OS X Yosemite Glitches in PS. HELP!

After my recent upgrade to OS X Yosemite, I'm experiencing frequent and consistent glitches in PS. 1. The healing brush is painfully slow. 2. I can no longer toggle between foreground and background colors using the "X" key. I've tried resetting my tools to no avail. These issues are most definitely related to the upgrade as they presented immediately afterward and were not present before. This having a very negative effect on my workflow. Any suggestions?

Thank you Chris. CS 6 (Master Collection) 13.0.6 x 64. Haven't had any other issues with OS X Yosemite. I like all the other improvements that have come with it and would really hate to downgrade. Hoping it's a PS compatibility issue with Adobe that will be resolved soon.
More specifically on the above problems:
Healing brush - delays after each stroke. Brush remains visible (as a black mark) without revealing the result until I move to a new area/stroke. Prior to OS X, updates were immediately visible, without delay, after stroking the healing brush.
Foreground/Background Toggle using keyboard shortcut of "X" - I typically use this when painting on a layer mask. Worked flawlessly prior to OS X. Now, I have to manually toggle foreground/background or click on different tool and then back to the brush again, before "X" will act as a shortcut to toggle foreground/background.

Similar Messages

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not get through at Yosemite. Can someone help me there?

Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?

They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep."

My safari and my app store don't open in yosemite. Can you help me?

my safari and my app store don't open in yosemite. Can you help me?...

You probably ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below. If you use any iWork applications, you may need to delete them and redownload them from the App Store.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I have a error code 150:30 on a Mac running Yosemite 10.10 any help?

Thanks!

In that case I will need the serial number to re launch Illustrator correct? I have no clue where that number is and it was purchased by a former employer of mine. Thanks for your help.
Sent from Yahoo Mail on Android
From:"Larry G. Schneider" <[email protected]>
Date:Sat, Feb 28, 2015 at 12:07 AM
Subject:[Illustrator] I have a error code 150:30 on a Mac running Yosemite 10.10 any help?
I have a error code 150:30 on a Mac running Yosemite 10.10 any help?
created by Larry G. Schneider in Illustrator - View the full discussion
Uninstall, run the Cleaner tool and reinstall.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7238126#7238126 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7238126#7238126
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

OS X yosemite glitches NEED HELP

Once I've up graded to OS X Yosemite Ive noticed multiple problems:
I can only start my computer in SAFE MODE (computer does not work normally)
When the loading screen comes up it FREEZES (everything freezes)
when logging in (freezes)
after typing my password the loading bar doesnt even load all the way and it freezes
when on safe mode half my screen is blinking
also no sound
I've restarted my computer countless times, same thing over and over I cannot use my computer. anyone know what I should do? this is tiring
not sure if im the only one with this problem but hope someone can help

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.SafariNotificationAgent com.apple.usbmuxd com.apple.xprotectupdater com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2636415542 842973933 4019080058 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How can I get my Bluetooth to connect? I took it to the apple store in San Francisco and got horrible service and my phone still doesn't work in regards to Bluetooth and glitches ? Please help

I am very disappointed, I can not connect my Bluetooth to any device (ie. beatpill) and I took it to the store they reset my phone and told me everythibg should work and it turns out that nothing works. Not only the Bluetooth but my phone glitches while in use (ie. It freezes, it'll reset randomly, and the apps freeze or won't close, whrn texting it will close out my messages) things of that nature. Please help because thus far no one else has and it has become a problem for me to use my phone.

What does the beat pill manual say on how to pair to iphone?
We have no issue connecting an iphone 4S/5/5S or 6 to it.

Mac is extremely slow after yosemite update, really need help. (Etrecheck inside).

