Os x lion not installing with recovery partition

I have Macbook Pro latest one 2.3 intel core i5 my os lion got crash n i try to reinstall it with recovery partition but when i connect it with wifi n start installation its getting error again n again ....!!

We can't tell Apple to allow your machine to download Lion, you will have to call them yourself.

Similar Messages

Mountain Lion not installing from Recovery HD

Ok so I want to restore my mac so I enter Recovery HD and when it's erasing Macintosh HD, I go to reinstall OS X, so I continue, agree to the terms and conditions, select my disk, and sign in into my iTunes account and then nothing, I try hitting install again and again sign into my itunes account and then nothing happens and this just keps going on. I tried restarting more than once, I also tried booting into my Time Macine and almost the same thing happens, I boot back into Recovery HD and try again but again nothing. Keep in mind that I downloaded Mountain Lion 3 times before plus the one more time that I restored so I guess maybe making that 4 times. I dont think I exceeded my maximum downloads since I didn't get a message telling me that or asking me to buy it another time. Keep in mind that I don't have access to another mac and that I don't live in the USA or any country with apple stores although I can go to an apple authorised reseller however my warranty is over. I was thinking of buying a Lion USB thumb drive and booting into that and installing Lion but will that work since my recovery HD is on Mountain Lion. GUYS URGENT HELP PLEASE!!!!!!!
And I also can't restore from time machine since I don't have a full system backup.
Thanks in advance!!!
MacBook Pro 13inch Early 2011.

Now when I go to Reinstall OS X, I get this message:
"Could not write installation information to disk.
please contact applecare"
Almost exactly that message
Help Please

Mountain Lion not installing - With VirusBarrier X6

I was having lots of problems trying to install Mtn. Lion but was able to install other apps and updates. I just couldn't figure it out! But with lots of support from Apple and searching around I was able to get it to work. I wanted to share to help everyone out!
First off, this only works if you have VirusBarrier X6 (VB)!
1) Open VB and click the tab "Surf"
2) Under "Surf" click "Ad Banner Filter"
3) Turn this OFF
4) Now turn OFF the computer.
5) Holding SHIFT, start the computer WHILE STILL HOLDING shift DOWN.
This will put the computer into Safe Mode. Safe Mode will clear certain Cache files that a user would not be able to normally to clear.
6) Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
7) Log into your account.
8) Now restart the computer NORMALLY.
9) Go into App Store and you should be able to download Mountain Lion.
I hope this helps!!

You can try this link, it worked for me:
http://support.intego.com/entries/21776831-mountain-lion-download-errors
The last one was what did it, moving the preflight.pfpgk to Trash

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

I'm getting the following error message when attempting to invoke "Find My Mac"
Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.
If you don't have a current backup, you need to back up before you do anything else.
You have several options for reinstalling.
1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

HT204053 hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

Weird problems with recovery partition

Hi. I just got a new X1 Carbon a few days ago. When trying to install Ubuntu, I messed up the bootmgr. At that point I still had the option F11 for recovery on startup, but choosing it did not give any results and after a restart, the option was gone. When researching the problem, I found this thread:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Need-help-with-recovery-partition-create-recov...
Since my recovery partition Q was untouched, the steps described in the thread allowed me to restore partitions S and C. So far so good, but now the problems start.
First, the letters of the partitions get messed up after every reboot. I assign Windows7_OS the letter C, SYSTEM_DRV gets S, and Lenovo_Recovery gets Q. Diskpart then lists the drives with correct letters. But after a reboot, they're back to D,C,E, respectively.
Then, when I boot the Windows recovery disk from a usb stick, it correctly recognizes that Windows is installed on drive D. It suggests that there are startup problems, which I tell it to fix. After the next reboot, it does not warn me about startup problems. When I then go to command prompt and enter
bootrec.exe /fixmbr
bootrec.exe /fixboot
then the Windows recovery disk commits suicide. It seems to attempt to fix its own bootmgr. At the moment, both usb stick and hard disk run with grub (Windows recovery on a multiboot installed by YUMI). After I run the commands above, the hard disk still runs with grub, but the usb stick now has bootmgr and fails to boot. I have tried this several times, each time recreating the Windows recovery disk with YUMI, and every time the same result.
F11 option is of course still gone. At this point I'm out of my wits. Any suggestions are welcome.
Solved!
Go to Solution.

