OS X Leopard does not support SAN
Leopard has a problem with many SAN devices. If you ever eject a mounted network disk, it will never ever come back. Rebooting the machine, the network and the device will not help. It's gone forever.
If the server doesn't appear in the sidebar of the Finder, press Command-K to open the "Connect to Server..." dialog or select it from the "Go" menu.
You may also want to look at: Finder > Preferences > Sidebar and make sure "Connected Servers" and "Bonjour Computers" are selected.
Personally I have no problems connecting to any server or network volume.
Similar Messages
-
Leopard does not support reading/writing to SD card via network?
I have a Pixma MX700. I can read and write to SD cards using the card reader built into this machine ... IF I use Windows XP. Leopard will mount the card and allow me to view it contents but the minute I try to import a file to my iMac, I get error code 1401.
I've been told by Canon support that the new MP Navigator EX driver for Leopard disables reading from the memory card over a network. They claim Leopard does not support this function and reading the posts from others having the same issue using different multi-function printers, this would appear to be a Leopard issue, not a Canon issue.
Can anyone confirm this and/or offer a fix?
Thanks!Hi,
Could you check for SAP Note 1952701 - DBSL supports new HANA version number
Regards,
Gaurav -
I am unable to sync my iPhone4S iCal to my Mac iCal. Snow Leopard is my OS and it does not support the cloud. What do I do?
To makeuse of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table -
Front Row does not support Airtunes in Leopard
Can anyone tell me if I am just doing something wrong or if Leopard does not support airtunes in the new and improved Front Row?
I'm having the same problem, and it's a big one as one of the main uses for my Mac Mini is as a media centre controlling iTunes via the remote!
I think the root of the problem is that previously (on 10.4) Front Row launched and used iTunes in the background and so it respected whatever setting was current in iTunes.
It seems to now be using something else (maybe QuickLook) to play it - at least I haven't noticed the same delay when using Front Row when iTunes isn't launched...
This is something that needs to be rectified soon because one of the driving reasons for my upgrade was the 'new' AppleTV-like Front Row.
This upgrade has made my Airport Express useless and is tempting me to downgrade and ask for a refund - removing functionality is not a way to get new customers! -
I found out after the install of LION, that it does not support Rosetta, which runs Quicken and the classic AOL software and a myriad of other apps.
Can I go back to Snow Leopard? Is there a way to retrieve my thousands of saved E mails, which are saved on my Mac?
I still see the filing cabinet with my screen name but cannot get them to open.
Please help! Lion may roar, but the fact it does not support apps like quicken means it purrs.I had the Apple store wiped out my hard drive and I restore my last hard drive downloard by first placing Snow leopard DVD in the DVD drive and holding "C" when turning on the machine then I follow the instructions. I am back on snow leopard and trying out two finance software to replace Quicken for mac 2007. I am trialing Quicken essentials and ibank. They are both compatable with LION. So when I am ready will download Lion again. Also, Micorsoft Office needs to be 2011 version for it to work on Lion
-
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?
Boomba29 wrote:
I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?
Word Processing documents can be opened directly in Pages 4 (AppleWorks 6 only) but this is no longer available from Apple - the new Pages 5 (Mavericks required) does not open AppleWorks documents. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.) Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice has announced that it can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.
Draw Documents can be opened directly only in EazyDraw (the more expensive version from their website, not the cheaper one from the Mac App Store, and you will need v4.0 'Retro' not the most recent version) or Intaglio (though this appears not to be able to handle very complex drawings). LibreOffice will open simple Draw documents but I found it very unreliable with complex ones.
Spreadsheets can be opened directly only in the older versions of Numbers - the new version for Mavericks will not do this. The old version is no longer available from Apple. (Again, the older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Presentations can be opened directly only in the older versions Keynote; again, the new version for Mavericks will not do this. The old version is no longer available from Apple. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Nothing will open Database documents. You would need to export the data as ASCII and import it into another database program; you will lose your formatting and calculations will come over as the result, not the calculation.
This article examines 'abandoning Appleworks' in detail:
http://wilmut.uk/aw -
Apple Care registration page does not support Safari 3 for Leopard
I bought the apple care for my imac and was surprised to find Apple does not support their own browser for the online registration. I had to use firefox instead
Visit
http://www.apple.com/uk/support/register/
on your leopard mac and click continue.
I then got.
For the best experience, please use a supported web browser.
Mac:
- Safari 2.x
- Microsoft Internet Explorer 5.2 or later
- Firefox 1.0 or later.
Windows:
- Microsoft Internet Explorer 6.0 or later
- Firefox 1.0 or later.When you see this path: /Library That is your root Library.
Open a Finder window.
Select MacintoshHD in the Sidebar on the left then open the LIbrary folder then the Application Support folder, then InputManagers folder, the Receipts folder.
For this path: ~/Library/Application Support (your Home library)
The Tilde character ~ represents your Home folder.
