OS X install failure, need suggestions

I just sold my mac mini on ebay, and I went to wipe my info and do a fresh install of Leopard. However, after formatting my drive with the zero writing security setting, the install fails. I've tried to install about 5 times, doing a fresh install. I've tried 3 times trying to recover from a time machine image I had on an external harddrive.
I considered trying to install off the 10.4 discs that came with the mini, but can't get the leopard disc out of the mini. I've tried, during reboot, holding down cmdopt+OF, holding down the mouse button, holding the eject button, and holding down F12. However, I'm not sure this is my biggest issue.
So I'm looking for suggestions of how to install with leopard or to remove the disc from the mini without taking it apart. The buyer i waiting for cofirmation of the shipping, and I'm too frustrated to think straight. Please help.
Thanks

Welcome to Apple Discussions!
First off you need to give the buyer the original installer discs. See my FAQ* on selling:
http://www.macmaps.com/selling.html
If you can't eject the disc, try connecting an Apple mouse to the machine and clicking on it as it restarts.
- * Links to my pages may give me compensation.

Similar Messages

ZCM Reporting install failure: Wrong OS

Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
Tim Wessels
Originally Posted by Craig Wilson
At this point in time, BOE is only supported on a 32-Bit OS.
Novell is working with Business Objects to get support for 64-Bit Platforms.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"deban0" <[email protected]> wrote in message
news:[email protected]...
>
> Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
> server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
> 10.1.1 x64. But I got the install message: Not supported OS. Is it true
> ?
>
>
> --
> deban0
> ------------------------------------------------------------------------
> deban0's Profile: NOVELL FORUMS - View Profile: deban0
> View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
>

INF Install failure for Windows 7

While tring to do Disc Cleanup I continue to get this error:
Error unregistering the OCS C:Windows\system32\20-20Technologies\3D Viewer\v5.0.94.0\2020Player_WEB_5_0_94_o.dllINF Install failure. Reason: Access is denied
I am using Windows 7 32 bit system. I cannot find anyone else with Windows 7 having this issue. Below are some of the thinkgs I have tried, but did not work. Any suggestions would be appreciated.
After click on start, run, open, msiexec/unreg I get this message (Windows cannot find 'msiexec/unreg'. )
I typed services.msc in the run box to see if Windows Installer is disabled. (If it is set it to manual). Mine is set for manual.
I tried downloading and installing this: support.microsoft.com/kb94228
Downloaded Windows Installer 4.5: go.microsoft.com/fwlink/?LinkId=120486
Got error: The requested operation requires elevation
I am at a complete lose to get this taken care of. Please help!!!

I was surfing the 'inter-web' on this issue [grin]
On the Major Geeks forum it said that COMBO Fix was the solution..
[quote]
Step
3:
Now we
need to use ComboFix to remove a bunch of malware files.
Make sure that combofix.exe that you downloaded while doing the READ &
RUN ME is on your Desktop but Do not run it!
If it is not on your Desktop, the below will not work.
Open Notepad and copy/paste the text in the below quote box into it:
Quote:
KILLALL::
DirLook::
C:\WINDOWS\system32\20-20
Technologies
FileLook::
C:\WINDOWS\inf\2020Player.PNF
Folder::
c:\windows\system32\512686
[Quote]
hth
pvm
PVM

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

Need suggestion

hi....i need suggestion on my problem.i've been given a complete atand-alone java application.my assignment is to make the system,a web-based system so that when we want to make a demo we did not need to bring an installer.just show to from the browser.i thought of using java web start.it's just my opinion.so,i want to hear others opinion......
Tq

Java Web Start is the solution I would choose. You must bear in mind that a browser is not enough to run Java Web Start - the client PC must have the correct version of the run-time environment (JRE) installed as a minimum - which, I think, is somewhere about a 10-15 megabyte installation.
The run-time environment for end-users is best/readily installed from the http://www.java.com site. Click the "get it now" button and away you go!
Alternatively, I think some PCs actually recognise when you've clicked on a JNLP link and automatically check your to see if you have a version of the JRE and download it if necessary - but I'm not 100% sure if this can be relied upon across all platforms/browsers...
I think you can also program your JNLP file as to where to look for the JRE installer (ie: maybe on your LAN instead of www.java.com), but I haven't researched that one yet.

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 3 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Suggestions? thanks.

