Os x can't find windows printers

I have a mac mini running os x tiger on a wireless network with windows xp computers (via a Verizon wireless router/modem). One of the xp computers has 2 printers attached. One of the printers was set up under the previous os version (panther?), shows up on the printer list, and prints without problems. But when I try to add the 2nd printer, the printer browser doesn't see it -- when I select "choose more printers", and select the network workgroup in the window, all I see are the computers hooked up to the network, no printers. The browser also doesn't see the printer actually hooked up, either, so if I disconnected it I wouldn't be able to reconnect it. I have confirmed that both printers are on, working properly, and have sharing enabled. I would be very grateful for any suggestions.
Regards,
Jack

I'm afraid you've lost me. I'm quite sure I never had to enter an IP address of the XP computer to add a printer; you're supposed to be able to just click on the "add computer" button, and the IP browser is supposed to find it for you. And if I did enter an IP address when I set up the network, I must have gotten it right, since in every other respect the computers find each other just fine. The only problem now is apparently that since I upgraded to Tiger the IP browser no longer finds the printers (even though one is attached and works fine).

Similar Messages

I can´t find windows support files for boot camp

I can´t find windows support files for boot camp

Boot Camp Assistant
If you can't download, go to Network control panel and check your settings there, look to see if there is more than one interface listed. And turn off "Auto-proxy setting" and see if that helps, it does in half the cases.
The only thing really needed would be a small Apple Software Update for Windows program to pull the drivers down while running Windows. Just that one program, which could update itself as happen with 2.0 and 2.1 version.
As it is, downloads can take 8 hrs for a tiny 620MB package. Strange. True. Been like this.

Where can I find windows trial version for SAP NetWeaver 7.0 (2004s)

Hi
Where can I find windows trial version for SAP NetWeaver 7.0 (2004s)?, I can only see Linux version. Any help is appreciated..
- Jai

Hi Jai,
For windows, you can download "SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version" and "SAP NetWeaver 7.01 - ABAP Trial Version ". Only 7.01 trial is available for download for Windows. 7.0 trial is only available for Linux.
These are available on the same page as the ones you've seen.
Thanks,
Shitij

Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

Boot Camp Assistant 4.x in Lion
Apple Boot Camp Support

Gethostbyname can't find Windows hosts on network?

Hi,
(OS X 10.4.8 + all latest updates)
Should gethostbyname be able to resolve Windows host names?
I'm writing a command line tool that uses gethostbyname - internet hosts get resolved e.g. www.apple.com, as do local Mac hosts. But gethostbyname can't find Windows hosts. Ping and other network utilities also have the same problem, so I 'm guessing it's not just me!
I have Windows Sharing turned on, and I can mount Windows shares using the host name.
Am I expecting too much here? Or is there some configuration I'm just not setting somewhere?
Thanks for any help.
Steve
PowerMac G5 2x2.7GHz Mac OS X (10.4.8)

Yes - it's pretty easy - just have to enter a domain name and DNS server IP address in the DHCP configuration...
From page 40 of http://www.apple.com/server/pdfs/Network_Services.pdf
<pre>If you are using Mac OS X Server as your DHCP Server:
1 In Server Settings, click the Network tab, click DHCP/NetBoot, and choose Configure
DHCP/NetBoot.
2 On the Subnet tab, select the subnet on the built-in Ethernet port and click Edit.
3 In the General tab, enter the following information:
Start: 10.0.1.3
End: 10.0.1.254
Subnet Mask: 255.255.255.0
Router: 10.0.1.1
4 Click the DNS tab and enter the following information:
Default Domain: example.com
DNS Servers: 10.0.1.2
5 Click the Save button and log out of Server Settings. </pre>

Can't find "Windows Remote Management (WinRM)" in Group Policy Management console

So looking at different scenarios for enabling WinRM / PSRemote. Find all kinds of information on how to do it... stoked right!? Not so much, I can't find Windows Remote Management (WinRM) where it should be, or anywhere else. WTF? Any ideas here kids?And
OBTW, Domain Functional Level is 2008 R2 with Windows 2012 R2 DC's.

Oh man, found the answer... Doh!
Run from an elevated command prompt;
robocopy "%windir%\policydefinitions" "\\%userdnsdomain%\sysvol\%userdnsdomain%\policies\policydefinitions" /s
So there you go.

Any ideas how can install an old Canon BJC80 printer on mac osx 10.5 can only find windows drivers on the disk or on canons website!

Hi have just got a second hand Canon BJC-80 laptop printer and am trying to install on an imac running 10.5 I have been on the canon website and can only find drivers for windows based operating systems. Tried the add printer but nothing in the list. help.

