OS X freezes after Dropbox permission fail

Hi
Earlier this week popup saying Dropbox permission fail and the os begins to freeze.
I managed to unlink it, and re-install it. Still freezes.
I searched some discussions and go into safe mode, doing kextstat -kl | awk ' !/apple/ { print $6 } ' as some people recommend here https://discussions.apple.com/thread/4175088?start=0&tstart=0
there was no results on my end.
anyhow some possibilities like Crossover and Little Snitch are now completely uninstalled.
Also, I did repair disk permissions 2x and verify disk diagnose said that the volume is ok.
last but not least, I did reset PRAM too
after all, still freezes ... unfortunately its 1 year warranty is over last July 2013
I can no longer open AppStore as everytime it reboots even in safe mode, it freezes rightaway this morning
Can someone advise...
Thanks

Trying running this program and then copy and paste the output in a reply. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information

Similar Messages

After installing 10.9.4 computer freezes after sleep

After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      1% WindowServer
      1% fontd
      1% CrashPlan menu bar
      0% Fitbit Connect Menubar Helper
      0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My Mac freezes after waking up

I have a rMBP mid 2014 that keeps freezing after sleep, but not every time, since I upgraded to latest Yosemite 10.10.3. I can move the mouse and close all active programs, but it takes long time and will anyway not restart after that. I have to force power off and then power on again, then it will work for a while.
I have tried to do the upgrade again och even tried to reinstall Yosemite again, but it didn't help. Here's a report:
EtreCheck version: 2.2 (132)
Report generated 5/5/15, 11:24 AM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 13-inch, Mid 2014) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,1
    1 2.8 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery: Health = Normal - Cycle count = 52 - SN = C01446209C2FT60AN
Video Information: ℹ️
    Intel Iris
        Color LCD 2560 x 1600
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:10:5
Disk Information: ℹ️
    APPLE SSD SM0256F disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.80 GB (87.51 GB free)
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.vnic (10.2.0 28956 - SDK 10.7) [Click for support]
        /Library/Extensions
    [not loaded]    com.Elgato.Thunderbolt2DockChargingSupport (1.0.0 - SDK 10.10) [Click for support]
    [not loaded]    com.Elgato.ThunderboltDockChargingSupport (1.0.0 - SDK 10.10) [Click for support]
    [not loaded]    com.elgato.ElgatoThunderboltDockAudioRename (1.0.2 - SDK 10.10) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    StartOuc: Path: /Library/StartupItems/StartOuc
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [loaded]    com.acronis.acep.plist [Click for support]
    [running]    com.teamviewer.teamviewer.plist [Click for support]
    [running]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
    [running]    com.bombich.ccchelper.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Program (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    XtraFinder    Program (/Applications/XtraFinder.app)
Internet Plug-ins: ℹ️
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
    nplastpass: Version: 3.1.77 - SDK 10.10 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 249.80 GB Disk used: 162.29 GB
    Destinations:
        Images [Network]
        Total size: 2.20 TB
        Total number of backups: 17
        Oldest backup: 2014-12-01 13:56:38 +0000
        Last backup: 2015-04-06 09:44:01 +0000
        Size of backup disk: Excellent
            Backup size 2.20 TB > (Disk size 249.80 GB X 3)
Top Processes by CPU: ℹ️
        77%    mdworker(9)
         3%    WindowServer
         2%    fontd
         0%    Microsoft Lync
         0%    taskgated
Top Processes by Memory: ℹ️
    820 MB    kernel_task
    377 MB    com.apple.WebKit.WebContent(5)
    360 MB    Microsoft Outlook
    246 MB    Dock
    164 MB    mdworker(9)
Virtual Memory Information: ℹ️
    10.00 GB    Free RAM
    6.03 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 5, 2015, 11:13:37 AM    Self test - passed
I'd be grateful for any help.

Rid the MBP of CleanMyMac. It may very well be the source of your problems.
NO so called cleaning or performance applications should be installed in a Mac. At best they will do nothing, at worst they can corrupt your system.
Ciao.

