OS X 10.5 Leopard to ML

How do I upgrade from Leopard to Mountain Lion, with out buying Snow Leopard? I'm fine with wiping out my HDD.

Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

Similar Messages

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Previewing videos in Quick Look isn't the same in Snow Leopard.

Does previewing videos on Quick Look in Mac OS 10.6 Snow Leopard no longer allows you to use the two finger gesture to move forward or backwards in the video, or is it just me?

I can not do that either, then again, I never tried it in Leopard so... hope that helps

When i login to my banks online access point a new browser is opened and it takes up the full 27" display. ca i restrict the size of web browser screen used by tme online banking service? imac 27" OSX snow leopard 10.6.8

Intel iMac OSX Snow Leopard 10.6.8
I logon to bank via its internet portal and next screen takes up all 27" display.
Can this be controlled in any way or do I just put up with it, it is really annoying.

Thank you for your response. Whew...i omitted to say I use Firefox... tried to logon using Safari... same
result Installed Chrome ...same thing Installed Opera... this browser actually has in its Preferences menu
the capacity to set JavaScript Options under the Conent submenu... DISALLOWED all of resizing of windows,
moving of windows and ability of script to hide menu bar ... this fixes the screen to available browser size...
so my issue has at least this resolution. Thank you Flet Cheryl

Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Try a new profile. See [[Recovering important data from an old profile]]

I have a 27 in. iMac with the latest version of Snow Leopard. When Lion comes out, will it be software I purchase and download online? I am trying to prepare for cost and don't have a point of reference, having been a Windows guy until last summer.

I want to know what to expect in terms of moving from one OS to another. Having been a Windows guy until last summer, my only experience is going from one version of Windows to another, which is usually a fairly costly purchase. I will want to go to Lion, but as a retired teacher, my income is fixed. I am not looking for a specific price, I am sure that is unknown, but I would just like to know help Apple does these things so I won't be sadly surprised.

Historically Apple has sold OS X upgrades via DVD media however with the advent of the Mac Apple Store that throws another possibility into the mix. That's about as much as I can say as these forums don't allow us to speculate about future products. As for the cost historically Apple has priced OS X upgrades between $29-$129, the last upgrade (Snow Leopard) was only $29 but that was an exception. Again we cannot speculate on these forums about that. The good news is that Apple is unlike Microsoft which makes OS upgrades expensive and complicated. The choice with OS X is do you want a server version (most users don't need one) or a single computer license. The users that buy server versions tend to have a number of Macs they manage from a server, most consumers don't have this issue.
Keep reading the news, as you know Apple has announced a Summer release for Lion.
Upgrades on OS X are usually very simple. I've upgraded from Tiger to Leopard to Snow Leopard and each transition has been very easy. With any major OS upgrade there are some basic rules to follow, for example always, always, always backup prior to any update. When Lion is released to the general public post again for what to do to prepare or even do a Google search on "How to prepare for OS X upgrade" and you will find a number of articles that will provide some suggestions and valuable insight. You can also re-post here and users will be happy to assist.

Time Machine on Snow Leopard just doesn't work.

