OS X 10.7–10.10 iSub workarounds? USB audio devices?
The old Harman/Kardon iSub (USB subwoofer) never worked right with Intel Macs—but it was always a software issue, which could be worked around: I read years ago about people connecting USB headphones or speakers, which "tricked" the Mac into sending audio to the iSub. (In the case of headphones, I assume they would also use Audio MIDI Setup to make a Multi-Output device allowing sounds from your normal speakers at the same time as the 'phones.)
Does that trick still work in Yosemite? If not, when did it stop working? Can't seem to get it working on my 10.7 laptop with Jabra Revo Wireless headphones connected to USB (they have wired modes as well as wireless).
Any other workarounds? I'd love to get this thing going with either 10.7 or 10.10! Requiring an additional USB audio device isn't a great workaround... but I happen to have such a device anyway!
Thanks for any ideas.
removed TextEdit related files in /Users/gordan/Library/Preferences (mainly .lock files) , now it is working
Similar Messages
-
I'm not sure if this is still a issue for anyone but here it is.
Please note: that I've only tried this on a PPC running OSX 10.5.7 and "NOT" an Intel. AND Backup before you try this.
The procedure is as outlined on, "Paul Tung's" post, back on May 17, 2006.
Topic : Possible iSub Solution in Mac OS 10.4.6!!
http://discussions.apple.com/thread.jspa?threadID=485373
1) Download the following files:
a) Mac OS 10.5.3 Update or Mac OS 10.5.3 Combo Update. I used the Combo.
(Addresses an issue with stuttering video and audio playback in certain USB devices.) - I should read the "detailed information" link more often!
http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=19138&cat=60&platfor m=osx&method=sa/MacOSXUpdCombo10.5.3.dmg
b) Onyx
http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=00059&cat=15&platfor m=osx&method=sa/OnyX.dmg
c) Pacifist
http://www.charlessoft.com/Pacifist.dmg
2) Install Onyx and Pacifist programs
3) Go to: Macintosh HD (Your HD) -> System -> Library -> Extensions AND "Trash" the following file -> AppleUSBAudio.kext
and enter your admin password when prompted.
4) Open the downloaded Update. Start Pacifist, read or click OK on "First Launch Quick Start" window.
Click Open Package and then select the MacOSXUpdateCombo10.5.3.pkg (under DEVICES in Sidebar menu).
5) Once loaded, go to: System -> Library -> Extensions -> AND single click: AppleUSBAudio.kext.
6) Click the Install Button - Top left. It will ask you to install, and click install. (Make sure Allow Admin Privileges is selected).
7) Once done, quit Pacifist and start Onyx. This process will clear the "older" AppleUSBAudio.kext is out of the system.
8) In Onyx, go to Cleaning and make sure System and Kernel Caches is selected. Also, select Core Files and Temporary files too.
9) Once done, restart the computer, and go to the sound control panel and set your iSub.
Thank you PAUL TUNG! and "LONG LIVE MICHAEL JACKSON"- R.I.POS X 10.6 Snow Leoprd & ISUB
Summary:
The Harman Kardon iSub is not always working on Intel Macs without the use of other USB audio hardware. It is NOT working on the latest Intel Quad MAC PRO but is on a Dual G5 under OS X 10.5.8.
Steps to Reproduce:
1. Plug in iSub into any USB port.
2. Check Apple System Profiler. Device is correctly listed in Apple System Profiler, but does not work, and does not have separate volume control in the SOUND Control Panel.
Expected Results:
Expected iSub to work in conjunction with internal speakers, external USB speakers, or with external non-USB speakers, as it should.
Actual Results:
Device is listed in Apple System Profiler, but does not work, and does not have separate volume control
Regression:
This bug does not occur on PowerPC based Macs, just on Intel based Macs. Tested on a Power MAC dual g5 under OS X v10.5.8, Power Mac G4 400 Sawtooth, Power Mac G4 867, Power Mac G5 Dual 2GHz, Intel Mac Mini 1.5GHz Core Solo, Intel iMac 20" 2.0GHz Core Duo, Intel MacBook Pro 17" 2.16GHz Core Duo, Mac Pro Quad 3GHz under OS X 10.6 Snow Leopard.
Workaround not working in Snow Leopard:
Attach another USB audio device (sound card, USB headset) and select that for sound output. The iSub and it's volume control will magically appear in the sound control panel. Once you select Internal Speakers or another non-USB output, the iSub and it's volume control will disappear, and will cease outputting audio.
Initially, for bug # 4590777, Apple had listed it as a 'duplicate' bug, so there was some hope of having this fixed. As 10.4.4 was the initial OS X build that shipped on the first set of Intel Macs, maybe 10.4.5 would remedy this. Then the updates kept coming. And still, it wasn't working.
Once 10.4.9 was released, I tried the iSub again on all my Intel Macs. Again, no dice. So I sent in another bug report for Apple to fix. I was hoping this would be fixed prior to Leopard's launch. To my dismay, I received the following email from Apple.
"Hello, This is a follow-up to Bug ID# 5061928. We have received the following update regarding this bug:
<GMT14-Mar-2007 23:41:32GMT> Vanaja Pasumarthi:
Engineering has provided the following feedback regarding this issue:
Unfortunately, we have had to discontinue the support for iSub for built in audio. This is behaves (sic) as expected. Please disable iSub on yellow machines for all configurations.
We have closed this report as resolved. Thank you for taking the time to notify us of this issue.
Best Regards,
Vanaja P.
Apple Developer Connection
Worldwide Developer Relations"
This has been an issue for quite some time. As an owner of a few Intel based Macs, I'm disappointed that Apple has decided to discontinue support for their quickly emerging platform. It sort of goes against the statement from Apple that "Everything just works." Funny how the iSub does work in Windows Vista, however.
Please post this for the other iSub owners who might as well know this now instead of waiting even longer.
-Anthony V."
An iSub owner reply on using an iMic as a workaround. (this was before OS X 10.5/Leopard was released - see top of page for notes on iSub problems in Leopard.-Mike)
"I started trying workarounds (I found one that works!)
Here the setup, done with a pair of klipsches, an iMic and the iSub. First plug your iMic into your USB port on your Tower or USB Hub, Then plug your speakers in to speaker icon side of the iMic then plug in your iMic into another USB port or your USB hub. Check your Sound Preferences and you will have both of the Klispches and the iSub working!
(he later wrote)
I'm using the imic to insure I can use both my klipsch speakers at the same time I'm using the isub not one or the other. Adding another usb device only gives you the option on an intel mac to use your internal speaker on your tower and an isub. By pluging my speakers into the imic I have the ability to use and control the volume for both my external speakers and the isub.
-George H."
The isub issue is not fixed as of OS X 10.6 and the workaround does not seem to work either. Bob. -
Hiccups/hangs with pulseaudio and hd audio ALC883 (ClevoM570RU)
Hello guys,
well, as the topic already says, I'm having problems with pulseaudio combined with an ALC883 hd audio card
on a Clevo-M570RU. I got occassional hiccups and hangs and pulseaudio rewinds.
For some strange reason I can't kill pulseaudio without having it restart immediatley in the
current version of archlinux, but I can tell that prior versions showed that the wakeup timer of the pulseaudio
was increased steadily after buffer underruns occured.
Its quite rare that buffer underruns occur in which cases pulseaudio triggers a replay of the lost samples (resulting in a hiccup)
but I can trigger it about every 30-2mins secs with running flash in fullscreen (happens way less in normal window size mode).
Sometimes the general setup seems to be unstable, resulting in hiccups every like 10 secs, with increasing "severity".
So far I tried everything possible to fix this issue without any success so far. Maybe one of you guys has an insight into this.
So far I can only tell, that flash in fullscreen and also normal video playback in vlc (with VDPAU or without, fullscreen worse) trigger this issue way more often.
So chances are, this is triggered by the NVIDIA drivers, but the problem with that is, that I really need those for development work.
Also note that e.g. Ubuntu 9.04 did not trigger such an issue - maybe they had an workaround and didn't push it upstream (as usual).
More info:
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8.
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: snd_pcm_dump():
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Soft volume PCM
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Control: PCM Playback Volume
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: min_dB: -51
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: max_dB: 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: resolution: 256
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Its setup is:
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: format : S16_LE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: subformat : STD
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: channels : 2
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: rate : 48000
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: msbits : 16
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_size : 8192
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_time : 170666
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_step : 1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: avail_min : 15424
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_event : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: start_threshold : -1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_size : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: Its setup is:
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: format : S16_LE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: subformat : STD
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: channels : 2
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: rate : 48000
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: msbits : 16
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_size : 8192
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_time : 170666
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_step : 1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: avail_min : 15424
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: period_event : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: start_threshold : -1
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: silence_size : 0
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: appl_ptr : 15432
Feb 15 13:11:00 pulseaudio[2840]: alsa-util.c: hw_ptr : 15432
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: snd_pcm_avail_delay() returned strange values: delay 0 is less than avail 8.
