OS X 10.8.3 freezes occasionally with Thunderbolt external LaCie boot drive

When it works, it's awfully fast but occasionally it freezes. Why? Help!

As far as I know, natural scrolling is only for OS X, not for Windows, unless Apple has added this feature with the most recent drivers. However, if you want the natural scrolling, you can try using Trackpad++ > http://trackpad.powerplan7.com/

Similar Messages

Portege R500: XP installation with USB external CD/DVD drive - SOLUTION

Hello all !
Just wanted to take five minutes to inform you that installing XP on a Portege R500 with USB external CD/DVD drive is possible, even if you already have erased Vista and only with a bootable CD of Win XP in hand.
First go into your BIOS and check / set first boot device is CD/DVD drive
Start your installation of win XP from the CD without the F6 thing and let it go his way
After a while, the installation stops and says "can't find the file xxxx" and you are invited to say where this file is
You "just" have to replace the drive letter "C:" that is given by default with the drive letter of your CD/DVD (and let the rest just like it is) and the installation will continue until the next "can't find..." and you will again replace the drive letter, etc..
After a complete "manually assisted automatic" installation, you are welcome in Win XP !
Next question is "Where can I find my CD/DVD drive letter ?" and the answer is "this is the next letter after your last HDD letter" (I consider you have only your Portege with nothing else plugged than your CD/DVD) so in most cases it will be "E" because C: is the first partition of your HDD and D: is the hidden / recovery partition that win creates.
But do not worry, if you type the wrong letter you will have as many tries as you wish until you find the good one and for the following "can't find..." it will remain the same.
I hope these pieces of information will help some of you who want a clean install of win XP starting from a newly formatted HDD.
With kind Regards,
Mage.

What a great information!
Thanks a lot for this posting.
I think it could be useful for others here.
Bye

Will my mid 2010 iMac 27inch work with Thunderbolt external drives?*

will my mid 2010 iMac 27inch work with Thunderbolt external drives?*

No. Your iMac doesn't have Thunderbolt. You'll need a Firewire or USB drive.
Regards.

Living with a small SSD Boot Drive on New Pro??? Migration?

Hi Folks, I am seriously considering moving to a new mac pro from my 2008 tower. Aside from peripheral issues, my main concern is how to use the smaller SSD boot drive vs. my now current 2T drive? I've been a mac user since 1985 and my user folder with gigs of mail, documents, pictures (iPhoto and Aperture) and videos, etc., plus my application folder, is much larger than a 512 SSD. I now use a 3T drive as a separate movie/video FinalCut drive, so I've stored that separately. It just seems that if I try to do a migration of my current mac to a new one, I'm going to be creating major headaches and problems.
Before I buy something like that, I need to have a good strategy for a move.

You should try your cyrrent system and clone the OS to a 250GB SSD and 2-3TB data drive
The difference is nothing but remarjabke znd easy to do.
The 2600xt really should have been retured already and confivurd your system with 16GB RAM or more
Might be able to get more out if your Mac and get another year or more
Using one drive only is never a good idea.
System - data - projects - media - scratch - time machine
And putting scratch and system on multiple SSDs and on PCIE controller card
And then a GTX 680 or AMD Mac 7950 graphic card
The nMP is faster but it still needs work and yiurs isn't dead

Problem with USB External Hard Disk Drive

I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
I got same output from dmesg as Raistlfiren in the post before
# dmesg | tail
sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Info fld=0x0
I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
I can see that it is recognized by computer since it is shown with lsusb
# lsusb
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
# lsusb -d 13fd:0540 -v
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fd Initio Corporation
idProduct 0x0540
bcdDevice 0.00
iManufacturer 1 Initio
iProduct 2 MK6025GAS
iSerial 3 0010100500000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
Additionally, I have checked the content of /var/log/kernel.log
Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Sep 16 22:04:03 hramat kernel: Info fld=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
and /var/log/errors.log
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
Thank you for any help or suggestions
Matej