So I've had huge nightmares over the past few days over Time Machine.
So I've always been a big proponent of Time Machine. I always tell everyone that you NEED a backup solution, and while Time Machine may not be the be all and end all, it's a great starter solution for those that don't want any fuss.
But perhaps not anymore.
It just works, right? Well apparently not.
So a little while ago I performed a Time Machine-assisted hard drive swap for a MacBook (not mine). That is, I install a new drive, boot from SL DVD, perform a HD wipe, then restore from Time Machine. It seemed to go well.
Fast forward to more recently, I went on a trip overseas (Taiwan). While there, I obviously took a lot of photos, and it became that time again - purchase a new hard drive with more capacity for my MacBook Pro! HD were a little cheaper where I visited, so I not only bought a new drive for my MBP, but also a new drive for my wife's MB, as well as new external drives to upgrade our Time Machine drives.
While I was there, I decided to update my own Time Machine first - following the instructions from Apple's own knowledge base on the matter:
http://support.apple.com/kb/HT1427
I transferred my existing backups to the new drive to continue my Time Machine. I didn't notice any problem at the time.
Then I returned to my home country (New Zealand). First thing I did when I got back was to perform the Time Machine-assisted HD swap after making sure the OS were up-to-date as were their respective backups, on both my own MBP and my wife's MacBook.
That's when the troubles started.
First off, I noticed that a few images from my Aperture Library were missing. The album data and everything were there, but the actual files were not. They also did not exist anywhere on the Time Machine drive and as such never made it over to the new HD. Weird, I thought. They were there, clear as day on my original drive. They simply weren't backed up.
Now I'm aware of a few TM niggles, such as the false backups after verifying a disk, but I hadn't done that.
The second issue was much more major. My Wife's MB would be endlessly stuck on the white boot screen with the grey Apple logo. As it turns out, it's exactly this issue here:
https://discussions.apple.com/thread/2738620?threadID=2738620&tstart=74
In short, the fresh Time Machine backups I made before transferring to the new HD showed no sign of updating the /System/Library/Framework/Security.framework/Versions/A/Security package, which is REQUIRED for the Mac to boot into 10.6.7 (it had an old one from before).
Great, I thought, but maybe I can fix that by installing a fresh 10.6.7 combo update on the MB via target disk mode.
No dice. On trying, it goes all the way to the end, and then fails installation. I had to resort to copying over the correct, more recent security package just to get it to boot.
After booting, what to do? Who knows what other files Time Machine failed to update, and what consequences they would have. After putting back the original security package, I tried updating 10.6.7 again. Nope, no dmgs would open - i HAD to use the new Security package for anything to open. Fair enough, but even with that, the installation would inevitably fail.
Problem with the package? Nope. Tried a fresh download, and checked the SHA and everything.
Time to do some blitzing. I pulled out my trusty Snow Leopard DVD and did a reinstall on top. That's gotta get my problem, right? Well, nope. After resetting to 10.6.0, the 10.6.7 combo updater STILL failed on installation. Furthermore, the updater no longer worked on MY MBP either.
What gives?
As it turns out, it was related to this:
https://discussions.apple.com/message/11317470?messageID=11317470
In short, some files had the user immutable flag switched on, preventing changes from being made to those files (manifests as a little lock icon on the file icon). They included (and I'm sure not limited to) the Acknowledgement.rtfs in /Library/Documentation/, as well as a majority of the fonts in /Library/Fonts.
Checking back in the backup drives, it was clear that Time Machine was the culprit - instances of those files in the backups were also locked. When did that happen? Looking back, it looks like it happened when I transferred the backups from one Time Machine drive to another. But it wasn't all at once - in the first backup on one drive, one of the Acknowledgement.rtf files was locked, and the other one wasn't, but in the second onwards, both were. It was clear that Time Machine seemed to be doing it to those files. Which files and why? I have no idea.
So removing the uchg flag with "sudo chflags -R nouchg /" in terminal finally allowed me to apply the 10.6.7 combo update without failure.
So were the troubles over then?
Nope.
While checking if everything was fine, I noticed iPhoto on the MB had all the thumbs missing - after rebuilding, they weren't back, and only a .plist trashing fixed it (I consider this pretty normal - probably looking for the files on the old UUID drive or something).
But what gives? ALL the photos taken on the trip were gone! Not just the thumbs - the actual files were missing from the iPhoto Library! The data in the albums existed, just the actual files, just like my instance in Aperture on my own MBP.
Checked the Time Machine - again, it was clear Time Machine had completely stuffed up - the files were nowhere to be found on the Time Machine drive.
So currently, I've returned the original internal drive to the MacBook, performing a FRESH on new reformatted disk Time MAchine, and will use THAT to restore.
Nightmares, indeed. It's several days of work doing all the restores, considering I have limited drives to work with. And yes, rest-assured, I was doing enough permission repairs, and PRAM resets to ensure they weren't issues.
It occurs to me there are several faults with the most recent version of Time Machine (maybe 10.6.6 or something as that's when people had some of the issues above):
1) At some point in time, Time Machine may not update a necessary Security package (and probably other files too - I believe the files around it were also not updated), meaning that if you use that Time Machine to restore, the outdated package will cause your computer to fail to boot.
2) Transferring your backups to a new destination Time Machine drive may cause certain files to become user immutable or 'locked', with one consequence being you cannot update the OS.
3) Time Machine may fail to backup image files with the Aperture or iPhoto Library. Trying to remember back, I *think* this may be related to the fact that we changed time zones, as the unupdated image files were after the zones were changed. Strangely, every other file within the Library packages were updated, as album data was updated - just not the actual image files and folders.
Conclusion? I no longer trust Time Machine. The basic foundation of a backup service is that you trust it to do what it's supposed to do. After all this, how can I?
You might think they are isolated incidents, but they were occurring on two Macs that I have, and they same errors can be found in others.I think I have detailed some root causes, but who really knows.
At any rate you should keep an eye on at least these files I have detailed. Would love to hear Pondini on the matter, as I know he knows a lot about Time Machine.

