OS X Mavericks 10.9.3 Does Not Run Smoothly

Hi,
I just upgraded my iMac and MBP from the Mac OS X ML 10.8.5 to the latest OS X Mavericks 10.9.3.
The new system does not run smoothly.
No matter it's the iMac or the MBP, the screen freezes for a very short of time whenever I try to switch to a different running program(especially when I try to switch to other programs from the Safari).
So what's causing the problem? What should I do about it?
Thanks.
Ed

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

Firefox does not run smooth while loading websites.

Firefox does not work smoothly when it is loading any webpage. Specially, when I open new tabs and load new websites while it is still loading last website in other tab, the situation becomes worse. Main problems that occur are - page will not scroll, or scrolling hangs for a sec or so, works a little bit and it happens repeatedly, new tabs will open but not smoothly, website loading also gets affected in similar way. The dot that revolves on tabs while loading any webpage gets really annoying. It revolves intermittently. Imagine a car engine not starting, it starts, stops, starts, stops. That's what happens with Firefox. But once all webpages are completely loaded and scrolled 2 or 3 times from top to bottom of the page, then it is all good. All the problems occur when page is still loading in fore- or background in any or all of the tabs. I tried to run Firefox with all add-on and plugins disabled, tried to refresh Firefox from troubleshoot information. But nothing helps. I even uninstalled and reinstalled Firefox. I guess my laptop is not having memory issues. I am using Windows 7 x64 based system. RAM is 4 GB. All other software work well. Most importantly, Chrome has no such issues in comparison to Firefox. Also, when IDM (internet download manager) takes over some downloads, the Firefox hangs for few seconds. Please help.
Thank you.

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window

HD video does not run smoothly in Premiere Elements 7

I have been using Premiere Elements 7 to edit short videos for a couple years now with my standard definition camcorder. I recently bought an HD camcorder. It is impossible to edit these videos in the timeline as they don't run smoothly at all. The raw videos themselves play perfectly but not in Premiere. How can I fix this? Is there a way to lower the quality of the videos temporarily in the timeline just so I can edit them with the finished product being in HD?Will upgrading to Elements 10 fix the problem?

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
How are your hard drives configured?
My 3 hard drives are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

PE 9 does not run smoothly in Clip Timeline

I'm running PE9, I import a HD video clip with a plug-in... the software runs perfectly. If i add text, it starts to jump. I'm running a PC with an i7 Processor and 10 gig of RAM, Windows 7. Is there something I'm doing incorrect?

GavinLuke29
I just saw your thread. Glad that rendering the Timeline content resolved your issue.
You mention "...time to move to PE11..."
If you do, among other things that you will find is that there is a marked change in the 11 interface as compared to earlier versions. So I would suggest that you go the free 30 day tryout of Premiere Elements 11 from Adobe before purchase.
One of the major perks of Premiere Elements 11 is that on Windows 7 or 8 64 bit or Mac 64 bit it is a 64 bit application that can take advantage of the 64 bit system resources. That is a big help especially when trying to get larger projects taken to a successfully conclusion. Right now with Premiere Elements 9.0/9.0.1 on Windows 7 64 bit, you are dealing with a 32 bit application running in the 32 bit compatibility mode of a 64 bit system with all the limitations of a 32 bit system.
Looking forward to your progress.
Thanks.
ATR

Videos do not run smoothly but audio does and I get a scripts message

When I try to watch a video from a certain site it is jumpy and does not run smoothly although the audio does. I get a message about scripts but so not know what to do.

{Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
http://kb.mozillazine.org/Problems_printing_web_pages

After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Since installing mavericks, my computer calendar does not sync with my iPhone and iPad calendars. My iPhone and iPad are synced however. What can I do to make all of my mac devices sync

Since installing mavericks, my computer calendar does not sync with my iPhone and iPad calendars. My iPhone and iPad are synced however. What can I do to make all of my mac devices sync

You don't sync the MM calendar anymore, you subscribe to it in iCal,
iCal>Preferences>Accounts, enter the details here.
MM should be the default calendar on all clients.

I am updating my Imac to Mavericks but email updated does not progress

I am updating my IMac to Mavericks but email update does not progress.

You can't go back. There is an iPhone YouTube in the App Store. You can also use the mobile site.
http://m.youtube.com/

I made an upgrade to Mavericks and my iPhoto does not open, what should I do to recover iPhoto?

I made an upgrade to Mavericks and my iPhoto does not open, what should I do to recover iPhoto with all my photos?

what happens? What version of iPhoto do you have? For Mavericks you must have iPhoto '11 version 9.5 - if you own any version of iPhoto '11 it is a free update - if you own a previous version then you must purchase iPhoto '11 in the App store
LN

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

ICal does not run one event that has a Applescript attached to it. 24u?

I have a number of reoccurring events in iCal that run a Applescript. Tow of them refuses to run. I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
so I thought I have a look in the log and found this 24u information.
can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem. Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
Thanks.
Log today:
19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

Hi,
It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
Alternatively you could look to see if the Applescript really needs to use it.
Best wishes
John M
Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

OS X Mavericks 10.9.3 Does Not Run Smoothly

Similar Messages

Maybe you are looking for