Thank you nTia89 for response. Sorry for not providing enough information.
I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
I did not tried to connect the disk to the computer directly, I will try it today.
Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
% fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
/dev/sda2 1531 6672 41303115 7 HPFS/NTFS
/dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
/dev/sda5 * 6673 11908 42058138+ 83 Linux
/dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
Disk /dev/sdb: 60.0 GB, 60011642880 bytes
64 heads, 32 sectors/track, 57231 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Disk /dev/sdb doesn't contain a valid partition table
Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
testdisk.log:
Thu Sep 17 19:09:26 2009
Command line: TestDisk
TestDisk 6.8, Data Recovery Utility, August 2007
Christophe GRENIER
Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
Using locale 'C'.
Hard disk list
Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Interface Advanced
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
NTFS at 8956/63/32
heads/cylinder 255 (NTFS) != 64 (HD)
sect/track 63 (NTFS) != 32 (HD)
filesystem size 24579387
sectors_per_cluster 8
mft_lcn 1024141
mftmirr_lcn 1650676
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
The following partitions can't be recovered:
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Interface Advanced
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : No
search_vista_part: 0
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
Can't open backup.log file: No such file or directory
interface_load
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
TestDisk exited normally.
fixdisktable first output:
% ./fixdisktable -d /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
Sectors: start= 111, end= 84116382, length= 84116272
Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
1: 8003 1000 833f e0ff 6f00 0000 3183 0305
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
fixdisktable second output:
% ./fixdisktable -d -r -v /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
Sectors: start= 34148, end=36028797017147916, length=36028797017113768
Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
Any suggestions?

Snow Leopard Instability - Possibly To Do With WD and Lacie FW Drives

I have an early 2009 2,66gHz Mac Pro. 7GB Ram.
At some point it got incredibly unstable running 10.6.4 (and earlier SL versions).
I've tried running it with stock RAM. Same issue. Tried clean re-installing. Same issue.
I post this here because I have the exact same system running on an iMac (cloned) - and it works fine with all my firewire drives so this must only affect certain (older?) machines.
I have read a lot of the "general instability" threads concerning SL and they seem all to have issues as diverse as mine; basically this is what happens for me:
I boot the machine and it works fine until a certain *key event* makes everything wonky. At this point, all these seemingly random issues pop up.
Such as, but not limited to:
The finder will crash and then give that darned "could not be relaunched -10601" error.
Most things to do with saving/exporting will fail and crash the corresponding app.
Toast will not launch.
AFP Server becomes unresponsive, as does screen sharing.
Opera will crash.
Disk Utility will crash on launch.
iTunes will crash, then fail to relaunch "checking library" then beachball.
I have tried to identify this *key event* because it might help the apple engineers get this fixed.
It seems sometimes to be something to do with Quicktime-based operations. Clicking around in Disk utility is also a good way of making it hang. It never happens spontaneously without user input. There is always something I click, that starts the whole thing off, although the trigger is generally very diverse. A friend of mine has the same issue, and he says he can always trigger it by re-scanning AU units (?) in Logic.
Once you have reached "Firewire ****" the machine needs to be hard-reset. A reboot gets as far as the blue screen with the spinning wheel. I don't know if it goes on spinning forever because I don't have forever to wait, but it does not reboot within 20min. If there are no firewire drives attached, none of this ever happens. I have a 2TB DualDrive FW800 WD and a 2TB Lacie which is also FW800.
Now I'm trying to identify which one of the two FW drives is responsible, and I will post back with results. I shall also try FW400. They are both brand new drives by the way.
I swear this is going to make a little vein in my frontal lobe go pop pretty soon.