Keyboard and trackpad freeze after being idle for a few minutes

I have a early 2008 MBP and just today the keyboard and trackpad freeze after not using it for a few minutes. I was at work when it happened. I plugged it in and started doing something else and a few minutes later came back and i couldn't move the mouse or do anything with the keyboard, but processes were still running. For example, I have a fan speed app that sits in the toolbar, and it was still showing current fan speed. So I restarted it, and it did it again. So the next time it happened, I closed the lid and opened it up and it fixed it. It's happened several times now after a few minutes of non use and I just close the lid and it fixes it. Also, there was a period when I was using my computer for a couple of hours non stop and it didn't have a problem. Only when I'm not touching the keyboard or trackpad does it do it. since this keeps happening i have verified the disk in disk utility, done a hardware reset with cmd+opt+p+r, ran through system profiler to see if there were any problems with no results, and it still does it. Anyone have any ideas?
It should be noted that not only does the battery not work for more than about 2 minutes, the left I/O board appears to be dying. The power chord takes a considerable amount of wiggling and adjusting before it finds a place where it will actually charge. The audio out and the USB on that side are the same way. So I am aware of that problem. Also, I have had to take out the right side fan multiple times and disassemble and oil the bearing because it's going bad, which requires taking the top plate off, but I haven't had to do that for over 6 months. In my mind if the problem was caused by taking the top plate off, that would fry the entire top plate, which happened once when a technitian at a local company took the computer apart for a waranty repair. All of these problems considered, I don't think they would have anything to do with the fact that the mouse and keyboard suddenly won't work after about 5-10 minutes of sitting idle. I have done nothing different since yesterday that would explain why it does this.
Also, I can't do anything with the install disk because the CD drive is dead. But that's mostly because it was a piece of garbage to begin with.
Any Ideas would be helpful.

After doing some more digging I was watching processes in Activity Monitor to see if I could see what process is failing. I think the problem with with Chrome. It only happened when Chrome was open. And since then I reinstalled it and the problem has so far gone away. So, I think the problems is solved.

Media encoder freezes after 4.2 update installation

Hey guys,
I´m in a middle of a huge project and I updated premiere and media encoder to a new 4.2 version. After that I can´t get anything out of premiere cause every time I try to export media encoder totally freezes after couple of seconds after I´ve pushed start queue. I can´t do nothing but to force to quit. It happens while it is still loading the project and haven´t started to encode yet. What´s the problem here?
I´m on mac pro 8-core and cs4 master collection

How long did you wait before force quitting? If it was only a minute or two, try longer.
If that doesn't work, then remove all of the old queue items from the AME.
Then save your Pr project, and clean the media cache database from Edit | Preferences.
Reboot and try again.
If all of that fails, then trash your Pr and AME preferences and try again.
-Jeff

G4 running OS 10.5.4 freezes after start-up

My G4 is running Mac OS 10.5.4. It started frequently freezing after restart many months ago. I have to hard restart a few times and then it will eventually work, or, I can start-up in safe mode and then restart and it will work just fine. Once we are up and running there are no problems. I cannot link this problem to any new downloads or programs. I thought it might be hard drive failure and replaced the hard drive on the machine, but I still have a problem.
Any ideas on how to fix this?

Welcome!
Can you be more specific about which G4 you have? There are a number of variants that can have different hardware issues. These two Apple tech documents are helpful in determining the exact model:
G4 Minitowers prior to Jan 2002
G4 Minitowers since Jan 2002
As you are running Leopard, I assume that your processor is at least 867mHz.
Was the computer stable prior to installing Leopard?
Did you use Leopard retail install disks?
Do you have enough RAM? How about free space on the hard drive? Free space should be at least 15 percent, more if you have limited RAM. %12MB RAM is about the minimum I'd try for runnign Lepoard.
When it freezes, do you get a bunch of cryptic writing on the screen or does it lock up with no information showing on-screen?
If the problems showed up after an incremental update (example: applying the 10.5.1 to 10.5.2 update), sometimes repairing permission on your boot volume can help.
Do you have any third-party PCI cards installed? What video card do you have?
I know this is a lot to digest, but is a start on the troubleshooting process.
Allan

Macbook Pro Freezes after wake up from sleep

My Macbook Pro 5,5 with mountian Lion freezes after waking up from sleep. i have 8 GB RAM and did a hardware test wich was passed. I also have a SSD of 240 GB in the optical drive. this is my startup drive. Another HD is my workdrive. The first thing I see is that the Airport does not come back and it seems that is does not wake up. After that the whole finder freezes.
What can be the problem?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

