OS X Mail long lines of text don't re-flow
Using Mail in OS 10.4.11 when I receive emails from some clients they include disclaimers etc. which do not re-flow to the width of the email window. Consequently when I print the email the whole of the long line is fitted across the page making the text of the message too small to read. Even changing the page orientation doesn't make the text readable. Anyone have any suggestions?
To add more; I first noticed this 2 days ago and reported it to Apple. When I did notice it, I went to preferences and changed how many lines of the content preview shows, then I closed the message view column and expanded the preview column as wide as I could get it. On one of the messages, it kept continuing after it ran out of space in the preview, for a running total of at least 100 words. Even then, in the actual message viewer, it only showed 1 complete message of about 25 words.
Similar Messages
-
Sending/receiving email with long lines of text.
Using mail with yahoo plus. Composed emails have long lines of text. Recipients complain that they have to scroll left to right to view them. Not so on a PC with Outlook, anyone know of a solution to this. Thanks
Hi Chris,
Thanks for the response. No, there were no rules set, but your query gave me ideas. I'd never been in the rules section before, but I played with it for a while with some trial and error and finally made a rule that set all the emails to show with black text, and duplicated it for all the mailboxes, and voila! there were all the emails listed in black text.
While I'm sure there are more effective ways of writing a rule, my rule worked fine. I had it say that if "any" of the following conditions are met: "From" "Contains" "@", perform the following actions: "Set color" "of text" "Other [black]" and applied it to the mailbox.
Thanks for the spark of the idea.
Gail -
How to read long line from text file
Hi,
I just faced problem when reading a big text file.
BufferedReader br = new BufferedReader(new FileReader("D:\\afile.txt"));
String str;
int i;
while ((str = br.readLine())!=null)
i++;
//do some work here...
...This code throws exception:
Exception in thread "main" java.lang.OutOfMemoryError: Java heap spaceSo I thought file line is very long. When I opened it in FAR it only displays no more than 4096 characters as a line.
Help me to read a text file that's line is very long?try,
$ java -X
-Xmixed mixed mode execution (default)
-Xint interpreted mode execution only
-Xbootclasspath:<directories and zip/jar files separated by ;>
set search path for bootstrap classes and resources
-Xbootclasspath/a:<directories and zip/jar files separated by ;>
append to end of bootstrap class path
-Xbootclasspath/p:<directories and zip/jar files separated by ;>
prepend in front of bootstrap class path
-Xnoclassgc disable class garbage collection
-Xincgc enable incremental garbage collection
-Xloggc:<file> log GC status to a file with time stamps
-Xbatch disable background compilation
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
-Xprof output cpu profiling data
-Xrunhprof[:help]|[:<option>=<value>, ...]
perform JVMPI heap, cpu, or monitor profiling
-Xdebug enable remote debugging
-Xfuture enable strictest checks, anticipating future default
-Xrs reduce use of OS signals by Java/VM (see documentation)
-Xcheck:jni perform additional checks for JNI functions
The -X options are non-standard and subject to change without notice. -
Mail Subject Line Automatically Selects All Text When Typing
In Mail I'm typing along in a subject line and randomly the all of text I've entered becomes selected. Then my next keystroke deletes the first entered text. Very frustrating, and I can't figure out why this happens. Maybe OSX's spell checker? How do I turn that off to test?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
How to print a text file with long lines?
I am trying to print a text file which contains many long lines. I find that the long lines are truncated on the printouts. How do I wrap up these long lines? Could you give me some examples?
Thank you very much!Here's an example. The "\n" makes anything after it go to the next line. I hope this helps. Look at the Private void getTable() section.
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class LabNine extends Frame implements ActionListener, WindowListener {
private TextField txtInfo;
private List lstInfo;
private Button btnAddInfo;
private BorderLayout borderlayout;
private Connection databaseConnection;
Statement statement;
ResultSet resultSet;
public LabNine( ) {
super("Lab Nine");
// addWindowListener to close application
addWindowListener(this);
// create layout
borderlayout = new BorderLayout();
setLayout(borderlayout);
// create text field so the file input that is selected will be seen in here
txtInfo = new TextField();
txtInfo.setEnabled(false);
Color color = new Color(255, 136, 183);
txtInfo.setBackground(color);
add(txtInfo, BorderLayout.NORTH);
// create list so the file input can be populated in here
lstInfo = new List();
add(lstInfo, BorderLayout.CENTER);
// create button to add selected input file in the text field
btnAddInfo = new Button("Add Info");
btnAddInfo.setBackground(Color.cyan);
btnAddInfo.setFont(new Font("TimesRoman", Font.BOLD, 16));
btnAddInfo.addActionListener( this );
add(btnAddInfo, BorderLayout.SOUTH);
// set frame attributes
setSize(450, 250);
setResizable( false );
show();
// get the table/ get the query
loadConnection();
getTable();
public void actionPerformed(java.awt.event.ActionEvent e) {
// if add button is pushed then it will check to see if an item was selected.