Someone has suggested just installing Snow Leopard on the machine. Will that work?
If you can find a copy of the workstation version of Snow Leopard shipped with the same model of Mac mini, yes. Apple has not, to my knowledge, shipped a retail version of Snow Leopard new enough to boot your mini.
I've also heard there is a way to install SL while connected to my old Powerbook in order to suck the entire old drive onto the new machine in an operable manner. Is this accurate, and can this be done if my old machine is the Powerbook on the old apple chip when the new machine is intel based
No, it's not accurate. The OS on your PowerBook will not boot your mini.
what are the differences between the single pack and the family pack?
If you mean single and family pack of Mac OS X, the single pack is licensed for installation on one computer only, while the family pack is licensed for installation on up to five Macs.
Regards.
Message was edited by: Dave Sawyer

Mail wont open in Leopard

Have upgraded to Leopard also installed XP Pro in NTFS format, I use Leopard for all day to day stuff and XP Pro infrequently. When I try and launch MAIL the following message appears on screen MAIL WONT LAUNCH. During the set up of XP Pro I went on line and validated. I was wondering if this has blocked my mail. Safari is working fine and all other network links around the office are fine.
Thanks

Sounds like you've co-minglied an old install?
Check your MAIL app version...should be 4.2. If not and you can't find it, do a custom install from the SL DVD and choose to install related applications only.
If still no joy, try this - find the /Library/Preferences folder in your user/Home folder and then locate and delete this file:
com.apple.mail.plist
*Caution* - doing this may clear your account settings so be sure to note those first in the event you are required to reconfigure, etc.

Icon bounces and iCal crashes immediately in Leopard

I did not even have a chance to check email notification issues.
iCal fails to open since 10.5 upgrade.
the icon bounces in the dock, iCal windows fleshes for a split of a second - and that is it. Apparently, something tells iCal to quit, as it is not noticed by the system as failure. I do not get the usual report to Apple thing after other crashes.
I tried deleting all my iCal files (calendars, plists, calendar entries, iSync files), but the only change is, after the first run, the iCal launches and quits much faster.
Creating other account makes it possible to run iCal over there, so one of my original user files or permissions is perhaps corrupt.

I was in the same boat with iCal crashing after install of Leopard. And I may have an answer for you.
Observations:
Like you I tried the deletion of related caches and preferences, but also went through a reinstall of iLife '06 to no avail.There seemed to be another symptoms to the problem. When connecting my iPod to iTunes the Contacts tab shows syncing of calendars is not checked. When attempting to reestablish the sync, a message replies that there are no calendars available.
What worked for me:
1 Remove the calendars from your user library to the desktop.
2 Start ical
3 When the Blank calendar shows up go to File and import each of your calendars from the desktop.
Good Luck

Can't install Snow Leopard on MacBook Pro - DVD won't mount

I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.