IBook G4 freezes after 10 minutes

my iBook G4 freezes after a few minutes of use.
it starts up but freezes after around 10 minutes (variable 5 - 20 mins). The screen is frozen and no keyboard or mouse input is accepted. Only way out I found was to power-off. This happens from cold.
When warm, it freezes on startup with blue screen.
I have been able to clear the disc and reload MAC OS from install discs and the symptoms are identical. There are no modifications, no devices connected, no network connection and the wifi is turned off. It makes no difference whether the battery is removed and run on power supply or simply run on fullycharged battery.
I tried:
1. remove/replace wifi card and memory check connections OK.
2. Startup from install disc and repaired disc, although it was OK. Disc seems to be fine.
3. Reset PROM.
4. stored the iBook in a cold place and it ran for longer.
5. Ran a temperture monitor - all temperatures are OK.
6. I have tried using the latest MAC OS 10.4 and the original one supplied with th iBook (10.3).
I do not think it is a disc, airport card, cooling fan or battery fault. It could be a memory module failure or some motherboard fault. Its not software or driver.
I think the only thing left is that some hardware fails when it gets wram and works agin when cold. The colder t is to at startup, the longer it works for.
I have now run out of ideas.

It ran long enough to install from disc-1 then froze. After restarting, it asked for disc-2 and that loaded then froze. After restarting, it worked a short while then froze. To get this far, I left the iBook in a cold place before starting it up and this extended the runtime from the normal 5 minutes to as much as 25 minutes.
I disconnected the disc and it behaved the same while starting from the CD drive so I think the disc is OK or its more than one cause.
This feels like a dry solder joint problem, to me - applying pressure on the motherboard or lowering the temperature will temporarily fix it for a few minutes.
If I pay for a repair then, statistically, it will last 3 months longer so its too risky. It would not be so bad if Apple could repair it with confidence that it will not have the same problem again, but to do that they would have to admit to what causes the this problem with so many iBooks.

IChat freezes after 10.5.5. update

Since upgrading to 10.5.5, I have experienced freezes while video chatting in iChat. These freezes happen, on average, every 10-20 minutes. I never had this problem with 10.5.4. Anyone else noticing this? Any ideas of what may be causing this, or it just a bug that I should hope will be fixed in 10.5.6?

Just wanted to add that I am experiencing this too. Everything was fine until the combined update to 10.5.5 and QT 7.5.5. Now my video freezes after about 30 seconds into a chat. The sound keeps going for a while. I need to force exit iChat to quit. The are a lot of suggestions on these and other forums about how to fix this: limiting streaming bandwidth, re-installing QT, deleting plist files, etc. Nothing seems to work. Here's what I know so far:
1. Everything was fine until 10.5.5/QT7.5.5 update
2. Not all connections fail. One buddy never fails, one other always does.
3. Test user [email protected] freezes for me 9 out of 10 times.
4. The 10th time it's fine.
5. Shutting off WeatherDock does not fix it.
6. QT streaming rate throttling in preferences does not fix it.
7. Bandwidth limiting in iChat prefs don't fix it.
8. Re-installing QT does not fix it.
9. Re-installing QT in safe mode after fixing disk permissions doesn't fix it.
10. No combination of the above fixes it.
This is a problem the NEEDS TO BE FIXED, Apple are you listening?
I bought a mac because they said "it just works", I guess not.
I suggest we all send more complaints to Apple. I let the app debugger send its logs to apple a few times per day.

Phone Freezes after everycall

Hi,
My Iphone 3GS, freezes after i make / receive a call, this happens everytime. Have others faced a similar issue?

Standard troubleshooting steps in order are; power your iPhone off and on, Reset - which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore your iPhone with iTunes from your iPhone's backup - be sure to sync your iPhone with iTunes immediately before doing so to update your iPhone's backup and any data that is kept synchronized, Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup if all else fails.
If no change after all of these steps, you can call AppleCare at (800) 694-7466, or make an appointment at an Apple store if there is one nearby.