I have an early 2009 2,66gHz Mac Pro. 7GB Ram.
At some point it got incredibly unstable running 10.6.4 (and earlier SL versions).
I've tried running it with stock RAM. Same issue. Tried clean re-installing. Same issue.
I post this here because I have the exact same system running on an iMac (cloned) - and it works fine with all my firewire drives so this must only affect certain (older?) machines.
I have read a lot of the "general instability" threads concerning SL and they seem all to have issues as diverse as mine; basically this is what happens for me:
I boot the machine and it works fine until a certain *key event* makes everything wonky. At this point, all these seemingly random issues pop up.
Such as, but not limited to:
The finder will crash and then give that darned "could not be relaunched -10601" error.
Most things to do with saving/exporting will fail and crash the corresponding app.
Toast will not launch.
AFP Server becomes unresponsive, as does screen sharing.
Opera will crash.
Disk Utility will crash on launch.
iTunes will crash, then fail to relaunch "checking library" then beachball.
I have tried to identify this *key event* because it might help the apple engineers get this fixed.
It seems sometimes to be something to do with Quicktime-based operations. Clicking around in Disk utility is also a good way of making it hang. It never happens spontaneously without user input. There is always something I click, that starts the whole thing off, although the trigger is generally very diverse. A friend of mine has the same issue, and he says he can always trigger it by re-scanning AU units (?) in Logic.
Once you have reached "Firewire ****" the machine needs to be hard-reset. A reboot gets as far as the blue screen with the spinning wheel. I don't know if it goes on spinning forever because I don't have forever to wait, but it does not reboot within 20min. If there are no firewire drives attached, none of this ever happens. I have a 2TB DualDrive FW800 WD and a 2TB Lacie which is also FW800.
Now I'm trying to identify which one of the two FW drives is responsible, and I will post back with results. I shall also try FW400. They are both brand new drives by the way.
I swear this is going to make a little vein in my frontal lobe go pop pretty soon.

Cd/dvd drive not found, can I format hard drive with an external cd/dvd drive. If so how?

My cd/dvd drive quit working and is not found in device manager so I purchased an external cd/dvd rw. Now I am having other issues with installing software and windows updates so I would like to format hard drive. Can this be done with external cd drive, if so how do I boot from it? presario v6000 laptop windows vista 32bit os.

Restart the notebook >> start tapping F10 key >> go to configuration menu >> Boot Order >> select the Ext DVD drive as 1st boot device >> save and exit >> Insert the recovery disc >> restart the PC >> press any key when prompted >> follow the instructions..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Installing xp with an external dvd cd drive

My intel imac internal cd drive has stopped working and is too expensive to repair. I have just purchased an lg gp08 external drive to replace it.
I have OSX 10.5.6, I have successfully used Boot Camp Assistant to create a boot camp partition. When Boot Camp Assistant asks me to insert the Windows XP Installer disc, I do so, and then the then click continue where my computer restarts. I know this is where I should be restarting in my BootCamp partition and XP should start installing. However, the first time I tried, the computer just sat at the beginning screen with the gray background and the apple logo in the middle of the screen for about 15 minutes. I turned the computer off and when I restarted, the Apple logo started alternating between a question mark, a file folder, a circle with a line through it (like the no smoking sign without the cigarette in it) and the apple. I know this means the computer is looking for a hard drive. I pressed the alt/option button which did nothing, so I restarted again and pressed the alt/control button and was allowed to select the Mac HD, but it does not show any other HD that I can select. When I am back in Leopard, I can still see the partitioned hard drive, but I can not get the computer to restart and begin the installation of XP. I have read in several places that Boot Camp Assistant should ask me what HD to install Windows on, but I have never seen that screen, it just restarts the computer immediately when I press continue. I have also tried to do with while pressing 'C' to force the computer to read the external CD drive, but that gives the same result. Is this a problem with me using an external CD drive instead of my internal one?
If I restart the machine with osx install disc in the cd drive it is selectable on the grey screen.
Any solutions would be welcome.
Thanks in advance
John

I too have a post pending on this problem since 4 days and no reply/help from anyone. I believe XP cannot be installed from an external drive unless you change the boot order in the BIOS, which doesn't help us Mac users.
I cleaned my internal drive with a cd lens cleaning disk and now it recognizes some disks, although not the xp install disk. But you could give it a shot, it may work for you if it's just a dirty lens.

Large file problems with an external FAT32 formatted drive (solutions???)

