OS X Install DVD could not be used as a startup disk

When I click the Tiger install icon then click the restart button, I get the message, "Mac OS X Install DVD" could not be used as a startup disk. Please make sure the Mac OS X installation disk is in the drive."
Saw this post also from 6th Nov, but not sure if anyone had any ideas?
Thanks. Great forum.

With the Tiger installer disk in the Mac, reboot while holding down the 'c' key.

Similar Messages

After installing iTunes 10.5 update i get the following message when trying to play any song in my Library "The song could not be used because the original file could not be found. Would you like to locate it?" how do i fix this??

I have an iPod Classic and work on Windows 7.
i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
"The song could not be used because the original file could not be found. Would you like to locate it?"
what happened to all my songs (almost 2000) How can i get them back into my music library?
Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!

Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2

Recently got a new computer and installed itunes from external drive - all music shows up in the library, however when i click on a song i receive this message "the song could not be used because the original file could not be found". What do i do?

I recently got a new computer and installed itunes from which had been saved onto an external drive - all music shows up in the library, however when I click on a song I receive this message "the song "abc" could not be used because the original file could not be found". What can I do?

I was given the option to locate the file where the song is held. If so select "locate" and direct it to the folder / file where the song is and open it. itunes then will give you the option to use this process to update all of your library. OK that as this will do it automatically instead of doing them one by one. I hope this helps.
Martin

When i connect my ipad to itunes it says "this ipad could not be used because the required software is not insatlled.Run the itunes installer to remove iTunes,then install the 64-bit version of itunes."

When i connect my ipad to itunes it says "this ipad could not be used because the required software is not insatlled.Run the itunes installer to remove iTunes,then install the 64-bit version of itunes." I tried uninstalling and reinstalling itunes. so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work. Plz help. using itunes 11.5 and windows

so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.)

This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
Max

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

Photoshop Elements 10 Organizer wont open "DirectX is installed but could not be initialized. Reboot your system and relaunch Organizer"

All of a sudden, I go to open Adobe Photoshop Elements 10 and get this message in a box:
"DirectX is installed, but could not be initialized. Please reboot your system and relaunch Organizer."
Using Windows 7 Professional 64-bit, Office 2010 Home and Student on a Dell T3500 workstation with 3.20Ghz Xeon Processor, 12 GB Ram and a 2GB EVGA 650ti Boost graphics card.
The only thing I can think of since the last time I used PSE10 Organizer was the October, 2014 Windows updates were installed.
Any ideas anyone, Adobe seems fairly silent on this issue, and there is not much info out there on this for a Windows 7 Pro 64-bit system.
Please help.

All Windows OS updates installed, all Norton Internet Security updated daily.
Went to Microsoft to try downloading DirectX just in case that was the problem, and they say you already have the newest version.
Still receive the same message. I'm at a loss, not sure what to do.

I have a new computer that downloaded all of my playlist. but i cannot play all songs. i get a error that say "the song could not be used because the original file could not be found. would you like to locate it? but it does not help to resolve.

i installed itunes to my new computer and transfered all my playlist from the older computer. the software came with the new computer hp link up. the problem
comes in where i want to play a certain song on a playlist and this error pops up "the song could not be used because the original file could not be found.
would you like to locate it? which is of no help.
is there a solution to this problem?

The file path for these songs IS NOT correct per your iTunes Library file.
See: http://dougscripts.com/itunes/scripts/ss.php?sp=listmias for an Applescript to locate these files for re-adding.

It say "The VMware Remote Console Plug-in is not installed or could not be found" after installed VMware Remote Console Plug-in!

Dears,
I have installed VMware server 2.0.2 in Windows 7, everything is working but one thing not...
When I control my VM by VMware remote console, sometime It(VMware Infrastructure Web Access) tell me "The VMware Remote Console Plug-in is not installed or could not be found" even I have installed it many time.
What can I do?

The following workaround works on Windows for any browser.
(1) install the plug in. Never mind that it does not work.
(2) locate the executable vmware-vmrc.exe, this is typically in the following directory
"C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in"
(3) Obtain the virtual machine ID from the links for the VM in the web UI. e.g. the following is machine ID 192
https://servername:8333/ui/#{e:"VirtualMachine|192",w:{t:true,i:0}}
In IE you get these by selecting the link and then looking at its properties using right click.
If you are really keen and want to write something more sophisticated the VM ID codes seem to be in:
C:\Documents and Settings\All Users\Application Data\VMware\VMware Server\hostd\vmInventory.xml
(4) you can then create a COMMAND file or shortcut on your desktop (for the example above).
"C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in\vmware-vmrc.exe" -h localhost:8333 -M 192
When you use this link you will need to log in using the webui username and password, and it will start the VM if it is not running.
(5) I use the following batch file (I am old school), as an icon on my desktop. I have not tried, but it should work from ANO desktop provided the VRMC is installed on the client and the script uses the correct IP for the host.
Hope that helps someone and saves them the time I have just spent.
@echo off
:loop
echo.
SET X_line=----------------------------------------
echo %x_line%%x_line%
echo This 'force' loads the VMWare Console for the designated VM
echo Loading this console will force start the VM if not already loaded
echo You will need to know the administrator access username and password.
echo %x_line%%x_line%
echo.
echo fubar VM 1 = 112
echo fubar VM 2 = 192
echo fubar VM 3 = 368
echo.
:: SET /P variable=[promptString]
SET /P X_machine_id=Please enter the machine ID number:
echo.
echo CTRL-C to exit
SET /P x_confirm=Please confirm you want to start machine ID %X_machine_id%, Y or N:
if /i NOT {%x_confirm%}=={Y} GOTO :loop
PUSHD "C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in"
START vmware-vmrc.exe -h localhost:8333 -M %X_machine_id%
POPD
echo DONE
exit /b