Mac freezes after 10 minutes, hard drive and sata cable replaced

MacBook Pro (MacBook Pro 15" Unibody 2.53 GHz Mid 2009) froze about a month ago. Computer would get slow and then just stop responding. Wouldn't even respond to force quit commands. Press and hold power button only way to free it up.
Directory Scan, Volume Structure failed. Bad Blocks.
Purchased new hard drive (Western Digital Blue 320 GB Mobile Hard Drive: 2.5 Inch, 5400 RPM, SATA II, 8 MB Cache) and replaced. Try restore from time machine, fails - freezes up with about 20 minutes remaining to finish.
Got a USB SATA cable (external) and new SATA cable (internal) for computer.
The drive and computer work fine when connected via external USB. Ran Apple Harware Test (ok), reset NVRAM, all software is up to date.
I replaced SATA cable in computer and tried drive internal - same problems. Still freezes after working for just a short while.
So to sum it up, new drive works via external USB but not when installed internally.
Any ideas what it could be? Did I buy the wrong drive? Do I have two bad SATA cables? Something else entirely?
Thanks! Mike

On you picture going from right to left. the cables are/WIFI/Optical Drive/Hard Drive/ Battery. What you have circled is the cable for the Hard Drive. Sometimes you can have a little extra tape on the connector. I would not use it as a grab point to remove an reseat the cable. You would want to carefully pull the cable loose and make sure there is no separation in it and then reseat it. I cannot see your hard drive in the picture,so I do not know if you have the sata or ssd drive. If it is the sata drive ,do you hear any light clicking noise when you startup? This would mean that you have possible drive damage. If you have a ssd drive (solid state drive) it is not possible to damage the drive by jarring it as there are no moving parts. Make sure all connection cables are fully seated. Include reseating of memory. If in recovery/utilities/disk utilities/ your startup volume does not show, that is problematic.There is single user and SMC reset. after that I do not know what to advise.https://support.apple.com/en-us/HT201295 https://support.apple.com/en-us/HT203176

