OS X Server Needed?

Hello,
I was considering XGrid for a small exercise across two, maybe three Macs. Is OS X Server needed to act as a controller? It seems from all of the questions, that a server is involved, but not stated as an actual requirement. I do not have a server...
Thanks

Is OS X Server needed to act as a controller?
No. Click here for more information.
(32537)

Similar Messages

Error when running reports: "File Server needs to be re-initialized"

Hi.
This error "File Server needs to be re-initialized" appears when our users try to run reports on 11.5.10. EBS.
There is also a message box that appears and reads:
"A error occurred while attempting to establish a conection to Application File Server. There may be a network configuration problem, or the TNS listener may not be running."
This is a problem in our test environment. We recently ran autoconfig on the test side.
I have checked Metalink and also wider google search.
Perhaps we have an issue with the tnsnames files? Well, I verified this and the tnsnames in production and test, and they are the same.
Perhaps a listener.ora file issue?
"The issue is caused by the variables APPLFSTT and APPLFSWD is not being set properly in the <8.0.6_ORACLE_HOME> listener.ora file. " (Note 263654.1)
I am trying to verify the meaning of the following (in listener):
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /oracli2/oracle/testora/8.0.6 )
,APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE;PROD_FO,APPLFSWD=/or
acli2/oracle/testappl/admin;/oracli2/oracle/testcomn/temp;/oracli2/oracle/testco
mn/html/oam/nonUix/launchMode/restricted' )
In the APPLFSTT entry, should there be any mention of "PROD" ? Shouldnt this all be changed to TEST?
Also, comparing this to the PROD listener, the order of APPLFSTT is different:
TEST: APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE
PROD:APPLFSTT=
PROD_806_BALANCE;PROD;PROD_BALANCE;PROD_FO,
I have made a copy of our listener in TEst, so I can edit the existing one. Trouble is, not sure if I even should try to edit it!
Any suggestions, much appreciated.
Oracle 9.2.0. AIX 5.2.
Notes covered in Metalink:
274177.1
303971.1
304568.1
263654.1

Yes thanks for that. Metalink has informed me to do the same, basically.
But I am in the middle of a cloning, so I will finish that then run autoconfig once again.
I already ran Autoconfig on both source and target, so will do again once this process is over.
Cheers.
DA

Can no longer send mail after upgrade. Says server needs password. Server says down not support a password. Any thoughts?

After up grade I can not send mail from road runner account. Message says server needs password, server says it won't support a password. Any thoughts?

UPDATE: I was able to set up the account using Eudora, and it worked fine. I guess it means that there's something funny happing with Mail.

I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help

I'm trying to setup my email, it's my work email and they don't provide an outgoing server, need help.

With an attitude like that, you got nicer replies than you should have. I have my work email on my iPhone and my iPad, but there's no way on earth anyone here would have known what my companies server is other than my company system administrator.........

Why xmii server needs to be restarted if parameter of rfc is changed?

hi,
I am developing a RFC function module in SAP R/3 which will be called from XMII.Whenever I add any export parameter in the RFC the XMII server needs to be restarted...
I am unable to understand what is restarting of server and why it needs to be restarted ....Please help...
Also i am interested to learn XMII ....How can I start ?

Hi Sweta,
after you have changed the RFC settings, you have to reset the JCO cache because some values are buffered. You can use the following link:
MII 11.5:
[http://<xmiiserverip>:<port>/Lighthammer/JCOProxy?Mode=Reset]
MII 12:
[http://<xmiiserverip>:<port>/XMII/JCOProxy?Mode=Reset]
Please refer to the following thread for infos for new users:
[regarding xmii...;
Also have a look at the WIKI where you can find lots of information:
[https://wiki.sdn.sap.com/wiki/display/xMII]
Regards
Michael

What does "each JMS server needs to have its own unique store" mean?

Does this mean that each JMS server needs it's own table? I found this info here:
          http://forums.bea.com/bea/message.jspa?messageID=200022411&tstart=0
          I'm attempting to find the root cause of why we're crashing the OS on a highly clustered (14 managed server) implementation whenever a JMS queue (through BEA's JMS JDBC Store) is being hit.
          Thanks!

JDBC stores must be configured to use different database tables (by configuring a different "prefix" for each). Otherwise, they will corrupt each-others data. But I've never heard of this causing an O/S crash. Perhaps you are using native code JDBC drivers that have problems. You might want to try switching drivers, or even simply try switching from JDBC stores to file stores (temporarily) to see if that fixes the problem. You might want to check if you're using a supported JVM, etc. I'm curious about what versions of O/S, driver, JVM, and WebLogic are you using.
          Tom, BEA

Does HTTP server needs to running??

I am following Oracle by example documents to configure Streams. Does Oracle HTTP server needs to be running in order to setup Streams successfully?? Or it is not relate?? thanks...

