OS X Version 10.6.8 Support Going Away?
A few minutes ago, in the upper right corner of my computer, there was a brief message that might have said something about no longer supporting the operating system on my computer. By brief, I mean maybe two seconds. I was reading something at the time and barely caught a few words on the message. What did I miss?
Technically, it's no longer supported. From the AppleCare TOS:
3.3 Technical Support
During the Coverage Period, Apple will provide you with access to telephone and web-based technical support resources. Technical support may include assistance with installation, launch, configuration, troubleshooting, and recovery (except for data recovery), including storing, retrieving, and managing files; interpreting system error messages; and determining when hardware service is required. Apple will provide support for the then-current version of the supported software, and the prior Major Release. For purposes of this section, "Major Release" means a significant version of software that is commercially released by Apple in a release number format such as "1.0" or "2.0" and which is not in beta or pre-release form. The scope of technical support provided to you will vary according to your Plan.
Regards,
Gnomish8
Similar Messages
-
I heard that there will no longer be support for 8.0.5. Can anyone confirm this? And hard evidence would be good.
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Justin Cave ([email protected]):
Obviously, your 8.0.5 software will continue to work for the forseeable future, but product updates will stop shipping. If you're going to want these updates, you'll have to upgrade to 8.0.6 (or to 8.1.6 or 8.1.7).
As far as your existing databases go, there shouldn't be any problem with the upgrade. 8.0.6 should be fully compatible with 8.0.5.
Justin Cave
ODBC Development<HR></BLOCKQUOTE>
So, it should be safe to migrate my database to O8.0.6. The full version is here in this website. Do I need to clear any admin stuff before downloading it? Or would it be better if I order from my local supplier?
null -
Is support for iWeb going away with MobileMe?
Is online support going away for iWeb? Do I need to go with a third party server now that MobileMe is dead? What server is the least obtrusive?
What version of iWeb were you using? V2 let you publish to MobileMe or a folder on the Dekstop (where it coulb be uploaded to an ftp server) and V3 had options for publishing directly to MMe, an ftp server or a folder on the Desktop.
That being said it is now is apparent that iWeb, and iDVD, will no longer be supported by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD. iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ RSS Feed Widget
All of these issues can be replaced with 3rd party options.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
I would imagine that iWeb and iDVD will be dropped from future boxed versions of iLife if there are boxed versions. However, there may be some copies of the boxed iLife 11 still on the shelves that would include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
OT -
When I try to play a You Tube video in Safari it tells me my version is no longer supported and I should download a newer version of Safari. I have OSX10.8.5, and my Safari is 6.2.3, and apparently it's up to date. What's going on? Should I just give up and use Chrome or Firefox, which work fine?
Thanks,
RichardYour USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/6.2.3 Safari/537.85.12
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted. -
A later version of Apple Application Support is already installed on this computer.
I am trying to update / install iTunes 12.0.1.26. Apple Application Support will not install because it says there is already a later version installed. There is not! I have uninstalled after initial message and tried to reinstall but I still recieve the same message.
Good Afternoon, JohnHT2!
I think I have the fix to your issue.
I've been experiencing the same issue as you describe above. The issue occurred for me during the upgrade process from version 11.4.0.18 to version 12.0.1.26 (which is the current version downloadable from Apple). The installation sometimes appears to be okay, but the Apple Application Support fails to update correctly. In other instances, the iTunes installation fails completely with error 1603 (which is generic "fatal error" code).
Symptoms:
Just some of the symptoms I've noticed in my environment.
- In Programs & Features, there is no Apple Application Support to uninstall.
- In Event Viewer's Application log, you may see Event ID 10005 from Source MsiInstaller, stating the dreaded error message "A later version of Apple Application Support is already installed on this computer."
- In Event Viewer's Application log, you may see Event ID 1000 from Source Application Error, stating "Faulting application name: MsiExec.exe" along with a bunch of other error details.
- When attempting to start iTunes, you may receive popup error "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again".
- Uninstalling and installing iTunes fails, including via the steps described for a "full uninstall" as described here on the Apple site (for instance: Troubleshooting issues with iTunes for Windows updates)
- Installing Apple Application Support via the extracted MSI (AppleApplicationSupport.msi) fails with the same error: "A later version of Apple Application Support is already installed on this computer."