ITunes 12.0.1.26 freezes after connecting iDevices

iTunes 12.0.1.26 freezes after connecting iDevices, iphone 6, ipod and ipad

13/1/15 23:35:55,720 iTunes[425]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
13/1/15 23:35:55,725 iTunes[425]: tid:117 - unable to query device capabilities
13/1/15 23:35:55,971 com.apple.usbmuxd[51]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,8e6607c1
13/1/15 23:35:58,314 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.pid.MediaLibraryService.441) Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
13/1/15 23:35:58,315 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.pid.MediaLibraryService.441) Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
13/1/15 23:35:58,872 com.apple.MediaLibraryService[441]: Preflight for plugin com.apple.ILPhotosPlugin failed, so it will not load. Error Domain=NSCocoaErrorDomain Code=3587 "The bundle “iLMBPhotosPlugin” couldn’t be loaded because it is damaged or missing necessary resources." (dlopen_preflight(/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin): Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Phot oLibraryPrivate
Referenced from: /Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin
Reason: image not found) UserInfo=0x7fba1bd243a0 {NSLocalizedFailureReason=The bundle is damaged or missing necessary resources., NSLocalizedRecoverySuggestion=Try reinstalling the bundle., NSFilePath=/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin, NSDebugDescription=dlopen_preflight(/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin): Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Phot oLibraryPrivate
Referenced from: /Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin
Reason: image not found, NSBundlePath=/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin, NSLocalizedDescription=The bundle “iLMBPhotosPlugin” couldn’t be loaded because it is damaged or missing necessary resources.}
13/1/15 23:35:58,903 com.apple.SecurityServer[52]: Session 100028 created
13/1/15 23:36:00,129 SyncServer[443]: [0x7fc8e2c19df0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 275261014016 bytes free in tatianarodriguez.
13/1/15 23:36:00,131 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[443]) Service exited with abnormal code: 1
13/1/15 23:36:01,201 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:01,355 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:06,323 com.apple.xpc.launchd[1]: (com.apple.PhotoApps.AVCHDConverter) Unknown key for dictionary: EnvironmentVarialbles
13/1/15 23:36:06,323 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
13/1/15 23:36:09,075 WindowServer[121]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
13/1/15 23:36:09,294 WindowServer[121]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 1.22 seconds (server forcibly re-enabled them after 1.00 seconds)
13/1/15 23:36:10,509 SyncServer[449]: [0x7fcc79d074e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 275260944384 bytes free in tatianarodriguez.
13/1/15 23:36:10,510 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[449]) Service exited with abnormal code: 1
13/1/15 23:36:11,370 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:11,526 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:13,474 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:13,484 WindowServer[121]: Found 34 modes for display 0x04272902 [34, 0]
13/1/15 23:36:13,505 WindowServer[121]: Received display connect changed for display 0x3f003f
13/1/15 23:36:13,505 WindowServer[121]: Found 1 modes for display 0x003f003f [1, 0]
13/1/15 23:36:13,505 WindowServer[121]: Received display connect changed for display 0x3f0040
13/1/15 23:36:13,505 WindowServer[121]: Found 1 modes for display 0x003f0040 [1, 0]
13/1/15 23:36:13,506 WindowServer[121]: Received display connect changed for display 0x3f0041
13/1/15 23:36:13,506 WindowServer[121]: Found 1 modes for display 0x003f0041 [1, 0]
13/1/15 23:36:13,507 WindowServer[121]: CGXMuxAcknowledge: Posting glitchless acknowledge
13/1/15 23:36:13,524 WindowServer[121]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04272902 device: 0x7f8390d0ad20 isBackBuffered: 1 numComp: 3 numDisp: 3
13/1/15 23:36:13,551 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:13,552 WindowServer[121]: Found 1 modes for display 0x04272902 [1, 0]
13/1/15 23:36:20,556 SyncServer[452]: [0x7fc931e074e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274186420224 bytes free in tatianarodriguez.
13/1/15 23:36:20,556 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[452]) Service exited with abnormal code: 1
13/1/15 23:36:21,548 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:21,703 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:22,707 CoreServicesUIAgent[258]: unexpected message <OS_xpc_error: <error: 0x7fff7abcfc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7abcff70> { length = 18, contents = "Connection invalid" }
}>
13/1/15 23:36:22,831 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:22,837 WindowServer[121]: Found 17 modes for display 0x04272902 [17, 0]
13/1/15 23:36:22,878 WindowServer[121]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04272902 device: 0x7f8390d0ad20 isBackBuffered: 1 numComp: 3 numDisp: 3
13/1/15 23:36:22,885 WindowServer[121]: CGXMuxAcknowledge: Posting glitchless acknowledge
13/1/15 23:36:22,897 WindowServer[121]: Received display connect changed for display 0x4272902
13/1/15 23:36:22,897 WindowServer[121]: Found 1 modes for display 0x04272902 [1, 0]
13/1/15 23:36:22,898 WindowServer[121]: Received display connect changed for display 0x3f003f
13/1/15 23:36:22,898 WindowServer[121]: Found 1 modes for display 0x003f003f [1, 0]
13/1/15 23:36:22,898 WindowServer[121]: Received display connect changed for display 0x3f0040
13/1/15 23:36:22,898 WindowServer[121]: Found 1 modes for display 0x003f0040 [1, 0]
13/1/15 23:36:22,898 WindowServer[121]: Received display connect changed for display 0x3f0041
13/1/15 23:36:22,898 WindowServer[121]: Found 1 modes for display 0x003f0041 [1, 0]
13/1/15 23:36:30,755 SyncServer[453]: [0x7fd261607420] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188038144 bytes free in tatianarodriguez.
13/1/15 23:36:30,756 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[453]) Service exited with abnormal code: 1
13/1/15 23:36:31,728 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:31,880 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:40,903 SyncServer[454]: [0x7f9bf04198f0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188038144 bytes free in tatianarodriguez.
13/1/15 23:36:40,904 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[454]) Service exited with abnormal code: 1
13/1/15 23:36:41,900 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:42,055 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:36:51,081 SyncServer[455]: [0x7fb922507c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188029952 bytes free in tatianarodriguez.
13/1/15 23:36:51,081 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[455]) Service exited with abnormal code: 1
13/1/15 23:36:52,086 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:36:52,238 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:01,265 SyncServer[456]: [0x7f8edad07c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187849728 bytes free in tatianarodriguez.
13/1/15 23:37:01,266 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[456]) Service exited with abnormal code: 1
13/1/15 23:37:02,256 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:02,408 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:11,435 SyncServer[457]: [0x7f9ae1c198f0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187849728 bytes free in tatianarodriguez.