After recently installing yosemite my mac been painfully unresponsive and slow. I cannot boot up in normal mode, i'm currently in safe mode.
What I have tried so far and what I know:
Initially thought filevault was the issue, I disabled encryption and now it says "decryption is paused" and hasn't resumed in days. Potentially is the issue.
I run a hardware diagnostic test using the hardware check within the macbook pro (booting up holding D) and the mac didn't identify any hardware issues.
I reinstalled yosemite (not a clean install) and the issue was not resolved.
I have completed a backup of my mac so all my data is secure.
Any help would be great, even just telling me how to turn on filevault will be helpful.
My etrecheck:
EtreCheck version: 2.0.11 (98)
Report generated 23 November 2014 20:15:11 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:11:9
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (268.58 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Samsung M3 Portable Samsung M3 Portable 500.11 GB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Backups (disk2s2) /Volumes/Backups : 494.35 GB (264.39 GB free)
Recovery HD (disk2s3) <not mounted> [Recovery]: 650 MB
GeneralUse (disk2s4) /Volumes/GeneralUse : 4.63 GB (4.60 GB free)
MOSART Semi. 2.4G Keyboard Mouse
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.caiaq.driver.NIUSBTraktorKontrolS4Driver (2.6.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d12 - SDK 10.8) Support
Startup Items: ℹ️
DoubleCommand: Path: /Library/StartupItems/DoubleCommand
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[invalid?] org.thebends.iphonedisk.mobile_fs_util.plist Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.watchdogd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.mcafee.menulet.plist Support
[not loaded] com.mcafee.reporter.plist Support
[not loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[not loaded] org.pqrs.KeyRemap4MacBook.server.plist Support
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist Support
[not loaded] com.bombich.ccchelper.plist Support
[not loaded] com.DesignScience.DSMTTool.plist Support
[not loaded] com.ea.origin.ESHelper.plist Support
[invalid?] com.mcafee.ssm.Eupdate.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[not loaded] com.mcafee.virusscan.fmpd.plist Support
[not loaded] com.mice.360Daemon.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[not loaded] com.oracle.java.Helper-Tool.plist Support
[not loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
FilesWarwick Application (/Users/[redacted]/Downloads/FilesWarwick.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Flux Application (/Users/[redacted]/Applications/Flux.app)
uHD-Agent UNKNOWN (missing value)
uTorrent UNKNOWNHidden (missing value)
Google Chrome UNKNOWN (missing value)
wine Unix Executable File (/Applications/Wine.app/Contents/Resources/bin/wine)
proXPN Application (/Applications/proXPN.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Safari Extensions: ℹ️
LinkThing
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
MacFUSE Support
Native Instruments USB Audio Support
XBox 360 Controllers Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 230.30 GB
Destinations:
Backups [Local]
Total size: 495.00 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 495.00 GB < (Disk used 230.30 GB X 3)
Top Processes by CPU: ℹ️
      86% corestoraged
      45% WindowServer
      34% Google Chrome
      10% com.apple.preference.security.remoteservice
      9% xpccachectl
Top Processes by Memory: ℹ️
177 MB xpccachectl
170 MB Google Chrome
137 MB Microsoft PowerPoint
87 MB WindowServer
82 MB spindump
Virtual Memory Information: ℹ️
26 MB Free RAM
1.45 GB Active RAM
1.44 GB Inactive RAM
674 MB Wired RAM
3.07 GB Page-ins
167 MB Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

"show photo settings" and ken burns glitch? please help :(

hi, i'm having a problem,
my software is the latest version, so is quicktime, all my updates are up to date, i'm not using an external hardrive.
i was creating a music video composed of all still pictures and everything was going fine untill today.
the "show photo settings" display box has a glitch or something.
the slide bars for the ken burns effect have disappeared.
a checkmark on the imovie display is now visible and the apply and reverse buttons have disappeared.
i can no longer exit out the photo settings window the same way as before.
when pictures are added to the timeline they are much too long.
i'm unable to keep the ken burns affect box checked, it keeps unchecking itself and it wont allow me to change any photo settings on certain pictures and on the ones it will allow me to when i press "apply" or the checkmark it stalls and wont render the file (the red line doesn't fill and just stays there)
when changing the length or display time of the picture it will delete itself and replace it with the next picture in line.
can anyone help me? i've spent a massive amount of time on this video and would like to finish it. i dont know what the problem is. maybe i clicked something i shouldn't have?
thanks in advance

i'm estimating around _1000 pictures_ ... they are all being stored on the desktop ...
WOW!
... how long does your poor Mac need for booting??
The >40y old Xerox metaphor of a Desktop/Folders/trashbin had the concept of simulating reallife.. would you store ~1000 pics on your desk while glueing them into an album (ever glued 1k pics into an album?) ...?
I assume, your System is 'cluttered'. totally cluttered.
try to clean up ... in Finder, clean your File 'System'... create folders (many folders...), use the pre-installed structure your Mac came with (how about storing pictures in... ehm, Pictures?), why not using iLife as intended (import into iM from iPhoto), why not using the integrated 'File Management' of iPhoto to create albums, to give your mass of pics some structure, finally consider to use approbiate apps (if you try to create a stopmotion-like movie, QTpro or Boinx' istopmotion are better tools) ...
keep in mind, a Mac needs at last 10-15GB free on internal drive to act normal.
export as much as you can to external drives (firewire connected, 'MacOsExtended' formatted), don't forget to give these harddrives structure too .. you know how to create Folders in Finder?
after all is set and done, your desktop is clean, everything is in its place, use Disk Utility to check&repair... finally, reboot your Mac, give it a chance to 'recreate' itself in better shape
... and there's still a high chance, that the fragile file management of the 20$ consumer app iMovie is still overwhelmed by >1000 stills in one single project...