How many times can you clean install leopard on the same computer?

How many times can you clean install leopard on the same computer? Will the leopard dvd run out of installations and not let you install anymore?

Hi colman Prez;
Now that the funny comments have been made, I have a serious question and that why are you worry about reinstalling Leopard with an Erase & Install which is what I take that you mean when you say clean install. In actually fact there is no such thing in OS X as a clean install.
I am curious because in all the years I have used OS X, I have yet to do an Erase & Install yet.
I know with Windows that they suggest reformatting and reinstalling at the drop of a hat but that isn't true with OS X.
Allan

Upgraded to snow leopard, now safari scrolls a page down when space bar is hit and sometimes crashes. Any ideas for a fix?

I just upgraded to the new snow leopard, now my Safari is acting loopy. At times, the page will scroll down when I hit the space bar. As I type this discussion the screen isn't paging down, but if I go to the tab where I have facebook loaded and hit the space bar, it acts as a page down key. I've had safari crash about 5 times tonight for no apparent reason. The delete key sometimes will act as a page back key. I really have no idea whats going on.
I've had keyboards go wacko on me before due to something being spilled on them or a wireless problem, but this keyboard is a wired keyboard and nothing was spilled on it. It's rather new and I'm quite certain it's not a keyboard issue.
No settings have been changed on the computer. The only thing different today from yesterday, is the fact that I upgraded to snow leopard.
Help would be pretty sweet.
Thanks,
Jason

I just upgraded to the new snow leopard, now my Safari is acting loopy. At times, the page will scroll down when I hit the space bar. As I type this discussion the screen isn't paging down, but if I go to the tab where I have facebook loaded and hit the space bar, it acts as a page down key. I've had safari crash about 5 times tonight for no apparent reason. The delete key sometimes will act as a page back key. I really have no idea whats going on.
I've had keyboards go wacko on me before due to something being spilled on them or a wireless problem, but this keyboard is a wired keyboard and nothing was spilled on it. It's rather new and I'm quite certain it's not a keyboard issue.
No settings have been changed on the computer. The only thing different today from yesterday, is the fact that I upgraded to snow leopard.
Help would be pretty sweet.
Thanks,
Jason

I have an old Imac G4 from 2003. I haven't used it in years, but I would like to start. What are my options for getting it up to date? Is it even worth the trouble/cost? I was hoping to at least get it running Snow leopard, if not Lion. Options?

I have an old Imac G4 from 2003. I would like to start using it again, however it is so out of date and runs too slowly. What are my options to update it? I really don't want to invest a ton of money - I might as well get a new one, so if there are any reasonable ways to get it to run Snow Leopard or even Lion, please help. I've also considered using a mac mini? Is that worth it either? I'm not sure which way to go here. I don't want to trash it, I feel like it can be a great computer if updated.

Presumably it is running tiger 10.4.11?
It may be able to run Leopard 10.5:
Leopard system requirements:
http://support.apple.com/kb/SP517
But that is as far as the old PPC Macs can go, and Leopard can cost up to $200 on Amazon.

Since installing Leopard, my iPhone is no longer recognized by iTunes.