13/1/15 23:37:11,435 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[457]) Service exited with abnormal code: 1
13/1/15 23:37:12,441 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:12,595 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:21,621 SyncServer[458]: [0x7ffb6bc19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187485184 bytes free in tatianarodriguez.
13/1/15 23:37:21,621 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[458]) Service exited with abnormal code: 1
13/1/15 23:37:22,625 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:22,780 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:31,804 SyncServer[459]: [0x7f91da507c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187485184 bytes free in tatianarodriguez.
13/1/15 23:37:31,805 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[459]) Service exited with abnormal code: 1
13/1/15 23:37:32,800 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:32,957 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:41,984 SyncServer[460]: [0x7fa46bc19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187468800 bytes free in tatianarodriguez.
13/1/15 23:37:41,984 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[460]) Service exited with abnormal code: 1
13/1/15 23:37:42,987 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:43,140 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:37:52,168 SyncServer[461]: [0x7fb7e0c19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187464704 bytes free in tatianarodriguez.
13/1/15 23:37:52,169 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[461]) Service exited with abnormal code: 1
13/1/15 23:37:53,160 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:37:53,317 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:02,346 SyncServer[462]: [0x7fcd20e079e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187464704 bytes free in tatianarodriguez.
13/1/15 23:38:02,347 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[462]) Service exited with abnormal code: 1
13/1/15 23:38:03,333 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:03,490 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:12,513 SyncServer[463]: [0x7f8502e077c0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274187440128 bytes free in tatianarodriguez.
13/1/15 23:38:12,514 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[463]) Service exited with abnormal code: 1
13/1/15 23:38:13,512 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:13,666 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:22,689 SyncServer[464]: [0x7fa469419b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188554240 bytes free in tatianarodriguez.
13/1/15 23:38:22,690 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[464]) Service exited with abnormal code: 1
13/1/15 23:38:23,682 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:23,838 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:32,864 SyncServer[465]: [0x7fe0b04199f0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188554240 bytes free in tatianarodriguez.
13/1/15 23:38:32,865 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[465]) Service exited with abnormal code: 1
13/1/15 23:38:33,864 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:34,016 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:43,042 SyncServer[466]: [0x7fca1ac19b40] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188496896 bytes free in tatianarodriguez.
13/1/15 23:38:43,043 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[466]) Service exited with abnormal code: 1
13/1/15 23:38:44,045 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:44,198 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:38:53,225 SyncServer[467]: [0x7fcfe9d07790] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188496896 bytes free in tatianarodriguez.
13/1/15 23:38:53,226 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[467]) Service exited with abnormal code: 1
13/1/15 23:38:54,222 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:38:54,378 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:03,406 SyncServer[468]: [0x7fbd016074e0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188492800 bytes free in tatianarodriguez.
13/1/15 23:39:03,407 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[468]) Service exited with abnormal code: 1
13/1/15 23:39:04,398 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:04,549 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:09,949 sharingd[221]: 23:39:09.948 : Starting Handoff advertising
13/1/15 23:39:13,578 SyncServer[469]: [0x7ff213507c90] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188419072 bytes free in tatianarodriguez.
13/1/15 23:39:13,579 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[469]) Service exited with abnormal code: 1
13/1/15 23:39:14,583 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:14,739 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:19,342 sharingd[221]: 23:39:19.342 : Starting Handoff advertising
13/1/15 23:39:20,635 sharingd[221]: 23:39:20.635 : Starting Handoff advertising
13/1/15 23:39:22,640 sharingd[221]: 23:39:22.639 : Stopping Handoff advertising
13/1/15 23:39:23,763 SyncServer[470]: [0x7ff141419920] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188398592 bytes free in tatianarodriguez.
13/1/15 23:39:23,764 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[470]) Service exited with abnormal code: 1
13/1/15 23:39:24,760 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:24,912 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:25,587 Office365Service[471]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
13/1/15 23:39:25,588 Office365Service[471]: 0   CarbonCore                          0x987a97e7 ___Gestalt_SystemVersion_block_invoke + 135
13/1/15 23:39:25,588 Office365Service[471]: 1   libdispatch.dylib                   0x99d84130 _dispatch_client_callout + 50
13/1/15 23:39:25,588 Office365Service[471]: 2   libdispatch.dylib                   0x99d840b5 dispatch_once_f + 251
13/1/15 23:39:25,588 Office365Service[471]: 3   libdispatch.dylib                   0x99d850d8 dispatch_once + 31
13/1/15 23:39:25,588 Office365Service[471]: 4   CarbonCore                          0x9873bfb8 _Gestalt_SystemVersion + 1050
13/1/15 23:39:25,588 Office365Service[471]: 5   CarbonCore                          0x9873bb69 Gestalt + 150
13/1/15 23:39:25,588 Office365Service[471]: 6   Office365Service                    0x000589a3 Office365Service + 358819
13/1/15 23:39:33,939 SyncServer[472]: [0x7fcec36076c0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188382208 bytes free in tatianarodriguez.
13/1/15 23:39:33,940 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[472]) Service exited with abnormal code: 1
13/1/15 23:39:34,937 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:35,094 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.
13/1/15 23:39:44,124 SyncServer[473]: [0x7ffb386076c0] |SQLite|Error| Detected out-of-space situation: 0 (Undefined error: 0). 274188451840 bytes free in tatianarodriguez.
13/1/15 23:39:44,125 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer[473]) Service exited with abnormal code: 1
13/1/15 23:39:45,103 AppleMobileDeviceHelper[442]: [0x10031c230] |Mingler|Error| failed to connect to the server: NSInvalidReceivePortException connection went invalid while waiting for a reply because a mach port died
13/1/15 23:39:45,258 com.apple.xpc.launchd[1]: (com.apple.syncservices.SyncServer) Service only ran for 1 seconds. Pushing respawn out by 9 seconds.

