OS X Lion: Fix for wireless not reconnecting when exiting sleep mode

http://www.tech-recipes.com/rx/18931/os-x-lion-fix-for-wireless-not-reconnecting -when-exiting-sleep-mode/

I have the same symptoms with a 2011 iMac and my Senheiser Bluetooth headphones.
10.7.3 did not correct this bug.
I'm also using MS Messenger and notification sounds are also buffered until the headphones are switched on.
I found other threads dealing with this bug :
https://discussions.apple.com/message/5962104#5962104
https://discussions.apple.com/message/12837199#12837199
http://apple.stackexchange.com/questions/26991/os-x-lion-mail-app-sound-effects- bug
https://discussions.apple.com/message/15856803#15856803
I'm currently trying the tip given in the last discussion :
"Success - in the Audio Midi Setup (Applications/Utilities) I changed the output to 2ch - 32bit Float and all the audio works well."
My headphones already had this setting, but internal speakers had 2ch - 24bit... is it a possible explanation ? Time will tell ...

Similar Messages

  • Phone not ringing when in sleep mode

    Over last few days have had problem with iPhone 4S not ringing when in sleep mode. I have just spoken to Apple support. I had do not disturb scheduled , but this was staying on all the time , which I hadn't realised. This is a fault which should be sorted by 7th Jan. hope this helps anyone else with same problem, as I did search this site first.

    This is the exact problem i'm having right now, I don't know why it's happening, but when i have it on the desk and when it's in sleep mode, I can get phonecalls and it won't ring but it won't show up as missed calls either, if i get a voice message i'll get it if i take it out of sleep mode and let it sit with full reception for a minute.
    I also lose all reception while in sleep mode.

  • Macbook not starting when in sleep mode

    So my white 13 inch macbook was in sleep mode for a couple hours and usually I just press either the enter/return button or the power/startup button to wake the computer but for the past two times, it wasn't starting up unless I held the power/startup button until it completely turned off. I then had to completely restart the computer. And that was the only way I could get it to turn on. In the past, like I said, everything worked fine when I hit the enter or power button. Has this happened to anybody else's macbooks? I guess from now on I'll pretty much always have to shutdown the mac completely when not using it.
    Message was edited by: Host

    HI,
    *"Will it wipe the hard drive? Will I lose files? What will change exactly*
    If you read the material at those links it explains everything. It's very simple. It won't wipe the drive or lose files.
    SMC: "As the name implies, it is responsible for power management of the computer. It controls backlighting, hard disk spin down, sleep and wake, some charging aspects, trackpad control, and some input/output as it relates to the computer sleeping."
    These are just simple trouble shooting techniques for sleep mode issues.
    Carolyn

  • Battery not charging when in sleep mode

    This might sound like a dumb question but, is it normal that my shuffle does not charge when computer is in sleep mode? It's been plugged in for the last 6 hours and the amber light is still flashing. Can I change the sleep mode on my computer? surely I don't have to be working at my computer for 4 hours every time I want to charge the shuffle. thanks
    G5   Mac OS X (10.4.3)  

    You can also change your SysPrefs so that the Mac doesn't go into Sleep when you don't want it to .... for example, when you want to charge the iPod. You won't lose much by doing this; it can still be set up to shut down the display and your hard drive.
    My own preference these days is to disable automatic sleep completely. If I wind up leaving for a few hours or an afternoon, I don't mind leaving it in the 'near sleep' mode that it goes into and even that happens only when I overlook putting it to sleep manually. You can do that with the remote, with the power button, or of course via the Apple Menu.

  • Phone does not ring when in sleep mode

    I have noticed that if I attempt to make a call to my phone when it is 'asleep', i.e. a few minutes after it auto locks, then it does not ring. When I 'activate' it by pressing the home button I see those calls appearing as missed calls. Any idea why this happens?

    This is the exact problem i'm having right now, I don't know why it's happening, but when i have it on the desk and when it's in sleep mode, I can get phonecalls and it won't ring but it won't show up as missed calls either, if i get a voice message i'll get it if i take it out of sleep mode and let it sit with full reception for a minute.
    I also lose all reception while in sleep mode.

