OS X Mountain Install File

after downloading os x mountain lion from AppStore, I can't find the image file on my iMac to install it. I have also mistakenly deleted the OS X Mountain from my purchased list in the AppStore application.
1. Where can I find the downloaded image file to start the installation?
2. To to get back my full purchase list in the AppStore application on my iMac?

Thanks for your last input.
Following it, I downloaded Mountain Lion again.
I continued with Install until asked for password where I cancelled it. There was no other opprtunity to cancel the operation.
Tried to delete the file from Launchpad as suggested.
Still did not delete but the message states "The operation can't be completed because some items had to be skipped. For each item choose File > Get Info, make sure "Locked" is deselcted, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
I hope there is another option.
Thanks.

Similar Messages

Installing Mountain Lion using install file

Hello,
I am a newbie to MAC. I have a Mountain Lion install file, is it possible to use this file to upgrade other MAC machine running Snow Leopard 10.6.8 which is using a different apple ID?
Regards,
yelkrebb

You are allowed only using the same Apple ID.

Pkg cannot install files in the Mountain Lion OS after Mavericks installation

I installed Mavericks on second partition while Mountain Lion was installed in first partition.
After 2 OS are ready and can be booted, I found any pkg cannot install files in the 10.8 OS, can I can solve it?
Thanks.

Sorry, I can't tell from your description what is going on. Are you allowed to choose the destination, or does it just install? Perhaps the package is poorly configured and has hard-coded install paths.
Do all installers have the same problem?
Unfortunately, I do not have a drive partitioned like that to test.

Error installing Adobe Muse. Install file is damaged.

How do I get to a new, non-damaged version of the trial download install file for Muse? (I am installing on an iMac desktop and successfully downloaded and installed a trial version of Dreamweaver CS6 yesterday.)

Hi,
I am trying to install MUSE on a MAC (Mountain Lion), I have the latest Air, but still receive the installer has been misconfigured message.
I dowloaded MUSE months ago, but never started my trial.
Today (and from today onwards) I need to get involved with Muse and use it for a couple of websites that I need to design.
I activated my 30 day trial today, but I got a splash screen saying there is a new version available.
When I pressed install, I got this error again. Then I tried to download the installation files from Adobe website, by logging in with my ID, same error popped up. My current Muse's version info is below.
What would you suggest?

How do I save an install file for Photoshop CS6

I need to get an install file for Photoshop CS6 (not CR) that I can use on a Windows PC that, due to security reasons, does
not have access to the internet. In the past I have been able to save the install file for Photoshop and/or Lightroom on my internet connected PC and then move it to the the target PC on a thumb drive or CD. But now with the CC and the new "Adobe Installer" I can't seem to see how to capture the install file.
Please let me know how to do this.
dan

Refer to this:
Direct Download Links for Adobe Software
Mylenium

I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha

[SOLVED] ABS - nasm - install file (nasm.install) does not exist

I was attempting to build the nasm package and I encountered the following error:
==> ERROR: install file (nasm.install) does not exist.
When reviewing the PKGBUILD file there was a line in the header:
install=nasm.install
ArchWiki (PKGBUILD) explains the install directive
The name of the .install script to be included in the package. pacman has the ability to store and execute a package-specific script when it installs, removes or upgrades a package. The script contains the following functions which run at different times
I removed the install= line and everything appeared to work. My question is... does anyone know if the install script it was expecting to find did anything special that is going to cause me grief going forward?
Thx
Last edited by dwardca (2013-07-06 04:43:41)

I figured out what I did wrong. I copied only the PKGBUILD file out of /var/abs/extra/nasm folder .. the nasm.install was still in the folder.
Explains why I couldn't find the answer on Google.
Last edited by dwardca (2013-07-06 04:44:13)

