OS X and classic creator and type codes

Is there anyway, within the native os to change type and creator codes?
Why would I want to? Here's an example:
I get a .zip from a customer. Because I have Stuffit installed it takes ownership of the archive. That would be fine except I've noticed different results using stuffit vs. BomaArchive helper. As in they don't unzip with the same amount of files.
I used to use Super Get info to change them, but that's not a possiblity now. And if Apple didn't hide Boma so deep in the OS I might be able to just make an alias and drop them on it. Won't find on a search for "Boma", both visible and invisible.
Thanks for any help. I'm just trying to find another way to make my OS do what I want it to, not what some app develper or OS creator deems should happen.
Remember... think different?

You can easily change any document's default application by selecting the document icon, press COMMAND-I to open the Get Info window. In the section labeled Open With select the desired default app from the drop down menu. If you want all similar documents opened by the default app, then click on the Change All button.
Alternatively download the freeware preference pane RCDefaultApp from www.versiontracker.com.
BTW, not pointing a finger at you, but keep in mind that even morons "think different."
Thanks for your ideas, and more, thanks for the jab at the slogan Apple used to use to differentiate itself, and it's consumers from other, less user friendly OS's.
But your solution doesn't help me. I'm well aware of changing the assigned app through the get info window, and that there are other utilities as, if not more adept at this function. My problem is that, if I have to solve my problem this way, instead of gaining knowledge about what effect type and creator codes have in OS X and how to change and deal with them, I find it hard to impossible to track down the location of the app BomaArchiveHelper. It never appears in the "Open with" pop up, and therefore I need to know the location in order to navigate to it to tell OS X to use it. And being that I see different results when unzipping depending on which app was used to create the zip, I don't want to set it as default.
So, my questions stand.
How do you view and alter type and creator codes in OS X, and where exactly is BomaArchiveHelper located.
G4 MDD Dual 1.25 Mac OS X (10.3.9)

Similar Messages

AS I FOUND OUT LATE, LION DOES NOT SUPPORT ROSETTA, WHICH SUPPORTS QUICKEN AND CLASSIC AOL, AND MANY OTHER APPS. CAN I TAKE LION AWAY AND GO BACK TO SNOW LEOPARD?

I found out after the install of LION, that it does not support Rosetta, which runs Quicken and the classic AOL software and a myriad of other apps.
Can I go back to Snow Leopard? Is there a way to retrieve my thousands of saved E mails, which are saved on my Mac?
I still see the filing cabinet with my screen name but cannot get them to open.
Please help! Lion may roar, but the fact it does not support apps like quicken means it purrs.

I had the Apple store wiped out my hard drive and I restore my last hard drive downloard by first placing Snow leopard DVD in the DVD drive and holding "C" when turning on the machine then I follow the instructions. I am back on snow leopard and trying out two finance software to replace Quicken for mac 2007. I am trialing Quicken essentials and ibank. They are both compatable with LION. So when I am ready will download Lion again. Also, Micorsoft Office needs to be 2011 version for it to work on Lion

Stumbling Through Classic "Type," "Creator," and General File Confusion

I have been searching the Internet trying to make sense of some Classic nonsensical (to me) inconsistencies between the information in the Get Info panels for the files and the "Type" and "Creator" headings as shown in HexEdit. One of the articles I read online was this one:
http://arstechnica.com/reviews/2q00/macos-qna/macos-x-qa-2.html
After reading that I sort of understand that the Finder is supposed to assign apps to documents based by using a sort of logical process. But here is the problem, which exists throughout the System Folder/Extensions Folder and elswhere such as the System Folder/Preferences folder:
I'll use just one example. "Apple Packet Media Access" is an Extension. "Get Info" says it is an "Internet Document," to be opened by the "Internet" application. But if I open it in HexEdit, the header of the HexEdit document lists the "Type" as "thng," and the creator as "ufox." The text portion of HexEdit also says that "The Apple Packet Media Access extension is required for mounting Packet-Written data CDs on your computer." Clearly this has nothing to do with the "Internet" app, and therefore the Get Info box is wrong. This is just one example of many extensions (and other files in the System Folder) that are incorrectly associated with an application.
My problem is that in order to "cure" this problem by selecting "other" in the "Open With" dialog box, I have to select an application. And what application should I select to open "Apple Packet Media Access?" OR, is this not a document at all, but rather an application?
How is an ignorant user like myself to determine which is the correct app to open a document which is clearly associated with an incorrect app?
Or should I even care? I wouldn't care, except for other problems I am having between Classic and older programs.