Issue resolved with the help of Adobe Support (Mercer). My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
My fix was to delete the following empty folders from the Fonts Folder:
AdobeMingStd-Light.otf
BickhamScriptPro-Regular.otf
KozMinPro-Regular.otf
MyriadPro-BoldCond.otf
TektonPro-BoldCond.otf
And then re-run the installer (be sure to empty the trash).
My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those. Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

RMAN Recovery failing , Need Suggestion

RMAN Recovery is failing 3 times with these errors , need suggestion
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/20/2006 22:44:32
RMAN-03015: error occurred in stored script Memory Script
ORA-19504: failed to create file "/oradata/F3LIPO/system/tools_01.dbf"
ORA-27040: skgfrcre: create error, unable to create file
HP-UX Error: 2: No such file or directory
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of allocate command at 09/20/2006 23:12:27
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/21/2006 12:24:56
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested cancel of current operation

My concern is
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/21/2006 12:24:56
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested cancel of current

11g Install Failure, Listener Error.

11g Install Failure, Listener.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
The box is at present not networked and as is not on a domain. The computer name is homedb.
I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
Enterprise manager configuration failed due to the following error -
Listener is not up. Start the listener and run EM configuration again.
Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
When I click ok on the error message the install completes as normal.
I can TNSPING orcl which results in the following:
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
008 12:36:33
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)
I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
sqlplus sys@orcl and typing in the password I get the following error:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
This is also the error I get when using sql developer to connect to the db.
The extract from the log file mentioned above is as follows:
20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
My listener, tnsnames and sqlnet are as follows:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
Running the command: lsnrctl service, results in the following:
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
:52
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully.
Running lsnrctl status results in the following:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 20-JAN-2008 12:09:10
Uptime 0 days 0 hr. 40 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
ra
Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
The listener supports no services
The command completed successfully
I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
All firewalls and anti virus software have been disabled for the purposes of this install.
Do I need to manually register the listener with the database, if so how do I go about doing this?
I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

To answer my own question I fixed this by issuing the command
netsh winsocks reset
Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
Hope that helps,
Adam

Photoshop CS5 Install failure, but on just one instance of SL (the one I

HI, I know this is a strange place to post this, but Adobe Support suggests talking to Apple, as I have an install failure of Photoshop CS5, the install app won't even initialize, and it's just on one instance of SL. I can install fine on other machines, and other bootable drives, but not on the one inside an imac (late 2008 vintage). Baffling, as the problem must be tied to this one instance...my production one. I tried other users on the machine, but no luck...same problem. I checked permissions, ran Disk Warrior, all of that, still no luck. Anyone have any other suggestions besides using Gimp:) thx,
coocoo

I can see what's going on with the installer... first it's supposed to create a temp application dir in the user account, Adobe/OOBE/blabla... then kick off the activation and then the installer. Before it get's to the activation part, it blows and deletes the dir it started. As I successfully can install on another boot drive, I tried to cobble together the installation that way, by just copying files over, and got there - pretty much. I just can't activate with my serial number as I am supposed to be able to do...probably intentionally made so - but PS is running in trial mode on my production machine, and full mode on a test machine - ha! If I could just reverse the situation I would be golden. Anyway, I have another call in to Adobe...

RE: Install Failure

We have successfully installed the Forte 2.F.2.0 version on the NT
server 4.0. We have less number of services runnning on the NT server
and the NT server should be BDC instead of PDC for the better
performance. The installation on the NT server 4.0 has few other bugs
like, in the process of installation it will through a error message
saying that 'No program manager found' and it won't configure the
program icons properly.
Thanks
Raju
(630)-271-3357
[email protected]
-----Original Message-----
From: Todd Foster [SMTP:[email protected]]
Sent: Monday, June 02, 1997 11:26 AM
To: [email protected]
Subject: Install Failure
Has anyone else had a problem with installations?
I have an NT4 Server (service pack2).
I launch the setup.exe and the splash screen comes up,
a temp directory is decompressed, and then it's all over.
No Forte.
I've successfully installed on other NT station machines,
it seems InstallShield is getting some sort of 'red light'.
Any feedback would be greatly appreciated.
Thanks

Hi Matthew,
firrst of all: WELCOME TO THE DISCUSSIONS!
unfortunately you do not give us any information about your system. Please fill in your system's details in "My public profile" in the right sidebar of this page. We need to know as much as possible about your system in order to help (especially: exact type of Mac you use, current system version, RAM, 3rd-party cards)!
Before you start please confirm you have the retail full install DVD! You cannot use hardware specific disks that shipped with another computer.
Repair permissions cannot do it's duty without a bootable system installed. Therefore an empty partition is always grayed out.
Did you upgrade your firmware before you reformated: Mac OS X: Chart of Available Firmware Updates?
Make sure you format your disk as "Apple Extended (Journalled)".

