OS X Server 3.01 Install and File Sharing Problem(s)...

Greetings...Apologies in advance for the lenght of this post...but I wanted to provide as much info as possible to the community to see if someone can see what I may be doing wrong.
My goal: Replace an existing iMac running Mavericks Server v3.01 that I use for Open Directory & file sharing with a new Mac Mini Server (late 2012) running Mavericks Server v3.01. Once new server is working and users defined...I will copy the users data from the iMac to the mac Mini server...then re-purpose the iMac as a simple client (bound to the new Mac Mini server).
Before we get to what I have been trying...I guess I should ask a few basic questions:
Can you have 2 Mavericks servers on the same Local network?
Can you have 2 servers as OD Masters on the same local network?
Are there any "Best Practices" I can follow to set up the new server on a local network that already has a server on it?
Here is what I have tried:
First off...I assign a static IP address to the Mac Mini on the router and disable the WiFi on the mac mini. I am using a direct ethernet cable connection from the mac mini to the router.
Next, I intall Mavericks client and configure that. I download Sever from the App store and install it. After it is installed...I run the "ChangeIp -CheckHostName" command in a terminal window and it reports that the "Names are the same" or something to that effect.
Next up...I turn on Open Directory and set up a OD Master...using essentially all the defaults. I then turn on file sharing and set up a share for the "Users" folder and set that share to use AFP & SMB and to also use it for Home folders.
I then set up a test user as a "Local Network user" and specify that the users home folder is on the "Users" sharepoint.
Once that is done. I logoff the admin account on the server. I then go to my macbook pro and bind it to the server (Users/Login options). I see the server identified as "Mac-Mini.home", select that and it shows a green dot next to the server...which I interpret as it was bound successfully.
I then log in to the newly created network user from newly bound macbook pro. No errors are reported and I seem to be functioning fine. I can use Safari.
As a functional test (lame ... probably) I try to log in from a bound client, save a text text file to the documents folder. Log out as the user on the bound client...Then I log in as that user on the server to see if I can edit/update that same file from thedocuments folder.
However, when I launch the TextEdit app on the bound client, it appears briefly on the Dock...then crashes with a system error. I tried to read the error...but it looks greek to me. I did see something to the effect "operation not permitted...".
I logoff the bound macbook pro. go to the server and log in as that newly created local network user. I get logged in. I am able to launch Text edit when logged in as the user. I can add text...save the test file to the document folder. Everything looks good. I just cannot seem to log in as the user from both the bound client and the server and have it work normally.
So...I am obviously not doing something either in the correct order, or not configuring a service correctly...something I am doing wrong.
Any suggestions are appreciated.

A NAS should work. A proper file server will cache active files in memory. So it's not obvious use of SSD storage will speed your service. In any case figure out how to back it up and most important how you will recover after a disaster requiring full recovery.

Similar Messages

Screen and file sharing problem

I can connect from my MacBook Pro to my iMac when they are both on my home network. I see it in the Finder sidebar, clicking it automatically connects to its shares, and clicking Share screen does what it's supposed to do.
But when I try to connect from the MacBook Pro from the outside world (my company's network) things don't work so well. I have Back to my Mac enabled so the iMac still shows up in the sidebar but when I click on it I eventually get an error message "Connection failed". Clicking on Connect as does nothing. Clicking on Share screen gives a generic error message.
When I connect to the iMac using "Connect to server" (Command+K) it works. I have mapped the AFP and VNC ports of my Airport Extreme base station at home so they point to the iMac.
What can I do to fix this?

I'm sure you've already checked, but have you given user access to the mini via it's sharing prefpane? Not that this will fix it - I currently have five separate macs running leopard, all with file sharing for a specific folder and guest access to those folders and it only works on 3 out of the 5 (the two that aren't working are MacPros - go figure).

SAP Content Server can be installed and supported on a Virtual Machine

Hi,
I would like to know if the SAP Content Server can be installed and supported on a Virtual Machine.
Are there any sap notes to support this.
Regards,
Rajiv

SAP support VMWARE
MAXDB support VMWARE.
you are free to go.
I would ask this question in the SAP on VMWARE group at Virtualization on Windows
close message here when you created the message in the proper forum.