At times, since the transition from OS 9.2.2 to OS X 10.0 ~ 10.5 versions I have
looked into the OS 9 system (in non-dual-boot iMac running Tiger 10.4.11) and
have managed to get more information than via OS X 'get info' and had done
this by having more than just the OS9 app open in Classic, under OS X control.
There is a way (but do not have the time to delve back into retracing my steps)
to use more of OS 9.2 even in Classic, where you can't really use OS 9 Finder.
And it is the OS 9 Finder that actually gave you access to most OS 9's goods.
OS X does not have anything quite like the Finder as arrived at by OS 9.1.
And when you need to have certain things working in OS 9, it is better to try
and have all those items of the same era; as limited as it can be compared
to the fully functional OS X system, or the Classic9 running under OS X.
The applications for OS 9 that can be seen as Classic compatible say Classic
in the Get Info window of X; some will work anyway but not fully supported.
For the real deal, in other instances on these discussions, it has been suggested
to get an older Mac running native OS 9.2.2 and have that separate from OS X.
As I had mentioned before, the OS X ability to say what an OS 9 part may run
with is only referenced from the point of view of OS X; it may string together a
path to run something or another using Classic to control OS 9 System + Apps.
But that is a far cry from the actual meal deal of OS 9.2.2 seeing its own content.
There are groups of OS 9.2.2 & Before users out there and perhaps you should
contact them for more information on gaining further insight into Classic controls.
{With Classic9 running under OS X, often with extensions off or very reduced,
any reference to what resources are being used would be clouded by a real
lack of content; so OS X would be having to do a backward compatible duty.}
PS: I have a nice and clean iMac G4 17" 800MHz dual-boot computer with
SuperDrive, 1024MB RAM, airport card, 80GB HDD; incl. speakers, mouse
keyboard, power cord and OS X 10.4. Too bad you aren't closer to here...!
Good luck & happy computing!

SRM7 classic scenario - backend PO creator and item requisitioner

Hi all,
In our current SRM4 with backend ECC 6.0 EhP4, the backend system was defined as ERP_2.0. After shopping cart get approval and PO generated at backend, both the PO creator and item requisitioner are equal to shopping cart creator.
We are upgrading to SRM7 and exploring the service procurement scenario (transfer service hierarchy) between SRM7 and backend ECC 6.0 EhP4. After we defined backend system as ERP_4.0 (LOG_MM_P2PSE_1 activated EhP 4) and setup PI, the PO was successfully created at backend via XML message. However, we noticed that the PO creator and item requisitioner were WF-BATCH but not the shopping cart creator.   Is there any setup that can resume both the PO creator and item requisitioner equal to shopping cart creator?
We also tested in SRM7 to define backend system as R/3_4.6C (does not require PI), then the backend PO creator and item requisitioner are equal to shopping cart creator.
Regards,
Donald

Hi Donald
988490
- CHECK CODE CORRECTION
IF NOT ls_partner-requestor IS INITIAL.
      mc_assign_x ls_be_item preq_name ls_partner-requestor.
    ELSE.
      mc_assign_x ls_be_item preq_name sy-uname.
    ENDIF.
Note 761630 - WF-Batch in change documents
Reason and Prerequisites
There are processes in which changes to the document are implemented in the background task in the background (for example, by the workflow). In this case, the system user WF-BATCH is displayed in the document as the last 'Changed by'.
Solution
This is not a general error because the change history correctly displays changes made by the workfow, for example.
In some cases, it would make sense, from a business point of view, that the change history does not display the WF Batch but the user who triggered the workflow/background process (example: approval of a shopping cart by a manager). Due to the complexity of this development, which involves adjustments of all workflows and background processes, no solution can be provided in Releases SRM 4.0 and SRM 5.0. An advance correction is only possible for the special case when shopping carts are released (see Note 761293).
by the way what are your rfc user names?
Check with SAP.
mUTHU

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?