Oracle streams only needs packages and views in the database.
Streams Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96571.pdf
Joel P�rez

Does Admin server need Oracle Client

I have a setup where the admin server resides on a different server than the managed server. To setup a Data Source/connection pool does the admin server need to have the Oracle client setup for the data source to work which is targeted ONLY to the managed server.
Thanks
John

John Essert wrote:
I have a setup where the admin server resides on a different server than the managed server. To setup a Data Source/connection pool does the admin server need to have the Oracle client setup for the data source to work which is targeted ONLY to the managed server.
Thanks
JohnHi John, no, and we recoomend highly that you use the oracle driver
in the thin mode, which needs no Oracle client installation at all.
Joe

BPC 7M SP04 - app. server need SAN access?

For PRD, we intend to split up our BPC 7M SP04 configuration into 2 servers - DB and App. server
Will the app. server need access to the SAN? ( what data does it store, and is it big )?
Are these assumptions valid?
App. server needs to be 32 bit OS
DB server can be 64 bit OS
For DEV, we will have one server for all components. We assume this needs to be 32 bit OS with /PAE switch confitured?
Thanks in advance .. Sanket

Hi,
Having a SAN access for your Application Server is not mandatory but could be used to store the BPC Data folder (the one containing Webfolder directory which stores Excel template and logic file).
DB in 64 bits and APP in 32 bits is fine. Just check where you want to install SSRS component (on DB or App server).

Server needs to trust *client* code without a certificate

Here's a sticky security question
I want my server to trust that a client has performed the operation it says it has on some data held by the client (the client performs the operation to reduce server load). The server can supply code to perform the operation to the client, via a serialized object or RMI.
However, I don't want every client to have to register with the server (eg if each client had its own certificate this would be necessary)
Presumably something must happen as the client performs the operation to show that the correct (server generated) code was used.
If the object whic h knows how to perform the operation is sent using RMI with a public sign method and the server lends its own private key for the signing, in a private field of this object, can a malicious client discern the private key of the server simply by deserializing the object ? Encryption of the serialized object doesn't seem to help as a normal client needs to decrypt, so the malicious one can too.
What about if a private/public key pair is generated at the server and given to the client for signing? again the malicious client could sign using the key then perform a completely different operation.
What should actually be signed at the client end - the object sent which performs the operation ? the server needs to know that this signature proves that the code it sent was used.
would be interested in any ideas (this is for a university project)
thanks to all
John

Hi John,
First, secure your coms : SSLv2 for example (1), so the further discussions between the "server" and the "client" will be sure (for a moment ;-).
Next, supply the "server code" from the server (only via the secured channel) to the "client" (2).
This code must be in two parts : "crypted data" and a "decryption module".
The "decryption module" must contains a "server's public key certificate" to use to decrypt the "crypted data" (3) that contains the "real code" and a "serial ID generated by the server".
Then the "decryption module" must start the newly decrypted "real code", to do the "server operation" on the "client data".
At the end, the "real code" sends back the "client result" and the "serial ID" encrypted with the "server's public key" (4).
(1) SSL v2 creates a secure channel betwwen a server and a client (typically a browser), but at the intiative of the server and with no active part of the client, except to accept the chosen algorithm (I simplify here but it's schematically the point).
(2) So with this channel (at the initiative of the identified server) the "client" is sure that the "modules" came from the "server".
(3) This encryption has been made with the "server's private key", so only its "public key" can undo it : so the "client" and the "decryption module" are sure that the "real code" has not been alterated.
(4) Same thing, but opposite side : only the "server's private key" can undo an encryption with its "public key" : the "client" is sure that only the "server" will be able to do something with its "result".
With this proposition, the "server" is sure that the "client" has done its "server code" on some data and has given back a "result". But it has no guarantees on the identification of the "client", only that it is the same from the beginning.
By the way, never "lend" a private key to another one, it is lethal to your security, since PKI is only a matter of trust on the public/private keys pair and its link with an identity (that's why Certificate Authorities are made).
Pleased if I have been of some help, Wild.