I have an external hard drive that was from my PC and formatted as NTFS so it was read only on my Mac. I formatted it to FAT32 so that I could read/write to it from both my Mac and PC.
Now, because it is formatted FAT32, I can only have a 4GB max file which has proved to be a pain to me. Is there not a format that satisfies both platform with unrestricted file sizes?
Thanks in advance.

Well, the answer is: not easily.
NTFS, EXT2, and Mac HFS can all be read and written by Windows, Mac OS X and Linux, with appropriate software. You should probably settle on what you are going to use most, and use that as your preferred filesystem.
For example, if you were going to use the Mac mostly to deal with the disk, format the disk using HFS+. On Windows, buy MacDrive and install it to read/write the Mac-format disk. If you are going to use Windows most of the time, then install MacFUSE and NTFS-3g on your Mac (http://code.google.com/p/macfuse/). et cetera.
There's nothing in the way of a really good cross-platform filesystem. ZFS may eventually become that (one might hope), but that's still not quite there.

Installing Tiger (dvd) with sony external firewire DVD drive

Helo all,
Can anyone tell me if the B/W G3 can boot up an OS X CD from an external firewire or USB DVD Room.
I want to upgrade my machine to Tiger but not having any luck with getting it to recognize the external DVD Rom on boot up.
It recognizes it with no problem once the OS is installed and logged into a user profile but the entire time during boot up I can't get it to boot from the drive.
I have tried the following key combinations (Don't know if they are supposed to work with the B/W G3):
T - Firewire Target Mode
Command-Option-Shift-Delete - Bypass internal harddrive on boot
System Prefs > Startup Disk > Select DVD Room > Restart
Is there anything else I can try other then trying to find an IDE internal hard drive to plug into this machine?

B&Ws can not boot from Firewire drives.
Most Pioneer drives are bootable if installed internally. Certain other brands are also bootable (internally).
This page has Mac user reviews of different DVD drives in various Mac models.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

IMac 27" with Thunderbolt Display connected, Boot Camp Problem

Hi everyone.
Let me start off by saying that I'm using a late 2012 iMac 27", 3.4 GHz i7, 680MX, 32 GB RAM, 1 TB Fusion, with a Thunderbolt Display connected.
I installed Windows 8 via Boot Camp, and it works just fine. Here comes my problem:
I have dual screens and I play Minecraft. Minecraft's full screen is basically crap, and therefore I disabled the iMac display. I used Windows-button+P to use only the secondary display. This turns the iMac display off entirely, and leaves the Thunderbolt Display on. Note: This is not possible in Mac OS X. Then I played a little Minecraft. When I was done, i wanted the main iMac display to come on again. I then used Windows-button+P again, to turn both displays on. Then bam, totally looked like the iMac display was broken. See the images below, to see how it looks:
1) http://cl.ly/image/1p2e3c1Z1z1C
2) http://cl.ly/image/2g0n1M1Y0t0g
3) http://cl.ly/image/2Q2P1c1J220d
4) http://cl.ly/image/113b3K2O1Z43
5) http://cl.ly/image/1q2v1s1n3w1f
This image-retention-like stuff stays there, even if I reboot into Mac OS X, and then it eventually disappears. I can reproduce this, by doing the same thing again, (windows-button+p) but only in Windows, because that you cannot turn of the main display in Mac OS X. Maybe this is the reason why you can't?
Anyone can tell me what I can do? I guess I could try reinstalling, but it seems more like a hardware issue, than a software issue.
Thank you for your time, and thanks in advance.
Another note: I'll try doing the opposite, and see if it happens on the Thunderbolt Display as well. (Windows-button+P, and then only using the main display)
//ifraaank

Ok, I am marking this as "answered", as I have solved it myself, while I still have no clue what lead to the problem in the first place.
I've been on the phone with Apple Care today, and they were as clueless as I was and had never heard of this before.
After we tried the usual stuff (unplugging all wires, PRAM Reset, SMC Reset), to no avail, I was told it could well be a hardware problem and that I should have the iMac examined at the Genius Bar, so an appointment was made.
I'll cancel that one though, as I was able to cure it by myself for now (and carrying around a 27" iMac in Munich's busy downtown pedestrian zone is not really fun).
This is what I did (and I'm so happy I tried):
In Display Settings, I switched the external display back to landscape mode and selected "mirror displays".
Then I rebooted, and voilà, the problem was gone (Apple logo on white background was showing).
I switched it back to 90 degrees rotation and no mirroring, and it's still all ok.
I booted Windows 7 in Bootcamp, then back to Snow Leopard, and it's all still fine.
I can still only wonder what messed this up in the first place, but for now I'm happy.