From that same Finder window select your Home folder in the Sidebar. It has a small house icon. Open the Library folder then the Application Support folder.
Move all the Conduit/CT associated files you posted above to the Trash.
Try Safari.
I've yet to find the launchAgents.plist file in any Safari crash report in years. I don't think that's a problem.
Another way to find files on your hard drive is to go to your Finder.
From the menu bar at the top of your screen click Go / Go to Folder.
Example. Type in: /Library/ApplicationSupport click Go
Or type in: ~/Library/Application Support click Go -
I've just upgraded to Lion from Snow Leopard and to my surprise it does not support my 'Appleworks' application software. Ihave used Appleworks for all correspondence for six years and need to refer to the files (letters etc.) from time to time. Is my only option to revert back to Snow Leopard?
The reason appleworks no longer runs is because it is a powerpc based application. Since it's end-of-life in 2007, it was never converted to intel architecture, since it was dropped as a supported product. It continued to run on intel machines via rosetta, but OS X Lion formally discontinues all support for powerpc based programs. Powerpc based applications can only be run on OS X 10.6.8 or earlier releases (ones that still support rosetta).
So, it does sound like your best option is to move to iWorks' Pages now - otherwise you will be stuck with an increasingly more outdated operating system. And if you should buy a new machine, it would not run the older versions of OS X anyway, so at some point you have to leave appleworks behind and move on. Seems best to do it now, before Pages perhaps also moves forward to a point where it too may no longer support ancient file formats.
http://www.apple.com/support/appleworks/faq/ -
using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
Image cannot be rendered because Aperture does not support image format
Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One -
When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank youSee this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to). -
A box showed up that said "this architecture does not support Firefox 4." Firefox was no longer available on my laptop. Leopard is my OS. (Highest it will go)
Do you recall whether your iBook G4 could run Firefox 3.6? If so, you can download it here: http://www.mozilla.com/en-US/firefox/all-older.html
If you were using 3.5 or earlier, finding it is a bit trickier.
You probably want to backup your profile folder before uninstalling Firefox 4. See [http://support.mozilla.com/en-US/kb/Backing%20up%20your%20information Backing up your information | How to | Firefox Help]. -
IChat says, " This computer does not supporting video conference"
When i log in to iChat dan choose video preview, the window appears with sentence says,"This computer does not supporting video conference" in my Macbook Black with iSight camera built-in. Can anybody solve this ?
The same thing is happening to my brother's computer. He has a PowerBook G4 867MHz with 1.12GB of RAM. This barely meets the system requirements, but, nonetheless, I was able to install Leopard.
It says the reason I can't do a 1-1 video chat is because of a slow network, but it still says this even when I'm using the Bonjour buddy list on a local (54g only) network.
According to the knowledge base article (http://docs.info.apple.com/article.html?artnum=306687), there is no reason why he couldn't participate in a 1-1 video chat. -
IMac PC does not support latest Adobe FP/can't watch Youtube/Only solution=new computer??
I can no longer watch You Tube because the latest version of Adobe Flash Player
will not download to a PPC. I run Tiger 10.4.11 (I know that's ancient but it works
very well!) Does this mean the only way to view You Tube would be to buy a new
computer? Everything runs perfectly except You Tube. I've never been a big fan of the site
I still would like to have access to it but buying a new computer to get one site seems
like a bridge too far. I have Adobe flash Player and but not the latest version.
This problem only happened recently which seems strange. I even have a
couple of videos on the site and have access to my account. I can get the site and my account but
first the sound stopped playing a month or two ago but the videos still played. Now the videos
don't play at all. From what I've heard, only a computer with Intel can accept the latest version of
Adobe. Any thoughts or tips??It will work on a PPC Mac running Leopard, but not Tiger:
I am in the same boat. I run a G5 PPC iMac and I cannot watch flash videos on the BBC website or on BBC iPlayer, and it struggles on YouTube.
For reasons that passeth all understanding, they all work with the PPC version of Firefox, called TenFourFoxG5.app, once you have enabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the interesting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 11.5.502.55 in TenFourFox and it works just fine. Here is how to get a working version of Flash Player:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Maybe you are looking for
-
Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine th
-
I am getting Run time erros when i am generating report from my JSP page how should i resolve this issue. Thanks Srikanth
-
Report for non Domain computers
Is there a way to run a report for all computers not on a specified domain?
-
Automatic ROW Processing error after changing Schema
Hello all, I have an APEX 3.0 application referencing tables on a different schema from the parsing schema. Workspace A -> using parsing schema A1 Application A -> installed in Workspace A Application A -> access tables in schema A2 from schema A1, t
-
My and my sister's libraries merged?
I'm using Windows XP, so my sister and I have separate accounts. iTunes used to let us have our own libraries, but one day the two iTunes seem to have merged. If one of us tries to delete music, it deletes on the other account. Same with adding and e