Screen sharing and file sharing not working on LAN

This is not a Mavericks specific problem since it existed before I upgraded to Mavericks. I have a LAN that consists of 3 MBPs and 1 MacPro.
Local screen sharing and file sharing works fine on all of these computers except for one MBP. From this MBP I am able to connect to all of the other computers for screen sharing and file sharing. But I can't connect to this particular MBP for screen sharing or file sharing from any of the other Macs.
This MBP shows up in the left hand side column under "Shared" on all the other computers. But I am unable to make a connection from any computer to the problematic MBP. I get the message, "There was a problem connecting to the server "xxxxxxxx". The server may not exist or is unavailable at this time".
I have tried toggling off and on screen sharing and file sharing with no effect. One probably pertinent strange thing that I notice is that under the Screen Sharing set up the green button next to "Screen Sharing:On" is green. But the message under it states:
"Other users can access your computer's screen
at vnc://johnmacbookproretina/ or by looking for “John MacBook Pro” in the Finder sidebar."
The problem is that my computer name is "John MacBook Pro" and the LocalHostName is "JohnMBPr.local". I believe that at some point in the past the computer name and/or LocalHostName was "johnmacbookproretina".
Similiarly, under File Sharing I am informed:
"Other users can access shared folders on this computer, and administrators all volumes, at “afp://johnmacbookproretina” or “smb://johnmacbookproretina”."
I would appreciate any help I could get to resolve this perplexing issue. Thanks.
John

I've finally been able to solve my own problem.
File sharing and screen sharing on the problematic MBP was being blocked by firewall rules that had been set up several weeks ago when I had installed a trial version of DoorStop X firewall software. I had previously trashed the app when the 30 day trial ended. I did not realize that the software had left a set of firewall rules in the Library/StartupItems folder. Among other things, the rules were set to deny access to the computer on the ports used for file sharing and screen sharing. Once I trashed the DoorStopStartup folder in the StartUpItems folder all the connection problems resolved with a computer restart.

I would like to download my iTunes library onto a mac mini running OS 10.4.11 (and iTunes version 9.0.2), or transfer it from my macbook air, running OS 10.7.5. Tried downloading direct from iTunes and file sharing, but neither is working.

Hello apple support community! I'm trying to download my music purchases from iTunes onto my old Mac Mini. It runs OS 10.4.11 and doesn't have the capacity to upgrade to a newer OS. When I ask iTunes to check for available downloads, it says there are none. I have tried updating the iTunes software (version 9.0.2) but it can't connect to the server, even though I am on a wireless network. I've tried using home sharing and file sharing with my macbook air, but neither are working. Grateful for any suggestions!! The only thing I really use this mini for is music, so really hoping to be able to get my music purchases on there. Thanks.

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

Seeking a document management and file sharing solution for an online client portal

Hi
Late last year our developers created a Member’s Portal for a client’s website (built with WordPress) enabling Members to have a secure area for a discussion forum and crucially, secure
document storage and access, and file-sharing. The WordPress plugin chosen for the Portal was WP-Client.
We have a problem though and I wonder if you or anyone can help?
Basically, the solution was supposed to be like Dropbox or Google Drive but within the Portal but with slight differences. The problem is that the current solution we have isn’t like either
and has various flaws which make it unpopular with most members. It uses free software called kcfinder – see
http://kcfinder.sunhater.com/ as the basis for the file management systems.
So we are seeking to change the file management system. This system must do the following:
It’s got to be intuitive e.g. the action open or download must be ‘typical’ (it is not so in kcfinder you have to right click to download for instance
You must be able open an Office document (especially Word, Excel and Powerpoint) online in situ within the portal. Currently in kcfinder you have to download it.
You must be able to edit it online. Currently you have to download it, open it, edit it, re-upload it and overwrite it.
The client uses Sharepoint (I think that’s part of MS Office 365) and wants to be able to I think drag docs from there straight into the Portal file management system (I think at the moment they have to download a file from Sharepoint to their hard drive
and then upload to kcfinder.
We are currently investigating using a WP plugin for Google Drive
https://wp-glogin.com/drive/ and Google Apps for work to create some sort of file management system that meets the requirements.
However having loaded the plugin, the developer has found that two issues remain that so far defeat us:
Firstly, and this seems to be applicable to using Google Drive outside the portal as well as in it - you can’t edit Word docs online in Google Drive without creating a Google Doc. This means we get duplicate docs which we don’t want – and they’re in
the wrong format. We want Word and no duplication. The members/users don’t have time to delete and change the format back to Word. I guess the same applies to other Office docs.
Second, apparently you can’t create a new folder in Google Drive in the portal.
So my question for this forum is really what can you suggest, either as a fix to the Google Drive solution or is there a totally different plugin or set up we can use? Ideally it should
be Office-based or friendly since most of our users use Microsoft Office.
The other proviso is that it must be affordable. We/client cannot afford the $10 per user per month that some systems charge. The attractiveness of the Google option is not only the wide
use of Google Docs (notwithstanding the fact that you can't open Word in GD instead it creates a duplicate in GD) but the fact that the plugin is cheap.
Thanks in anticipation.