  • Laserjet Pro 200 m276n fax not answering when in sleep mode

    Hi,
    We just bought a new Laserjet Pro 200 MFP M276n. When the device goes to sleep mode, it doens't recognise any incoming fax call. When the device is on, and someone tries to send us a fax, the device recognises the call, answers and receives the fax.
    We tried to update the firmware to the latest version but we still have the same problem.
    We use the original HP cables to connect the device to the line and when we tried to replace the device with a telephone cord, the phone rang normally. So I believe the problem is somehow on when the device is in sleep mode
    Can anyone help us?
    Thanks

    Hi @Fedias, 
    I understand that when the printer goes into sleep mode, it doesn't wake up to receive a fax. I can help you with this.
    Check the settings for the Wake Events on the printer.
    Go to setup, System Setup, Energy Settings, Auto Power Down, Wake Events, arrow down and select Fax Ring.
    This should wake up the printer when a fax comes through.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Sleep light not "pulsing" when in sleep mode

    Hey guys, i have a little problem with the sleep light... i don't know when this started, but i notice today, that when i put my macbook pro to sleep, the light just stays on and not "pulsing" like it used to do... is that normal?
    How can i fix this?

    This usually happens when you might have an application which is still running and is failing to quit. Check Activity Monitor for a list of all your processes.

  • Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

    Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

    Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

    We are trying to determine why alert boxes are not modal
    The fix states it's for Firefox 2.0 - 3.7a1pre
    We are using 3.0.6 not the current version of 3.6.13.
    Add-on release notes 2.16.1
    https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
    Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
    Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
    with respect to the window/dialog that issued the alert.

  • [svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

    Revision: 13257
    Revision: 13257
    Author:   [email protected]
    Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
    Log Message:
    Fix for @inheritDoc not working on a setter, but works on a getter
    QE notes: None.
    Doc notes: None
    Bugs: SDK-24727
    Reviewed By: Paul
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24727
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

    steabert wrote:
    Hi,
    I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
    The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
    options snd-hda-intel model=dell-s14
    I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

  • A Fix for Wireless Connection Problems

    I’ve been struggling with connection problems for a week. Thankfully, I found a fix. Your mileage may vary, but this may be your answer:
    Fix for Wireless Connection Problems on MacBook Pro

    Yeah BR, please tell me what your cure is. I have the same setup as you, Vista with the same wireless card you have. Cannot stay connected to the internet. Have spent hours on the phone with tech support and they can't fix it. I hate this f....ing computer, will never buy another one. Please let me know what you did. Once I get it running right I'm selling it and will buy a cheap Dell, never have any problems with them. I have keyboard problems, capital letter problems, connection problems, and download can take 1 to 2 days. Pure BS!!!!!!!!!!!!!!!!!

  • [svn:fx-trunk] 12962: Fix for ASDoc not saving event type for [Bindable] metadata tag

    Revision: 12962
    Revision: 12962
    Author:   [email protected]
    Date:     2009-12-15 10:32:23 -0800 (Tue, 15 Dec 2009)
    Log Message:
    Fix for ASDoc not saving event type for metadata tag
    QE notes: None.
    Doc notes: None
    Bugs: SDK-24706
    Reviewed By:Corey
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24706
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Which correspondents fine with the
    device "hw:0,3"
    in my mpd.conf alsa section.
    Also sound worked fine withh this config before I started installing ffmpeg-svn and alikes
    hokasch:
    I tried changing the mixer to "Master" but that did not change much.

  • [svn:fx-trunk] 10230: Fix for ASDoc not handling img tag correctly

    Revision: 10230
    Author:   [email protected]
    Date:     2009-09-14 08:54:44 -0700 (Mon, 14 Sep 2009)
    Log Message:
    Fix for ASDoc not handling tag correctly
    QE notes: None.
    Doc notes: None
    Bugs: SDK-22902
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22902
    Modified Paths:
        flex/sdk/trunk/asdoc/templates/asdoc-util.xslt

    Welcome back everyone.
    Hope you all had good holidays.
    Cheers
    glenn
    tinylion development & design

  • When running lion 32bit my wireless works great, when I run lion in 64 bit the wireless works awful. Any ideas?

    When running lion 32bit my wireless works great, when I run lion in 64 bit the wireless works awful. Any ideas?

    I solved my own problem. Found spotlight in Lion 7 doesn't seem to like third party external drives and gets hung up and unmounts the drives. Had to go into the spotlight preferences and choose all my external drives to not be searched by spotlight.
      Temporary fix but would love to see apple address this issue in the next version of Lion.

  • [svn:fx-trunk] 12685: Fix for RTE in VideoPlayer when trying to capture bitmaps.

    Revision: 12685
    Revision: 12685
    Author:   [email protected]
    Date:     2009-12-08 19:23:32 -0800 (Tue, 08 Dec 2009)
    Log Message:
    Fix for RTE in VideoPlayer when trying to capture bitmaps. Put try-catch block around bitmapData.draw() and use a Rectangle if it throws an error. Also, added some documentation in BitmapUtil for getSnapshot since it may throw the same type of error.
    QE notes: No
    Doc notes: No
    Bugs: SDK-24574
    Reviewer: Ryan
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24574
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/HighlightBitmapCaptureSkin .as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/BitmapUtil.as

Maybe you are looking for