On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?
I will attach a recent screen shot of a print window I opened and the extra code is above and below the window. There are matrix type blocks of code and then lines under the window. I get this all the time and it is getting worse.
Any help to get rid of it would be appreciated.
Thanks
TatteredSkull

It's likely the Video card, or possibly heat.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.

How can I pass a file refnum into and out of external c++ code? What type does it convert to in c++?

I am trying to write external c++ code that will read a file already opened by Labview and therefore assigned a refnum. (Unfortunately, I definately can't use the standard Labview vis.) However I am not sure what c++ type to use in order to manage the refnum.
All help and thoughts appreciated. Thanks,
Joanna

You could do ALL your file handling in C or C++ (MFC CFile for
example) and pass Microsoft file handles into and out of LabVIEW
instead of LabVIEW file references into and out of C. This may be an
easier way to attack the problem.
You could create a DLL in MSVC that exports a FileOpen function, a
FileClose function and a FileRead and/or FileWrite Function and then
call that DLL from place to place as required in your code.
It would help us if you would explain what kind of data you are trying
to read or write and what the application is. Is it binary data?
text files? Do you need some special Win32 file system feature like
file mapped memory? I guess what I am asking is what is your
motivation for doing file handling in C or C++?
Douglas De Clue
LabVIEW developer
[email protected]
"Rolf" wrote in message news:...
> A LabVIEW file refnum is an internal Magic Cookie to LabVIEW and there is no
> way to directly extract the actual information assigned to that Magic
> Cookie.
> However the CIN Reference Manual describes one function which allows to
> retrieve a lower level "File" handle and at least on Windows 32 bit and
> LabVIEW
> from version 5 up to and including 6.1 this "File" LabVIEW datatype directly
> maps
> to the Win32 API "FILE" Handle.
>
> The function to use is
>
> MgErr FRefNumToFD(LVRefNum refNum, File *fdp);
>
> It is declared in extcode.h or one of its dependant headers and exported
> from "labview.lib"
> all located in the cintools directory and you can link this lib also to a
> normal DLL project.
> However calling this DLL then from any other process than LabVIEW or a
> LabVIEW
> executable will not initialize the DLL anymore correctly.
>
> Your best option if you need to write in C(++) should be to use the LabVIEW
> file manager
> functions described on the External Code Manual (manual/lvexcode.pdf) on
> this File handle.
> If you need to use directly some Win32 API functions with it please note
> that although currently
> the "File" in the LabVIEW file manager functions matches the FILE in Windows
> 32 bit API
> functions this is an undocumented and hence unsupported feature. The next
> LabVIEW version
> may actually use a different datatype for its "File" parameter to the
> LabVIEW file manager calls
> and your use of assuming File == FILE may simply crash.
>
> Also operating on a file refnum in LabVIEW which has been accessed directly
> with Win API
> functions may result in strange behaviour such as the file read/write mark
> not being updated as
> you would maybe expect it.
>
> "Jo" wrote in message
> news:50650000000800000016520000-1023576873000@exchange.ni.com...
> > How can I pass a file refnum into and out of external c++ code? What
> > type does it convert to in c++?
> >
> > I am trying to write external c++ code that will read a file already
> > opened by Labview and therefore assigned a refnum. (Unfortunately, I
> > definately can't use the standard Labview vis.) However I am not sure
> > what c++ type to use in order to manage the refnum.
> > All help and thoughts appreciated. Thanks,
> > Joanna

I changed the passlock screen somehow and now it's grey and boring when I type my code in how do I get the colours back?

I changed the passlock screen somehow and now it's grey and boring when I type my code in how do I get the colours back?

