OS X Snow Leopard restore disks from different conputer.

I bought a new 13 in. Macbook. The Box got thrown out while I wasn't home, and without anybody checking to see what was still in it. There was the manual, the extension chord and the OS X Snow Leopard and Ilife restore disks. I bought some restore disks that came with a different computer but same model and they do not work. When I try to use the Ilife disk it says "cannot install software on this computer. When I try to install OS X I get a similar message. Is there away to get these disks to work? Do I have to buy retail versions from apple? I was originally going to reinstall Ilife because Iphoto wasn't working so I erased it.

Slipperynixon wrote:
I bought some restore disks that came with a different computer but same model and they do not work.
By "same model" do you mean exactly the same model or just some other MacBook model, probably an older one? They must be for exactly the same model or they will not work, in part because the hardware in the newest Macs is not fully supported by the OS version on the older discs.
You should know that the sale was probably shady -- the licence for the grey system discs that come with a Mac prohibit selling those discs separately -- so you most likely can't trust anything the seller said about them. The exception would be a reseller that bought excess inventory from Apple or its distributors, along with 'fresh' licenses to use them, but any reputable reseller would be upfront about that & which specific Macs they would work with.

Similar Messages

How can I create a disk image of snow leopard installer disk from my Imac which runs it?

how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

How many Installs Can I do from a Snow Leopard Retail Disk?

I have an old Snow Leopard Retail Disk (10.6.3) that I used a few years ago. Our Macs have mostly been upgraded to Lion since then, but we still have a 2007 iMac running Leopard and want to run some legacy third-party software. We need to upgrade that iMac from Leopard to Snow Leopard, then upgrade via system update to 10.6.8 in order to run the legacy software.
I know we used this Snow Leopard retail disk to upgrade one computer to Snow Leopard already, and we might have used the disk to install Snow Leopard on an external hard drive as well but I'm not sure as it was a few years ago and that hard drive may have been archived and placed in storage.
My question is, is there a limited number of installs that we can do with this disk? Do we need to first uninstall Snow Leopard from one computer before we can install it on another?

Unlike Windows, the DVD or CD versions of the Mac OS (Snow Leopard or earlier) have no serial number, or even keep track of how many times you've installed it. It's all on the honor system of following the license you have, which as mende1 noted, is either a single computer license, or five in one household (not shared with friends or relatives).
Lion and Mountain Lion are a bit different. Macs that came with either OS have a machine specific version (for the necessary hardware drivers) and cannot be shared, other than with a 100% identical Mac. The App Store versions are intended for Macs that were released before the respective OS's, and contain only the hardware drivers for the Mac models they are listed to support.

Install Leopard on Tiger MBP using Restore Disk from Leopard MBP

As the title suggests, I just bought a new Leopard MBP which, of course, comes with the restore disks. I tried to install Leopard on my old MBP using those disks and it says "This software can not be installed on this machine."
I thought as long as it's the same machine (MBP) this would work?
I also tried installing using target disk (with FW), still the same message.

There are several different versions of restore disks, noted by the disk Version Number on the disks themselves. Only certain versions will work with certain machines. I have seen versions 1.0 through i believe 1.3 for MBP Leopard restore disks, so it is kind of luck of the draw. A straight Leopard will normally work on anything though. Also there is only licensing for 1 use of that particular copy of Leopard that comes with the purchase of your new MPB. Trying to install Leopard on both machines is illegal, breaks the EULA, and is considered software piracy. When/if you log online, your computer calls home to Apple to let them know what is going. If Apple would so choose, they can press charges resulting in at least a $250,000 fine and prison time. Just and FYI/cautionary piece of advice especially when asking those types of questions in an Apple owned forum.

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all. Simply get the Apple logo and the clock below and then after about 10 mins the laptop switched itself off. The Snow Leopard disk is a brand new family edition. Error message when attempting to install was that "this software cannot be installed on this disk".

Thanks Fred, but I've tried '''ALL''' that already.
I '''THINK''' I might have found the problem - the Profiles folder has been locked by inherited properties from the levels above. I have had to go all the way up to my User folder and reset ALL the properties from there down to be unlocked so that I could remove the prefs.js file so that it could be recreated on the next launch of FF. Exactly why my User folder is locked in such a way as to stop me/FF making changes when I have been able to alter preferences at will in the past, I don't know ...
So far, so good. I have since done a complete shutdown and when I restarted this morning, FF seems to be behaving itself ...
flashfletch

I want to go back to Snow Leopard 10.6 from Lion. Quicken 2007 is not compatible with Lion.

I want to go back to Snow Leopard 10.6 from Lion 10.7.2. Quicken 2007 is not compatible with Lion and I don't like Quicken Essentials 2012.

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Why does my computer keep ejecting the snow leopard install disk

I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date. Any idea what could be causing this or what I can do?

Susan Rule wrote:
I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date. Any idea what could be causing this or what I can do?
Clean the bottom of the disk with a bit of rubbing alcohol and a soft cloth, polish to a shine.
If it's a PowerPC Mac it won't upgrade.
Must be a 10.6.3 Snow Leopard retail disk (white with cat like my avatar)
Try holding the c key down with the disk inserted and then reboot.
If all that fails, the disk is likely bad. It happens.
You can chose to copy it and hope the errors get fixed or exchange it for another with Apple.
Insert your Snow Leopard DVD.
Open /Applications/Utilities/Disk Utility.app.
In the left side of the window, select the “Mac OS X Install DVD”.
Click “New Image” from the Disk Utility toolbar and select where you want to save the temporary image. For “Image Format”, choose “DVD/CD master” and for “Encryption”, choose “none”.
The image extension in the “Save As” box will be .cdr (this is what you want) — click “Save”.
Once the temporary image is created, it will show up on the left side of the Disk Utility window. Select it.
Insert a blank dual-layer DVD
Click “Burn” from the Disk Utility toolbar.