In the end I formatted and made a clean install. F11 Option is gone. Recovery partition is still untouched, but I don't think it will be used again. Followed this advice to install a fresh Windows 7 using a usb stick:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html#post1839164
Since I did not have access to Windows with administrator rights, I had to use Ubuntu to create the bootable Windows stick:
http://cloud101.eu/blog/2012/03/24/create-a-windows-7-live-disk-from-ubuntu-linux/
The WiFi driver was not included in Windows, so I had to download that in another system, and install manually. From there I could then go online in Windows to download the remaining drivers from Lenovo (after the clean install there's a long list of unrecognized devices).
Since the laptop comes with 4 primary partitions preinstalled I had to merge the SYSTEM_DRV and the Windows7_OS partition in order to create an additional partition for Ubuntu. Then I installed Ubuntu and took control of the startup behavior using EasyBCD.

SP3 not installing with Snow Leopard

I've been trying to reinstall Windows XP partitioned on my new mac along with Snow Leopard. The Service Pack 3 will not install with the XP and many errors pop up. I do have SP2 installed and windows is running fine except when trying to update the software to SP3.
On 10.5, I could install the SP3, but had to add a bit of code as per this url: http://www.windowsreference.com/general/error-there-is-not-enough-disk-space-whe n-installing-sp3/
Any thoughts or solutions, please?

I think I just found the solution:
http://support.apple.com/kb/HT3841
I'll try it and hope it works.

Apple Mobile Device Suppurt not installing with iTunes 10.6.3

Hey guys, any help with this would be much appreciated., I had an issue a couple of days ago where I couldn't reinstall the latest itunes (10.6.3) I have now managed to install this current version but with one major problem, Apple Mobile Device Support didn't install with it. I tried everything, I've tried uninstalling itunes and reinstalling it again with and without the anti virus turned on, I've tried a system restore, I've tried using an old version of Apple Mobile Device Support, and still nothing.
My itunes keeps saying this whenever I plug in my iPad, "This iPad cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes" I've done that, it didn't work, however, itunes has managed to install successfully on my desktop pc, which is Windows XP, with apple mobile device support, but the machine I'm having trouble installing itunes with Apple Mobile Device Support on is my Laptop which is running Windows 7. I doubt this is a problem with my laptop, the system restore I did confirmed that, and the issue only returned when I tried reinstalling the latest itunes.
Is this problem with Apple Mobile Device Support not installing with the latest itunes a bug? i hope so, because I've read up ways to solve this problem but alot of it gets too technical and I'm not the most technical person when it comes to computers and all that.
Is anyone else having similar problems, if so, how did you solve it?
Thanks, hoping to hear back soon

I've also read somewhere about using Win Rar to extract files to do with apple mobile device support from the itunes installer file, would you recommend that to? I don't really fancy the idea of doing anything that involves my registry because knowing me I'll end up screwing my laptop up for good lol
It's a little more involved than just doing a standalone AppleMobileDeviceSupport64.msi install, I'm afraid. The relevant drivers in AMDS are not digitally signed for 64-bit XP, so you have to force XP to accept a driver install that it would try its damnedest to not do. There's no driver issues for other 64-bit componentry in the installer package (I think the GEAR drivers install on XP 64-bit systems), but I believe there's still a bit of fancy footwork involved in getting them installed too ... although it's been a long time since I've looked at an instruction set, and I might not be recalling those things correctly. (So if you're not comfortable with system modifications, it might be best to steer clear of the Orca-based techniques ...)

HP Lazer Jet Pro 200 not installing with Windows 8 64 bit

My brand new HP Laser Jet Pro 200 MFP M276mw is not installing with my brand new Acer One725-0487 Netbook that has the Windows 8 64 bit operating system. I bought them both at Office Depot this week. I downloaded the software of HP.com/support and when I go to setup the wireless function (Loading from the Acer to the printer) it takes a long time and gets to 99% complete and then has a terminal failure (two times).
Can someone please offer some advice on how to get past this. Thanks very much, Mark

MarkVanWho,
I am glad you got it all resolved. Let us know if you run into any other problems Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

CNA 6 InstallShield Wizard will not install with a JVM not found message

I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?

When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748

Pixel Bender did not install with CS4 on Win7 64. Downloaded toolkit, message "installer failed to initialize"

Pixel Bender did not install with CS4 on Win7 64. Downloaded toolkit, message "installer failed to initialize"
What should I try next?
Thank you, and happy Holidays!