Hi,
Why don't you take a look at Office Web App server which provides browser-based file viewing and editing services for Office files:
https://technet.microsoft.com/en-us/library/jj219435.aspx
It can be integrated with your customized website, and provide the ability to online view/editing Office documents..
Hope it helps.
Aravindhan Battepati

File sharing problems and horror story (nearly)

I use Leopard on a MacBook Pro, a MacBook and a iMac G4 800 MHz (unsupported model).
I have on the iMac and the MacBook Pro many users (the same ont he two machines) and I always use Fast User Switching.
I have had very few problems with Leopard until now; I like it even if there are some glitches or some new features which are not my cup of tea (hierarchical menus missing from the dock, stacks useless when there are many items, FireWall impossibilities (?) to open specific ports, Back to my Mac working on a Lan but not from outside until now, problems with a few apps (Parallels networking erratic), ...
Now about File Sharing.
Let say my main account is user1 (Administrator), and I have another user2 also administrator, plus user3, user4 standard users.
On the iMac I activate File Sharing.
On the MacBookPro, as user1, if I connect to the iMac Server (using afp://IPaddress_of_theiMac/) I do NOT get the dialog
"Enter your user name and password to access file server YYY
Connect to server as Guest or as Registered User"
but I directly get the dialog
"Select the volumes you want to mount on YYY"
From this, if I select user1 it mounts with full read/write permissions which is normal. It appears that I am connected with my Apple account user1&mac.com (same as mentionned in the Account panel of System Preferences).
On the other hand, if I try to connect to the user2 account, I only get limited access although in the File Sharing Preferences, user1/iMac is mentionned with full Read/Write preferences for the Home Folder of user2.
What is very surprising is that if I log on the MacBook Pro as user2, or user 3 or user4, then connect to the iMac, I first get the dialog to enter a user name and a password. This gives me access with the correct full permissions on user1/iMac or user2/iMac using the corresponding user name/password pair; this is the usual behaviour which is missing when trying to connect from user1/MacBook Pro.
Now for the Horror Story!
Trying to understand what was going on with the permissions of the user2/iMac account, I logged in to the iMac as user1, went to the Users folder and from there had a look on the informations about user2 home folder. In the lower part of the pannel, Sharing & Permissions says "You have no access" (which is normal) and this is followed by a table where users and permissions are listed. It seems user1 has Read and Write access in contradiction with the preceding phrase...
Anyway, I tried to modify these authorizations for user2 by clicking on the lock of the Information pannel and entering name and password of the administrator. Didn't go farther than that. By mistake, I hit Command-Delete and user2 was GONE from the list AND NOT ONLY from the list in the Information window! Using Fast User Switching and going to user2, nothing left on the Desktop and NO Home anymore.
In the System Preferences/Accounts panel, user2 was still mentionned.
In the Users folder, no user2 folder anymore.
Using once again Fast User Switching, I logged as user2 and got by magic an all new Home. Nothing left in Documents, Library or other user1 folders. Standard settings for icons, dock, etc.
My first move has been to use a very recent backup to restore everything (Thank you Mike Bombich from Copy Cloner!).
Once everything was back to normal, I had a look at the Trash from user1 and guess what, the Home folder of user2 was there, complete.
So now I am left with two questions
why is it I do not have the same dialogs when connecting from all the accounts although as far as I can see, configurations are the same?
why is it possible, from an Information pannel to delete the account of another user?
Thank you all for comments!

For the file sharing problems, answer is found in
http://docs.info.apple.com/article.html?artnum=306723

I want to use iChat video and file sharing with Windows users

Nowadays, iChat is compatible with AOL/AIM, Google Talk, Jabber, Mac.com and MobileMe instant messaging services. I know that Yahoo Messenger support will be available soon in Mac OS X Lion.
I tried using AOL/AIM and Google Talk natively in iChat in order to talk with Windows users which were using Google Talk application or web chatting (Me from: Google Talk - My friends from: Google Talk, and Me from: AOL/AIM - My friends from: Google Talk), but videoconference and file sharing were not available.
I also tried Windows Live Messenger in iChat via Jabber intermediate, but it is not efficient and doesn't work for videoconference and file sharing.
So, which IM service combination I should use to chat with Windows users in order to be able to use videoconference and file sharing using such a great app like iChat?
Thanks you.