Work Folders Stopped Working - The sync server needs the user's current user name and password

Our Work Folders deployment has just stopped working.
Once the user has logged in to ADFS they get the following error message "The sync server needs the user's current user name and password (0x80c80300)"
At the same time we see the following error in the file servers SyncShare event log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-SyncShare" Guid="{9E6153AD-A829-4B70-B997-8E463A7A111C}" />
<EventID>1013</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-12-03T14:48:32.922225100Z" />
<EventRecordID>1178</EventRecordID>
<Correlation />
<Execution ProcessID="1988" ThreadID="2800" />
<Channel>Microsoft-Windows-SyncShare/Operational</Channel>
<Computer>fileserver.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="User">eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6ImVoZWxJMUFwWm9HT2VZdXU5NGZZb21tamUzayJ9.eyJhdWQiOiJodHRwczovL1dpbmRvd3MtU2VydmVyLVdvcmstRm9sZGVycy9WMSIsImlzcyI6Imh0dHA6Ly9hZGZzLmVzaGVyLmFjLnVrL2FkZnMvc2VydmljZXMvdHJ1c3QiLCJpYXQiOjE0MTc2MTgxMTIsImV4cCI6MTQxNzYyMTcxMiwidXBuIjoiRExvdWdobGluQGVzaGVyLmFjLnVrIiwidW5pcXVlX25hbWUiOiJEYW5pZWwgTG91Z2hsaW4iLCJmYW1pbHlfbmFtZSI6IkxvdWdobGluIiwiZ2l2ZW5fbmFtZSI6IkRhbmllbCIsImF1dGhfdGltZSI6IjIwMTQtMTItMDNUMTQ6NDg6MjYuNzU1WiIsImF1dGhtZXRob2QiOiJ1cm46b2FzaXM6bmFtZXM6dGM6U0FNTDoyLjA6YWM6Y2xhc3NlczpQYXNzd29yZFByb3RlY3RlZFRyYW5zcG9ydCIsInZlciI6IjEuMCIsImFwcGlkIjoiMTY4RjNFRTQtNjNGQy00NzIzLUE2MUEtNjQ3M0Y2Q0I1MTVDIn0.eCefzniju5qjqxIDdC2KCefkiNBNoGV-B1zg8EsnygUyV0LilPpANpv5uH75JJ9ekv9BN0vz7m6QezHEN4dYc5Z-6UJCzm7Wz6s1yNqVz-Sq5_wf_RrrHkxntcLXT2LHyyLN6ZxJy8uOF4vLw_fLsDzrNHkpaKUoevLAvNLI503IAiKDijKmQ0Qa2hZGsDT57yhKLGtjMXdqwx6FpFpP6vxA9qoUlR1E-tlt0ezTSD8j36djV9VbFpTlfeiH26D0n92T4exQCJkPdVzR42G7KbYyo9Acu0GGf7dnameWMQV9lT-Jtb7hH9xNReuVSVzqgtstsSDJR0mCsKJfLrdKVw</Data>
<Data Name="Error">0X80C80021 - ECS_E_SYNC_ADFS_UNAUTHORIZED</Data>
</EventData>
</Event>
I have attempted re creating the setup using several blog posts including:
http://blogs.technet.com/b/filecab/archive/2014/03/03/deploying-work-folders-with-ad-fs-and-web-application-proxy-wap.aspx. Including deleting all WAP rules, deleting and recreating the Relaying Party Trust and obtaining new certificates for the file
server.
ADFS and WAP are working correctly for our Office 365 federations and on-premise SharePoint, Exchange and other web applications
If I turn ADFS authentication off on the Work Folders server I can successfully connect and setup work folders on a domain joined computer, however as soon as ADFS authentication is enabled I get the above error.

Hi,
As you expressed, it should be an authentication issue.
I assume it will work by selecting Windows Authentication instead of ADFS in step shows in following picture.
The article also mentioned that the certificate is needed in following computers.
The self-signed AD FS certificate will need to be exported and installed on the following machines in the test environment:
Work Folders
Web Application Proxy
Domain joined Windows 8.1 client
Non-domain joined Windows 8.1 client
Thus I would like to confirm if certificate is also imported.
If you have any feedback on our support, please send to [email protected]

SBS Server 2003 and Exchange Server - need to access but only have HDD

Hi,
I have been redirected here from a Microsoft Community Forum. I am reasonably conversant with windows systems but am not a computer professional, just trying to see if I can solve a problem without spending a great deal of cash at this stage as
our office has been completely flooded out and we are still struggling to regroup....Here is the original question.
A couple of years ago our sever died completely, we kept the HDD's, but unfortunately not the CD's with the software on or the software keys. So I have now 2HDD's, the original boot partition and one with data on. both clean and fully working and
connected now to an old desktop. I can see everything fine, but I cannot boot from the original boot drive (I have tried simply disconnecting the desktop's boot drive and the windows logo shows for 1 second an d then chucks me back to the initial (DOS?) load.
The point is that I need to boot into SBS2003 with the exchange server installed in order to access a handful of old emails which have become extremely important, and also to run an old version of Filemaker server which will not run on any newer O.S.
I have tried, incidentally, a converter for the exchange files and I can see the directories but I think that unless I pay $xxx for something, which I cannot afford now, then I will not get the emails and all attachments back.
So my question is this - is there anyway I can use the original boot disk in a new hardware environment to restore both sbs 200 and exchange to working condition? I have paid vast sums for both so I do feel that I should be able to use them still!
Many thanks
Gor