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: snd_pcm_dump():
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Soft volume PCM
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Control: PCM Playback Volume
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: min_dB: -51
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: max_dB: 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: resolution: 256
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Its setup is:
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: format : S16_LE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: subformat : STD
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: channels : 2
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: rate : 48000
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: msbits : 16
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_size : 8192
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_time : 170666
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_step : 1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: avail_min : 15424
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_event : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: start_threshold : -1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_size : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: Its setup is:
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stream : CAPTURE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: access : MMAP_INTERLEAVED
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: format : S16_LE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: subformat : STD
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: channels : 2
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: rate : 48000
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: exact rate : 48000 (48000/1)
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: msbits : 16
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: buffer_size : 16384
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_size : 8192
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_time : 170666
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: tstamp_mode : ENABLE
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_step : 1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: avail_min : 15424
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: period_event : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: start_threshold : -1
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: stop_threshold : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_threshold: 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: silence_size : 0
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: boundary : 4611686018427387904
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: appl_ptr : 138856
Feb 15 13:11:24 pulseaudio[2865]: alsa-util.c: hw_ptr : 138856
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800M GTX] (rev a2)
06:00.0 Network controller: Intel Corporation WiFi Link 5100
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
0c:07.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller
0c:07.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller
0c:07.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller
0c:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
cat /etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=clevo-m720
options snd-hda-intel power_save=0
options snd-hda-intel enable_msi=1
Note that these options were added for further tests, they make absolutely no difference to the problem when left out.
lsmod
Module Size Used by
cryptd 7709 0
aes_x86_64 7428 3
aes_generic 26314 1 aes_x86_64
ipv6 280810 20
btusb 11689 0
bluetooth 53970 1 btusb
fuse 64912 3
arc4 1394 2
cpufreq_ondemand 8716 0
nvidia 10084294 40
ecb 2057 2
snd_usb_audio 87191 2
acpi_cpufreq 5977 1
freq_table 2339 2 cpufreq_ondemand,acpi_cpufreq
mperf 1259 1 acpi_cpufreq
snd_usbmidi_lib 18484 1 snd_usb_audio
iwlagn 358041 0
snd_rawmidi 19525 1 snd_usbmidi_lib
iwlcore 92743 1 iwlagn
snd_seq_dummy 1479 0
snd_seq_oss 29368 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50594 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39669 0
snd_mixer_oss 17858 1 snd_pcm_oss
usbhid 36375 0
hid 77863 1 usbhid
joydev 10183 0
sg 25972 0
snd_hda_codec_si3054 3870 1
mac80211 199564 2 iwlagn,iwlcore
snd_hda_codec_realtek 295557 1
lirc_ite8709 5705 0
snd_hda_intel 21837 4
video 11923 0
output 1988 1 video
usb_storage 43276 0
uas 8170 0
sdhci_pci 7454 0
lirc_dev 9759 1 lirc_ite8709
snd_hda_codec 74609 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
uhci_hcd 22230 0
ac 3217 0
thermal 7890 0
processor 25265 3 acpi_cpufreq
container 2541 0
button 4882 0
battery 10279 0
firewire_ohci 26921 0
intel_agp 10504 0
cfg80211 139317 3 iwlagn,iwlcore,mac80211
intel_gtt 15215 1 intel_agp
psmouse 53237 0
firewire_core 49974 1 firewire_ohci
snd_hwdep 6222 2 snd_usb_audio,snd_hda_codec
r8169 36286 0
snd_pcm 72481 6 snd_usb_audio,snd_pcm_oss,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_timer 19537 2 snd_seq,snd_pcm
snd 58938 26 snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
ehci_hcd 37571 0
soundcore 6161 1 snd
mii 3842 1 r8169
usbcore 139048 9 btusb,snd_usb_audio,snd_usbmidi_lib,usbhid,usb_storage,uas,uhci_hcd,ehci_hcd
serio_raw 4566 0
pcspkr 1835 0
crc_itu_t 1313 1 firewire_core
sdhci 17174 1 sdhci_pci
shpchp 26725 0
i2c_i801 8230 0
wmi 8061 0
snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
mmc_core 62378 1 sdhci
pci_hotplug 24655 1 shpchp
i2c_core 19078 2 nvidia,i2c_i801
evdev 9361 19
iTCO_wdt 10925 0
iTCO_vendor_support 1817 1 iTCO_wdt
rfkill 16122 2 bluetooth,cfg80211
ext3 125159 2
jbd 46953 1 ext3
mbcache 5802 1 ext3
sr_mod 15402 0
cdrom 36363 1 sr_mod
sd_mod 27120 4
pata_acpi 3296 0
ata_piix 21670 3
libata 169364 2 pata_acpi,ata_piix
scsi_mod 125814 6 sg,usb_storage,uas,sr_mod,sd_mod,libata
cat /etc/rc.conf | grep DAEMONS=
DAEMONS=(syslog-ng !network netfs dbus hal networkmanager !wicd alsa crond @postgresql irqbalance kdm)
Leaving out irqbalance doesn't change anything either.
uname -a
Linux - 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 20:00:33 CET 2011 x86_64 Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz GenuineIntel GNU/Linux
yaourt -Q nvidia pulseaudio libvdpau
extra/nvidia 260.19.36-2
extra/pulseaudio 0.9.22-2
extra/libvdpau 0.4.1-1
extra/alsa-lib 1.0.23-2
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audio [USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'd be really thankful for any hint that could lead to the solution of the problem.
Regards
aprioriIf i run
modprobe snd_hda_intel vendor=0x10de product=0x0e0a
then this gets printed to the kernel log
[ 655.731520] snd_hda_intel: unknown parameter 'vendor' ignored
[ 655.731527] snd_hda_intel: unknown parameter 'product' ignored
[ 655.731856] hda_intel: Disabling MSI
[ 655.731871] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 656.739954] hda-intel 0000:01:00.1: Codec #0 probe error; disabling it...
I've tried vid, pid, vendor_id and product_id as parameters, none work. And if i issue modinfo on this module i can't really find a parameter that looks like vendor/product id.
The same happens if i try adding parameters to the loading of snd_hda_codec_hdmi. -
Flash Player 9 video yes audio no
My Flash Player 9 worked well before, now I don't have audio
when playing i.e. YouTube, etc. Did reinstall and all the same
again. No audio. All other stuff WMP11, Real Player, Quick Time are
working fine video and audio. Anyone knows what could it be causing
this problem ???Hello roperone !
Thank you for your assistance but it didn't worked for me.
Below is description of my machine:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name VIVAN1
System Manufacturer Hewlett-Packard
System Model HP Compaq nc6320
System Type X86-based PC
Processor x86 Family 6 Model 14 Stepping 8 GenuineIntel ~1828
Mhz
Processor x86 Family 6 Model 14 Stepping 8 GenuineIntel ~1828
Mhz
BIOS Version/Date Hewlett-Packard 68YDU Ver. F.0B, 12/15/2006
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2765
(xpsp.050928-1517)"
Total Physical Memory 1,024.00 MB
Available Physical Memory 115.53 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 2.39 GB
Page File C:\pagefile.sys
Name SoundMAX Integrated Digital HD Audio
Manufacturer Analog Devices
Status OK
PNP Device ID
HDAUDIO\FUNC_01&VEN_11D4&DEV_1981&SUBSYS_103C30AA&REV_1002\4&2A4C52EC&0&0001
Driver c:\windows\system32\drivers\adihdaud.sys (5.10.01.4321
built by: WinDDK, 172.00 KB (176,128 bytes), 2/28/2006 14:36)
Name USB Audio Device
Manufacturer (Generic USB Audio)
Status OK
PNP Device ID
USB\VID_062A&PID_9004&MI_00\6&1D2D687&0&0000
Driver c:\windows\system32\drivers\usbaudio.sys
(5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 57.88 KB (59,264 bytes),
1/9/2007 18:45)
Name Bluetooth Audio
Manufacturer WIDCOMM
Status OK
PNP Device ID
{95C7A0A0-3094-11D7-A202-00508B9D7D5A}\BTAUDIO\1&30EE4AD&0&1000000030000
Driver c:\windows\system32\drivers\btaudio.sys (4.0.1.3300,
392.25 KB (401,664 bytes), 1/18/2006 19:09)
Name Bluetooth High Quality Audio
Manufacturer WIDCOMM
Status OK
PNP Device ID
{95C7A0A0-3094-11D7-A202-00508B9D7D5A}\BTWAUDIO\1&30EE4AD&0&1000000030001
Driver c:\windows\system32\drivers\btaudio.sys (4.0.1.3300,
392.25 KB (401,664 bytes), 1/18/2006 19:09)
Also, I have WMP, Real Player and Quick Time installed and
Flash Player 9 as well. Well, your post helped me and gave me an
idea where to look in my machine for the problem and I discovered
these facts:
1. My speakers are working fine
2. My mic's are working fine
3. My sound card and driver works fine SoundMAX HD Audio
4. All my players work fine except audio when playing FP9
5. My windows sound recorder does not work at all
6. I cannot play MIDI files by default Microsoft Synth and I
have to use Quick Time to play it.
7. I cannot play my default ( and other themes ) system
sounds
8. Also, I can see Microsoft GS wavetable SW Synth when
setting Audio Properties but after apply it disappears again.
9. My all drivers are updated and machine as well.
So, I did realize that problem is in default Microsoft
Windows MIDI Synth like you also found it but after spending hours
on the forums and use nets I couldn't find any solution to work
around this problem except to reinstall my windows. I also can
confirm that this problem have nothing to do with different codec
installed like AC3, ffdshow etc.