Using Airport Time Capsule with an external usb hard drive - how to connect

I have 2TB Airport Time capsule which is connected to my iMac by an ethernet cable and which I use for T.Machine backups - No problems here.
I have an old MacBook Pro running 10.6.8 and which is also connected to my T/C via wi-fi - again no problems.
But I understand I can use an external hard drive via usb cable connected via a powered hub, to the T/Capsule and which I wish to do certain backups from my MBP (I have no wish to update the MBP as it runs certain apps no longer available on the iMac (10.9.2)
Now the problem I have is trying to set it up, the MBP has Airport Utility 5.6.1 and I can’t continue as it says I need a newer version. As I see it, the newer version doesn’t work on the MBP only the iMac.
A catch 22 situation. If I continue and and go to “manual setup” then try update, all I get is “correct the problem before updating” (Allow setup over the internet using Bonjour).
Anyone have any ideas or images that I can view to try and get things going?
I should add that I wish to use my external hard drive not as a time machine backup but only for certain items using say, Super Duper, but am unable to get the disk to mount on the MBP
Alan

I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
You are first mounting the drive on the desktop, correct?
Not sure what you mean here.
You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
Or, double click the drive icon on the desktop and drag/drop files into the open window there.
Tell us the steps that you are using to mount the drive on the desktop. What happens after each step?

Is the latest iMac compatible with external raid 1 drive setups?

I'm considering different new Mac options to replace my first gen Mac Pro. The new and most outfitted iMac seems like a good solution for my mostly Photoshop work. But, is the new iMac compaticle with Thunderbolt external RAID multi drive enclosures?

Sure, why not contact OWC (www.macsales.com) where they sell RAID solutions for Macs. Because they specialize in Macs they test every product they sell.

MBP retina with an external boot drive

What does one have to do to boot the MBP retina from an external drive ?
A bootable partition on a G drive using USB 2 mounts but will not boot the MBP retina. Works fine with the air from last fall. Basically I'm trying to run DiskWarrior.
What about the Buffalo drive with Thunderbolt - will that boot the MBP retina ?
Thanks for any suggestions !

I am having the same problem, more or less. But even after reformatting the old systems disk that had LIon on it with a fresh copy of Mavericks it it still refused to mount.
Hi, I have a rather interesting problem in that I'm trying to get osx 7.5 to boot in diskboot mode from a promise pegasus2 drive.
Theoritically the new format should mount but wont. If there are drivers that the new MBP must reconize to mount lion then it must also apply to files that controll how the disk that Lion is installed on as well.
If someone as an answer to this I would very much appreciate your assistance.
thanks.

24" iMac freezing occasionally/Please Help

24" iMac freezing occasionally without allowing force quit. Sometimes when I attempt to restart it, when the computer comes back on it will freeze on a gray screen with a folder in the middle with a question mark on it. If I unplug all peripherals and the iMac power cord and let it sit for a while, it starts working again Sometimes I might get 4 days of use before it happens again. Then sometimes it might happen 2 or 3 times in a day. I've always heard the gray screen with foler with question mark was the mark of death for the hard drive. If this information is true, how am I able to get it to work occasionally with no porblems?
Thanks,
34firefighter

I found out what was happening... I was running screen dimming software called 'Shades' which was messing up the colour profile allocation. I stopped this software running and I was able to recalibrate! I'm so pleased as I thought there was something wrong with my graphics card!

OS X 10.8.3 freezes occasionally with Thunderbolt external LaCie boot drive

Similar Messages

Maybe you are looking for