OS X (10.8.3) Mission Control not working properly.

On my 13" MacBook Pro running 10.8.3; Mission Contol no longer funcitons properly.
Three finger swipe up: only intermitently shows thumbnails of running applications. Never shows a thumbnail or Safari.
     Most of the time, however, I am presented with application icons instead of thumnails. Again, a Safari window thumbnail or icon fails to show up.
Three finger swipe down: functions properly.
Is there a way to reset Mission Control?
Is this an issue others are experiencing?

Thanks for replying so quickly pal, but I actually seemed to have solved my own problem.
For anyone who has been having the same issue that I did, follow these steps:
1) go to your 'contacts' app and remove your email address from your own 'card'
(not sure if this is necessary) 2) remove apple id from user & preference profile
Cheers

Similar Messages

  • Phone Controls Not Working Properly In my Lumia 930

    Dear Sir,
    I'm Using a Nokia Lumia 930 phone, just purchased a month ago. for the first time i on my phone, there were few o/s updates appeared and i made a update. when I plug my headphone to the phone, controls are not functioning properly. the button in the headphone
    not working and sometimes it works but i tried with other Lumia device with my headphone, it's working perfectly. Please give me a solution.
    Thanks

    For help using Windows Phone please post on the Windows Phone forums on
    http://answers.microsoft.com .
    The Tools for Windows Phone development forum is for developers to discuss writing their own Windows Phone apps.

  • Play/Pause controls not working properly after IOS 8

    I like streaming content off of a website I visit in safari.  Before the update, I was able to play/pause the content from the lockscreen, I was also able to do it using my apple earpods.  Now this feature doesn't want to work properly.  It will work when I start listening, but if I let it play or stay paused for more than a minute, the controls stop working.  If I press pause in the lock screen, nothing will happen.  However, when I Slide-To-Open, the audio will start playing  (or pausing) like I intended.

    Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly.  I purchased a Jawbone MiniJambox to use as a speaker phone in my office.  Everyone in our company thinks they are the best.  However, it is experiencing the same issues as with all my other Bluetooth headsets.  Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices.  The Bluetooth patio speakers in our courtyard also have the same issue.  However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues.  Apple says it is a problem with my Bluetooth device.  Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers.  You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
    On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB.  The vehicle entertainment center had complete control of my iPhone and iTunes.  However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center.  Again when I called Apple, they said my vehicle entertainment center needed a firmware update.  Are you kidding me...  That is a bunch of BS...!!!

  • Iphone 4 Voice Control not working Properly after iCloud Contacts sync

    Hi All,
    I am facing a strange problem. Recently I enabled iCloud settings to sync contacts from my iPhone to iCloud.
    It asked me that do I want to merge the contacts from iCloud onto this iPhone. Obviously I clicked yes.
    What it did was actually not sync all but around 1/3 of my contact list and erasing the remaining. The other 2/3 of my contact list wasn't on both iCloud or iPhone.
    So I decided to restore my iPhone from the backup i took just before enabling iCloud. But I forgot to switch off the iCloud settings for not syncing Contacts.
    Although I recovered all my contacts from the backup, my voice control has stopped recognizing my remaining 2/3 of the contact list that did not actually sync.
    It can recognize all the contacts that were synced with iCloud, but not the ones that got erased.
    After backup restore, iCloud settings was switched to off state and I did not dare enabling it back on.
    Has anyone observed this behaviour? I just cannot seem to get the voice control recognize the remaining 2/3 contacts at all. I tried renaming the contact that it recognized to some other name and it still does not recognize the new ones.
    Please help me find out the reason for this  and how can i fix it?

    I'm getting this too. It's very slow and apparently thinks "Call Sue Newport" sounds like "Call Halfords" or "Call Halyards" and, most surprisingly "Call First Great Western".
    I was wearing my Jawbone Bluetooth headset so it's nothing to do with background noise.
    I tried the new "What time is it?" command which works but takes about 10-15 seconds to activate.

  • IPhone-4 Voice Control not working properly

    I'm facing trouble with the iphone-4 voice control. Its not correctly recognizing my voice commands. When I ask it to call a specific phone number it never dials the correct number, I have notice that it happens for some specific numbers when asked to dial. Also , songs are also sometime not correctly recognized and a wrong songs/album starts playing. But, when I tried same phone numbers or songs playing command on a Google Powered android phone..it recognizes all voice commands correctly and works perfectly fine. I think apple needs to fix this issue..right now the voice control ***** big time

    I'm getting this too. It's very slow and apparently thinks "Call Sue Newport" sounds like "Call Halfords" or "Call Halyards" and, most surprisingly "Call First Great Western".
    I was wearing my Jawbone Bluetooth headset so it's nothing to do with background noise.
    I tried the new "What time is it?" command which works but takes about 10-15 seconds to activate.

  • Video playback controls not working properly

    video
    I put a video into edge and it works but the player controls don't show up when you roll over any part of the movie they only show up if you roll over a specific area at the bottom of the video, A very small area. I want them to be there either always or when the user rolls over any part of the video. I attached a link of the video.