- Installing previous versions of Apple Application Support fails with the same error (tried versions 10.7.0.21, 11.0.0.163, 11.0.1.012, 11.0.3.42, 11.1.0.126, 11.1.3.8, 11.2.2.3, 11.3.0.54, 11.3.1.2, 11.4.0.18). (now that I know the issue, I'm confident any previous version of the installer will fail).
- If you run the MSI installation with verbose logging, you may see lines stating: "PROPERTY CHANGE: Adding BNEWERPRODUCTISINSTALLED property. Its value is '1'." and "PreventDowngrade. Return value 1."
There may be other indications, but these are things we ran into. I'm trying to be detailed so that other folks who run into this issue may feel better about the below fixes being an option for them.
Resolutions:
I've found two ways to remedy the issue in our environment. You can either use the Microsoft FixIt utility to clean up the previous installation for us, or you can edit the registry manually to repair the installation. We're in an office and prefer not going computer-to-computer to fix everyone's issue independently, so we had to go via the registry. I was able to fix it via both ways, though.
Fix 1: Run the Microsoft Program Install Uninstall Troubleshooter.
For this fix you will need to be logged in as an administrator for the computer.
Here are the steps:
Download and Run the Microsoft Program Install and Uninstall FixIt: [FixIt Link]
In the troubleshooter, choose: Detect problems and apply the fixes for me (Recommended)
Choose Installing
From the list, select Apple Application Support and click Next. (it actually does appear here!)
Select Yes, try uninstall. This step could take a while to process once it starts.
Once it confirms it is fixed, click Next.
Select "Yes, the problem has been fixed" and click Next.
Finish/close the FixIt tool.
Now the Apple Application Support will install successfully on your next attempt.
- If you don't have iTunes installed, you can simply run the latest downloaded installer: iTunes64Setup.exe
- If the other iTunes components are already installed, you will need to go to Programs & Features (or Add/Remove programs) and uninstall the iTunes program, then re-install the program from the downloaded installer: iTunes64Setup.exe
- If you have the MSI, you can simple run AppleApplicationSupport.msi and carry on happily. Make sure it's the right version of the MSI (right-click it, select Properties, go to the Details tab and verify the Comment line says "Apple Application Support 3.1"). If you don't know what an MSI is... ignore this and use the installer.
iTunes should work perfectly normally for you now.
Fix 2:
If you're like me and you need to repair iTunes over a larger number of computers, then Fix 1 quickly becomes too time consuming. Thankfully, a quick registry edit will resolve the issue as well.
For more advanced users; if you're not sure what the Windows Registry is, please tread very carefully and make sure you back up the registry before you change anything!
You'll need to be an administrator on the computer to do this.
Start Registry Editor.
In Windows 8.1, you can right-click the start menu (flag in the bottom-right corner) and choose Run. Then type "regedit" and click OK.
In Windows 8, go to the Start menu, click the magnifying glass (or just start typing) and search for "regedit". The first result should be "regedit.exe" - click that.
In Windows Vista, click the Start menu, then click the little arrowing pointing to the right (>) and choose Run. Then type "regedit" and click OK.
In Windows 7 or XP, click the Start menu orb, and choose "Run...". Then type "regedit" and click OK.
Make a backup of your registry.In Registry Editor, right-click on "Computer" and choose "Export". Save the file somewhere on your computer. You'll probably never need it.. which are famous last words. Better safe than sorry!
Navigate to HKEY_CLASSES_ROOT\Installer\Products\ED0FAC38B3D873C46A13B2F861CE0313\
If the key "ED0FAC38B3D873C46A13B2F861CE0313" doesn't exist, then go to HKEY_CLASSES_ROOT\Installer\Products and make sure "Products" is highlighted.
Go to the Edit menu and choose "Find...".
Do a search for "Apple Application Support".
Your first result should be a ProductName value of "Apple Application Support".
Verify at the very bottom of Registry Editor that your current location is "HKEY_CLASSES_ROOT\Installer\Products\[GUID], where GUID is an alphanumeric string that's 32 characters long.
Right-click "Version" and choose "Modify".
In Value Data, type 0 (the number zero) and click OK.
Close Registry Editor.