Furthermore, there is no any help on HP Support site for this
kind of problem.
SO, IF I WOULDN'T BE ABLE TO FIND WORKAROUND SOLUTION I WILL
BE FORCED TO REINSTALL MY WINDOWS AND HAVE AT LEAST 8 HOURS OF
"FUN" TO SET UP ALL THE STUFF I HAVE NOW ON MY COMPUTER !!!
SOMETIMES I REALLY DO HATE WINDOWS AND THINKING TO SWITCH FOR A
LINUX !!! -
Satellite M40: USB Audio doesn't work properly in ACPI mode
Hi all,
I just bought a Satellite M40 laptop which purpose will be to be used as a mobile audio system.
For that, USB audio devices are a great solution.
Unfortunately, although it was working properly while recording (sound is perfect with all USB Audio compliant devices I could test), there's an issue in Playback as I got lots of clicks and pops.
After lots of tryings and google searches, I fixed the problem by switching from ACPI computer to Standard PC mode.
That's a workaround.
But this way, I don't know anymore what's my battery status, and my laptop do not shutdown automatically.
In fact, my laptop is no more managed as a laptop :(
I suspect a very serious issue in one of the Toshiba components management. Especially, I would not surprised to be told that power management leads to some regular short system freeze, and thus the 10ms USB audio buffers fall into underrun.
This would not bother me so much if I was not part of the technical support team of a company that is also launching some new USB audio products that will fail to work properly with laptops.
My question is :
Is there any driver / bios update that gets rid of this issue ?
If someone from the Toshiba technical support wants to handle this issue directly with me, I would be pleased to help him, as I'm concerned professionnaly and personnaly.
Thanks in advance.
[Edited by: admin]Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway. -
VT Advantage / IP Communicator
Does anyone know if IP communicator now supports video? I believe I saw a document on Cisco stating the new version of IP communicator supports the new version of VT Advantage.
Can anyone confirm or deny this?
ThanksIn the IP Comm 1.1.4 release notes...
Cisco VT Advantage
There are some known issues when using Cisco IP Communicator Release 1.1(4) with Cisco VT Advantage.
Problem Description (CSCee00053)
When changing a USB handset or headset, the user receives the following error message: "Audio Tuning Wizard cannot configure this device to play sound. Cisco IP Communicator may not function properly with this device."
Workaround: Reboot the PC and insert the USB device for Cisco IP Communicator followed by the USB device for Cisco VT Advantage.
See CSCee00053 for more information.
Problem Description (CSCee07575)
When using a USB Audio Device with Cisco IP Communicator at the same time as Cisco VT Advantage, users receive the following error message: "USB Controller Bandwidth Exceeded."
Workaround: Avoid using Cisco VT Advantage and a USB audio device with Cisco IP Communicator at the same time. Another workaround is to ensure that the Cisco VT Advantage camera and the USB audio device for Cisco IP Communicator are using separate USB ports on the PC.
See CSCee07575 for more information.
With information on how it works with IP Communicator, it sounds like it is supported.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipc/relns/ipcrn114.htm#wp1089115 -
How to select Thunderbolt audio with headphones plugged in?
Hello,
I'm currently using a late 2011 MacBook Pro with a Henge dock and two Thunderbold displays. If you're not familiar with the Henge dock, it has the connectors for the MacBook at the bottom and you drop the MacBook in to place. Very convenient when coming to the office in the morning.
My biggest issue has to do with headphone audio and the Thunderbolt audio. With the Henge dock I always have the headphone cable plugged in. It's imply an extender that allows me to plug headphones in when I want to use them. I've found that with the headphones plugged in, I'm unable to select the USB audio device for either Thunderbolt display.
When selecting either Display Audio device, it simply autoselects itself back to the headphones. I can't seem to use Thunderbolt audio if headphones are plugged in. This seems like a pretty large oversight, so I wouldn't be surprised if I was just missing something.
Does anyone have any suggestions on how to get this working? If it's not possible, any workarounds that won't cause me massive amounts of pain?
Thanks!
//TimDoes anyone have any suggestions for this, been quite awhile. :/
-Tim -
My newly bought Lindy USB Guitar lead is incompatible with Mountain Lion! Any suggestions?
Hi,
Advice needed.
I recently bought the Lindy USB Audio Guitar Cable. I have plugged it into the USB port of my MacBook Pro (running Mountain Lion) and the blue light has come on the USB end. When I go into System Preferences -------> Sounds --------> Input, nothing shows up to say that the cable has been recognised. I know that it should say something like 'C-Media USB Audio Device', but nothing! The USB slots work fine for all other peripherals i have, just not this.
I have spoken to Lindy and they suggested that it may be incompatable with Mountain Lion!! (Advertised as compatable with all Macs!)
Is there anything anyone can suggest to make this work? A 3rd party workaround? If not, does anyone know of a USB to Guitar lead that IS compatable with Mountain Lion?
Very frustrating.
ThanksFor your product, you'll probably just need to wait for the manufacturer to release a ML compatible driver.
As for other options, the one I've been using for about a year is IK Multimedia's iRig.
http://amzn.com/B003T1WCBW
It's actually designed for iPhone/iPad, but it also works perfectly with newer Macs that have a unified input/output headphone jack. -
I have a late 2012 Mini, running 10.8.2. I have a set of powered speakers plugged into the headphone jack. My TV is running on a direct HDMI connection. I can only stream sound through HDMI, or even select it as an output, if I unplug my headphone speaker plug. Apple's knowlege base says this is the case. I am looking for a way to have both plugged in all the time, and have the sound mirrored to both.
I use the speakers for itunes music, system sounds, skype, etc.. The HDMI sound is for steaming content to the TV. I don't want to have to reach around behind the computer and unplug/plug each time I switch, for a multitude of reasons. Any ideas out there? Google wasn't getting me very far. Maybe a terminal solution of some sort? Thanks in advance.it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)! -
ISub doesn't work on Intel iMac either :-(
It's the only device issue I have, but from 10.4.4 and now in 10.4.5 it receives power (the green light is lit), but emitts no sound, and is not recognized in System Preferences, Sound.
I'd like to have my iSub back.I have found a way to make our iSub work again on Intel Macs.
But this can't be done using only the iSub with the internal speakers or the computer's audio line out port.
If you use the iSub together with an external USB soundcard, and select the USB soundcard as the sound output, then the iSub volume control will show up and our lovely iSub will come alive again with the USB sound device attached.
low freq. sound will come out from the iSub and high freq. sounds will come out from the USB sound card's line output.
so you'll need the following:
1) USB sound output device (eg. iMic)
2) a pair of speaker connected to the USB sound output device's line out.
this is what I use:
1) Comodow USB 3D Sound Controller (PCC-PD552) - http://128star.com/catalog/images/PCC-PD552-GALLERY.gif
2) Creatve SBS Vivid 60 Speaker - http://images.creative.com/iss/images/products/headers/prod11425hdr_1_61.jpg
3) karman/kardon iSub USB (standalone version).
again, hope Apple will fix this issue in the next 10.4.7 so we don't have to use our iSub with an external output device.
Good Luck Everyone!
Lok
17" iMac Core Duo 1.83GHz Mac OS X (10.4.6) -
Harman Kardon iSub no longer supported. Any compatible sub-woofers around?
Ah, pangs of new technology! If you're shopping for any third party device, make absolutely sure it will be supported by the Intel Core Duo. While the sound is solid from the internal speakers, I still would like a sub-woofer. None of the ads I've looked at specify Core Duo compatibility. Luckily, I'm holding on to my old iMac and Powerbook, which gleefully recognize my iSub.
I have found a way to make our iSub work again on Intel Macs.
But this can't be done using only the iSub with the internal speakers or the computer's audio line out port.
If you use the iSub together with an external USB soundcard, and select the USB soundcard as the sound output, then the iSub volume control will show up and our lovely iSub will come alive again with the USB sound device attached.
low freq. sound will come out from the iSub and high freq. sounds will come out from the USB sound card's line output.
so you'll need the following:
1) USB sound output device (eg. iMic)
2) a pair of speaker connected to the USB sound output device's line out.
this is what I use:
1) Comodow USB 3D Sound Controller (PCC-PD552) - http://128star.com/catalog/images/PCC-PD552-GALLERY.gif
2) Creatve SBS Vivid 60 Speaker - http://images.creative.com/iss/images/products/headers/prod11425hdr_1_61.jpg
3) karman/kardon iSub USB (standalone version).
again, hope Apple will fix this issue in the next 10.4.7 so we don't have to use our iSub with an external output device.
Good Luck Everyone!
Lok -
Workarounds for Lightroom crash on Import...
Issue description
When importing or synchronizing folders in Lightroom 4, the application becomes unresponsive and Windows reports it as not working.
Event Viewer logs the following detail.
Event Viewer
Faulting application name: lightroom.exe, version: 4.4.0.11, time stamp: 0x514b016c
Faulting module name: wpdmanager.mox, version: 0.0.0.0, time stamp: 0x48a324a9
Exception code: 0xc0000005
Fault offset: 0x000000000001f885
Faulting process id: 0x24dc
Faulting application start time: 0x01ce745df5ec4da5
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4\lightroom.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4\moxplugins\wpdmanager.mox
Report Id: 360e1014-e051-11e2-9613-fca983d8aa44
Workaround
The following items each prevented the issue from occuring.