[SOLVED]pc freezes after resuming from suspend.

When I upgraded kernel from linux-3.3.8-1 to linux-3.4.2-2 or later , PC freezes after resuming.
Monitor comes back and kde requires passward , but after few seconds , everything freezes.
keyboard and mouse won't respond.
There is no log after resuming.
Is there anybody who have same trouble?
CPU intel core i7 2600k
MB asrock H67M-GE
/var/log/pm-suspend.log
Initial commandline parameters:
Thu Jun 21 16:52:33 JST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux myhost 3.4.3-1-ARCH #1 SMP PREEMPT Mon Jun 18 08:28:29 CEST 2012 x86_64 GNU/Linux
Module Size Used by
w83627ehf 31388 0
hwmon_vid 3196 1 w83627ehf
xt_hl 1369 6
ip6t_rt 2112 3
nf_conntrack_ipv6 6650 7
nf_defrag_ipv6 6401 1 nf_conntrack_ipv6
ipt_REJECT 2281 1
xt_LOG 11975 9
xt_limit 2041 12
xt_tcpudp 2503 18
xt_addrtype 2853 4
xt_state 1295 14
ip6table_filter 1396 1
ip6_tables 18198 2 ip6table_filter,ip6t_rt
nf_conntrack_netbios_ns 1077 0
nf_conntrack_broadcast 1285 1 nf_conntrack_netbios_ns
nf_nat_ftp 1668 0
nf_nat 15100 1 nf_nat_ftp
nf_conntrack_ipv4 6871 9 nf_nat
nf_defrag_ipv4 1339 1 nf_conntrack_ipv4
nf_conntrack_ftp 6261 1 nf_nat_ftp
nf_conntrack 61584 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_state,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6
iptable_filter 1456 1
ip_tables 16946 1 iptable_filter
x_tables 16954 12 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_state,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype
snd_hda_codec_hdmi 23672 1
snd_hda_codec_realtek 60377 1
vboxdrv 1792262 0
acpi_cpufreq 5933 1
aesni_intel 43154 0
mperf 1267 1 acpi_cpufreq
snd_hda_intel 24053 4
aes_x86_64 7508 1 aesni_intel
ppdev 5902 0
aes_generic 26138 2 aesni_intel,aes_x86_64
ghash_clmulni_intel 4237 0
r8169 49354 0
i915 438164 3
video 11307 1 i915
i2c_i801 8180 0
i2c_algo_bit 5391 1 i915
drm_kms_helper 33051 1 i915
drm 208958 4 i915,drm_kms_helper
parport_pc 30765 0
intel_agp 10936 1 i915
mei 32152 0
psmouse 70792 0
pcspkr 1899 0
processor 26567 1 acpi_cpufreq
evdev 9754 6
button 4502 1 i915
intel_gtt 14047 3 i915,intel_agp
parport 31395 2 ppdev,parport_pc
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
serio_raw 4653 0
cryptd 8741 2 ghash_clmulni_intel,aesni_intel
coretemp 5654 0
iTCO_wdt 12813 0
mii 4123 1 r8169
iTCO_vendor_support 1929 1 iTCO_wdt
snd_hda_codec 94273 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
crc32c_intel 1987 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 2 snd_pcm
snd 58997 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
microcode 12185 0
ext4 424175 2
crc16 1359 1 ext4
jbd2 73919 1 ext4
mbcache 5977 1 ext4
usbhid 36430 0
hid 85285 1 usbhid
ehci_hcd 41154 0
usbcore 147533 3 ehci_hcd,usbhid
usb_common 954 1 usbcore
floppy 58615 0
sr_mod 14823 0
cdrom 35648 1 sr_mod
sd_mod 29239 4
ahci 20549 4
libahci 20023 1 ahci
libata 167611 2 ahci,libahci
scsi_mod 132942 3 libata,sd_mod,sr_mod
total used free shared buffers cached
Mem: 7900332 743308 7157024 0 34932 257560
-/+ buffers/cache: 450816 7449516
Swap: 15359996 0 15359996
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Jun 21 16:52:33 JST 2012: performing suspend
Last edited by remingtontonpon (2012-07-25 01:58:04)