What I had installed was CS4 Desin Premium on Win7 64 bit. Pixel bender seems to be installed, but nothing happens when I launch and it doesn't show in Photoshop 32 or 64...
Thanks

Hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

Read this
http://support.apple.com/kb/HT1808?viewlocale=en_US

Problem with Recovery Partition(After i got a Virus)

Hi all,
I am using HP Envy 15 notebook with windows 7 home premium x64-bit installed.I didnt create the recovery disks since i got this notebook and what happened is that i got a virus from the internet but i almost repaired all system faults caused by it but the main problem for me is that it change all main drive folders name into Virus1232 for example (d:\recovery changed into d:\virus1234) and i spent hours over the internet to get the right folder and file names and i got them all but only one file not sure of.My problem is when i enter the Recovery Manager it doesn't detect any my recovery partition(but the virus isnt responsible for any file deletion it just caused some system changes) and just to speak i also corrected the folder and file names in c: drive since they are needed too.
These are the filenames i got in D: drive : bootmgr - BT_HP.flg - CSP.DAT - DeployRp.log - HPSF_Rep.txt - language.ini ; and the filename let is the one im not sure of: "HP_WSD.dat" (it is a zero-byte file).
The recoverymgrdump.txt works right untit "CSBRMgr::GetRPTOOLPartIndex leaving!"
then it tells me :
"Win32 System Info Code = 3, Info Message = The system cannot find the path specified."
and it also say :
"CSBRMgr::HpcdFlgIsExistInUP <UP>:\WINDOWS\hpdrcu.prc does not exist."
I dont know if that is normal but also the deployrp.log gives me this error:
"Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab"
ofcourse there are more errors in both files but i guess those are the most important.
So my question is: could the file attributes in d: drive be responsible for this error(i changed all attrbutes to be system hidden and read only)
OR
If anyone have a solution please tell me what to do.
Thanks.
This question was solved.
View Solution.

You are best to order a set of Recovery discs from HP, doi a full recovery using those.
You can order recovery media here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
Or call HP on the phone to order a set.
USA
http://welcome.hp.com/country/us/en/contact_us.html
Everywhere else
http://welcome.hp.com/country/us/en/wwcontact_us.html

Reinstall lion due to missing recovery partition?

Dear Apple Community,
Here is my situation: I have a 3-partioned drive inside my iMac. One has Lion installed, one has SL, and another is an empty partion. Unfortunatly, there is no recovery partition installed on my computer. While I am fully aware that you can boot from an internet connection and run Installation/Utility services remotely from Apple's servers, I'd like to install a local recovery partition for more convience and peace of mind, should anything go wrong in the future.
How can I reinstall Lion without losing my data? I currently keep up to date Time Machine backups on an external drive. Can I run the "Install Lion" app to easily recreate the Recovery Partition? Would I have to wait 6 hours while I Reinstall Lion, then do a Time Machine Recovery?
Just wondering if I could get some feedback on the best move here. I know there are a couple of options. Thanks for any help!

You can reinstall Lion right over the top of the current install and not lose any data on your computer.
But I'm not sure that will recreate the recovery partition. It should I'm but I'm not sure it it will.
Have you run Software Update? it has been my experience that if the recover HD is not present SU will see that and download the correct files to recreate it. Buit again this was on my MBP when I did a reinstall of 10.7.1.
If you choose to do the reinstall make sure you SAVE the downloaded files and create your own Lion Install USB Thumb drive for future use.
There are instructions all over the net to do this and I have been using a nice little program to create the USB drive. The program is called LionDiskMaker, it works very well for this.

Lion restore w/out recovery partition or discs?

I just purchased my first Macbook. A used mid 2009 15". I am new to Mac computers. It did not come with any discs and there is no recovery partition either.
I am wanting to restore the whole system due to the previous users leftover stuff still there. I do not care about saving any information that is currently on the computer.
I have tried the Recovery Disk Assistant on a thumb drive and have attempted the Internet Recovery however from what I understand, without the recovery partition, both of these options will not work and neither one has worked.
What is the best way to go about restoring? Will upgrading to Mountain Lion via the App Store give me the option to, or automatically create, the recovery partition? (then I can do a restore from one of the previously mentioned ways) Or do I find a friend who has some discs laying around that I can use?
Thanks for the help!

HI eddieleon7pc:
Thank you for you query. I am glad to be able to help!
I understand that you are getting a hard disk not found error when trying to boot. I am sending you documentation on "Resolve Boot Device not Found Error Message" click here. You mentioned not being able to to boot to a usb drive. Here is a link to "Configuring the Boot Order in the System BIOS" click here.
If you require further assistance would you please provide your model number and what operating system you are running. "How Do I Find My Model Number or Product Number?" click here
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Os x lion not installing with recovery partition

Similar Messages

Maybe you are looking for