OS X not keeping correct file dates

I have an issue with OS x and the date modified/date created - someone sends me a dvd with a file on it - I drag that file into a folder on my local HD and once it's done copying the file shows the "date modified" as the date that the file was created or burned onto the dvd. This is really annoying.... is there a setting to change how this is handled?

Similar Messages

Apple Configurator: "Policy does not have correct profile data."

I keep getting the message "Policy does not have correct profile data." when I'm trying to prepare new devices in Apple Configurator 1.2. Existing devices work fine, and I was able to prepare a few new devices before getting this error. Any advice besides "wipe and restart" AGAIN?

defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
should eliminate the problem, though it will partially reset the default settings in the Prepare pane. Did you delete a configuration profile that had been checked in the Prepare settings?

Some photos are not sorted correctly by date

I just imported some photos from my friends camera who were on the same trip. However, I noticed that a couple (not all) of his photos are not sorted correctly by date in the Event. A photo from day 3 somehow comes before the photos from day 2. I checked the extended information and the dates on the photo are correct. Has anyone had this problem and know of a solution? Thanks.

It might be of some help to delete the photo cache. Please see this link - http://support.apple.com/kb/TS1314

Finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.

This problem occurs after I move a file or files to trash. If I remove one file, then the sequence is one file off, if I move two files to trash then the sequence istwo file off. For example, if I delete file 1 and highlight (click on) file 3, then the cover flow panel shows file 2, when it should show file 3.

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

BPM was Picking two files but it was not processing 2nd file data in target

Hi all,
I have designed scenario for picking two files and i want to merge this files into single structure and send it target.when i am try to testing my bpm was picking two files but it is processing only file it went target system.i have steructe for source like
source1     target
root        header
a           item 0 to unbounded
b            a
c            b
             c
source2     item1 duplicated structure
a            a
b            b
c            c
i am getting two source files with the same structure but i have to map it one target structure and i want to map both source fileds to one target structre under item node so i was duplicated item node and mapped a b c fields from both(2 source structures).while testing BPM is picking two file bu in the target i am getting only first file data under item node,whatever i mapped with duplicate structure with second file i am not getting into target file(target is standard proxy structure so cant' create new one item node in that occurance is 0 to unbounded thats y i duplicated node while testing interface mapping its working fine).can anyone suggest solution for this problem.
Thanks,
Seshagiri.

Hi,
In BPM follow the below steps and hopefully your problem will be solved.
1.     Configure one sender CC to get the files from your application server, once the files hit the BPM now you need to
                     configure your BPM accordingly.
2.     Use the Receiver step in BPM to receive the messages. Use the correlation step to get the correct files.
3.     Use container and append the files, so both the files will be append, this means the message content will
                     have 1header, body, footer, 2header, body, footer.
4.     If you want to split the message to different receiver then use the fork step else leave it.
5.     Use the transformation step, the transformation step will call the message mapping. Provide the correct message
                     mapping.
6.     Now use the sender step to send the message to the receiver-target system. In this step use the split value for each
                      concept if you want to generate two different files.
7.     Configure 1 receiver CC to generate both the files.
Hope this helps.
Cheers,
Jay

F110 DME File selected is not the correct file

Hi Gurus,
Could you advise on this issue please?
We have executed a payment run F110 for vendors on SAP. The payments documents are created successfully. When we view the payment list via F110 -> EDIT -> Payment List -> generate via RFZALIZ0 program the payments are all correct.
But there is a problem with the DME file. Under F110 -> Environment -> Payment Medium -> DME Administration the total displayed for teh DME file is all fine. However, when we view the DME file created by the run using the Display (gllasses) icon on this screen the data is not correct. The system is selecting data from the last payment run executed in this company code. When we do a download of the file, it is the previous run's data that is contained in the file and not the current run.
The DME variants all seem to be maintained correctly. We have executed payment runs for other company codes and these are all picking up correctly. The DME files are all being stored in the same DME filepath /usr/sap/PMG/dme/ plus company code ID.
When we use FDTA to select out the DME file, again we get the same view as we see in F110 -> Environment -> Payment Mdeium. The totals on the F110 run look good. But the data in the DME file is incorrect.
Can you advise why is the system picking up the wrong DME file for the paymnet run in this company code. All other company codes are fine. We have tested the problem Company Code in our Quality system (where the DME filepath is also /usr/sap/PMG/dme/ plus company code identifier and it works OK there.
How do we get the system to link to the correct DME file data?
Thanks for your quick response.
Michael Ryan