// if not, then an error message will be displayed else the selected item will be in the text box
if ( e.getSource() == btnAddInfo ) {
if ( lstInfo.getSelectedIndex() == -1 ) {
System.out.print( "You have not selected an item" );
else {
txtInfo.setText(( lstInfo.getSelectedItem() ));
private void getTable() {
try {
String query = "SELECT FIRST, LAST, EMAIL FROM Names";
statement = databaseConnection.createStatement();
resultSet = statement.executeQuery( query );
while ( resultSet.next() ) {
lstInfo.add( resultSet.getString( "FIRST" ) + " " + resultSet.getString( "LAST") + " " +
resultSet.getString( "EMAIL" ) + "\n" );
statement.close();
catch ( Exception e ) {
System.err.println( e );
private void loadConnection() {
// define the data source for the driver
String sourceURL = "jdbc:odbc:people";
String username = "";
String password = "";
// load the driver
try {
// load the drive class
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
// create a connection through the drivermanager
databaseConnection = DriverManager.getConnection( sourceURL , username, password );
catch( ClassNotFoundException cnfe ) {
System.err.println( cnfe );
catch( SQLException sqle ) {
System.err.println( sqle );
public static void main(java.lang.String[] args) {
LabNine aLabNine = new LabNine( );
public void windowActivated(java.awt.event.WindowEvent e) {
public void windowClosed(java.awt.event.WindowEvent e) {
// closes the application
System.exit( 0 );
public void windowClosing(java.awt.event.WindowEvent e) {
// closes the application
System.exit( 0 ); -
When using the "Fill & Sign PDF" feature, is there a way to stretch to size the text box on a specific area of the page...instead of the text box going on in one straight long line....? I'm not seeing there's an option or ability to do so, just wanting to confirm.
Improving the handling of multiple line text fields is in our plans, but for now, you will have to add manual carriage returns (Enter).
Thanks,
Josh -
I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?
If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter -
Does anybody know a way to apply a prefix to lines of text (such as e-mail:, contact:, fax:)?
Does anybody know a way to apply a prefix to lines of text (such as e-mail:, contact:, fax:) without manually entering the prefix a million times or copying and pasting for each instance? Is there any way to automate this utilizing style sheets or something? It is for a directory with tons of entries. Any advice would be appreciated. Thanks.
st
mikey_design wrote:
Does anybody know a way to apply a prefix to lines of text (such as e-mail:, contact:, fax:) without manually entering the prefix a million times or copying and pasting for each instance? Is there any way to automate this utilizing style sheets or something? It is for a directory with tons of entries. Any advice would be appreciated. Thanks.
If each of the special prefixes corresponds to an identifiable field in the source text, such as a database file or spreadsheet, the text prefix can be added by programming the database, or creating a calculated column in the spreadsheet. To format the prefixes separately from the text that follows, use a nested character style, or a GREP style within the paragraph style; both a nested style and aGREP style need some kind of identifiable pattern to detect where to begin and end the prefix style.
Search Google for terms like "InDesign data merge," "InDesignGREP paragraph style," "InDesign nested paragraph style," and similar terms for more information on these topics.
InDesign's Data Merge has some ability to close up the blank lines when a data field is missing, depending on the layout. One example is when some addresses require two lines, but others require only one line.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
How wrap long lines in incoming mail
Some email arrives with VERY long lines, and so are clumsy to read. Is there a way to cause TB to wrap them to a specified length?
I thought that that point might be raised [hoped it wouldn't], and yes, if I were sending these instructions to the average user I'd do exactly that. In this case, the recipients are likely not skilled enough to deal with attachments and possibly not equipped to open them.
Really, having created a formatted document in another application AND then wanting to copy it intact into an email, you'd think there'd be a reason.
"Yours is not to wonder why; yours is but to do or die" [answer or die :D]
And this part of the discussion wouldn't even have to be had if the rewrap advice were given as 'text wrapping in plain text emails' [careful, this deletes your formatting and images]. I found out the hard way that the rewrap wouldn't help with html.
Incidentally, anyone creating content in Word or similar might consider pasting it into an html editor and checking for the presence of non-breaking spaces ( & n b s p ; ) that stymie line wrapping. -
Once firefox completed its upgrade I can no longer access my text window/box in my yahoo mail account. Which means I cannot text from my mail account now. I cant figure out why this is happening.
