OS X Server 10.6.4 - newly created user cannot login to server

As title.
Just turn on the mac mini server (mid-2010) and do some initial setup. It can access the internet. However, all users that I have created cannot log into the server! Only the one (admin account) that created during the 1st time server setup can login to the server. Anyone know why and what I have not setup properly?
New user during login take a while and no error message popup. The login window just acts like it can login but within a second, the login window "shaking" and prompt for me to login again. Watch below youtube video for more detail.
http://www.youtube.com/watch?v=K7wV3rVJK9c
Here are some information hope can help...
1. My mac mini server connect behind a router.
2. No special setting for the DNS / Open directory. Just use the system default.
3. When open "Server Admin", it shown "mac.local" at the upper left hand side.
Message was edited by: rayzine2

rayzine2
After the Server Setup Assistant has finished and by default the Service Access Control Lists (SACLs) denies access to everyone apart from the default admin account. It does this when SSH is enabled. It's one of the options at the bottom of the dialog box you used to create the default administrator account. To turn this off launch Server Admin, select the Server name in the sidebar > Access.
You should be configuring client workstations to allow network users to log in to rather than the server. Read the documentation:
http://support.apple.com/manuals/#serversandenterprisesoftware
Tony

Similar Messages

  • 500 internal server error when trying to create users

    I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.

    Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
    For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

  • Permission to view content of table of SYS schema to newly created user

    Hi,
    I am facing issue giving permission to view contents of table p_users of SYS schema to newly created user.
    Regards,
    Phani Ram

    Hi Phani,
    Could you please check if you have an a authorization to give a permission to other users for particular schema.
    I mean check for privileges, user and roles.
    Warm Regards,
    Earesh kumar

  • Authorization newly created user

    hi experts,
    can any body explain, what infotype/authorization will be required for newly created user of HCM.
    Thanks,
    Waqas
    You should first go through the
    [SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/48/efa441d54eae5fe10000000a1550b0/frameset.htm]
    & then seek help for specific issues. Please do not post vague questions.
    Edited by: Suresh Datti on Aug 13, 2009 5:10 AM

    Hi Waq,
    Infotype access can be given based on client requirement. What ever infotype they will be using for their requirement you can add under role. Role can be created via Tcode PFCG. There are 2 objects named P_ORGIN & P_ORGXX can be used for giving infotype access under firld INFTY.
    Then creaed role can be assigned to user via Tcode SU01.
    If you want to give Tocde access, then authorization object P_Tocde & S_Tcode can be used.
    Regards,
    Purnima

  • Need to automatically add newly created user account in an existing active directory group.

    Hi All ,
    In my  environment we are having window server 2012 active directory environment.We need to have the newly created active directory user account to get added automatically to the existing active directory group after that new user account creation.
    Please tell us the possible ways to achieve this scenario.
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

    Hi,
    Can you please confirm your requirement,
    When you create a new user account in AD, based on the user's property like Department, Job or Location, the user need to be added to your specific AD groups?
    Regards,
    Gopi
    JiJi
    Technologies

  • The newly created row cannot be found with another view

    I'm building a JSP client based on BC.
    I have 2 views based on the single entity.
    I'm creating a new row with one view and want to edit the corresponding row with the other view without intermediate commit.
    However, the last view cannot find the new row.
    For the purpose I get the newly created row's key and trying to find the row at the other view by it's RowKey with the tag <jbo:Row>. Now I have an exception:
    oracle.jbo.JboException: Row was not found using request parameter ...
    Can someone give an advice, please?

    Hi,
    I was a little uncertain. I do not have any view associations in this case.
    I've tried to use " .setAssociationConsistent(true)" - dosen't help.
    I've just changed the standard wizard-generated Browse-Edit UIX/JSP form in such way that I'm using one VO for the browse-table jsp, and some other VO for editing jsp. The editing jsp is by itself divided into a number of tabs.
    Every tab of the editing jsp is based on a specific VO and all of the VOs are based on the single Entity Object to the one table.
    While I am editing the existing records in the table everything goes right, but if I create a new row via the browse page and then try to edit it, I have the exception:
    " Row was not found using request parameter: .... " This thread is continued in another post
    Re: ORA-03113 end of file on communication channel error
    There is a bug with hanlding of viewlink-consistency and DBsequence in Jdev 9.0.2 that leads to this issue as discussed in the other thread.

  • Newly created user accounts can't log in??

    I've got a 5 year old who is starting to use my computer for game playing, typing notes, and simple web stuff.
    I want to set up a user account for him with parental controls so he can't randomly rename, delete, or change things.
    I've followed the directions, set up a user account, given it a password... logged off my admin account ...
    and when I click on his login picture, it brings up the password window, and when I input the password, it just gives a little shake, clears the password line, and lets me try again.
    I've deleted that account and created a new one without parental controls. I've tried having NO password in the password line. I've tried making sure the short names for the accounts I'm creating are exactly 8 characters. I've turned off Norton antivirus. Nothing works - I cannot log in with any newly created account??
    What else can I try?