    I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
    Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
    Here is the skin I have used for that in the Captivate editor.
    The best way to test these outputs is from a webserver or SCORM Cloud.
    Sreekanth

  • HT4689 Can we make mission control not stack the windows of the same app?

    I often have multiple Word windows open and it's very hard to find the one I need when they are stacked in Mission Control. I like the fact that with a four-finger swipe you can see all the open programs, but it's not quite useful if apps are stacked (so I can't find which is which), and minimized apps apps are not shown.
    In comparison, MS Windows makes it easier to locate an open program although less fancy-looking.

    Hi keclear,
    If you would prefer that Mission Control not stack the open windows for each application, you may want to turn off the "Group windows by application" setting. You may find the following article helpful:
    OS X Mountain Lion: Mission Control preferences
    http://support.apple.com/kb/PH10850
    Cheers,
    - Brenden

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
    So consider using IE as workaround.
    Also please refer:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
    Workaround here:
    http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
    -Vaibhav Chaudhari

  • JDBC control not work after upgrade application from workshop 8.1 to 9.2.3

    Hi,
    We upgraded application from workshop 8.1 to 9.2.3. After that, the JDBC control not work any more. We got the following exception:
    java.sql.SQLException: The transaction is no longer active - status: 'Committed'. No further JDBC access is allowed within this transaction.
    at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:192)
    at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:202)
    at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:87)
    at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:435)
    at org.apache.beehive.controls.system.jdbc.parser.SqlStatement.createPreparedStatement(SqlStatement.java:128)
    at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:272)
    at com.bea.wlw.runtime.core.control.internal.JdbcControlImpl.invoke(JdbcControlImpl.java:136)
    at controls.SecurityBean.getUpdateDocPermission(SecurityBean.java:598)
    at security.SecurityManagerImpl.getUpdateDocPermission(SecurityManagerImpl.java:110)
    at security.SecurityManagerBean.getUpdateDocPermission(SecurityManagerBean.java:509)
    The control that throw the exception has "transactionattribute" annotation added automatically by upgrade wizard during upgrading. Related classed are as follows:
    @ControlInterface()
    public interface SecurityManager
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    boolean getUpdateDocPermission(java.lang.String userId);
    @ControlImplementation()
    public class SecurityManagerImpl implements SecurityManager, Serializable
    * @common:control
    @org.apache.beehive.controls.api.bean.Control()
    private controls.Security security;
    static final long serialVersionUID = 1L;
    * @common:operation
    public boolean getUpdateDocPermission(String userId)
    if ( security.getUpdateDocPermission(userId) > 0) {
    return true;
    else
    return false;
    @ControlExtension()
    @JdbcControl.ConnectionDataSource(jndiName = "EventDesk")
    public interface Security extends JdbcControl
    static final long serialVersionUID = 1L;
    * @jc:sql statement="select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;"
    @JdbcControl.SQL(statement = "select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;")
    int getUpdateDocPermission(String userId);
    Thanks for your help

    Hi. The issue is a level or two above JDBC. I suggest
    opening an official support case. It's probably a
    WLW issue.
    Joe

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Sound control not working on my blue tooth keyboard

    sound control not working with my bluetooth keyboard

        UAVPilot,
    Thank you for the information. I do show that the device and car are capable of this function. I do not show any reason you should not be hearing the notifications. One thing you will want to check is that the sound for both your notifications and media are turned up. Also you can look into going into Settings>Apps>S voice Drive Mode> Clear Cache. This should clear any possible bugs in the application. Please keep us updated on this and we can check on other options.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport

  • Lower volume button control not working help?

    Lower volume button control not working help?

    If you only restored from backup, restore to factory defaults/new iPod.  If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Beats audio controls not working

    Using my beats headphones this morning with my MacBook Air and iTunes.  Everything is up to date.  Although today now the audio controls on the cord won't work.  Normally I can pause iTunes or control the volume.  I do this multiple times a day but no go today.
    Is this another 10.10.2 bug?  Illustrator 2014 CC no longer works properly with my external monitor.  I'm getting frustrated with all these bugs.
    Also, in my 'About This Mac' info window, it shows my OS as "135122" instead of "Mac OS X" - I'm sure that's not normal.
    Any thoughts, anyone?

    I did a reboot and repaired permissions, which solved the beats headphones controls not working.
    Still concerned about the Mac OS version display though.  Curious to know if anyone else has that as well.

  • 10g db control not working

    Hi
    In 10g database my db control not working.i m also recreate it but same result using these commands.
    emca -repos create
    emca -config dbcontrol db
    Thanks

    so what is returning this: `emctl status dbconsole` ?
    if it tells that DB Control is running so what you've got when You are trying tu run db console (http://host:port/em/ ) ?
    if it's not runnig type 'emctl START dbconsole' and try again
    anyway, if something doesn't work that there have to be some errors :)
    when you will not get any errors from above look for them here:
    $ORACLE_HOME/HostName_InstanceName/sysman/log

Maybe you are looking for