MAC OS X Snow Leopard install disk won't install "with this version"

I am trying to get ready for the Snow Leopard install disk to migrate from Mobile Me to ICloud. However, the disk install I received to start the process won't allow me to install saying I have the incorrect version to do so. I am up to date in all my software installs. What am I doing wrong?
Thanks!

If you have an iMac running 10.7.4 as it says in your profile, why are you installing Snow Leopard? If this is a different computer then it would really, really help to know something about it.

Erased and copied Snow Leopard OS disk to Disk Utility partition

Hi,
I am no way a technical person and think i have ruined my ok working MBP. After alot of research, to save money I decided to do a clean reinstall of Snow Leopard (previously running Mavericks OS) and erase my old data and settings on the MBP, as it was running super slow and I wanted to go back to the old OSX. I have a 2009 MBP previously running Mavericks installed from Dec 2013. When I went into the disk utility screen after deleting everything and resetting information, I couldn't restore the Mavericks OS as I downloaded it from iTunes for free - said to get from a saved folder or something. So I clicked around and accidently copied/duplicated the old Snow Leopard installation disk that was inserted and restored it as the Hard Drive/Disk utility (see pic attached).
Not sure how to save this computer? Is there a way to reset it back to factory settings before I incorrectly clicked the wrong button and ruined it?
Any info would be helpful.
Cheers

Hi AndyBall_uk,
Here are photos of all the images that I think will help. The DVD copy is the one that I pop in computer. I haven't tried the other disk which was also a DVD, this one is called the applications disk.
With the restore screen on the HardDrive image, this is where I accidentally clicked a few buttons and copied the OSX install disk over the previous Mac hard drive.
Thank you for your assistance, it is much appreciated.

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Using snow leopard upgrade disk with bootcamp

I can install snow leopard clean on a fresh drive on my MBP with my upgrade disk.
It is the disk that came as a drop-in dvd with the MBP, along with its original install disks.
If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation?
Or do I use my leopard install disks that came with my computer?
Is the snow leopard bootcamp process any different from the process in leopard?
I had windows Vista on there fine before upgrading my hard drive and going to snow leopard.
Do I need to print out those 25 pages again?
Thanks for any advice.

Luis Ortega wrote:
I can install snow leopard clean on a fresh drive on my MBP with my upgrade disk.
It is the disk that came as a drop-in dvd with the MBP, along with its original install disks.
Are you asking if you can? Yes, I think you can. The worst case is that you would have to install Leo first and then upgrade to Sno.
If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation?
Or do I use my leopard install disks that came with my computer?
You would use the Leopard install DVD.
Is the snow leopard bootcamp process any different from the process in leopard?
I had windows Vista on there fine before upgrading my hard drive and going to snow leopard.
Its the same. Just start up the the Boot Camp Assistant and follow the instructions. No need to print the 25 pages again, IMO.
Do I need to print out those 25 pages again?
Thanks for any advice.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need to purchase another copy of Snow Leopard Server?

I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?

The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

Running 10.5.8 on Intel Core Duo, Snow Leopard disc (purchased from Apple) won't work

I am running 10.5.8 on my iMac and want to upgrade to Lion. Was told to upgrade to Snow Leopard first. Purchased the Snow Leopard install DVD from Apple, but it begins the installation process then says CD is dirty. Hooked up an external DVD drive and tried again, got the same message. I literally unwrapped the disc and put it directly into the drive...it couldn't have gotten so scratched or dirty that it wouldn't work.
Here is my system info:
Model Name:          iMac
Model Identifier:          iMac4,1
Processor Name:          Intel Core Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          1.5 GB
Any ideas on what I can do? I've read that there were tons of problems with this disc/upgrade...
Thanks!

Call the place you bought Snow Leopard from, and ask for them to replace the disk as it or your DVD drive is obviously defective.   As others have noted, you can't upgrade to Lion regardless.
That said, before you install 10.6, be sure you really are prepared for it: https://discussions.apple.com/docs/DOC-2455
And if after getting a replacement 10.6 disk it fails to install, verify your PRAM battery is not over 4 years old, and that your optical drive isn't dirty by bringing it in for service.

Neither software upgrade or Snow Leopard install disk will upgrade

Neither software upgrade or Snow Leopard install disk will upgrade
I run 10.5.5 and have tried to update my OSX using software upgrade and when I click install it greys out then a few seconds later it turns blue again and nothing happens.
So I purchased Snow Leopard hoping that would fix the problem. Well I insert the DVD and click install Snow Leopard, same thing, I click the blue install button, turns grey then a few seconds later turns blue again and nothing happens so I CANNOT UPGRADE!!
Anyone have some advice where to start?

Hi eastwooddesign;
Upgrading to fix problems usually doesn't succeed and generally make them worst.
Exactly what Snow Leopard disk do you have?
Did you boot from that DVD?
Allan

OS X Snow Leopard restore disks from different conputer.

Similar Messages

Maybe you are looking for