OS X v10.6.8 to administer Mac OS X Server v10.6.8.
My questions are:
1. Where are the 10.6 tools on the apple support website? A search turns up versions for everything BUT 10.6.
2. Will the 10.6 tools work on 10.6.8 that is not a server edition of Mac OS?

The Server Tools you can download from Apple will install and run on OS X client, but they will only connect to and monitor OS X Server boxes.
So that won't get you where you want.
One command that will help you here - and which is present on OS X Server and OS X client - is dscl.
dscl . list /users
For details:
info dscl
or
man dscl
Or a web search, etc...

OS X 10.4.7 Admin Tool Won't Installing

Similar Messages

Maybe you are looking for