Hi Akhilesh,
We don't use the IDOCs here but just a DME file. The issue here was the DME filesystem is only mounted on one of the application servers. The end user was logged onto the wrong application server and so the paymnet run could not find the file. It was theerfore picking up the last file that it could see from the server that the user was logged onto.
When the user logged onto the correct serevr, the payment run then pciked up the file.
Thanks & regards
Michael

Websites not loading correctly, clock date wrong

Yesterday I noticed the clock on my computer was 3 hours behind and the date 4 years ahead. Since then any attachments in Gmail come up with a warning as it not being trusted. Also gmail's buttons
( delete, spam, move etc) do not load the words. Then facebook does not load correctly it almost looks like html code. I have checked all settings your site has recommended. I do not have any add-ons or adblock, have cleared all cache, cookies history etc. I have all required and suggested items checked but nothing is working. Any other ideas, appreciated

Try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

When using Mac mail, pictures received do not keep their original dates. Why?

Using the native mail application (version 6.6) inside of OS X (version 10.8.5), the dates from the photographs (sent by others) are being removed. To summarize of the picture was taken in November 2010 and sent via email, then saved from the mail application, the date appears to be January 2015.

There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
If iPhoto is not showing you the correct date, make sure the sender is including the Exif metadata when they send the photo.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

Upload document does not have correct file name

I have a procedure that uploads the file in the table with BLOB. We have a DAD entry on our application server as
<Location /pls/excess_admin_qa>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseConnectString 10.125.1.129:1521:sidq02 SIDFormat
PlsqlAuthenticationMode Basic
PlsqlDefaultPage eeq_main
PlsqlDocumentTablename eeq_documents
PlsqlDocumentProcedure eeq_attach_download
# PlsqlAlwaysDescribeProcedure Off
</Location>
and I have another table in my application to connect the table to other ID's.
It used ot work before, but noe it does not work. The file name should have prefix unique id like "F909307841/Blue hills.jpg", instead I get only C:/temp?Bluehills.jpg.
The table structure is
EEQ_DOCUMENTS
NAME VARCHAR2(128 BYTE),
MIME_TYPE VARCHAR2(128 BYTE),
DOC_SIZE NUMBER,
DAD_CHARSET VARCHAR2(128 BYTE),
LAST_UPDATED DATE,
CONTENT_TYPE VARCHAR2(128 BYTE),
CONTENT LONG RAW,
BLOB_CONTENT BLOB
What could have cause this?

yshah wrote:
It used ot work before, but noe it does not work. The file name should have prefix unique id like "F909307841/Blue hills.jpg", instead I get only C:/temp?Bluehills.jpg.
What could have cause this?What browser is being used?
For security/privacy reasons recent versions of browsers by default do not send local file path information from File Browse items to the server, nor expose the file path in the control's JavaScript methods. IE6 & IE7 still yield the path in Windows format. IE8+ adopted an irritating approach of replacing the path with a wholly imaginary "C:\fakepath\"—and this monstrosity has sadly had to be enshrined in the HTML5 spec so we're now saddled with this everywhere...
Changing IE's security config setting "Include local directory path when uploading files" enables the path to be exposed, which appears to be the most likely explanation for this.
For more information see:
http://lists.whatwg.org/htdig.cgi/whatwg-whatwg.org/2009-March/018980.html
http://blogs.msdn.com/ie/archive/2009/03/20/rtm-platform-changes.aspx
http://developers.whatwg.org/number-state.html#file-upload-state