Unplug phone (android - Samsung Galaxy SII) from USB port or
Unlock phone.
My guess is that the Import... and Folder synchronization operations invokes Lightroom to scan all storage devices including USB attached devices. Lightroom seems to choke on connected devices that has an empty volume list.
Workaround #1: Unplugging the phone removes the device from the list. Lightroom only has to deal with C:\ and D:\ partitions which are hard disk drives.
Workaround #2: In my case, unlocking the phone will allow Windows to list available volumes on the device. Lightroom probably does not know how to handle scenarios involving connected devices that has empty volume sets. Some devices may need more interactions to allow Windows to list available volumes. For me, leaving the phone unplugged was an easier workaround.
Phone lock state
Volume List Screenshot
Lightroom crash event
Locked
Issue reproduced
Unlocked
Issue not reproducible
Investigation
To investigate the issue, I reproduced the issue using procmon.exe and filtered the trace to include events with Process Name = lightroom.exe.
Scanning the trace from most recent events to oldest, I noticed a RegQueryValue operation that resulted in NAME NOT FOUND. The detail that caught my eye was that the path included "SAMSUNG_ANDROID" which indicates Lightroom is doing something that involves my Samsung Galaxy SII phone that was connected via USB -- I don't know what and why.
As a wild trial-and-error test, I unplugged the phone. As a result, the issue could no longer be reproduced -- workaround #1.The second workaround was discovered after a few minutes of trial-and-error. I don't remember what my thought process was and am currently too lazy to type any more.
If this write-up helped you, awesome. If you have a similar issue but a different workaround, please share it!Great!
I had the same issue, that could be resolved by your suggestion.
Actually, I renamed the module wpdmanager.mox to kill it's activity.
Disadvantage of this is that you will not be able to import files from SD card, but I copy to HDD using explorer anyway.
I totaly agree with your conjecture.
Tak -
Hi,
just got my Mac Pro and plugged in my old iSub, but it didn't work. Then saw note on Apple Support about this very topic:
"Note: If you are using an Intel-based computer, an iSub will only work when USB speakers or a USB audio interface device are connected to the computer and selected as the default output device in Sound preferences."
I then got USB speakers, but they don't show up in the Sound Preferences although they work when I select "Line Out". Is there another kind of USB speaker to use? What is an example of a "USB audio interface device"?
Thanks!USB audio interfaces are kind of like a typical sound card on a PC: they provide a stereo input and a stereo output to your computer, along with other model dependant features, viaUSB. Some examples would be those made by Edirol, M-Audio, and some of the Mboxs by Digidesign. I am mostly aware of them because of their use during recording, so many of the ones I know about also have mic-pres and MIDI ports as well. They are typically limited to stereo in/out, but some support more channels and digital I/O.
this link shows a bunch and I think the Apple store sells em too:
http://www.sweetwater.com/store/category/c695
See if there is a driver/setup application that you can find for your USB speakers.. Installing that might get them to show in the Sound preferences and may provide some other functionality, too.
3ghz MacPro Mac OS X (10.4.8) 2g ram, 1900xt, digi002 -
So I thought everything was fine until an application told me I had 4gb of RAM which is a far cry from the installed 16gb.
I did plenty of digging around and narrowed it down to a couple possibilities, but first my investigation:
I started with free:
[vuvffufg@HereAndNow-Main ~]$ free
total used free shared buff/cache available
Mem: 4015688 858084 115144 24832 3042460 2860360
Swap: 16777212 22460 16754752
As you can see it shows their is 4gb of RAM much as the application did.
You can see I have 16gb of swap; I am aware and am not confusing swap with RAM, I damn well have 4x4gb sticks according to the memtest86+ option on boot.
So then I thought hardware and tried dmidecode --type memory:
[vuvffufg@HereAndNow-Main ~]$ sudo dmidecode --type memory
[sudo] password for vuvffufg:
# dmidecode 2.12
SMBIOS 2.7 present.
Handle 0x0008, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0009
0x000A
0x000B
0x000C
Enabled Error Correcting Capabilities:
None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 1
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 2 3
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 4 5
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 6 7
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x002E, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm0
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB481
Asset Tag: Dimm0_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0030, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm1
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm1_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Handle 0x0032, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm2
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB473
Asset Tag: Dimm2_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0034, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm3
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm3_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Found it quite strange that the OS can obviously see the memory it just isn't being allocated, also what is with the slow clock speeds?
I found a similar output with lshw.
So I moved on to checking how it is actually initialized in dmesg, and honestly a lot of what was output I don't quite understand, I noticed that some memory was being reserved by the RAM map given by BIOs yet have no obvious way of disabling the BIOs RAM scheduler.
[vuvffufg@HereAndNow-Main ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.2-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] tseg: 00bf800000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be857fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be858000-0x00000000bea2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bea30000-0x00000000bea39fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea3a000-0x00000000bee2bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bee2c000-0x00000000bf159fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[ 0.000000] [mem 0x13ee00000-0x13effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x13edfffff]
[ 0.000000] [mem 0x120000000-0x13edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x11fffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x11fffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe857fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbe7fffff] page 2M
[ 0.000000] [mem 0xbe800000-0xbe857fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] [mem 0xbf15a000-0xbf15afff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] [mem 0xbf361000-0xbf3fffff] page 4k
[ 0.000000] [mem 0xbf400000-0xbf7fffff] page 2M
[ 0.000000] RAMDISK: [mem 0x377f0000-0x37beffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA32070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA37D20 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000BEA32158 005BC1 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEE26F80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA37E18 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BEA37EB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEA37F00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEA37F40 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BEA37F78 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 0x00000000BEA39690 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff9000-0x13effcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013a600000-ffff88013e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbe857fff]
[ 0.000000] node 0: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] node 0: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x13effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13effffff]
[ 0.000000] On node 0 totalpages: 1039508
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12148 pages used for memmap
[ 0.000000] DMA32 zone: 777464 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258047 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe858000-0xbea2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea30000-0xbea39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea3a000-0xbee2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee2c000-0xbf159fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf15b000-0xbf360fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023243
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 4009504K/4158032K available (5533K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 148528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4018.290 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.43 BogoMIPS (lpj=13394300)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20141107
[ 0.002553] ACPI: All ACPI Tables successfully acquired
[ 0.002750] Security Framework initialized
[ 0.002758] Yama: becoming mindful.
[ 0.002999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004346] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004926] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004931] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005146] Initializing cgroup subsys memory
[ 0.005153] Initializing cgroup subsys devices
[ 0.005155] Initializing cgroup subsys freezer
[ 0.005158] Initializing cgroup subsys net_cls
[ 0.005160] Initializing cgroup subsys blkio
[ 0.005177] CPU: Physical Processor ID: 0
[ 0.005178] CPU: Processor Core ID: 0
[ 0.005180] mce: CPU supports 7 MCE banks
[ 0.005185] LVT offset 1 assigned for vector 0xf9
[ 0.005190] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.005254] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.005835] ftrace: allocating 21170 entries in 83 pages
[ 0.087004] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120030] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 0.224266] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224270] ... version: 0
[ 0.224271] ... bit width: 48
[ 0.224272] ... generic registers: 6
[ 0.224273] ... value mask: 0000ffffffffffff
[ 0.224274] ... max period: 00007fffffffffff
[ 0.224275] ... fixed-purpose events: 0
[ 0.224276] ... event mask: 000000000000003f
[ 0.237668] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.244346] x86: Booting SMP configuration:
[ 0.244347] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.354188] x86: Booted up 1 node, 8 CPUs
[ 0.354192] smpboot: Total of 8 processors activated (64318.50 BogoMIPS)
[ 0.364078] devtmpfs: initialized
[ 0.366485] PM: Registering ACPI NVS region [mem 0xbea3a000-0xbee2bfff] (4136960 bytes)
[ 0.366531] PM: Registering ACPI NVS region [mem 0xbf15b000-0xbf360fff] (2121728 bytes)
[ 0.366716] pinctrl core: initialized pinctrl subsystem
[ 0.366744] RTC time: 18:28:15, date: 04/01/15
[ 0.366834] NET: Registered protocol family 16
[ 0.377691] cpuidle: using governor ladder
[ 0.391032] cpuidle: using governor menu
[ 0.391080] ACPI: bus type PCI registered
[ 0.391082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.391143] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.391146] PCI: not using MMCONFIG
[ 0.391147] PCI: Using configuration type 1 for base access
[ 0.391148] PCI: Using configuration type 1 for extended access
[ 0.391412] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.391413] mtrr: probably your BIOS does not setup all CPUs.
[ 0.391413] mtrr: corrected configuration.