You should now be able to successfully install the AppleApplicationSupport.msi or re-install iTunes. If, for whatever reason, it still detects the wrong version, go back to the Registry Editor and delete the entire key from above (so, right-click on the 'folder' named "ED0FAC38B3D873C46A13B2F861CE0313" and select "Delete"). Should never be necessary, though..
In a Windows domain there are many ways to update the registry so use whatever works best for you. I'll be adding this as a special extra step in our SCCM deployment.
I hope this helps! It took us a good many hours to track down what was stopping us from resolving the issue (and/or causing it to begin with). Suffice to say we now have a whole bunch of users who are very happy to no longer get iTunes error messages when they log into their computers or attempt to start iTunes itself.
Have a great day! -
A later version of Apple Application Support is already installed on this computer - dead lock
Hello,
trying to solve itunes problems, i tried to completely uninstall itunes, as mentioned in article
http://support.apple.com/kb/ht1925?viewlocale=es_ES
(uninstall modules in order, verify uninstallation, reboot, and reinstall itunes)
However, it wasn't possible to reinstall itunes. Digging in forum i found a method to install part by part the application, by means of unraring the installer .exe file and executing modules independently.
The fist module: AppleApplicationSupport.msi won't install, because it does a check (erroneus check!!) and detects an inexistent version of Apple Application Support. It shows message: "A later version of Apple Application Support is already installed on this computer", and goes out.
After that, i can install itunes, but do not work.
I tried cleaning registry with msicuu2.exe, as mentioned somewhere to eliminate Application Support rests, but doesn't find any Application Support Installation.
Locked. Can't use iTunes.
Please, any help
Thank you very much.Not yet. I tried apple telephone support, but couldn't get a definite answer.
In my opinion a installer program should try to install in every case, overriding any version that could be degraded. It's a nonsense that a installer program goes out without installing, suposing there are no degradation issues of the installation software.
Also, i think KB article http://support.apple.com/kb/ht1923 may need a correction, as it doesn't work fine always, and the cure is worse than the disease. -
Hello:
I attempted to follow instructions given by a previous answer that addresses the same problem I have, but without success: Deactivation, cant reach computer it was activated on and Adobe "support" goes in circles and ends up in forum where Adobe cannot deactivate for me
Following Contact Customer Care did not lead me to chat option that I could spot. I'm sorry if I missed a link that is obvious to everyone but me. Maybe I just need that link pointed out to me more vigorously.
By the way, this link, What are my contact options? has a chat option, but it is grayed out (at least for me) so that's a dead end.
So, please explain to me (like I'm a bewildered child) how to get to chat support. I am unable to fill in logical gaps by myself. :-/
Thank you SO much. :-)
That's it for my question. The rest is just a boring account of how I struggled to get here. Which I include just in case an Adobe Staff Member would find my customer-experience worth noting.
I reached Shivangi Moitra (Adobe) [email protected] by sending feedback about the dead-end support loop that I encountered by following the steps here, at www.adobe.com/getsupport. Incidentally, I gave her a detailed description of my deactivation problem too. Shivangi responded by directing me to use the same link that goes in circles! To wit: "The first step for contacting us will be to start online [at www.adobe.com/getsupport]." Of course you notice that this is yet another dead-end circle in the customer support system.
If my email to Shivangi is a useful reference then here you go!
I am unable to get online or phone support from Adobe. I need to deactivate CS4 from a dead computer. Adobe online help is defective because it puts the user into an endless loop making it impossible for me to find a solution, and impossible to get support. Please remedy the defect and please call or email me to manually update Adobe's activation database. (Phone and email address redacted.)
I own a copy of CS4 that is marooned on dead computer. Consequently, I can not deactivate that copy. I know that a single license for Adobe CS4 only lets me install the application on two computers, of which I can only use the application on one computer at a time.
I need Adobe to manually deactivate my earliest CS4 installation from its servers so that I can activate CS4 again when my new computer dies so that my work flow is not interrupted by the unavoidable (meaning eventual) breakdown of my next computer.
1.) http://www.adobe.com/
2.) login to Adobe
3.) Don't search keyword "support" - worthless, instead go to . . .