You're welcome.
Be aware, eye candy ***** more battery.

Hi my phone is disabled and asking me to conect to itunes but when i conect to itunes it says can not conect as u have to type code first on ipone ....help pls

hi my phone is disabled and asking me to conect to itunes but when i conect to itunes it says can not conect as u have to type code first on ipone ....help pls

If the phone is actually working you can reset it fron the handset, but yours does not appear to be working. Be sure you are using a good cable and the cable is connected directly to a USB port on the computer (not a hub). Follow the instructions carefully in that link; the computer will not recognize the phone until it is in Recovery mode, and it's complicated to get it there. If you have followed the instructions exactly and it still is not recognized in iTunes. try removing and reinstalling iTunes: http://support.apple.com/kb/HT1925. If that still fails try a different computer, and also try restoring from DFU mode (Google is your friend).

How to create recipient type and communication route for T code S023

Hi Can any body help me create new recipient type and communication route in T code S023,
Quick responce is greatly appreciated.
Cheers
Rajeev

You can just right click on the distribution List. Click on Change button. From here you can click on the respective Recipient Type and populate the Distribution list.
Thanks
Arghadip

I have recently baught a iTunes gift card and I try to type in the code and it says it's invalid and I don't know what to do

I have recently baught a iTunes gift card and I try to type in the code and it says it's invalid and I don't know what to do? Could anyone help?

No one here can help you. Contact iTunes support:
http://www.apple.com/support/itunes/

Classic wht and extended wht

hi,
may i know what is the difference between classic wht and extended wht? can advise what is the major difference between these two?
thanks

Hi,
Classic WHT- In some countries, the law provides that invoice recipients must withhold a certain portion of the payment amount and pay this to the tax authorities as withholding tax on behalf of the vendor. This requirement exists in the United Kingdom, for example. In other countries, withholding tax need only be reported to the tax authorities for certain vendors, such as self-employed people. Withholding tax is not posted in these countries. This is the case in France, for example.
Withholding tax amounts are reported to the tax authorities at regular intervals and a statement is also sent to the vendor periodically. These reporting periods vary from country to country.
The way in which withholding tax is calculated depends on the type of service. Transactions may:
Have a variable base for tax/SI contributions
Have different tax rates
Not relevant for withholding tax
EWHT-With extended withholding tax, you can process withholding tax from both the vendor and customer view.
In Accounts Payable, the vendor is the person subject to tax, and the company code is obligated to deduct withholding tax and pay this over to the tax authorities on the vendoru2019s behalf. In Accounts Receivable, the company code itself is subject to tax, and the customers that do business with this company code deduct withholding tax and pay this over to the tax authorities on the company codeu2019s behalf. In both cases, the business partner of the person/entity subject to tax deducts the tax and pays it over to the tax authorities.
Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount.
In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
Extended withholding tax supports both concepts.
The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate - are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type. When entering a line item, you can enter withholding tax data for each of these withholding tax types.
For more information about the functions of extended withholding tax (in comparison to classic withholding tax), see Withholding Tax
The following special features also exist:
In some countries, such as Argentina and Italy, other kinds of posting are required for certain business transactions. Instead of the payment amount being reduced by the withholding tax amount, the withholding tax is posted as an offsetting entry to an expense account You make the relevant settings in the withholding tax code.
Where cleared items are reset, the clearing document is automatically reversed if it contains withholding tax data. For withholding tax types with accumulation, the accumulation base amount is adjusted if the payment document is reversed.
Hope this helps.
Rgds
Manish

Using PMW(Payment medium work bench) and Classic payment medium programs

Hi
Can you please anyone explain the difference between PMW(Payment medium work bench) and Classic payment medium programs in the APP.
Please let me know based on what cosideration these can be used?
Thanks
Rajesh