How Do I Execute An exe or an msi Install file From a Button in Flash Movie

Issue:
I have a flash movie that runs as a standalone player on a
Demo CD... I also have an install msi file(same as an exe) that
when the user is done viewing the flash movie they can click on a
menu button in the flash movie that executes the msi or exe located
on the root of the CD which starts the install process.
Question: What is the action script (FOR FLASH 8) that i
apply to the button that will initiate or call the MSI or exe
install file.
Anyhelp would be great... even a link to an example... or
anything... thanks
Thanks in advance...

fscommand("exec","myexe.exe");
Should run the program myexe.exe inside a directory called
fscommand
which must be a subdirectory of whereever your projector is
located.
In windows:I know you can run .bat files with fscommand. But
I'm not sure about msi files.
You can often get around the limitations by having a .bat
file that will a) show a cmd window briefly and b) do the thing
that you couldn't do from flash.
If running the msi doesn't work from flash directly you may
want to try using a bat file...
There's some information here.
http://livedocs.adobe.com/flash/9.0/main/00001177.html#wp143348

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

I ran a disk verify & disk repair on my macbook.. both said my system was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error. Help

m was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error when ever trying to install a driver or update. Help

Hi,
Here's an article for that:
http://support.apple.com/kb/ts1901

Error in .install file

I've found that lot of packages have this error.
In the .install file the follow line:
update-mime-database usr/share/mime > /dev/null 2>&1
should be:
update-mime-database /usr/share/mime > /dev/null 2>&1
because if you are not in the / root when you use pacman the mime type aren't updated correctly

bash wrote:
gspe wrote:
So, just for curiosity why in the same .install file there is one call with / and one call without /
gtk-update-icon-cache -f -q /usr/share/icons/hicolor
update-desktop-database -q
update-mime-database usr/share/mime > /dev/null 2>&1
That's a bug. The first '/' should be removed. We are slowly fixing them.
Thanks for your reply.
Now everything it's more clear

Where do I download an install file for Dreamweaver CS6

Hi Folks,
I will be replacing my current computer very soon and switching to a Mac, I'm very nervous because I can't find a install.file and don't understand how to copy my already installed copy of cs6. I have the serial number. My computer knowledge is limited about burning the program onto a ISO disk or zipping everything to a USB drive.
Now when this program was bought It was for windows 7, Will the key even work being I'm a new mac user? I've thought about Parallels seeing as PS6 needs rescuing too but then I would just stick with windows.
I know everybody is using CC now and the $249 yearly seems okay but I already have the program.
I just wanted to buy my new computer use the install.exe file and use my product key.
any help on where to find the file please let me know.
thank you

Now when this program was bought It was for windows 7, Will the key even work being I'm a new mac user?
No. Serial numbers are Windows only or Mac only.
You will need to apply to Adobe for a platform swap and get a CS6 Mac serial number issued.
Order product | Platform, language swap
On your Mac you can download CS6 for Mac from Order product | Platform, language swap
Once you receive your Mac serial number, enter it to license the software on your Mac.
Or avoid the swapping process and run the Windows version in Parallels on your Mac.
Or join the Cloud. No swapping there either since there are no serial numbers.

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q

HT201210 I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files. I also uninstalled iTunes. Now whenever I try to install iTunes, I ge a message that saya, "An Apple Application support is

I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files. I also uninstalled iTunes. Now whenever I try to install iTunes, I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
Tried it 2 times and no luck. Any advice for me?
Maureen

I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Adobe Acrobat 9: can I download the install files again?

I purchased Adobe Acrobat 9 some time ago but I have misplaced the disk. I have uninstalled it from the computer it was originally installed on and need to install it onto another machine. Is there any way I can download the install files again?

I have the original product key to install it and
I will follow the instructions there CAREFULLY.
There is NO link.
I KNOW I MUST login with my Adobe ID and password.
BUT THERE IS NO LINK.
ADOBE ACROBAT 9 (not 9pro!!!)

OS X Mountain Install File

Similar Messages

Maybe you are looking for