[ 0.404756] ACPI: Added _OSI(Module Device)
[ 0.404758] ACPI: Added _OSI(Processor Device)
[ 0.404759] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.404760] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.406816] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.410092] ACPI: Interpreter enabled
[ 0.410097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.410100] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.410113] ACPI: (supports S0 S3 S4 S5)
[ 0.410115] ACPI: Using IOAPIC for interrupt routing
[ 0.410239] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.410276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.410593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.416288] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.416292] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.416712] PCI host bridge to bus 0000:00
[ 0.416715] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.416717] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.416718] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.416720] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.416721] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.416723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.416724] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.416726] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.416735] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.416847] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.416951] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.416985] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.417032] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.417072] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.417104] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.417151] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.417185] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.417217] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.417263] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.417308] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.417322] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.417329] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.417336] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.417343] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.417350] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.417357] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
[ 0.417461] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.417471] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
[ 0.417556] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.417595] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.417609] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
[ 0.417671] pci 0000:00:12.2: supports D1 D2
[ 0.417672] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.417721] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.417760] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.417770] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
[ 0.417851] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.417891] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.417905] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
[ 0.417966] pci 0000:00:13.2: supports D1 D2
[ 0.417967] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.418015] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.418053] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.418166] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.418176] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.418183] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.418190] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.418197] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.418204] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.418219] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.418220] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.418221] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.418222] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.418300] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.418316] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.418365] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.418410] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.418445] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.418561] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.418627] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.418661] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.418671] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
[ 0.418754] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.418790] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.418800] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
[ 0.418883] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.418922] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.418936] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
[ 0.418998] pci 0000:00:16.2: supports D1 D2
[ 0.418999] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.419045] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.419083] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.419160] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.419231] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.419304] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.419379] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.419451] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.419570] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
[ 0.419581] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.419591] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.419600] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.419607] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.419614] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.419708] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.419718] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.424396] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.424400] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.424402] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.424406] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.424450] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.424463] pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe300fff 64bit]
[ 0.424519] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431063] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.431067] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.431115] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.431125] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.431131] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.431137] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.431143] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.431149] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.431155] pci 0000:03:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
[ 0.431161] pci 0000:03:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
[ 0.431194] pci 0000:03:00.0: PME# supported from D3hot
[ 0.437733] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.437737] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.437739] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.437784] pci 0000:04:06.0: [10ec:8169] type 00 class 0x020000
[ 0.437802] pci 0000:04:06.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.437812] pci 0000:04:06.0: reg 0x14: [mem 0xfe121000-0xfe1210ff]
[ 0.437855] pci 0000:04:06.0: reg 0x30: [mem 0xfe100000-0xfe11ffff pref]
[ 0.437888] pci 0000:04:06.0: supports D1 D2
[ 0.437889] pci 0000:04:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.437947] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.437965] pci 0000:04:0e.0: reg 0x10: [mem 0xfe120000-0xfe1207ff]
[ 0.437975] pci 0000:04:0e.0: reg 0x14: [io 0xc100-0xc17f]
[ 0.438055] pci 0000:04:0e.0: supports D2
[ 0.438056] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.438114] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.438117] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.438120] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.438123] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.438125] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.438126] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.438128] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.438129] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.438131] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.438132] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.438151] pci_bus 0000:00: on NUMA node 0
[ 0.438559] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.438620] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.438682] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.438744] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.438794] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.438856] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.438896] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.438935] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.439110] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.439112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439114] vgaarb: loaded
[ 0.439115] vgaarb: bridge control possible 0000:01:00.0
[ 0.439189] PCI: Using ACPI for IRQ routing
[ 0.445486] PCI: pci_cache_line_size set to 64 bytes
[ 0.445539] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.445541] e820: reserve RAM buffer [mem 0xbe858000-0xbfffffff]
[ 0.445542] e820: reserve RAM buffer [mem 0xbf15b000-0xbfffffff]
[ 0.445543] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.445544] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.445636] NetLabel: Initializing
[ 0.445637] NetLabel: domain hash size = 128
[ 0.445638] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.445647] NetLabel: unlabeled traffic allowed by default
[ 0.445664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.445666] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.447711] Switched to clocksource hpet
[ 0.453281] pnp: PnP ACPI init
[ 0.453370] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.453373] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.453631] system 00:01: [io 0x040b] has been reserved
[ 0.453633] system 00:01: [io 0x04d6] has been reserved
[ 0.453634] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.453636] system 00:01: [io 0x0c14] has been reserved
[ 0.453638] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.453639] system 00:01: [io 0x0c52] has been reserved
[ 0.453641] system 00:01: [io 0x0c6c] has been reserved
[ 0.453642] system 00:01: [io 0x0c6f] has been reserved
[ 0.453644] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.453646] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.453647] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.453649] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.453650] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.453652] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.453654] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.453655] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.453657] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.453659] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.453661] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.453663] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.453665] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.453667] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.453669] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.453671] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.453673] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.453675] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.453821] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.453823] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.453825] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.453827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454077] pnp 00:03: [dma 0 disabled]
[ 0.454116] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454146] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454202] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.454205] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454242] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454375] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.454377] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454493] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.454495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454597] pnp: PnP ACPI: found 9 devices
[ 0.461181] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.461184] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.461186] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.461189] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461192] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.461194] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.461198] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.461199] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.461202] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.461205] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.461207] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.461211] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.461217] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.461219] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.461221] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.461222] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.461224] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461225] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461227] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461228] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.461230] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.461231] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461233] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.461234] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.461236] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.461237] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.461239] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.461240] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.461241] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.461243] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
[ 0.461244] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
[ 0.461246] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461247] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461248] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461266] NET: Registered protocol family 2
[ 0.461445] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.461541] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.461669] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.461704] TCP: reno registered
[ 0.461711] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461786] NET: Registered protocol family 1
[ 0.771487] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.771739] PCI: CLS 64 bytes, default 64
[ 0.771777] Unpacking initramfs...
[ 0.818296] Freeing initrd memory: 4096K (ffff8800377f0000 - ffff880037bf0000)
[ 0.818928] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.818930] AMD-Vi: Interrupt remapping enabled
[ 0.819044] AMD-Vi: Initialized for Passthrough Mode
[ 0.894098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.894100] software IO TLB [mem 0xba858000-0xbe858000] (64MB) mapped at [ffff8800ba858000-ffff8800be857fff]
[ 0.894417] perf: AMD NB counters detected
[ 0.894473] microcode: CPU0: patch_level=0x06000822
[ 0.894480] microcode: CPU1: patch_level=0x06000822
[ 0.894489] microcode: CPU2: patch_level=0x06000822
[ 0.894497] microcode: CPU3: patch_level=0x06000822
[ 0.894505] microcode: CPU4: patch_level=0x06000822
[ 0.894512] microcode: CPU5: patch_level=0x06000822
[ 0.894520] microcode: CPU6: patch_level=0x06000822
[ 0.894528] microcode: CPU7: patch_level=0x06000822
[ 0.894571] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.894574] LVT offset 0 assigned for vector 0x400
[ 0.894593] perf: AMD IBS detected (0x000000ff)
[ 0.894612] Scanning for low memory corruption every 60 seconds
[ 0.894922] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.894967] Initialise system trusted keyring
[ 0.895290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.896718] zpool: loaded
[ 0.896720] zbud: loaded
[ 0.896855] VFS: Disk quotas dquot_6.5.2
[ 0.896887] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.897041] Key type big_key registered
[ 0.897219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.897278] io scheduler noop registered
[ 0.897280] io scheduler deadline registered
[ 0.897311] io scheduler cfq registered (default)
[ 0.897582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.897597] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.897611] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.897612] vesafb: scrolling: redraw
[ 0.897613] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.897630] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010780000, using 5120k, total 5120k
[ 0.908558] Console: switching to colour frame buffer device 160x64
[ 0.919363] fb0: VESA VGA frame buffer device
[ 0.919406] GHES: HEST is not enabled!
[ 0.919477] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.939995] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.940350] Linux agpgart interface v0.103
[ 0.940412] rtc_cmos 00:04: RTC can wake from S4
[ 0.940505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.940526] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.940538] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.940741] TCP: cubic registered
[ 0.940831] NET: Registered protocol family 10
[ 0.941040] NET: Registered protocol family 17
[ 0.941657] Loading compiled-in X.509 certificates
[ 0.941667] registered taskstats version 1
[ 0.942038] Magic number: 11:895:492
[ 0.942102] rtc_cmos 00:04: setting system clock to 2015-04-01 18:28:16 UTC (1427912896)
[ 0.942169] PM: Hibernation image not present or could not be loaded.
[ 0.942657] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.942658] Write protecting the kernel read-only data: 8192k
[ 0.943029] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.943194] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.948897] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.960384] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.960767] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960819] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.965753] ACPI: bus type USB registered
[ 0.965786] usbcore: registered new interface driver usbfs
[ 0.965799] usbcore: registered new interface driver hub
[ 0.965834] SCSI subsystem initialized
[ 0.965866] usbcore: registered new device driver usb
[ 0.966937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.967199] QUIRK: Enable AMD PLL fix
[ 0.967214] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967216] ehci-pci: EHCI PCI platform driver
[ 0.967220] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.967486] hub 1-0:1.0: USB hub found
[ 0.967493] hub 1-0:1.0: 1 port detected
[ 0.967607] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967610] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.967627] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.967789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.967791] libata version 3.00 loaded.