The consideration is nothing, it is purely based on the business requirement.
Following information may be useful.
SAP has provided some of the DME structures for different countries. like GB_BACS for GB etc.
If your client is not part of those structure, probably you are required to create your own structure. It also depends on the bank of your client. They may want the file in a different format. Therefore, you need to first talk to the bank and get a sample file in which they need the format.
You can create the DME structure by using transaction code DMEE - Tree Type is PAYM.
You can create the DME structure as a flat file or XML file based on the requirement of your client (bank).
You can also copy the standard structure to Z structure and modify it according to your requirements.
Please also make sure that you have made settings in OBPM1, OBPM2, OBPM3 and OBPM4 (More importantly you should maintain the path where it needs to be downloaded)
Complete your FBZP settings - Importantly payment methods in country, select your DME structure.
Take help of basis consultant in order to create the directories. You can see the directories in AL11.
If there are no directory path maintained in OBPM4, then the file gets saved to temporary directory in AL11.
If you are using DME structure, then forget the classic payment medium.
1. First ask the bank for the format, file type etc. Ask bank for any document available.
2. The see for that country if SAP has provided any standard DME structure (Transaction Code DMEE - Tree Type PAYM)
3. If this is not sufficient, then copy the standard DME strcutre and modify it accordingly to your requirement.
4. Assign this DME structure in FBZP - Payment Methods in country. * Use payment medium workbench
5. Check with your basis whether any secured folders are created in AL11 (where the output file needs to get generated) - If not ask them to create.
6.Check your settings in OBPM1 / OBPM2 / OBPM3 / OBPM4 - (In OBPM4 make sure you have given the secured folder path and file name for your variant)
7. Run F110 - Check you have maintained your variant details properly for program RFFOAVIS_FPAYM
If you maintain all these steps correct, hope your DME file should get generated.
Regards,
Ravi

Posting only possible in periods 2002/03 and 2002/02 in company code 0001

All
This is in the ongoing sequence where I am creating everything from the scratch(customers, material, prices etc).So far, I have been able to create and save the salesorder>deliver it>pick the items and then I was going to carry out the PGI and then this happened.
when I use the date i.e(Planned GI) 27-09-2006, I receive the following error
****************snip********************
Goods movement: Error log
Item   Material           Description                                   Delivery qty UoM Batch
000010 9                  T-AS1_MATERIAL__9                                      10 PC
       E M7 053
       Posting only possible in periods 2002/03 and 2002/02 in company code 0001
************End snip*********************
If I use a date as R/3 wants ,say 27.02.2002(Planned GI),I get:-
"Picking date is after goods issue date"...which is obvious.
any day after 27-09-2006, say 28-09-2006(Planned GI), I get :-
"Goods issue date is later than delivery date"...makes sence too
one thing was clear here to me, I can only post in Feb/March 2002, while my delivery date is 27 Sept 2006 . So I am in a classic chicken-egg situation.
where and who is giving this "Posting only possible in periods 2002/03 and 2002/02 in company code 0001" message ? How can I override this thing from the past ?
I thought of playing it smart and change my system date to the year Feb. 2002 , but in the fear that a lot of other things will fall as a result of that, I did refrain from doing so.
Could someone make this PGI succesful for me
Thanks for any lessons.

Thanks Mr. Srinivas
MMPV was indeed the magic wand.
PGI was successful.
this is my overall document flow as of now :-
Standard Order 2                                27.09.06 Completed
. Outbound delivery 80000000                    27.09.06 Completed
.. WMS transfer order 1                         29.09.06 Completed
.. GD goods issue:delvy 4900000020              30.09.06 complete
.. Invoice 90000000                             30.09.06 Missing export data
As I understand, my invoicing is not yet complete , it's got a number and got saved, but how shall I get rid of that red line message "Missing export data"(foriegn trade data incomplete...was the message while saving the billing document).I would be darn happy if I could just get rid of the foreign data part completely(just want to complete the invoice).Would this be checking off a mandatory rqmt. somewhere in the master data?
and would this also be the reason, why I see no accounting document which should have been on status 'open' by now ?
Thanks in advance ,