Once firefox completed its upgrade I can no longer access my text window/box in my yahoo mail account. Which means I cannot text from my mail account now. I cant figure out why this is happening.
-
I don't want a new row for each line of text
I have exported a pdf document which is a table full of text in columns (by month). The conversion seems to react randomly so that in some places several lines of text in a column are converted to just one cell (great, just what I want) and then in others, a block of text gets split into a row for each line of text --- very annoying ...
What would make this happen? Is there a workaround so that you can tell the conversion how to react to blocks of text?
hope someone can helpFor optimal export the PDF needs to be a well-formed tagged PDF.
The basic PDF page content has no format, styling, rows, columns, etc.
Just objects painted to the PDF page at a specified location.
You can return to the authoring file, clean that up to support accessible PDF output, then post process the PDF with Acrobat XI Pro to finalize making the PDF PDF/UA compliant. Export of that would be better.
You can manually tag the PDF such that it is PDF/UA compliant than export from that . This would provide you better export.
You can clean up the export you already have.
Be well... -
The headings and subheadings on some (but not all) sites bleed together into one line of text or the text appears but all or partially outside of the box in which it is intended to reside. I have this problem with MSNBC, for example. The headings at the top of the webpage (TODAY, for example) combine with the next line of subheadings (World, for example) after appearing separately for 1 or 2 seconds. At the same moment, a message appears saying that Firefox has prevented the page from automatically reloading. When I respond to that message by clicking the Allow button next to the message, Firefox appears to reboot the web page and the same message of preventing automatic reloading reappears. I experience the same problem with the New York Daily News website and some others but with other websites such as the BBC I experience no problem.
The headings and subheadings on some (but not all) sites bleed together into one line of text or the text appears but all or partially outside of the box in which it is intended to reside. I have this problem with MSNBC, for example. The headings at the top of the webpage (TODAY, for example) combine with the next line of subheadings (World, for example) after appearing separately for 1 or 2 seconds. At the same moment, a message appears saying that Firefox has prevented the page from automatically reloading. When I respond to that message by clicking the Allow button next to the message, Firefox appears to reboot the web page and the same message of preventing automatic reloading reappears. I experience the same problem with the New York Daily News website and some others but with other websites such as the BBC I experience no problem.
-
Bug: text editor doesn't show scrollbars on very long lines
i'm sending a test json message to a class, which means that i have a super long line of content (easily 15k chars). for whatever reason, the horizontal scrollbar won't fire, which means that it gets clipped to the window with no way to move right. even moving the cursor with the keyboard won't advance it. looks like i broke something
Ballistic,
Can you please file a bug at http://bugs.adobe.com/flex/ and include your project or a simple test case showing the issue.
Thanks,
Peter -
I just updated to 10.9.4 and all my mail accounts are now offline. Unable to send or receive mail. nothing else was done except for updating to 10.9.4
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Document line item text in Clearing document
Dear All,
Document line item text
My client want the vendor invoice line item text(BSIK-SGTXT) to be captured in the corresponding clearing document line item text field(BSAK-SGTXT).
(i.e) The vendor invoice and its payment clearing document should have the same text in the document line item text filed.
According to me i can use a substition rule and a user exit to assign the values. but here comes a problem* i have one clearing document against 3 to 4 vendor invoice documents* so my programming logic has got stucked here? like which vendor invoice line item text the clearing document should pick up?
is there any other enhancements possible or can some one help me with the programming logic to be applied here.
Thank you
Regards,
Vasanth Dlike which vendor invoice line item text the clearing document should pick up?
is there any other enhancements possible or can some one help me with the programming logic to be applied here
Why don't you discuss the issue with your client? As you said, if you pay 5 invoices in a single run, the payment document item text can't carry all of those texts unless you use the long text. What is the reason for the requirement? Perhaps there's another solution.
Maybe you are looking for
-
HT4718 can't find the built-in Facebook on my macbook air
I wanted to try the new share option that comes with this new update (mountain lion) and wanted to share a document but the option to share it on facebook doesn't appear. So i went to settings and look for mail,contacts & calendars but the option to
-
HT5071 How do I set my page size in ibooks? I want to make a pdf that is 7X9"
How do I set my page size in ibooks? I want to make a pdf that is 7X9"
-
Forecast not generated in background
I have question on generating forecast in background, I am getting the message 'Mixed periodicities in a forecast are not allowed In Demand Planning'. I do understand that our planning book has Posting periods and Year along with FYV. But I created
-
I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?
-
I have tried again and again but I cannot get those albums I've sold out of my iPhone. I don`t want to remove them. The main problem is that I usually play randomly and I'm tired of listening to the same music. I would like them not to sync if I don'