I think the sitation with the Canon BJC-80 is a little confused. I think the Canon web site is confused.
I get conflicting information. I suggest trying Gutenprint and Gimp-Print for Mac OS X. Gimp-Print is the older name for Gutenprint.
I haven't had much luck with Gimp-Print. Hopefully you will do better.
http://gimp-print.sourceforge.net/p_Supported_Printers.php
Doesn't list the BJC-80 as support in Mac OS X.
Available in Lion
http://support.apple.com/kb/HT3669
Canon BJC-80 - Gutenprint v5.2.3
5.2.3
P
Available in Windows 7
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type =Hardware&p=Canon%20BJC-80%20Inkjet%20Printer&v=Canon&uid=Q302340US1&pf=2&pi=4&c =Printers%20%26%20Scanners&sc=Ink-Jet%20Printers&os=64-bit

IMac can't find network printers

We have 4 Macs in the office and a bank of 4 printers all of which have been working great and connecting together for a while with no issues. However in the last few days the iMac can't find 2 of the printers. We tried to reload them through Print and Scan preferences but they didn't appear in the preferences. Checked all the cabling and hub and everything seems OK. Booted the iMac in Safe Mode and it could see them both straight away, rebooted the iMac and again they did not appear in the list, Tried to share one of the printers from a MacPro and it appeared in the list however sometimes it just won't print to it, it seems to print but nothing appears at the printer. Since then we have reinstalled Mavericks, Verified and Repaired Permissions, Verified the HD, reset the PRAM, all to no avail.
Apart from that the iMac prints to the other printers on the network without any problem and connects to the other Macs with no problems as well. We're using 10.9.4 on a 2.7GHz iMac with 8GB of memory. The other Macs can all see and print to all the printers. We are using a wired ethernet connection, not wireless.
Has anyone any suggestions as to the problem as it's becoming really annoying now.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Bootcamp can't find windows 7 disc

Okay so the issue I'm having is this: I have Windows 7 x64 Professional burned to a disc. Everytime I go to hit install on Bootcamp assisant it states that it can't find my windows disc. I tried other Windows disc and the same exact thing happen. Is there a way to manually duel boot instead of using Bootcamp cause this *****! I've been going at it for 4 hours now.

This is what I find on the web. Hope it helps.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=315...
Says workaround.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=315...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT4796 Mac can't find Window XP computer

The Migration Assistant is open on a Windows XP computer and "waiting for your Mac to connect", and the Mac is searching but they can't find each other. What should I do to help them? Both are on the same ethernet.

Thank you! That information was definitely helpful.
I haven't tried since my post to get our printer to work (ended up sending my doc to Staples, in the interest of time, and haven't had to print anything since).
Anyway, this morning I replaced our ink and tried printing something. It still wasn't working (but this time, all it said was the printer wasn't connected). I reconnected the printer to the network, then turned it off, restarted our computer, and once the computer was back up, I turned the printer back on.
The printer appeared in our network, again, and my printing job was successful. Yay! I LOVE when technology works. =)

Qosmio G50 - Where can I find Windows 7 drivers?

I own this portable:
Qosmio G50 series PQG55E
But I don't find the download area for Windows 7. There is a place where? For other series I found a section but does not correspond to my model. You know where it can be?
Thanks

I'm owner of a Qosmio G50 PQG55E too.
At the moment I use as OS Vista 32 Bit.
I like to change the OS to Win7 64 Bit .
Is it possible to run the G50 under a 64 Bit system ?
Where can I find 64 Bit drivers ?
At the download area of Toshiba I can only find four 64 Bit drivers and more than 100 32 Bit drivers :(
Will Toshiba offer 64 Bit drivers in the near future ?
Best regards from Germany,
Bernhard

Can not find windows sever 2003 file sever on a windows 8 pro laptop

I can not find my windows sever 2003 file sever on my windows 8 pro laptop. I have tried over wireless and over ethernet. can some one please help me!

Hi,
Assuming this Windows 8 Enterprise machine isn't locked down with Group Policy.
This type of problem usually requires that you change the lanman server parameters in order to get Windows 8 working with older servers. Do these adjustments on the Windows 8 machines that needs to connect to the server.
Control Panel - Administrative Tools - Local Security Policy
Local Policies - Security Options
Network security: LAN Manager authentication level
Set to Send LM & NTLM responses only
Set the Minimum session security for NTLM SSP
Disable Require 128-bit encryption
Reboot all machines after making the adjustment.
Kate Li
TechNet Community Support

Can't find my printers over WLAN

Hi,
I have 2 servers, a ethernet LAN. All printers and macs are connectet throug cables and a switch.
Now having a WLAN router and can connect with airport to server, internet and all.
But I can't find (see) any printer.
How can I print over this WLAN?
Thank for help

Is your base station acting as a router or a bridge?
As a router, it has different IP addresses on each 'side' - one for the wired and one for the wireless networks. In this setup the wired and wireless devices are separate, and the router performs Network Address Translation (NAT) for connections that go across the link.
In Bridge mode, the base station acts as a simple bridge between the wired and wireless worlds - everyone is on the same network.
From your description it sounds like you're in routed mode and that's why you can't print - the auto-discovery system can't see past the wireless router to see what's on the other side.
Changing the wireless router to bridged mode will remove that block and allow you to print.

Satellite A500-19W - Where can I find Windows 7 32bit drivers?

I have got a Satellite A500-19w. I want to install Windows 7 32 bit but I can't find any drivers.
Please help me to find the drivers.

Hi
I have checked the Toshiba website but unfortunately it seems that there are no Windows 7 32bit drivers, only for 64bit Windows 7.
But have you tried the Vista 32bit drivers? Normally the most of them should work.
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Check this!!

FaceTime says it's running but can't find window anywhere

Hey, Facetime for Mac has worked fine for me forever, but now when I try and open it it says it's open but I can't find it anywhere and it doesnt seem to actually be running. I've tried closing and reopening it multiple times, as well as restarting the computer. No updates show up in the app store either.
Thoughts?
Thanks

Try this link
Manage your iCloud storage
http://support.apple.com/en-us/HT4847

Os x can't find windows printers

Similar Messages

Maybe you are looking for