OS X Connectivity and Upgrade
All,
My CFO had me do some work at his house on the Apple network. He has a Mac Mini Server that he has his IP cameras storing the video's on. He has a personal website setup so that he can log into the cameras from anywhere. All that makes sense to me (I didn't setup the network, so I'm learning on the fly).
He was running 10.7.5 on teh mini and all other Macs (11) in the house are on 10.8.2. At some point, after an upgrade to his Macs, the software he had from apple (Server Managment) quit working b/c it would not work with the new update on the Mac.
I started looking around and found the new OS X Server app for ML. I had to upgrade the server to 10.8.2 first before I could put the app on the server.
Did Apple change (discontinue the Server Managment SW) and require teh server app now?
Thanks.
Shane
You can go to 10.8 directly from 10.6 if your machine supports it.
However your going to lose your PPC based programs and hardware drivers that are running using Rosetta in 10.6 (not in 10.7 or 10.8)
Also your machine could possible slow down quite a bit, as well as radical UI changes.
Don't say I didn't warn you.
You can clone your present 10.6.8 boot drive using Carbon Copy Cloner to a blank powered external GUID OS X extended journaled formated drive.
If you decide 10.8 is a drag, you can hold the option key down and boot off the 10.6 clone and erase the entire drive and reverse clone.
You also can keep the 10.6 to run programs 10.8 won't.
Similar Messages
-
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
A message keeps popping up when I try to join my network that says, "unable to join the network."
I have already reset network settings and restored ipod to original settings.
I already updated iTunes and upgraded iPod to iOS 6.
The password is correct. I even made sure by checking my wifi account.
I have completely restarted my internet connection multiple times.
I have also restarted my ipod multiple times
My wifi was working on my iPod yesterday before I reset all settings.
I updated it yesterday to iOS 5. Still didn't work.
It wasn't updated to the new iOS 6 until today so I don't think it has anything to do with the upgrade.
My camera started to be glitchy, so I reset my Ipod like I was advised in another discussion.
My internet wasn't connected anymore. My password wasn't working either, but the wifi connection was still showing.
Safari still wasn't working, though.
I did the sensible thing and I reset my network connection.
Now, the password isn't working and there's no wifi signal.
The camera is working well now, but the wifi is messed up. I didn't expect any of this to happen. The internet is all I use the iPod for. Now, the iPod is useless to me. Please help?are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>? -
I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows
Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H. -
i had to upgrade from ios7 to ios8 but it needed more storage i had so i backed up my phone to my computer then deleted the content on my phone and upgraded to ios8. i have not connect my phone and computer since. how do i get my content back?
Restore the backup from your computer
-
After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.
May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them. -
Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why can't I log in to sign up new software upgrade? I have internet connection and my clock is corre
Why can't I log in to sign up new software upgrade? I have internet connection and my clock is correct.
Where are you trying to log in to something - is there a URL? Describe the steps you are taking and what happens.
-
After trying to update to iOS 7, my iPhone 4 says connect to iTunes, which I've done 4 times. It keeps saying restore and upgrade but won't do it. Help!,,,,
Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the light.
I cant even get into itunes because it wont recognize it to do a reboot or a rollback.The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
EyalI tried this! Somebody suggested it in another thread. It did not work, sadly.
-
Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Firefox would not connect after upgrade. Did system restore (XP) and not firefox wont even start
Firefox would not connect after upgrade from verion 6 to version 7. Did system restore (XP) and now firefox wont even start
Sometimes Firefox will hang during startup or shutdown, and still be running invisibly in the background. Usually in that case, you need to "kill" it either by restarting Windows or using the Windows Task Manager. It sounds as though you are familiar with opening the Processes tab, finding firefox.exe, and using End Process.
If you use an advanced firewall or other security software that tracks which programs are permitted to use the internet, please see these articles:
* [[Fix problems connecting to websites after updating Firefox]]
* [[Configure firewalls so that Firefox can access the Internet]]
A couple of other suggestions:
(1) Can you start Firefox in its Safe Mode? Hold down the Shift key when starting Firefox. You should get a two-button dialog. Click "Start in Safe Mode" (''not'' Reset). Any difference?
(2) In case your regular software missed something that is interfering with Firefox, try the scanning and clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]] -
i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.
YOu'll have to restore, nothing else you can do.
If you have an older backup you can restore to that.
Maybe you are looking for
-
How to make screen field enable when table control gives an error
Hi, I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
-
Four fingers swipe won't work on magic trackpad
Hello, just bought a magic trackpad to use with my macbook pro and a second display. Mainly, I purchased the accessory for the four fingers swipe between full screen apps and it doesn't work. If I change the command to a 3 fingers swipe, it does work
-
My JSP code that calls the bean is as follows: <%@ page import ="java.sql.*" %> <%! String loginId, logPassword; %> <% loginId=request.getParameter("LoginId"); logPassword=request.getParameter ("LogPassword");%> <jsp:useBean id="simpleCon" scope
-
Saving SWF with Transparent Background - Possible?
I have made a box with a rounded corner and a border in Flash but when I publish the file the outer edge of the corner is still white and I want it transparent so it takes on the color of the website background. How can I get my background to be tran
-
My website provider upgraded my website to MX 8 and now my CFREPORT functions that produce mailing labels are failing. I've done some googles on the error, but really can't find anything to help. The error message is at such: java.lang.NoClassDefFoun