Hi,
A lapsed Trial or lapsed Paid for MobileMe account will not work in any fashion, as a Screen Name in iChat/AIM apps or as a Email. (Of course it is no longer an Valid Apple ID either).
Given that Google is a Jabber server iChat will Video (or Audio Only) Chat Jabber to Jabber.
With a Valid AIM name (AIM, MobileMe or @mac.com) then it is supposed to work to AIM on a PC
This tends to vary from person to person as to success.
From AIM version 6.5 AIM introduced a Send as Typing feature called "Real Time"
It does not work to iChat and in fact also has to be turned Off in the Buddy List at the AIM end for Video or Audio chats to work.
The AIM app also has to be allowed through the Windows Firewall as an Exception, preferably with UPnP enabled as well and UPnP enabled in their Router.
Trillian is a paid for App for PCs that provide an alternative.
Recently theri site offered 3 windows versions
The Pro version of verion 3.2 (known to work), a version 4 and a version 5 in beta. The version 3.2 used to have a free Text chat version and only the Pro version was needed to Video.
Until the site was reorganised the 3.2 version was "On Sale" at a reduced price.
It seems version 5 is now out of beta
They are still separating out a Pro version.
It is a multi-service client
There is also a Mac version although I have not tried it.
I am not sure what you mean by "Manage" your MSN Contacts.
How about using a MobileMe expired account screen name for using iChat with Windows-Google Talk users? Should I expect the same incompatibilities?
I have already addressed part of this. The fact the name will not work full stop.
However one way of reading this is that you are thing of linking AIM and Jabber (Google) Buddies in one Buddy List
Directly in iChat this cannot be done - unless you are the one with the Jabber Account and an AIM Transport set up.
You would be subject to the same Text Chat only restrictions.
It is a bit like the fact your phone line can be used for Fax, Telephone and DSL broadband. (in fact mine does TV as well)
You granny would not be able to talk to your Fax machine if that happened to answer the call.
Her Fax machine might be able to communicate with your computer if you had an active Fax app on there, and a dail-up modem active to answer.
10:06 PM Tuesday; May 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

10.8 Server file sharing problem

We have a new Mac mini with 10.8 and OS X Server app. The mini has direct attached storage and will be used mainly for File Sharing. There is a repeatable problem/bug with case sensitive folder names and file sharing. For example a folder named "Editorial" is inacessible via "Connect to Server" from a client on the LAN. The same folder with the same permissions, same everthing, except it is named "editorial" works perfectly. Change the uppercase E to a lowercase e and it works. The drive is formatted with normal HFS+. It is Not HFS+ case-sensitive. I have Xserves running 10.4, 10.5, and 10.6 for file sharing and none have this problem.
Has anyone else experieced this? Is there a fix? Other than making everything lowercase.

Simon Slavin United Kingdom
If you have a problem please start a thread of your own. Don't get us confused between solving two different problems.
Simon,
The subject of this thread is dealing with:
"Server 10.8 file sharing problem"
Specifically for direct attached storage file sharing permissions issue.
Client computers having issues with folder permissions
These are exactly my issues as well. I was hoping to try a solution here or maybe proffer a solution if found elsewhere. I did not realize each problem should be opened as a separate discussion....
Sulking back into the shadow...

Yosemite Server when restarted turns of file sharing.

Yosemite Server when restarted turns off file sharing. Any way to get file sharing to stay on after rebooting without manually turning it on?

All services that are running should return to operation once restarted. Now, that being said, where are your share points located? Are they on an external volume? If so, what connection bus? It is possible that file services is failing to start because the volume(s) that contain(s) the share points is/are not accessible yet.
Beyond that, have you looked in the logs? /var/log/system.log is a good place to start. Are there any entries that point to a reason for the service to fail to start?
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

Firewall and file sharing

I'm only using File Sharing on our file server running OS X Server 10.5.8. File Sharing is restricted to particular users in two computer labs. Is it essential in this setting to activate the firewall? At present I have it enabled. Does that affect the speed with which users can access file sharing?
Hans

I don't know, but I can guess -
1) It might be that Apple regards them as "essential services" - and thus does not block them under any circumstances if screen sharing and file sharing are enabled, or
2) it might be that the Firewall does not immediately register them as blocked, and thus things function anyway.