4) adobe.com/getsupport which resolves to
5.) http://helpx.adobe.com/contact.html
6.) Pick 'Adobe Creative Suite'
7.) http://helpx.adobe.com/contact.html?step=STEA
8.) Pick 'Downloading-installing-setting-up'
9.) http://helpx.adobe.com/contact.html?step=STEA_downloading-installing-setting-up
10.) Pick 'Licensing-activation'
11.) http://helpx.adobe.com/contact.html?step=STEA_downloading-installing-setting-up_licensing- activation
12.) Pick 'Error: Sign in failed, activation limit, or maximum activation exceeded'
13.) http://helpx.adobe.com/x-productkb/policy-pricing/error-activation-limit-reached-starting. html
14.) Scroll to Error: 'Problems signing out or deactivating?'
15.) Click on link: Can't access your previous computer?
16.) OPENS THIS MESSAGE: Don't have access to the previous computer on which you installed the application? ***CONTACT US***. Be sure to have any purchase-related information ready.
17.) Click on the 'Contact us' link . . . infuriatingly returns you to the start of the loop
18.) http://helpx.adobe.com/contact.html SAME AS STEP 5
I have explored all the other branching available at helpsx.adobe.com . No other branching resolves the problem or gets me support. I explored branching specific to CS4, and branching not specific to CS4, and branching of any kind in search of a solution or support. There is no solution or support available online from Adobe for this problem.
I also called 1.800.642.3623 per https://forums.adobe.com/thread/1030438 which was of no use.
This page was of no use. http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
This 'Let us know how we're doing' form is my last hope.I have same issue: CS 5 on a dead computer. I was able to chat just now with Adobe. I still need to try this to see if I can do as she says.
Chat
Your case number: #######
Here's what we know about your issue so far. It relates to:
Other product or service change
Downloading, installing, setting up change
Licensing and activation change
Thank you for contacting Adobe.
A representative will be with you shortly.
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
You are now chatting with Rachana.
Rachana: Hello! Welcome to Adobe Customer Service.
Rachana: Hi Linda.
Linda : Hello Rachana
Rachana: How may I assist you today?
Linda In 2012 I purchased Adobe Creative Suite 5 to use in my retirement. I installed it only on my home computer as I had different software at work. Now my home computer has died. I cannot get it to start up. I have a new computer and want to install it on that computer. Can you please deactivate the dead software on my old computer so that I can install AND ACTIVATE it on the new one?
Rachana: I will check and help you with this.
Rachana: May I have the serial number for the product?
Linda : mastercollection # provided acrobat # provided
Rachana: Thank you.
Linda : there are also individual serial numbers for 4 other unidentified products on the back of the package discs came in. do you need those also?
Rachana: I have made the necessity changes to the software, you can go ahead and activate without any issues.
Linda: thank you Rachana -
iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??
Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas NowakHi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan -
It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?
That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.
-
So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
ThanksI also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
What version of itunes will support windows 10?
I have a PC with Windows 10 and cannot find a version of itunes that supports Windows 10.
Apparently they're skipping Version 9.
tt2 -
The application version J2EE_1_4_OR_LESS is not supported
Hi All,
What does the below shown exception mean? Please help.
I found the below shown exception in the Netweaver 7.1 logs:
com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder##com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder#Administrator#244####f9b12dc0ca1311dccbed0050568211b5#1 Telnet unknown Wed Jan 23 16:32:01 PST 2008##0#0#Debug#1#/System/Server#Java###The application version J2EE_1_4_OR_LESS is not supported.
No persistence units, if any, will be processed for this archive.