[ 0.967804] hub 2-0:1.0: USB hub found
[ 0.967816] hub 2-0:1.0: 4 ports detected
[ 0.967981] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 0.967988] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.967999] ehci-pci 0000:00:12.2: debug port 1
[ 0.968051] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
[ 0.968187] ohci-pci: OHCI PCI platform driver
[ 0.978101] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.978260] hub 3-0:1.0: USB hub found
[ 0.978266] hub 3-0:1.0: 5 ports detected
[ 0.978471] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.978476] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.978478] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.978487] ehci-pci 0000:00:13.2: debug port 1
[ 0.978508] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
[ 0.988131] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.988272] hub 4-0:1.0: USB hub found
[ 0.988277] hub 4-0:1.0: 5 ports detected
[ 0.988478] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 0.988483] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 0.988485] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.988493] ehci-pci 0000:00:16.2: debug port 1
[ 0.988514] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
[ 0.998136] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 0.998291] hub 5-0:1.0: USB hub found
[ 0.998297] hub 5-0:1.0: 4 ports detected
[ 0.998517] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.998523] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 0.998580] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
[ 1.028176] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.055675] hub 6-0:1.0: USB hub found
[ 1.055685] hub 6-0:1.0: 5 ports detected
[ 1.055891] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.055896] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.055912] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
[ 1.112371] hub 7-0:1.0: USB hub found
[ 1.112380] hub 7-0:1.0: 5 ports detected
[ 1.112585] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.112589] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.112604] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
[ 1.169060] hub 8-0:1.0: USB hub found
[ 1.169069] hub 8-0:1.0: 2 ports detected
[ 1.169230] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.169234] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.169248] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
[ 1.225793] hub 9-0:1.0: USB hub found
[ 1.225802] hub 9-0:1.0: 4 ports detected
[ 1.226758] scsi host0: pata_atiixp
[ 1.226866] scsi host1: pata_atiixp
[ 1.226908] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.226910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.226935] ahci 0000:00:11.0: version 3.0
[ 1.227077] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.227079] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.227581] scsi host2: ahci
[ 1.227687] scsi host3: ahci
[ 1.227790] scsi host4: ahci
[ 1.227894] scsi host5: ahci
[ 1.227941] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 1.227943] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 1.227945] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 1.227947] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 1.228069] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.228071] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.228368] scsi host6: ahci
[ 1.228467] scsi host7: ahci
[ 1.228518] ata7: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 32
[ 1.228520] ata8: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 32
[ 1.271654] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.389601] ata1.00: supports DRM functions and may not be fully accessible
[ 1.389604] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
[ 1.389606] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.390019] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.395403] ata1.00: supports DRM functions and may not be fully accessible
[ 1.395767] ata1.00: configured for UDMA/33
[ 1.395882] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.403230] hub 1-1:1.0: USB hub found
[ 1.403326] hub 1-1:1.0: 4 ports detected
[ 1.528533] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550700d0d00, S400
[ 1.531822] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 1.541816] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.541830] usb 7-4: new full-speed USB device number 2 using ohci-pci
[ 1.548468] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.700539] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.705803] usbcore: registered new interface driver usbhid
[ 1.705804] usbhid: USB HID core driver
[ 1.707736] input: Turtle Beach Turtle Beach PX21 Headset as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.3/0003:10F5:0235.0001/input/input2
[ 1.711930] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711950] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.711968] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.714459] ata5.00: ATAPI: ATAPI iHAS424 B, GL14, max UDMA/100
[ 1.715245] ata5.00: configured for UDMA/100
[ 1.724780] ata6.00: ATAPI: ATAPI DVD A DH16A3L, 8H1F, max UDMA/100
[ 1.727806] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-4/input2
[ 1.738060] ata6.00: configured for UDMA/100
[ 1.738990] ata4.00: ATA-8: ST3750528AS, CC44, max UDMA/133
[ 1.738992] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.752852] ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 1.752855] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.758678] hid-generic 0003:10F5:0235.0001: input,hidraw1: USB HID v1.00 Device [Turtle Beach Turtle Beach PX21 Headset] on usb-0000:00:12.0-2/input3
[ 1.778584] ata4.00: configured for UDMA/133
[ 1.811234] ata3.00: configured for UDMA/133
[ 1.811298] scsi 2:0:0:0: Direct-Access ATA ST3250620AS E PQ: 0 ANSI: 5
[ 1.811508] scsi 3:0:0:0: Direct-Access ATA ST3750528AS CC44 PQ: 0 ANSI: 5
[ 1.815331] scsi 4:0:0:0: CD-ROM ATAPI iHAS424 B GL14 PQ: 0 ANSI: 5
[ 1.827195] scsi 5:0:0:0: CD-ROM ATAPI DVD A DH16A3L 8H1F PQ: 0 ANSI: 5
[ 1.838181] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.838236] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.838264] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.838266] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.838275] sd 0:0:0:0: [sda] Write Protect is off
[ 1.838279] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.838281] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.838307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838310] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.838312] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.838324] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.840319] sda: sda1 sda2
[ 1.840687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.851264] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.851267] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.851394] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.853588] sdc: sdc1 sdc2 sdc3 sdc4
[ 1.853870] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.859267] sdb: sdb1 sdb2
[ 1.859479] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.864173] sr 5:0:0:0: [sr1] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.864316] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 1.895367] tsc: Refined TSC clocksource calibration: 4018.371 MHz
[ 1.972095] usb 7-5: new full-speed USB device number 3 using ohci-pci
[ 2.143199] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0006/input/input3
[ 2.143245] hid-generic 0003:1532:0016.0006: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 2.345643] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.564353] random: nonblocking pool is initialized
[ 2.896115] Switched to clocksource tsc
[ 2.989972] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
[ 4.146364] EXT4-fs (sdc2): re-mounted. Opts: data=ordered
[ 5.242062] systemd-journald[198]: Received request to flush runtime journal from PID 1
[ 5.820530] ACPI: acpi_idle registered with cpuidle
[ 5.827968] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.088745] MCE: In-kernel MCE decoding enabled.
[ 6.088830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.088835] ACPI: Power Button [PWRB]
[ 6.088901] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.088903] ACPI: Power Button [PWRF]
[ 6.090720] wmi: Mapper loaded
[ 6.183901] EDAC MC: Ver: 3.0.0
[ 6.185457] AMD64 EDAC driver v3.4.0
[ 6.185490] EDAC amd64: DRAM ECC disabled.
[ 6.185502] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.196328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.252091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.252149] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.309452] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.309546] r8169 0000:04:06.0 (unnamed net_device) (uninitialized): not PCI Express
[ 6.309823] r8169 0000:04:06.0 eth0: RTL8169sb/8110sb at 0xffffc90000648000, d8:eb:97:81:7b:88, XID 10000000 IRQ 20
[ 6.309826] r8169 0000:04:06.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 6.316117] [drm] Initialized drm 1.1.0 20060810
[ 6.322842] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.322904] sp5100_tco: PCI Revision ID: 0x42
[ 6.322936] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.322947] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.322994] sp5100_tco: initialized (0xffffc9000064ab00). heartbeat=60 sec (nowayout=0)
[ 6.370784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.405509] r8169 0000:04:06.0 enp4s6: renamed from eth0
[ 6.666521] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.666531] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.728492] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.728504] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.728512] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.728518] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.728523] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.728528] sound hdaudioC0D0: inputs:
[ 6.728534] sound hdaudioC0D0: Front Mic=0x19
[ 6.728540] sound hdaudioC0D0: Rear Mic=0x18
[ 6.728545] sound hdaudioC0D0: Line=0x1a
[ 6.732452] AVX version of gcm_enc/dec engaged.
[ 6.732455] AES CTR mode by8 optimization enabled
[ 6.751090] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.751373] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.751805] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.752652] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.752768] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.752834] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 6.752899] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 6.752956] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 7.043010] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.043204] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 7.043899] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 7.094444] Adding 16777212k swap on /dev/sdc3. Priority:-1 extents:1 across:16777212k FS
[ 7.117737] usbcore: registered new interface driver snd-usb-audio
[ 7.126713] nvidia: module license 'NVIDIA' taints kernel.
[ 7.126718] Disabling lock debugging due to kernel taint
[ 7.138096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.138428] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 7.138435] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015
[ 7.485021] input: Logitech K400 as /devices/pci0000:00/0000:00:13.0/usb7/7-4/7-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0005/input/input18
[ 7.485233] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:13.0-4:1
[ 7.540890] mousedev: PS/2 mouse device common for all mice
[ 7.683577] kvm: Nested Virtualization enabled
[ 7.683587] kvm: Nested Paging enabled
[ 8.915498] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.970005] microcode: CPU0: new patch_level=0x06000832
[ 8.988739] microcode: CPU2: new patch_level=0x06000832
[ 8.994855] microcode: CPU4: new patch_level=0x06000832
[ 9.013677] microcode: CPU6: new patch_level=0x06000832
[ 9.123268] it87: Found IT8728F chip at 0x228, revision 1
[ 9.123288] it87: Beeping is supported
[ 10.039941] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0007/input/input19
[ 10.040305] hid-generic 0003:1532:0016.0007: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 10.361662] r8169 0000:04:06.0 enp4s6: link down
[ 10.361761] r8169 0000:04:06.0 enp4s6: link down
[ 10.701964] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.041655] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0008/input/input20
[ 11.042019] hid-generic 0003:1532:0016.0008: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 12.042896] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0009/input/input21
[ 12.043111] hid-generic 0003:1532:0016.0009: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 13.308991] NVRM: Your system is not currently configured to drive a VGA console
[ 13.308995] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 13.308996] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 13.308998] NVRM: drivers including, but not limited to, vesafb, may result in
[ 13.308999] NVRM: corruption and stability problems, and is not supported.