    Sara
    Well you probably don't need to be told the NetInfo database is in a bit of a mess, but the significant thing is the "No such file or directory" from the last two commands. Basically this is where passwords are stored (encrypted) since the system changed to "Shadow Hash" passwords in 10.3.
    Your account seems to be OK since it predates this change, and when you installed new system versions you chose the "Upgrade" option which left your settings alone. This is why your primary group is 'staff', or 20, whereas for Will it is creating a group 'will', or 502. That bit appears to be working, just not the passwords. Your password still works because it is in the old 'passwd' file (in encrypted form).
    By far the best thing, at this stage, would be to do an Erase and Install, but this depends on you having a complete and up to date backup of all your files. See Mac OS X 10.4: About installation options. Alternatively you might try an Archive & Install, see Mac OS X : About the Archive and Install Feature, probably not choosing the "Preserve Users and Network Settings" option. But note this requires you to backup a lot of your data, and then re-enter settings and so on.
    If you have a backup, the Migration Assistant can help you get your files back in place.
    If it were my machine of course, I would probably carry on a bit longer trying to fix things, but the appearance of "#NoValue#" twice in the NetInfo output suggests some serious inconsistency which would be difficult to fix.
    Let us know how you get on, and Good Luck!

  • Grant execute to newly created user upon user creation

    Hi
    I have a procedure test in schema of user1.
    I have to grant exec on this procedure to the new user upon creation of the new user.
    like upon
    create user USER1 identified by ....
    then USER1 should be able to execute user1.test after that
    in short every user created should have grant to execute this procedure.
    Please suggest.
    Thanks in Advance

    Hello, if you have a procedure in the schema of user1 then the user is user1, i.e., you cannot be creating a new user if user1 if user1 owns the test procedure.
    To grant execute for a user on a procedure, just run:
    GRANT EXECUTE ON user1.TEST TO <new_user>;If you want to allow every user to execute this procedure then run something like:
    BEGIN
      FOR cur_rec IN (SELECT username FROM ALL_USERS WHERE username NOT IN ('SYS','SYSTEM'))
        LOOP
          EXECUTE IMMEDIATE 'GRANT EXECUTE ON user1.test TO ' || cur_rec.username;
        END LOOP;
    END;
    /And that will grant execute on the procedure for all users.

  • Non-admin user cannot access Essbase server level variables

    Version 11.1.1.3
    Essbase Substitution variables are created at server level. Users are getting error in FR report that uses the Subsitution Variable -- Essbase Error(1051085): You do not have sufficient access to get this substitution variable. Also, users cannot access Substitution variable in SmartView. However, users can access variables created at database level. Users are provisioned as "Server Access" to Essbase and filter access to ASO application "MGTRPTG", where MGTRPTG is an ASO essbase application for reporting. We tried the same provisioning in two other environments and it seems to be working fine.
    User is type "Essbase and Planning" provisioned with essbase "server access", application mgtrptg "filter", Reporting and Analysis "analyst", "dynamic viewer" and "Explorer". In addition, it is given a filter "REP_DME_GALB" which restricts 2 dimensions (Division and Geography).
    Steps taken to resolve:
    1. Existing users were deprovisioned and reprovisioned with no effect.
    2. Created brand new identically provisioned users in Prod and QA. QA user can access the server level var and Prod user cannot
    3. Created a brand new server level variable in Prod and this cannot be accessed.
    4. All services have already been restarted several times.
    5. SR has been opened.
    Temporary workaround:
    By creating a duplicate of the same set of variables at the database level, the reports work. This can only be a temporary workaround as the client cannot be expected to maintain two sets of substitution variables since there are 3 applications using these server level variables.
    Thank you for any ideas!
    Jennifer

    You have stumbled on a defect which is resolved in the Hyperion Planning 9.3.1 patch 6 and above. If you have your planning preferences set to indent members it will cause forms which have page selections to show as invalid in SmartView.
    You can either patch Planning or turn off the preference. The patches are available from http://metalink3.oracle.com and require account which has been associated with your client ID.
    P.S. Usually it's not a good practice to use the admin id.
    Regards,
    -John
    Edited by: Jbooth on Nov 3, 2008 2:12 PM

  • Making the first user to login the server?

    Okay I know the subject is hard to understand, but is it possible with a chat applet class to be able to make the first person to login automatically the server? Just so that we don't have to worry about hosting a server, instead the server will just be the first one to login to the chat page.

    5. what happens to the chat when the first user
    leaves?
    Good question. I thought that I would make it
    immediately chose another user to be the new server.
    Is that possible?I did something more-or-less exactly what you're after, some years ago (don't ask for the source, I haven't got it any more) it wasn't an applet, though, and not intended for use outside a private LAN so might not be suitable. I used UDP multicasting to keep track of which client was "the server", and additionally, there was a token passed around the network that meant each client took turns being the server for a while - load-balancing, if you like, my intention was to keep our systems support guys guessing where the traffic was coming from :-)
    what you're proposing is possible, but if you're planning on 1) making it an applet and 2) doing this over the internet, you'll hit problems
    UDP multicasting over the public internet is somewhat more complex, since there's nothing to stop other people using your multicast channel