Stock transfer are not showing correct expire date for Shelf life subcontracting

Hi Gurus,
We have shelf life active for PPDS. We had added 5 characteristic to have min and Max shelf life in APO so that data will be considered during pegging.
Self life works perfectly fine for production plant where based on manufacture date min shelf life is considered.
LOBM_APO_SL_MIN
LOBM_APO_SL_MAX
LOBM_APO_SL_UTC
LOBM_VERAB
LOBM_HSDAT
Question is for sub contracting process stock or inventory date is giving back dated where when we run planning run stock is getting expired.
Can any one help in getting stock correct expire date instead of 1982---- some thing like this.
Thanks in advance
Thanks & Regards,
Rajesh Kumar

When you plan subcontracting in SNP following is generated.
Object                             Source                                   Destination
Sub Con PR (Header)       Sub contractor                       Plant
PR/STR (Child)                Plant                                     Subcontractor
PR (Child)                       Child Mat Vendor                    Plant (or direct to Sub Contractor)
Usually first and third items will get converted to Purchase orders and will vanish as and when Goods Receipts are posted against them.
The second order may not get converted in SAP. Tis will remain in the system. But in the next planning run, these will be deleted if the quantities have been already fulfilled.
Regards
Nitin Thatte

FTP connections through Finder not reporting correct file size

Hi,
I have a NAS that running as an FTP server. When I connect to it through Finder it reports the incorrect file size of 2.7GB (the real file size is 61GB)
Its an DMG image file so it obviously fails when I try to image a new IMAC.
FTP through windows reports the correct file size so rules out any problem on the NAS.
Any ideas anybody?
Many thanks.

Hi,
I have a NAS that running as an FTP server. When I connect to it through Finder it reports the incorrect file size of 2.7GB (the real file size is 61GB)
Its an DMG image file so it obviously fails when I try to image a new IMAC.
FTP through windows reports the correct file size so rules out any problem on the NAS.
Any ideas anybody?
Many thanks.

.bat file result not giving correctly in data services

Hi ,
I am using .bat file to count the number of files in the folder. I want to capture the value of the number of files.
I have written small .bat file as shown below
@echo off
setlocal enableextensions
CD %1
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
I have used this batch file in the script as shown below.
$COUNT =exec('D:\\test.bat', 'D:\\docs',8);
print($COUNT);
In the above $COUNT is varchar(255).
actually i have only 11 file sin the docs folder . But it is giving the 442 files.
If I run the same batch file in the windows cmd command I am getting the correct result.
Please let me know what will be issues?
I am unable figure out the issues for weird result when I am using DS.
Please help me in this issue.
Thanks & Regards,
Ramana.

Hi,
While executing the batch file it is taking the Data services installation directory path as shown below.
14504 6420 PRINTFN 3/30/2015 9:40:10 AM 0: C:\Program Files (x86)\SAP BusinessObjects\Data Services\bin File count = 442
I have changed the the batch file with two parameters. one for changing directory and another one for changing the folder.
Now my batch file looks like this.
@echo off
setlocal enableextensions
%1:
CD %2
echo %CD%
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
Then my script is like this .
$COUNT =exec('D:\\test.bat', ' D D:\\docs',8);
print($COUNT);
Now it is giving the expected result as shown below.
14700 13912 PRINTFN 3/30/2015 9:52:18 AM 0: D:\Docs File count = 11
Thanks & Regards,
Ramana.

File Save dialog box not showing correct file name while saving file

hi
Currently, after the Submit button is hit, the File Save dialog box is displayed. If the user saves the file and then opens it then the output appears correct however if the user chooses to open the file without saving on the local machine then the correct viewer is not used to display the file. The name of the file is defaulted as qotSCopPrint.jsp and the default file viewer for jsp files is chosen to view the file. The format of the file is obviously not text (it is either pdf or rtf) so the output shows binary characters.

data : v_repid like sy-repid.
parameters : p_file like rlgrap-filename.
initialization.
v_repid = sy-repid.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = v_repid
            dynpro_number = syst-dynnr
            field_name    = 'P_FILE'
       IMPORTING
            file_name     = p_file.
Message was edited by:
        Chandrasekhar Jagarlamudi

OS X not keeping correct file dates

Similar Messages

Maybe you are looking for