Leopard 10.5.2 File sharing and Screen sharing problem

I have just installed 10.5.2 (clean) onto a Mac Mini 2-core machine. I was running Tiger and File Sharing worked just fine, allowing me access to my external firewire drive from my new Mac Pro (running Leopard 10.5.2). Since installing Leopard I can see the Mac Mini under 'Shared' on the Left menu of the Mac Pro but I cannot get to connect with the damned thing!
I have tried everything I know to no avail. Can anybody help?

I'm sure you've already checked, but have you given user access to the mini via it's sharing prefpane? Not that this will fix it - I currently have five separate macs running leopard, all with file sharing for a specific folder and guest access to those folders and it only works on 3 out of the 5 (the two that aren't working are MacPros - go figure).

Back to My Mac/VNC/Screen and File Sharing with a PC

Ok back to my mac is great but it doesn't work with a pc. What is the best alternative to screen and file sharing with a PC???
Thanks,

Use VNC.
On the PC.
http://www.realvnc.com/products/free/4.1/index.html
On the PocketPC
http://www.windowsfordevices.com/news/NS5673359231.html
Apple's Remote Desktop allows for VNC control through a password.
iFelix

Back up and file sharing

I have fios internet. I have found that the web site in which I can download backup and file sharing is coming up "service unavailable"is anyoine familiar with this?
Glenn S. Petrone

#1 What what website is this?
#2 Have you tried to do a trace route to it?
Which would be..
Go to Start -> Run. Type in cmd
and press enter.
Type in tracert
type in the domain name of the site and press enter.
For example, that is what one user did.. See thread http://forums.verizon.com/vrzn/board/message?board.id=High_Speed_Internet&thread.id=729
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

No web sign in access for Verizon online backup and file sharing - HELP!

I need to sign-in via web browser to my backup files in my Verizon Online Backup and File Sharing service. The Verizon site redesign redirects the old URL with a sign in to a sales page with no way to reach my stored files.
I contacted Verizon support more than a week ago about this asking for a URL with a sign in option to the cloud, was told that it was a problem affecting many customers (obviously eveyone with the online backup and filesharing service!) created by the redesign and that they would have a page created to allow login within 24 hours. I've heard nothing back and still have no access.
I made very clear that this was a HUGE problem for me, as I'm out of the country and rely on file access, and was on deadline for a critical professional project. The support tech I was on live chat with assured me they were working on it and that he would contact me via email as soon as it was resolved. Lots of apologies, etc. but now, a week later ... still no access and no contact. Astonishingly unprofessional.
When I tried again to find a link and/or contact support on Friday I was given no option to file a support ticket, chat with support or do any other kind of follow up. I've tried every search string option possible, including the name of the service with "sign in" appended (the Verizon nomenclature)--site searches a week ago for the service name returned null results. Web searches produce summaries from the old "My Services" page that include "sign in" but those links now redirect to the sales page that tells me how great it is I'll be able to access my files with a web browser with Online Backup and File Sharing. But no option to access the service.
Has anyone figured out a workaround or have a saved URL that still resolves to a Sign In portal?
I grow more desperate by the day. Thanks for any assistance.

I just wasted a lot of time on this same issue -- it turns out I couldn't find my way into the web application because I normally log into a subaccount, and you have to be logged into the primary. I had tried logging into the primary but apparently hadn't tried all possibilities from there.
So I chatted with Verizon support and got the phone number for Online Backup support, left them a message (because their hold music is so repellent I couldn't stand to remain on the line, maybe that's deliberate) and got called back about four hours later (and a second callback the next day, since I hadn't responded to the the voicemail they left on the first callback).
So here are the instructions (until they change the web site again...)
1. log into the primary account (not a subaccount)
2. click My Verizon
3. click My Services on the left
4. click Broadband Essentials and Extras (right under My Services)
5. click the Manage button next to My Subscriptions
6. click the Verizon Online Backup and Sharing xx MB button
The URL that it lands on is this:
https://vzsharing.verizon.net/application_biz/Secure/Home/Default.aspx

OS X Server 3.01 Install and File Sharing Problem(s)...

Similar Messages

Maybe you are looking for