Since installing Leopard, my iPhone is no longer recognized by iTunes and cannot synch, my music, videos, address book, and calendar. Could you let me know how I can get iTunes to recognize my iPhone again? It is odd since i plug the iPhone into the iMac and it is no longer recognized in iTunes and my address book and calendar. It worked fine before installing Leopard. You assistance is greatl

Hi
Have you tried the iPhone forum yet:
http://discussions.apple.com/category.jspa?categoryID=201
Steve

Client Upgraded from Tiger to Leopard Can No Longer Connect to Tiger Server

I just finished upgrading a G5 2GHz DP Powermac from Tiger to Leopard. This was an Archive and Install upgrade with importing the old settings. After verifying the account migration, including .Mac connectivity, and fixing all 3rd party software compatibilities/upgrades, I tried to connect to our Tiger 4.11 server by clicking on the server's Icon in the Shared section of the Finder Sidebar. The finder then switches to browse the the server for shares: "Connecting..." is displayed under the tool bar, with a "Share Screen..." and "Connect As..." buttons to the right.
At this point the "Connecting..." remains displayed with the spinning circle in the bottom right of the Finder window.... spinning. This situation continues for several minutes until is seems the system gives up.
If I click on the Path button on the Tool Bar, and go up to the Shared level, ALL the Shares on the Network are displayed, including all the Tiger Client machine shares. I can click on the triangle beside the Tiger Client's icon, and all the drives and home directories on the Mac are listed. All the client shares can be accessed without any issues. NOTE: There are no other Leopard clients on the LAN.
Prior to the Leopard upgrade, this client could connect to the Tiger server as well. All the other clients on the LAN can access the Tiger server also.
On the Leopard client I have tried clicking and the "Connect As..." button and using the menu "Connect to Server" and specifying the server's IP, and I get the same "Connecting..." message with a "non-connecting" result.
I can only assume that somehow the Account Name and password are not being passed correctly. But, using "Connect As..." should resolve that. However, "Connect As..." does not give me a user/password window!
If I check the AFP Access log on the Server, the only messages displayed are "Mounted Volume..." No messages in the error log, and no messages in the "Connections" section.
Can anyone help me figure out why the Leopard client can not connect to the Tiger Server?
My apologies if the description of my problem is a bit disjointed. I have been thrown into server admin and am learning "Trial by Fire".
Any help or suggestions on how to resolve this issue will be greatly appreciated.
Thanks
Gary
Message was edited by: Gary Sumlak

OK. A quick update.
After waiting for about 10 minutes for the rotating circle in the bottom right corner to stop, I was able to click on the "Connect As..." button. It took another 10 minutes, but the Connect As window eventual popped up. I entered the Userid and Password (saving to Keychain) and was able to see all the sharepoints on the the server. I browsed all the connected drives and folders without issue.
I then disconnected from the server. Reviewing the AFP logs on the server shows messages for the connection Login and Logout.
I then tried to reconnect to the server, and again another 10 minutes wait, although this time the Leopard client eventually connected automatically with the proper User, as per the AFP logs confirms.
Although, the client can now connect to the server, for it to take 10 minutes will be unacceptable to management, not to mention the end user. Tiger clients can connect in a couple seconds!
Is there a way to reduce the Leopard login time to, say, a couple seconds, like it does with the Tiger clients?
Again, any help or suggestions would be greatly appreciated.
Thanks
Gary

My MacBook Pro can no longer read/play/do anything with DVDs. I tried re-installing OS and Leopard but discs are rejected almost as soon as I put them in. For some reason my computer is rejecting any and all DVDs.

A few weeks ago I noticed my MacBook Pro was unable to open or read, etc... DVDs. This included DVDs with jpeg photos on them and DVD videos. I thought I might have deleted something necessary to DVD use. So I tried to re-install OS software. This included Snow Leopard and the original two Mac OS X discs. None would open or play or install. All were spit out of computer soon after I stuck them in.
So now what can I do? Thank you.

Do you recommend the canned air
It works just as well as the regular cleaning discs works. The only disadvantage is that you will need to keep purchasing canned air once it runs out. Cleaning discs last forever or until the tiny bristles on the disc wears out. Whichever comes first.
Any store that sells cds & dvds will also sell disc cleaners. Prices vary but they all do the same thing - clean your slot drive.

OS X 10.5 Leopard to ML

Similar Messages

Maybe you are looking for