Song could not be used because file could not be found

I recently had to purchase a new computer which came with the new Windows Vista. I had Windows XP before and from that computer I backed up ITunes on external hard drive. I have authorized this computer and installed Itunes and added the music back to folder. I can see all the music but I cannot play them due to the error song could not be used. I am having problems with the IPod and need to hook it up to computer to reset it. I am afraid it will mess up. What do I need to do? How can I get the music to play in library and if I hook up IPod will it mess it up more? Thanks for any help!!

I'm an Apple N00B and would be nice to see this answered (by Apple or someone that knows whats going on) - I realize this is a public forum, but in Googling "song could not be used because file could not be found" you (and me!) are not the only ones having this problem -
My situation is, that I BOUGHT a song from iTunes last night, it synched to my iPod OK - but in going thru iTunes today, I see the bang "!" next to the song... and not knowing all the icons yet for iTunes - it gives me that error - Saying it can't locate the song - would you (me) like to find it? - Yes, I BOUGHT it so would be nice to HAVE...
Point being, it IS on my iPod Classic - but is not on my PC??? How is this possible -
Furthermore - Since I bought it - and obviously I have it on my iPod now, but somehow is now "lost" on my PC (iTunes folder shows empty - for that song) - You'd think that either iTunes would be SMART enough to pull it from my iPod and save it to the folder (as the Album art shows in iTunes too???!) - Or that iTunes home page would recognize the "sale" and the "missing" song, and re-download it?? W-T-F Apple?
FWIW, for grins, I went back and tried to re-download the missing song - and was eager to SELL it to me again...
Again, I'm new to Apple and iTunes - so maybe there's a quick and easy fix for this - Yeah yeah - call me a Windows idiot - but suspect I'm not alone with this problem... or that it's not just a Windows issue -
Any thoughts?
TIA -
MFX
Message was edited by: MalteseFalconX

The Song ********* could not be used because the original file could not be

I recently had to re-install I Tunes.I then went to preferences / Advanced and entered my I Tunes library location. Now when I try to play music from I Tunes I get the message "The song ***** could not be used because the original file could not be found.Would you like to locate it? I know I could locate files individually but I have over 10,000 songs! Any help would be greatly appreciated.
Thanks,
Tiarahi

Have you found any help with this yet? I am having the same problem and I am ready to give up with Itunes completely. Thanks

Continually get pop up box "The song "song title" could not be used because the original file could not be found. Would you like to locate it?"

Continually get pop up box "The song "song title" could not be used because the original file could not be found. Would you like to locate it?"

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

I keep getting the song could not be used, please help!!

I keep getting the song "title of any song" could not be used because the original file could not be found. Would you like to locate it? It's on my hard drive and external hard drive, it even has the album art. What do I do? My last Ipod crashed and I had everything saved on dvds and hard drive, I know this is easy for most, but i'm new to this Ipod stuff. Please advise!!!
Thank you

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case. Either way with both paths I can give further advice.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Getting iTunes & Windows Media Player to play nicely.
tt2

On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
              Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
             I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                  ThanQ SO very much!
                                                                         [email protected] or [email protected] or [email protected] .
                                                                                           You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                            that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
                                                                                            hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                            as marking this page in my FAVORITES so I can find it fast! Take Care!!!

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

What does this message mean: This song could not be used because the original file could not be found--When I try to play songs there is an "!" next to it.

A friend recenlty replaced my hard drive.
When I try to use itunes--I receive this message: "The song could not be used because the original could not be found, would you like to locate it? Next to my songs I see this: "!" Help--Please!!

Well what happened is the pathname to the song has changed slightly.
For instance if the song was located say c\:Windows\User\Mary\Music\iTunesFolder
and now it's c:\Windows\User\MaryXray\Music\iTunesFolder
I'm assuming here your music was replaced in the Music folder like on the old hard drive, that iTunesFolder was simply copied over in whole.
So to fix things, you go into the iTunes Folder in your Music Folder and look for a iTunes Music Library .XML file and open it in a Text Program that has "find and replace" ability.
You find the partial pathname of the old drive and you replace ALL instances of it with the new pathname.
so \Windows\User\Mary would be changed to
\Windows\User\MaryXray
Save the file and reopen iTunes.

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"
I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page. It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following: "(file name) could not be used because the original file cannot be found. Would you like to locate it?" I click locate but do not know where to go from there? I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it. I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer. What to do??? Any help is much appreciated!!!

See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
tt2

OS X Install DVD could not be used as a startup disk

Similar Messages

Maybe you are looking for