OS X update will not intall due to "Volume does not meet the requirements"

I don't know why my system doesn't meet the requirments to update Mac OS X 10 4.4? I get an error saying:
"Intalling this software requires 156MB of space.
You cannot install Mac OS X update on this volume. This volume does not meet the requirements for this update."
I have 79.6GB of HD space. Am I not intalling correctly??? I have 1G of ram...Maybe I already have an updated version of MacOSX 10.4.4.
How do I check what my current operating system is?

I also have this problem.
I've tried both the delta and combo installers and get the same message. I am 100% certain I have the correct installers because I checked the hashes. Also, the word "server" appears nowhere. I only just updated from Panther as well. I've tried repairing permissions. It doesn't even show up in software update.
Any other advice?
G4 AGP Mac OS X (10.4.3)

Similar Messages

HT1338 New just out of box 2012 Mac Mini - Update to 10.8.2 won't load because "Volume does not meet the requirements of this update."

Just opened box and started using Mac Mini (OS X 10.8.1), Late 2012, Core i5. When trying to update iLife product, was given message that update to 10.8.2 was required. Tried to update, but was given message that Volume does not meet the requirements.

Your computer requires a special Mountain Lion version that it's not available right now, so you have to wait until Apple launches it again

A Pages file will not open due to index.xml not found, what is up with that?

I recently saved a file on Pages 5.5.2. on my IMac hard drive. Now I find that on attempting to open it the file will not open due to index.xml not found. Hoe do I correct this?

I have this issue, as well - although perhaps in a different content. When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message. I am very concerned that I may lose access to some of these files. The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document). I thought I needed to upgrade the old documents to the new Pages, but this didn't work. Does anyone have any ideas? And, I'm not a techie - so you'll need to break it down for me.

Chromedit will not be installed because it does not provide secure updates.

Chromedit will not be installed because it does not provide secure updates.?
what should i do to install this ?
== This happened ==
Just once or twice
== i installing cromedit

Did you install this version?
ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Expect it's due to being at 10.9.1. Mail is still teetering between dysfunctional and non-functional. Advice?

I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

HT201401 New update 7.0.2 disables wifi, button does not turn on. Iphone 4s

New update 7.0.2 disables wifi, button does not turn on. Iphone 4s

Hi there, I was just trying to help you and offer some staight forward advice on this issue
but it seems like Apple didn't like the truth that was being relayed and removed my post!
there are a number of threads on here about the issue, also do a general search and after reading for a few hours you will find out what I tried to relay to you before Apple unreasonably removed it
good luck!

10.5.7 This volume does not meet the requirements for this update.

First, 10.5.7 is not showing up in software update. I downloaded both the delta and combo 10.5.7 updates and they both give me "This volume does not meet the requirements for this update." I've done all the requisite stuff, permissions, volume check, reset PRAM, etc. I've downloaded the updates several times, and they worked on my 2008 iMac and 2007 Macbook Pro, so I know they work. I've searched and searched and can't find a resolution. It's as if there is some signature written to my boot volume that is preventing this update. Applecare was of no help either. Any ideas?

Hi! Im new to this forum and i really dont know if this is the right place for me to say this but i really need some help! I have a MAc OS x 10.5.7 and had bootcamp installed on it so i could run both windows and mac! Over the last few days ive recieved a trojan virus on my windows... so i deleted my partition on mac so i basically just had Mac... now i am trying to reinstall my partition but disk utility is saying that i have an invalid volume free block count as it should be 41189365 instead of 41182017....argh! ive read the help stuff on it and it suggests me removing everything off my mac... but will i need 2 still have the mac install disc 1 to hand? as i have currently misplaced this and im ripping my hair out! Ive never had problems with my Imac until now and im really worried! I could really do with the help! Thanks Sam

After updating Photoshop yesterday the program does not open anymore. Program does not respond

After uodating Phtoshop yesterday, it does not work anymore. Program does not respomd

Thanks for your help! I tried your suggestion but only switched off the firewall (although just swichting-off of the firewall may not help). This did not solve the problem.
But! I was able to solve it! A friend came up with the idea. It was a profile problem. Somehow, the profile information must be damaged (and he explained me, that this ocures sometimes when updating from firefox 3 to 5). I dont know what is going on there. However, after creating a new profile everything was alright and firefox 5 works now!
If firefox does not open and you want to create a new profile:
-right click on the firefox icon
-properties
-shortcuts
-check if the "target" is correct (the exe.file is at this place on your machine)
-if yes: add after the target: [space]-p
-apply and ok
-now start firefox, this will open the profile manager
-create a new profile
-apply
-open firefox again and it will work (at least in may case).
Hope this is a help for all who have the same problem. I am very happy now and looking forward to enjoy firefox 5.
Thanks a lot! And good luck for everybody trying to solve computer problems!

HT5567 my i phone 5 has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone

my i phone 5 has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone

What is showing on the iphone screen?
Try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
Make sure itunes is updated to the lates version on the computer.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

HT2638 since updating iPhoto it has ceased to open. i have tried to Hold down the Command and Option keys on the keyboard but it does not work. iPhoto still does not open

Since updating iPhoto it has ceased to open. I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library, but it does not work. iPhoto still does not open. can someone please help?
thank you

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Happy Holidays

Unable to update when executed, table gets lock Execution does not stop Execution even for an hour

Following is my Query unable to update when Executed table gets lock Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, THANKS IN ADVANCE.

Hello,
You should better post your question to a more related Forum, like Transact-SQL or SQL Server Database Engine; this Forum is for samples & community Projects.
Have you checked the execution plan if indexes are used?
You could update the data in chunks, e.g. 10.000 rows per execution. For this you have to add a TOP clause and a filter to update only those, who are not updated yet.
update TOP (10000) Employees
set Status = 'Close'
where statusid IN
(select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000')
AND Status <> 'Close'
Olaf Helper
[ Blog] [ Xing] [ MVP]

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

OS X update will not intall due to "Volume does not meet the requirements"

Similar Messages

Maybe you are looking for