In my case, monitor freezes too.
And I have only one PC, so i can't try ssh.
I logged into runlevel3 and try
sudo pm-suspend
and it works fine. So it seems this trouble caused only in runlevel5.
I also tried following command in runlevel5
# echo freezer > /sys/power/pm_test
# echo mem > /sys/power/state
# echo devices > /sys/power/pm_test
# echo mem > /sys/power/state
# echo platform > /sys/power/pm_test
# echo mem > /sys/power/state
# echo processors > /sys/power/pm_test
# echo mem > /sys/power/state
# echo core > /sys/power/pm_test
# echo mem > /sys/power/state
Everything works fine but sudo pm-suspend failed.
Last edited by remingtontonpon (2012-06-25 08:18:26)

Freezing after 20 min of use.

I use this Macbook Pro 2011 daily with 10.8.2 and with no real changes to speak of (ie installing software) i've started experiencing freezes after about 30 min of use.
Programs start becoming unresponsive
Beachball appears.
System freezes until restart.
No crash log as it doesn't actually crash just freezes.
I checked the log and saw that a geek tool couldn't find a file so i shut that down and restarted in case it was the cause. It happened again though and i copied this as the last few messages before i had to restart.
if anyone can shed light on what's suddenly causing this it would be greatly appreciated.
2012-12-10 1:41:26.436 PM com.apple.usbmuxd[91]: _handle_timer heartbeat detected detach for device 0x11-10.0.1.18:0!
2012-12-10 1:42:49.052 PM mdworker[641]: Unable to talk to lsboxd
2012-12-10 1:42:49.061 PM mdworker[642]: Unable to talk to lsboxd
2012-12-10 1:42:49.136 PM sandboxd[643]: ([641]) mdworker(641) deny mach-lookup com.apple.ls.boxd
2012-12-10 1:42:49.146 PM sandboxd[643]: ([642]) mdworker(642) deny mach-lookup com.apple.ls.boxd
2012-12-10 1:42:49.000 PM kernel[0]: Sandbox: sandboxd(643) deny mach-lookup com.apple.coresymbolicationd
2012-12-10 1:43:46.850 PM com.apple.usbmuxd[91]: _handle_timer heartbeat detected detach for device 0x12-10.0.1.18:0!

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Mail app freezes after first use on iPad 3 and ios 8.1. How to solve?

Apple mail app freezes after first use after reset. iPad 3 and IOS 8.1. How do resolve?

Hi, sixfinger.
Thank you for visiting Apple Support Communities.
Try forcing all applications to close and restart the device. Once this is done test to see if the Mail app functions correctly.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Cheers,
Jason H.

OS X freezes after Dropbox permission fail

Similar Messages

Maybe you are looking for