Hello
tip:
get one pc with hyper-v or VMware. with enough memory.
install 2003 OS with sp2
run dcpromo add same domain name wich is old.
install exchange 2003 /with same ORG name / and install exch 2003 sp2
open exch console and Enabling the database to be overwritten on mailbox database
dismount database, rename database, and copy old database to new and mont database
run clean mailbox
create new user without mailbox.
select disconect mailbox and connect to new user.
sorry my english

PDF stored on Application Server - Need to retrieve and display

Hi All,
Let me explain to you what I am doing and how I have not succeeded.
I am quiet a senior ABAP guy henceforth I am posting this and have also looked for previous posts to no avail.
Firstly, I use GUI_UPLOAD and OPEN dataset to store a PDF file on the Application Server. I have retrieved it with CG3Y without any problems. My requirement is that I have a list of these PDF files displayed on a report and a user selects ONE line and clicks VIEW PDF (custom ALV). This should then launch the PDF in acrobat from the Application server.
I have tried WS_EXECUTE but that does not work. I do not even mind if this PDF is displayed in HTML or an image. I just need some help??
ANy help will be greatly rewarded.
Thanks!!

the working of this code is embedded in the comment:
" First I set some define for the program:
define for the program *****************************************
DATA exe_4_doc TYPE string VALUE '"C:\Program Files\OpenOffice.org 2.3\program\swriter.exe"'.
DATA exe_4_xls TYPE string VALUE '"C:\Program Files\OpenOffice.org 2.3\program\scalc.exe"'.
DATA exe_4_ods TYPE string VALUE '"C:\Program Files\OpenOffice.org 2.3\program\scalc.exe"'.
DATA exe_4_ppt TYPE string VALUE '"C:\Program Files\OpenOffice.org 2.3\program\simpress.exe"'.
DATA exe_4_pdf TYPE string VALUE '"C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe"'.
" local data
DATA file_path TYPE string.
" name of the executable
DATA program(128) TYPE c VALUE ''.
" I searched the file path for the extension for some type of file
" assigning the name of the program to use:
" pdf file
IF program IS INITIAL.
    SEARCH file_path FOR '*pdf'.
    IF sy-subrc = 0.
      program = exe_4_pdf.
    ELSE.
      SEARCH file_path FOR '*PDF'.
      IF sy-subrc = 0.
        program = exe_4_pdf. " defined at the top
      ENDIF.
    ENDIF.
ENDIF.
.... " search for other extension
" then I assigned the value to
IF program IS NOT INITIAL.
    " '"' are mandatory to avoid problems
    " with white space in the path
    CONCATENATE '"' file_path '"' INTO file_path.
    CALL FUNCTION 'WS_EXECUTE'
         EXPORTING
              " file_path is the path to the file
              commandline    = file_path
              " program is one of the define above
              program        = program
         EXCEPTIONS
              frontend_e
              rror           = 1
              no_batch       = 2
              prog_not_found = 3
              illegal_option = 4
              OTHERS         = 5.
    IF sy-subrc = 0.
         "error
    ENDIF.
ENDIF.
With this code I can open every file I want with every program.
Hope this can help.
Cheers
Gabriele

Setting up mail services. Name of server needs to be changed?

I setup my xserve with snow leopard. By default it was named server.ourcompanyname.private.
Here is my problem Im trying to host our company web site along with mail services. Need to bring all this in-house.
I have with my web provider 5 dedicated IP address, and router address. I bridged the modem to an airport extreme to hand out all the ip address and DHCP, this was done with apple support.
I need advise on how to go about setting up all the services. Can the name of the server be changed without causing major problems?
Any advise would be appreciated.

One other note. Can I change the .private. to .com and will this help me setup mail and hosting services?

New to server, need VPN for remote desktop and file share...

I've set up server and have the VPN working, I think, I need to have several outside systems join the servers VPN permanently to allow for file sharing and remote desktop. I don't want the "normal" internet browsing to go through the VPN (huge slow down) I have read that a "split DNS" or "split tunnel" is what I need, then to disable "send all traffic over VPN connection" option on each remote system. I was a little confused after reading on how to do this on Leopard server (the only instructions I found) but have absolutely no idea on how to do this on Snow Leopard server (the server I set up is 10.6) any assistance would be great, thanks in advance.

Server Admin, VPN, Settings, Client Information, Network Routing Definition.
Here add a private network record type that matches your LAN/VPN ip.
For example
IP Address: 192.168.0.0
Mask: 255.255.255.0
Type: Private
You can find more informations about this feature in Snow Leopard Server documentation:
http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.6.pdf
search for "Configuring VPN Network Routing Definitions"

OS X Server Needed?

Similar Messages

Maybe you are looking for