[EXCEPTION]
#1#java.lang.Throwable
at com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder.build(ORPersistenceModelBuilder.java:64)
at com.sap.tc.jtools.jlinee.lib.model.impl.AbstractModelBuilderTest.execute(AbstractModelBuilderTest.java:48)
at com.sap.tc.jtools.jlinee.lib.framework.dependency.Node.execute(Node.java:211)
at com.sap.tc.jtools.jlinee.lib.framework.JLinEETestProcessor.executeAll(JLinEETestProcessor.java:153)
at com.sap.tc.jtools.jlinee.lib.framework.JLinEETestProcessor.execute(JLinEETestProcessor.java:123)
at com.sap.engine.jlinee.lib.impl.TestManager.executeTestsForAppComponent(TestManager.java:153)
at com.sap.engine.jlinee.lib.impl.TestManager.executeTests(TestManager.java:88)
at com.sap.engine.jlinee.lib.JLinEEValidatorImpl.validateApplication(JLinEEValidatorImpl.java:143)
at com.sap.engine.services.deploy.server.validate.jlin.impl.JLinPluninImpl.exec(JLinPluninImpl.java:78)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.validateApplication(DeployUtilTransaction.java:342)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:241)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:215)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:384)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:418)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:2194)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:318)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:275)
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:109)
at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:113)
at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:55)
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:160)
at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:48)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:178)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:77)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:631)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:488)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:209)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:154)
at com.sap.engine.services.dc.cmd.telnet.impl.deploy.DeployerCommand.exec(DeployerCommand.java:238)
at com.sap.engine.services.dc.cmd.telnet.impl.deploy.DeployerCommand.exec(DeployerCommand.java:181)
at com.sap.engine.services.shell.processor.environment.CommandBase.exec(CommandBase.java:132)
at com.sap.engine.services.shell.processor.Interpreter.applyLineCommand(Interpreter.java:401)
at com.sap.engine.services.shell.processor.Interpreter.apply(Interpreter.java:153)
at com.sap.engine.services.shell.processor.Shell.work(Shell.java:148)
at com.sap.engine.services.shell.processor.managers.ShellProcessThread.run(ShellProcessThread.java:114)Please refere back to your installation guide for your respective Netweaver System. NW 7.1 is not compatable with Java 1.4, it requires at least a java version of 1.5 to operate. If you use the 'java -version' command, this will tell you what your current java release is.
If this answers your question, please set this thread to answered. -
What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH)
Hi,
I just want to know,
What version of SQL Server support ssl connection with TLS. 1.2 (SHA-256 HASH).
if support already,
how can i setting.
plz. help me!!!The following blog states that SQL Server "leverages the SChannel layer (the SSL/TLS layer provided
by Windows) for facilitating encryption. Furthermore, SQL Server will completely rely upon SChannel to determine the best encryption cipher suite to use." meaning that the version of SQL Server you are running has no bearing on which
encryption method is used to encrypt connections between SQL Server and clients.
http://blogs.msdn.com/b/sql_protocols/archive/2007/06/30/ssl-cipher-suites-used-with-sql-server.aspx
So the question then becomes which versions of Windows Server support TLS 1.2. The following article indicates that Windows Server 2008 R2 and beyond support TLS 1.2.
http://blogs.msdn.com/b/kaushal/archive/2011/10/02/support-for-ssl-tls-protocols-on-windows.aspx
So if you are running SQL Server on Windows Server 2008 R2 or later you should be able to enable TLS 1.2 and install a TLS 1.2 certificate. By following the instructions in the following article you should then be able to enable TLS 1.2 encryption
for connections between SQL Server and your clients:
http://support.microsoft.com/kb/316898
I hope that helps. -
What is the earliest version of Acrobat that supports navigation buttons?
My navigation button disappears in pdf.
(this happened when I enabled comments in an interactive PDF.
What is the earliest version of Acrobat that supports navigation buttons?
I can set the export of InDesign to match this version?
For example, if I am on InDesign CS5 or 6, what export do your recommend.Ask in the Acro/ ID forums. Navigation requires PDF level 1.6 or 1.7, if I'm not mistaken, but beyond that I have no idea.
Mylenium
Maybe you are looking for
-
I'm trying to re-install Photoshop Elements 6
I'm trying to re-install Photoshop Elements 6 having bought a new computer and it's telling me my serial number is invalid - but the serial number is the one recorded enemy account on the website: what's going on?
-
HT5696 How do I add my apple TV to my my registered applecare plan?
I have already registered my applecare protection plan for my MacPro, which I have bought two months ago. how do I add my Apple TV to my registration. i tried to do it separately using the registration number of my plan to receive the message that it
-
Table Name for Date Profile & SLA
Hi, What is the table name for Data Profile / Date Type etc and also for SLA tables? Rgds, VR.
-
Hi Guys, I want to execute a procedure I have created at a certain time. I mean I want to schedule a procedure to execute at a specified time. Please help me in doing this? If there any package available in oracle to set the execution time of a proce
-
This seems strange to me, but maybe I'm missing something. I can't resize the panels horizontally if the "inspector/library/file browser" pane is shown. At the same time, maximizing the window sends the bottom of the motion window behind the dock,