Illustrator CS4 no longer previews fonts in Character palette after Yosemite upgrade..Please Help

Illustrator CS4 no longer previews fonts in Character palette after Yosemite upgrade
Please help...Thanks

inkydmark,
You may wish to roll back from Yosemite and wait to see whether the issues will be solved and reported as such.
Weeding out in older plugins seems to have helped some in some cases. It also seems that JAVA Runtime may be involved, for some it seems to help to roll back to an ealier version, for others to update to the newest.
All the above is more or less hearsay so far, with no definite final confirmation.
In any case, there is something to be sorted out by someone. Yosemite was made long after CS4, so it may be difficult.
There is a way round an even worse issue shown in post #2 here:
https://forums.adobe.com/thread/1610655

Why does my Mac hang at some point? The startup is slower than usual and sometime's the graphic glitches occur. please help!

My mountain lion OS hangs like windows does and sumtimes have visual glitches like the drop down menu's are half visible. Sometimes it slows down at every point. And its just 2 months old. Please help.

Isolating Issues
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try a restart.
Run Disk Utility/Repair Permissions. Run until it reports no errors. If there is a recurring error, see the article on what permission errors can be ignored.
Disk Utility
Disk Utility Repair Permissions You Can Safely Ignore
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac
Upgrade Nightmares

Camera Glitching Problem? Help!

I'm fairly new to AE and watched a tutorial on making a nebula thingy. I made it fine and have had no trouble, but for the last 2 days i have spent trying to fix my camera glitching problem. I have to keyframes for my camera, obviousl ythe start and the finish keyframe. But in the keyframes, my nebula thing, keeps glitching back to previous frames. Im not really good at discribing it, so i just screen recorded it so you could see. I have checked countless times to make sure there is no keyframes on anything else, there isn't. I lookoed it up, some say it could be the "boomerang effect" I tried to chhange the keyframes to linear keyframes (as they are at the time of the screen recording), obviously still glitching. I also tried to change the keyframes to "hold keyframes" as another suggested solution, i still get random glitching. So as a final solution, here i am. Not sure if you need to know the stats of my computer, but if you do here they are (iMac late 2012/early 2013, 3.7 Ghz, i7, 8gb of ram, NVIDIA GeForce GTX 680MX 2048 MB). I have also exported the project to a mov file, the glitches are still there. Also, it is supposed to stop abruptly like that at the end.
Here is the link to the screen recorded problem:
http://youtu.be/dmU0YSfI-Es
Also, im using After Effects CS6, Knoll lIght Factory, Trapcode Particular and Trapcode Shine.
Thanks, Hope someone could help.

Turn off GPU mode in Knoll and/or in AE by setting the comp viewer to Final Quality. that's some sort of buffer curruption, most likely hardware related... also make sure you are not having other programs running. Even a simple notification pop-up from a messenger can cause such strange artifacts because it temporarily takes the reigns...
Mylenium

Can not open iPhoto now that Yosemite is in place HELP..

Loaded update and now am without iPhoto....can I trash iPhoto and reinstall? Might that help.....right now when I hit open it goes to update library and stops responding.........left it 24 hours to see if it was actually process or just stuck....just stuck was the answer.....Don't want to lose my photos nor access to them.....I am not a computer person therefore got Apple so that I life would be easy....guess I was wrong....any help you can provide would be appreciated.
C

You need to update iPhoto to version 9.6 for Yosemite.
If you do not see an update on the AppStore Updates page, move the iPhoto application to the Trash (don't empty the Trash), then sign into the AppStore and download Photo from the main, "featured" tab. Type iPhoto into the search field.

OS X Yosemite on exetrnal drive HELP

Hello! i need your help.
something when wrong on may macbook air and when i woke up today my screen was completely black, with only the mouse cursor being visible. i called apple support and they told me to reinstall the software (by pressing command + r). i did that but i didn't have enough space on the computer for the installation (and i could not go back and delete some films, because, well, the screen was black when i tried to turn on the computer). so i had to install it on my external drive.
now, i don't want it on my external drive . . . i can't have the drive plugged in at all times and i really want it to just be on computer. how can i do that?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

OS X Yosemite Glitches in PS. HELP!

Similar Messages

Maybe you are looking for