  • Newly created users are not able to log in through WEBGUI in SRM system

    Hi All,
    I have created new roles in the SRM system with  the BP tanscation codes Like( BBPSC01
    BBPSC02
    BBPSC03
    BBPSC04)
    after that I have created new users and I have assigned these roles to users. Users are able to login throgh SAP GUI but Users are not able to log in WEB GUI..  Once they providing user id and password in web gui. they are facing issue.
    For web login do we need to maintain any special settings in SRM system?
    Please suggest me.
    Thanks in advance.
    Regards,
    Siva

    Hi,
    Here is the error when user is giving user id and pwd.
    Note
    The following error text was processed in the system DN0 : Error message occurred.
    The error occurred on the application server dm2serv_DN0_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPMSYST
    Regards,
    Siva

  • Newly created user packages with no admin rights

    Hi all,
    Have already opened a ticket with Novell on this one as i've never seen it before...
    Have upgraded a site to ZFD7 SP1 IR2 using the iso's from the Novell site, so it's a full upgrade install, everything went perfectly on the server, consoleone snapins upgraded fine and all
    however, if I try and create a user package with consoleone from the server, it hangs and never completes and I end up with packages with no rights for any users, so i'm unable to edit, delete or do anything with them
    also tried using a workstation with IR4 snapins which gives the same result, using a spare consoleone with earlier zfd7 snapins I can create packages with no issues
    Anyone run into this before and will we be able to get rid of these objects from the tree?
    And are the IR4 snapins not compatable with IR2?

    gleach1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Can't log in with newly created user on new install of Arch [solved]

    Hi all,
    Yesterday I installed Arch anew (because I had a hardware failure that took out my hard drive), but now I'm encountering an issue with logging in.
    After following the installation guide, and creating a new user, I find that I'm unable to log in as said user.
    It complains about wrong password, but it's the exact same password that I entered mere moments before that, when creating the new user.
    I can "log in" as said user by first logging in as root (which does work) and doing "su - <username>" (though then it doesn't ask for a password).
    Can someone point me in the right direction to fix this problem?
    Last edited by madjo (2013-07-03 20:19:43)

    I think cfr meant to say you shouldn't "fix" bash path - as some users did. Unfortunately there's a bit confusion wrt which paths should be used - see this ML thread.
    Some say we should keep /bin/foo for compatibility, others say that we should boldly move to /usr/bin/foo.

  • SQL fails on newly created user

    I just downloaded Oracle XE, installed and managed to go through all the steps in the Getting Started manual, i.e. creating a simple application and tried simple SELECT statements on EMPLOYEES and JOBS tables using the user account, "HR". I have tried to create two new user accounts with same settings as "HR". But when I log in as any of these two new users and just try on the SQL window with the same SELECT statements, I would get an ORA-00942 - form or view not exist. What else should I have to do? Do I have to grant certain access rights to the new accounts? I checked also the video tutorial and couldn't see any thing.

    When you create a table, it is by default created in user's schema, which is same as username. In fact, if you create table table_name as user hr, you create table hr.table_name. That's not an issue if you try to access this table as the creator. But it is a problem if you want to access this table using different user accounts.
    If you log in as e.g. usera, you can use query like this:
    SELECT * FROM hr.table_name

  • Unable to view obiee 11.1.1.5  dashboards for newly created user

    Hi ,
    Im working in obiee 11.1.1.5.0.I created a new user and tried to view a dashboard which I have created in the weblogic user.But it dispalyed the following error.
    Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
    Odbc driver returned an error (SQLExecDirectW).
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27005] Unresolved column: "PEO_DIM"."ENTERPRISE_DESCRIPTION".Please have your System Administrator look at the log for more details on this error. (HY000)
    In my understanding,when a new user is created,even if it is not assigned to any role it will have rights to see all the dashboards.Then what will be the reason for this error?Can anyone provide me a solution?
    Eagerly waiting for a reply
    Fathima farsatha

    This is due to access restrictions in RPD, even though user able to see all dbs user suppose to have access privileges for subject areas.

Maybe you are looking for

  • Mail is crashing every time i open it

    I have a new iMac, which has been working for 2 months trouble free, however every time I open mail from the dock it opens, then freezes. Also none of my messages appear, and in the top bar it says I have zero messages. I'm totally new to Macs so ple

  • Adf input text related

    I have a "input text with list of values" field. Is there a way to to ignore case in this field please? (currently if I enter a value as "test" it says it is not valid even though there is a value "TEST" available.) Is there a property setting? Thank

  • URL for query

    Is is true that when queries are saved in roles, URL for display of the query in the WEB is created? If yes , where I can see this URL. Thanks

  • How to use Digital Signature and PKI in SharePoint Server 2013

    Dear Expert, My company will plan to use Digital Signature and PKI document in SharEPoint Server 2013. Can you guide me what's the concept and how to implement and develop? Please suggestion. BR,

  • ODI error-THIS CLAUSE USES MULTIPLE CONNECTIONS AND THEREFORE CANNOT BE EXE

    Hi John, I have tried loading the smartlist values and the following error is encountered. THIS CLAUSE USES MULTIPLE CONNECTIONS AND THEREFORE CANNOT BE EXECUTED ON THE SOURCE