[ 13.823977] r8169 0000:04:06.0 enp4s6: link up
I figure there is plenty of unnecessary info in the dmesg and I apologize, but I want to find the problem of this illusive RAM.
My system specs:
AMD FX-8350
4x4gb CMZ8GX3M2A160 Corsair RAM
Gigabyte GA-990FXA-UD3
NVidia GT 640
Please can someone guide me to the answer of the missing RAM?
Last edited by vuvffufg (2015-04-02 18:37:31)Yes it is 64bit:
[vuvffufg@HereAndNow-Main ~]$ uname -a
Linux HereAndNow-Main 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux -
Laptop screen does not turn on after resume from suspend/hibernate
I use systemctl suspend/hibernate to resume, but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] tseg: 009ff00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
[ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
[ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
[ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
[ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
[ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
[ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
[ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1960479
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10155 pages used for memmap
[ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.380 MHz processor
[ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20141107
[ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
[ 0.015021] ACPI: All ACPI Tables successfully acquired
[ 0.016280] Security Framework initialized
[ 0.016286] Yama: becoming mindful.
[ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020472] Initializing cgroup subsys memory
[ 0.020479] Initializing cgroup subsys devices
[ 0.020482] Initializing cgroup subsys freezer
[ 0.020484] Initializing cgroup subsys net_cls
[ 0.020487] Initializing cgroup subsys blkio
[ 0.020510] CPU: Physical Processor ID: 0
[ 0.020511] CPU: Processor Core ID: 0
[ 0.020513] mce: CPU supports 6 MCE banks
[ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
[ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.021880] ftrace: allocating 21166 entries in 83 pages
[ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
[ 0.174081] Performance Events: AMD PMU driver.
[ 0.174086] ... version: 0
[ 0.174087] ... bit width: 48
[ 0.174088] ... generic registers: 4
[ 0.174089] ... value mask: 0000ffffffffffff
[ 0.174090] ... max period: 00007fffffffffff
[ 0.174091] ... fixed-purpose events: 0
[ 0.174092] ... event mask: 000000000000000f
[ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.197738] x86: Booting SMP configuration:
[ 0.197744] .... node #0, CPUs: #1 #2 #3
[ 0.250891] x86: Booted up 1 node, 4 CPUs
[ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
[ 0.252264] devtmpfs: initialized
[ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
[ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
[ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
[ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
[ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
[ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
[ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
[ 0.258125] pinctrl core: initialized pinctrl subsystem
[ 0.258173] RTC time: 18:50:52, date: 02/22/15
[ 0.258343] NET: Registered protocol family 16
[ 0.270952] cpuidle: using governor ladder
[ 0.284279] cpuidle: using governor menu
[ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.284493] ACPI: bus type PCI registered
[ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.285035] PCI: Using configuration type 1 for base access
[ 0.299021] ACPI: Added _OSI(Module Device)
[ 0.299025] ACPI: Added _OSI(Processor Device)
[ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
[ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.831121] ACPI: Interpreter enabled
[ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.831167] ACPI: (supports S0 S3 S4 S5)
[ 0.831169] ACPI: Using IOAPIC for interrupt routing
[ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.843782] PCI host bridge to bus 0000:00
[ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
[ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
[ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.844070] pci 0000:00:01.0: supports D1 D2
[ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
[ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.844272] pci 0000:00:01.1: supports D1 D2
[ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
[ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
[ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.845242] pci 0000:00:12.2: supports D1 D2
[ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.845727] pci 0000:00:13.2: supports D1 D2
[ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.846982] pci 0000:00:15.0: supports D1 D2
[ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.847225] pci 0000:00:15.1: supports D1 D2
[ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.847466] pci 0000:00:15.2: supports D1 D2
[ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.847956] pci 0000:00:16.2: supports D1 D2
[ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
[ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.849834] pci 0000:04:00.0: supports D1 D2
[ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.854860] pci 0000:05:00.0: supports D1 D2
[ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
[ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864464] vgaarb: loaded
[ 0.864466] vgaarb: bridge control possible 0000:00:01.0
[ 0.864788] PCI: Using ACPI for IRQ routing
[ 0.874741] PCI: pci_cache_line_size set to 64 bytes
[ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
[ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
[ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
[ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
[ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
[ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.875079] NetLabel: Initializing
[ 0.875081] NetLabel: domain hash size = 128
[ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.875101] NetLabel: unlabeled traffic allowed by default
[ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.877246] Switched to clocksource hpet
[ 0.884868] pnp: PnP ACPI init
[ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.886021] system 00:01: [io 0x040b] has been reserved
[ 0.886025] system 00:01: [io 0x04d6] has been reserved
[ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.886032] system 00:01: [io 0x0c14] has been reserved
[ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.886039] system 00:01: [io 0x0c52] has been reserved
[ 0.886042] system 00:01: [io 0x0c6c] has been reserved
[ 0.886046] system 00:01: [io 0x0c6f] has been reserved
[ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
[ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.887277] pnp: PnP ACPI: found 9 devices
[ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896259] NET: Registered protocol family 2
[ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.897360] TCP: reno registered
[ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897618] NET: Registered protocol family 1
[ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.838171] PCI: CLS 64 bytes, default 64
[ 1.838242] Unpacking initramfs...
[ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
[ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
[ 1.934495] microcode: CPU0: patch_level=0x03000014
[ 1.934537] microcode: CPU1: patch_level=0x03000014
[ 1.934580] microcode: CPU2: patch_level=0x03000014
[ 1.934625] microcode: CPU3: patch_level=0x03000014
[ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.934766] LVT offset 0 assigned for vector 0x400
[ 1.934817] perf: AMD IBS detected (0x000000ff)
[ 1.934854] Scanning for low memory corruption every 60 seconds
[ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.935315] Initialise system trusted keyring
[ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.937285] zpool: loaded
[ 1.937288] zbud: loaded
[ 1.937658] VFS: Disk quotas dquot_6.5.2
[ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.937948] Key type big_key registered
[ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.938508] io scheduler noop registered
[ 1.938511] io scheduler deadline registered
[ 1.938546] io scheduler cfq registered (default)
[ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 1.939552] vesafb: scrolling: redraw
[ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
[ 1.955978] Console: switching to colour frame buffer device 144x54
[ 1.972261] fb0: VESA VGA frame buffer device
[ 1.972328] GHES: HEST is not enabled!
[ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.973720] Linux agpgart interface v0.103
[ 1.973797] rtc_cmos 00:02: RTC can wake from S4
[ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.974434] TCP: cubic registered
[ 1.974593] NET: Registered protocol family 10
[ 1.975020] NET: Registered protocol family 17
[ 1.975476] Loading compiled-in X.509 certificates
[ 1.975502] registered taskstats version 1
[ 1.976231] Magic number: 3:326:848
[ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
[ 1.976444] PM: Hibernation image not present or could not be loaded.
[ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 1.977027] Write protecting the kernel read-only data: 8192k
[ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 1.979659] random: systemd urandom read with 1 bits of entropy available
[ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.980576] systemd[1]: Detected architecture 'x86-64'.
[ 1.980581] systemd[1]: Running in initial RAM disk.
[ 1.980590] systemd[1]: Running with unpopulated /etc.
[ 1.980603] systemd[1]: No hostname configured.
[ 1.980609] systemd[1]: Set hostname to <localhost>.
[ 1.980655] systemd[1]: Initializing machine ID from random generator.
[ 1.996373] systemd[1]: Populated /etc with preset unit settings.
[ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
[ 2.003390] systemd[1]: Created slice -.slice.
[ 2.003412] systemd[1]: Starting -.slice.
[ 2.005054] systemd[1]: Listening on Journal Audit Socket.
[ 2.005188] systemd[1]: Created slice system.slice.
[ 2.005200] systemd[1]: Starting system.slice.
[ 2.005218] systemd[1]: Reached target Swap.
[ 2.005226] systemd[1]: Starting Swap.
[ 2.005288] systemd[1]: Listening on udev Control Socket.
[ 2.005296] systemd[1]: Starting udev Control Socket.
[ 2.005312] systemd[1]: Reached target Slices.
[ 2.005320] systemd[1]: Starting Slices.
[ 2.005335] systemd[1]: Reached target Local File Systems.
[ 2.005342] systemd[1]: Starting Local File Systems.
[ 2.005358] systemd[1]: Reached target Timers.
[ 2.005366] systemd[1]: Starting Timers.
[ 2.005398] systemd[1]: Listening on udev Kernel Socket.
[ 2.005409] systemd[1]: Starting udev Kernel Socket.
[ 2.005430] systemd[1]: Reached target Paths.
[ 2.005441] systemd[1]: Starting Paths.
[ 2.005497] systemd[1]: Listening on Journal Socket.
[ 2.005510] systemd[1]: Starting Journal Socket.
[ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
[ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.007428] systemd[1]: Starting Journal Service...
[ 2.007472] systemd[1]: Reached target Sockets.
[ 2.007494] systemd[1]: Starting Sockets.
[ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
[ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
[ 2.021212] systemd[1]: Started udev Kernel Device Manager.