Jre 1.6u7 install failure

Continuing install failures for jre 1.6u7 and 1.6u10(rc) on Windows, SP2. I have two users with desktop machines trying to install jre 1.6.07 for oracle discoverer. So 10 installs went ok, but 2 machines won't install/run jre 1.6u7 properly. They previously had installed jre's 1.4 and 1.5, various updates to those. Have uninstalled and installed 1.6 numerous times, but the java control panel will not open. Frequently the installer hangs on "Gathering Required Information". We kill the msiexec.exe, restart machine, add/remove the java, eventually install seems to run. But then, click on Start, control panel, java and nothing happens, control panel will not display. When we try to run our application, IE crashes. Original problem occurred with the install of the JRE 1.6 from the Discoverer server, download/install seemed to hang. Haved tried using the Windows Install Clean Up utility, have unregistered and registered windows installer service, have removed java and manually deleted registry entries for HKEY_LOCAL_MACHINE/Software/Javasoft. No obvious messages from the installer, nothing in java_install_reg.log, java_install_sp.log, java_install.log. Errors in Windows Event Viewer for Application for the conflict when we hadn't completed the previous install previously, but the reboot semed to get us past that.
Any ideas on how I debug this issue, why javacpl.exe won't run?
Thanks.

To clarify again, this is a runtime error rather than an install error.
If this is not obvious to the point of being annoying, I would think that it is your task to try and isolate what it is that makes those two machines different. Are all of your machines supposed to be mirrors of each other? I can understand that your request is driven by hoping for a hint of where to look on those machines for their relevant differences, but it strikes me as unlikely that we can provide a clue here.
You might want to start by just going to the Control Panels of a machine that works and a machine that does not work and looking for differences in install software. You suggest that they are all at SP2 and I would not expect this sort of problem to be service-pack related.
Is there a possibility that those two systems are corrupt (failing hard drive, virus, etc)? Is is possible to just clone a working system onto the two misbehaving ones? I realize that my response does not address a Java-specific issue, but you problem does not strike me as being specific to Java.

Pavillion dv6000: "Device driver" install failure for DVD/CD drive

The laptop does not install the DVD/CD drive anymore. Message says the driver for this device failed to install. It is not assigned a drive letter in Win Explorer. Device Manager shows the drive as recognized, but has the yellow triangle/exclamation point...Properties says driver is missing or corrupt. Needless to say, I know of no "driver" for a CD drive (in modern machines, at least), and nothing related shows up in the driver list on HP webstie for this laptop. I did reinstall the chipset drivers as well as some other driver updates; no change. Re-seating the drive didn't help.
I also replaced the original drive with another, and got the same result...driver install failure.
Any solutions?
Thanks

Yes you need to remove upper and lower filters from the registry. Microsoft has a KnowledgeBase article about it with an autofix, but I have had better luck manually editing the registry:
MS KB

Need Suggestion for Archival of a Table Data

Hi guys,
I want to archive one of my large table. the structure of table is as below.
Daily there will be around 40000 rows inserted into the table.
Need suggestion for the same. will the partitioning help and on what basis?
CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
LOAN_NUMBER VARCHAR2(10 BYTE),
LOAN_XML CLOB,
LOAN_UPDATE_DT TIMESTAMP(6),
JMS_TIMESTAMP TIMESTAMP(6),
INSERT_DT TIMESTAMP(6)
TABLESPACE DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
LOB (LOAN_XML) STORE AS
( TABLESPACE DATA
ENABLE STORAGE IN ROW
CHUNK 8192
PCTVERSION 10
NOCACHE
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOPARALLEL;
do the needful.
regards,
Sandeep

There will not be any updates /deletes on the table.
I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
After loading the data from original table to archived table i will truncating the original table.
If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month???