How to display name of the table and the description and the table type

Hi,
Can you people tell me how to display the name of the table and the description and the table type (View, structure, etc...) used in the program.
I want to display in a list.
Kind Regards

use this program
TABLES : TSTC, tstct.
TABLES : DD03l, DD02l.
DATA : Program like sy-repid.
DATA : BEGIN OF I_FINAL OCCURS 0,
tabname LIKE dd02l-tabname,
TABCLASS LIKE dd02l-tabCLASS,
TEXT LIKE DD02T-DDTEXT,
END OF I_FINAL.
DATA : BEGIN of ITAB Occurs 0,
name like dd02l-tabname,
END OF ITAB.
DATA : TCD(100) TYPE C.
DATA : var1 LIKE dd02l-tabname.
DATA : DESC LIKE TSTCT-TTEXT.
selection-screen skip.
SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : r1 RADIOBUTTON GROUP r DEFAULT 'X'.
Parameters : Tcode like sy-tcode.
selection-screen skip.
PARAMETERS : r2 RADIOBUTTON GROUP r.
Parameters : Prog like sy-repid.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options : Type for dd02l-tabclass .
SELECTION-SCREEN END OF BLOCK B1 .
at selection-screen.
if r1 = 'X' and Tcode is initial.
message e001(00) with 'Enter Transaction Code' .
elseif r2 = 'X' and Prog is initial.
message e001(00) with 'Enter Program Name' .
endif.
START-OF-SELECTION.
if r1 = 'X'.
Prog = ' '.
select single * from TSTC where tcode = tcode.
if sy-subrc = 0.
program = TSTC-PGMNA.
select single TTEXT from tstct into desc where tcode = tcode and SPRSL = 'E'.
else.
Write :/ 'Invalid Transaction Code'.
exit.
endif.
elseif r2 = 'X'.
Tcode = ' '.
program = Prog.
endif.
CALL FUNCTION 'GET_TABLES'
EXPORTING
PROGNAME = Program
TABLES
TABLES_TAB = itab.
if itab is initial.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
ELSE.
PERFORM : categorize.
endif.
END-OF-SELECTION.
LOOP AT I_FINAL.
WRITE :/4 I_FINAL-tabname COLOR 2 INTENSIFIED OFF NO-GAP HOTSPOT ON, 35 I_FINAL-TABCLASS COLOR 2 INTENSIFIED OFF NO-GAP,
50 I_FINAL-TEXT COLOR 2 INTENSIFIED OFF NO-GAP.
ENDLOOP.
AT LINE-SELECTION.
TCD = SY-LISEL.
var1 = TCD+3(30).
set parameter id 'DTB' FIELD VAR1.
call transaction 'SE11' and skip first screen.
TOP-OF-PAGE.
WRITE :/45 'TABLE DETAILS RELATED TO THE TRANSACTION CODE' COLOR 7 .
WRITE :/2 'DATE : ' COLOR 1, SY-DATUM COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TRANSACTION CODE : ' COLOR 1, Tcode COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TCODE DESCRIPTION : ' COLOR 1, desc COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'PROGRAM NAME : ' COLOR 1, PROGRAM COLOR 1 INTENSIFIED OFF NO-GAP.
SKIP 1.
WRITE :/1(140) SY-ULINE.
WRITE :/4 'TABLE NAME' COLOR 5 INTENSIFIED OFF NO-GAP,35 'TABLE TYPE' COLOR 5 INTENSIFIED OFF NO-GAP,
55 'DESCRIPTION' COLOR 5 INTENSIFIED OFF NO-GAP.
WRITE :/1(140) SY-ULINE.
*& Form categorize
text
--> p1 text
<-- p2 text
FORM categorize .
SELECT dd02ltabname dd02ltabCLASS DD02T~DDTEXT
FROM dd02l INNER JOIN DD02T ON dd02ltabname = dd02Ttabname
INTO TABLE I_FINAL
FOR ALL ENTRIES IN itab
WHERE DD02L~TABNAME = ITAB-NAME AND TABCLASS IN TYPE AND DDLANGUAGE = 'E'.
if sy-subrc <> 0.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
endif.

OS X and classic creator and type codes

Similar Messages

Maybe you are looking for