[ 2.024169] systemd[1]: Started udev Coldplug all Devices.
[ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.041719] SCSI subsystem initialized
[ 2.042505] ACPI: bus type USB registered
[ 2.042538] usbcore: registered new interface driver usbfs
[ 2.042552] usbcore: registered new interface driver hub
[ 2.042588] usbcore: registered new device driver usb
[ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.045154] systemd[1]: Started Journal Service.
[ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.045840] ohci-pci: OHCI PCI platform driver
[ 2.045993] QUIRK: Enable AMD PLL fix
[ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[ 2.046697] ehci-pci: EHCI PCI platform driver
[ 2.047833] libata version 3.00 loaded.
[ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.102273] hub 1-0:1.0: USB hub found
[ 2.102287] hub 1-0:1.0: 5 ports detected
[ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[ 2.159071] hub 2-0:1.0: USB hub found
[ 2.159085] hub 2-0:1.0: 5 ports detected
[ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
[ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.215699] hub 3-0:1.0: USB hub found
[ 2.215713] hub 3-0:1.0: 4 ports detected
[ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
[ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.271523] ehci-pci 0000:00:12.2: debug port 1
[ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.281694] hub 4-0:1.0: USB hub found
[ 2.281705] hub 4-0:1.0: 5 ports detected
[ 2.338086] hub 1-0:1.0: USB hub found
[ 2.338100] hub 1-0:1.0: 5 ports detected
[ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.338596] ehci-pci 0000:00:13.2: debug port 1
[ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.348396] hub 5-0:1.0: USB hub found
[ 2.348414] hub 5-0:1.0: 5 ports detected
[ 2.404806] hub 2-0:1.0: USB hub found
[ 2.404820] hub 2-0:1.0: 5 ports detected
[ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.461571] ehci-pci 0000:00:16.2: debug port 1
[ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.471768] hub 6-0:1.0: USB hub found
[ 2.471780] hub 6-0:1.0: 4 ports detected
[ 2.528139] hub 3-0:1.0: USB hub found
[ 2.528154] hub 3-0:1.0: 4 ports detected
[ 2.528415] ahci 0000:00:11.0: version 3.0
[ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.529180] scsi host0: ahci
[ 2.529664] scsi host1: ahci
[ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
[ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
[ 2.530551] scsi host2: pata_atiixp
[ 2.530815] scsi host3: pata_atiixp
[ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
[ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
[ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
[ 3.017307] ata1.00: configured for UDMA/133
[ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
[ 3.019278] ata2.00: configured for UDMA/100
[ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
[ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
[ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.084075] sda: sda1 sda2 sda3
[ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.528901] XFS (sda1): Mounting V4 Filesystem
[ 3.710527] XFS (sda1): Ending clean mount
[ 3.935255] Switched to clocksource tsc
[ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
[ 4.799287] random: nonblocking pool is initialized
[ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
[ 7.417234] ACPI: acpi_idle registered with cpuidle
[ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.544509] wmi: Mapper loaded
[ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.626522] acpi device:2b: registered as cooling_device4
[ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
[ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
[ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
[ 7.746486] ACPI: Lid Switch [LID]
[ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.746725] ACPI: Power Button [SLPB]
[ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.746880] ACPI: Power Button [PWRF]
[ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
[ 7.749951] ACPI: AC Adapter [AC0] (on-line)
[ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.061752] [drm] Initialized drm 1.1.0 20060810
[ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
[ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
[ 8.363138] kvm: Nested Virtualization enabled
[ 8.363151] kvm: Nested Paging enabled
[ 8.704039] [drm] radeon kernel modesetting enabled.
[ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 8.832364] AMD IOMMUv2 functionality not available on this system
[ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
[ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 9.031523] media: Linux media interface: v0.10
[ 9.102014] CRAT table not found
[ 9.102024] Finished initializing topology ret=0
[ 9.102177] kfd kfd: Initialized module
[ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
[ 9.102951] fb: switching to radeondrmfb from VESA VGA
[ 9.103002] Console: switching to colour dummy device 80x25
[ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
[ 9.104059] [drm] register mmio base: 0xFEB00000
[ 9.104063] [drm] register mmio size: 262144
[ 9.104144] ATOM BIOS: Toshiba
[ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.104235] [drm] RAM width 32bits DDR
[ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
[ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 9.104394] [TTM] Initializing pool allocator
[ 9.104407] [TTM] Initializing DMA pool allocator
[ 9.104455] [drm] radeon: 512M of VRAM memory ready
[ 9.104459] [drm] radeon: 1024M of GTT memory ready.
[ 9.104497] [drm] Loading SUMO Microcode
[ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
[ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.170455] Linux video capture interface: v2.00
[ 9.179293] mousedev: PS/2 mouse device common for all mice
[ 9.223473] [drm] Internal thermal controller without fan control
[ 9.223622] [drm] Found smc ucode version: 0x00011200
[ 9.223730] [drm] radeon: dpm initialized
[ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 9.282345] radeon 0000:00:01.0: WB enabled
[ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
[ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
[ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.283082] [drm] Driver supports precise vblank timestamp query.
[ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
[ 9.283145] [drm] radeon: irq initialized.
[ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.298931] rtlwifi: rtlwifi: wireless switch is on
[ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
[ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
[ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
[ 9.307058] sound hdaudioC0D2: inputs:
[ 9.307061] sound hdaudioC0D2: Mic=0x18
[ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
[ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
[ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
[ 9.369840] [drm] UVD initialized successfully.
[ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
[ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
[ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
[ 9.789309] usbcore: registered new interface driver uvcvideo
[ 9.789319] USB Video Class driver (1.1.1)
[ 9.871399] cfg80211: World regulatory domain updated:
[ 9.871412] cfg80211: DFS Master region: unset
[ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.890507] [drm] ib test on ring 5 succeeded
[ 9.911771] [drm] radeon atom DIG backlight initialized
[ 9.911776] [drm] Radeon Display Connectors
[ 9.911777] [drm] Connector 0:
[ 9.911779] [drm] VGA-1
[ 9.911780] [drm] HPD2
[ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.911783] [drm] Encoders:
[ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.911786] [drm] CRT1: NUTMEG
[ 9.911787] [drm] Connector 1:
[ 9.911788] [drm] LVDS-1
[ 9.911789] [drm] HPD1
[ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.911791] [drm] Encoders:
[ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.911793] [drm] LCD1: TRAVIS
[ 9.911794] [drm] Connector 2:
[ 9.911795] [drm] HDMI-A-1
[ 9.911796] [drm] HPD5
[ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 9.911799] [drm] Encoders:
[ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
[ 10.016569] [drm] fb mappable at 0xC0478000
[ 10.016576] [drm] vram apper at 0xC0000000
[ 10.016578] [drm] size 5787648
[ 10.016580] [drm] fb depth is 24
[ 10.016582] [drm] pitch is 6400
[ 10.016970] fbcon: radeondrmfb (fb0) is primary device
[ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
[ 10.143532] Console: switching to colour frame buffer device 200x56
[ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 10.150312] radeon 0000:00:01.0: registered panic notifier
[ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 10.194853] cfg80211: Calling CRDA for country: US
[ 10.231380] cfg80211: Regulatory domain changed to country: US
[ 10.231393] cfg80211: DFS Master region: FCC
[ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 10.422003] XFS (sda3): Mounting V5 Filesystem
[ 10.837256] XFS (sda3): Ending clean mount
[ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
[ 11.195453] microcode: CPU0: new patch_level=0x03000027
[ 11.195496] microcode: CPU1: new patch_level=0x03000027
[ 11.195601] microcode: CPU2: new patch_level=0x03000027
[ 11.195693] microcode: CPU3: new patch_level=0x03000027
[ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
[ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.753012] wlp4s0: authenticated
[ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
[ 13.758283] wlp4s0: associated
[ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 23.961417] PM: Syncing filesystems ... done.
[ 24.305227] PM: Preparing system for mem sleep
[ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 24.311542] PM: Entering mem sleep
[ 24.311898] Suspending console(s) (use no_console_suspend to debug)
[ 24.320753] wlp4s0: deauthenticating fSuspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.
Maybe you are looking for
-
How 2 assgin a character value to the auxillary cell
Hi, I'm assigning a character value to the auxiliary cell in the macro. But it gives me a dump. So do let me know can I assign a character value to the auxiliary cell ( I need to display this value for the alert text). Thanks, Siva.
-
How can I get my POP account showing in the inbox it's supposed to show in?
Hi-Until a couple of weeks ago all mail received from my IMAP and POP accounts would show up in the correct mailboxes in my Mail inbox list. (Only problem then was that sent mail would never show up in the sent mail folder--always stayed in the inbox
-
How to do a Facebook OAuth Login for HANA XS App in Trial Account?
Currently I am playing around with Facebook logins from the SAP HCP Trial account. Using the Facebook JavaScript SDK in an HTML5 app works easily with a few lines of code. Now I try to do it in an XS application. I found this blog about OAuth2 Authen
-
Hi A few hours ago I cleaned my Macbook Pro with Clean My Mac 2. I just cleared all the cache and language files and such. Now when I rebooted my Mac, I went into Windows 8.1 with BootCamp. So for so good. When I rebooted again, I wanted to go in OS
-
CSS: background is missing on live site
I've just relaunched a new version of www.modbury-heritage.co.uk and the background image is missing in my masthead in IE and FF. However when I preview in either browser locally, it shows up fine! Please could someone cast their eye over the site an