Remote Install Failure on AIA3.0

Hi,
Remote Install Failure on AIA 3.0:
AIA 3.0 installations on Windows XP-Pro is failing in Step 4 of 11 with the Error
"Node manager is down or the username and password entered is incorrect"
Details on the installation are as follows:
1) Installation is done on a Windows-XP 32 bit SP2, RAM - 4 GB.
2) SOA Suite 11gR1 PS1 and Weblogic 10.3.2 successfully installed.
3) SOA managed server, Admin server and node manager are running successfully on remote server.
4) The status of Node manager is reachable and has been confirmed through the admin console.
5) When installing AIA 3.0 use Remote Install option, the 4th step is failing after providing the node manager credentials of remote server.
Error message is "Node manager is down or the username and password entered is incorrect".
6) We given remote server configuration on 4th step (Host Name, Admin Port, Domain name, user/pass).
7) The Remote WLS Server is reachable.
8) Installer is always looking local node manager is not looking for Remote node manager which one is running on remote machine.
Error Log
Adding C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM for deletion.
Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/soawl.jar
Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/template.jar
null
configFileName:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml
osName:Windows XP
Inside startPreReqOperation...prereq
osName:Windows XP
diskSpaceRequirements from engine:Home id =SoftwareOnlyOraclehome name=Oracle home variable=%AIA_HOME_PATH% fixedSpace=2048 unit=MB condition=null totalSpaceRequired=0 isConditionSatisfiedfalse
entryPoint: entryPoint = oracle.installType.all condition = null className = null
contextFile:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\prereq\oui\agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
Expected result: One of 5.1,5.2,6.0,6.1
Actual Result: 5.1
Check complete. The overall result of this check is: Passed
Check Name:ServicePackChecks
Check Description:This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
Expected result: 2
Actual Result: 2
Check complete. The overall result of this check is: Passed
Check Name:TotalMemory
Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
Expected result: 1024MB
Actual Result: 3191MB
Check complete. The overall result of this check is: Passed
Property File location: D:\AIA3.1\New Folder\cd\Disk1\install\win32\aiaoneclick.properties
Item State: javax.swing.JComboBox[,170,52,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=AIA3]
Path: D:\Oracle11GPS\Oracle\Middleware_new\AIA3
Item State: javax.swing.JComboBox[,170,81,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=D:\Oracle11GPS\Oracle\Middleware_new\AIA3]
Home: AIA3
In processFieldStringAIA Home
In processFieldStringJAVA HOME
In processFieldStringAIA Home Path
In processFieldStringAIA Instance Name Contains invalid characters
getting root directory
D:\oracle11GPS\Middleware\user_projects\domains\dev_domain
truevalue for type of install
D:\Oracle11GPS\Oracle\Middleware_new\jdeveloper
D:\Oracle11GPS\Oracle\Middleware_new
*****Web Logic Home: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3
CLASSPATH: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3\server\lib\weblogic.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adapters.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adf-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\aqapi.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\bpelImport.log;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ccrQueries.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.comdev_6.1.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.config_6.0.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.common.security.api_1.0.0.0_5-1-0-0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.nodemanager.plugin_1.3.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\commonutils.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\connections.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\dms.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\engine.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\enginehelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb.xjc_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest-tasks.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-10.3.1.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-ant.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvesterSettings.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\install.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\jython-modules.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log4fl.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\message.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdbc5.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl-log4j.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneofftool.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soainstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soawl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\SysInfo.dll;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\template.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools11g.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\types.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlcipher.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlfullclient.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wtinstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xmlparserv2.jar;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstaller.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xmlparserv2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\share.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstallerNet.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emCfg.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraPrereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jsch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ssh.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\remoteinterfaces.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\http_client.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchactions.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchprereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchutil.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstImages.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_de.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_es.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_fr.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_it.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ja.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ko.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_pt_BR.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_CN.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_TW.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oracle_ice.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-swingaccess.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\swingaccess.jar;\;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-collation.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-mapping.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ojmisc.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\srvm.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\classes12.jar
1
localhost
LocalMachine
Connecting to Node Manager ...
<Apr 29, 2010 4:31:11 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Either the password and username entered are incorrect or the node manager is down
Traceback (innermost last):
File "<string>", line 1, in ?
File "<iostream>", line 123, in nmConnect
File "<iostream>", line 618, in raiseWLSTException
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : I/O error while reading domain directory
Use dumpStack() to view the full stacktrace
Anyone knows how to install AIA Remote Install on the remote SOA server?

Hi,
may be you enter the wrong username or password? Or there is a problem with certificate? The look file describe a wrong user name or password or nm is not reachable. Is it possible to start managed server via Admin Console? Please check nm log files.
Regards,
Marcel

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

OS X install failure, need suggestions

Similar Messages

Maybe you are looking for