Os10.8 does not recognize hp 4000 printer

My iMac with OS 10.8.4 does not recognize my HP LaserJet 4000tn on my ethernet network.  I have downloaded Apple's latest version of HP printer drivers 2.14. Have been on the phone with tech support-not helpful.  Have tried to connect with USB cable...no diffence.  Entered the IP address and found the printer on the pull down but received the message "Unable to verify the printer on your network."  I would really like to continue to use this printer with my new computer.  Is there a solution?

Just to add more detailed info on hooking it up via Ethernet. This is for a 5000N, so the finding and printing out the IP address of the printer may be a bit different, but otherwise should work the same.
1) At the printer. Press the Menu button to the right once so the display reads, "Information Menu". Press the Item button twice to the right so the display reads, "Print Configuration". Press the Select button. The printer will kick out two sheets. On the first page under the "Printer Information" heading is the IP address for your printer. It's the second entry from the bottom labeled, "HP JetSend Address: ip: 192.168.5.6 (your actual address will of course be different).
2) In the "Print & Fax" heading of the System Preferences, remove any entries for the 5000. Click the Add button and then the IP button. Under the Protocol pull down menu, choose "HP Jet Direct - Socket". Under "Address:", enter the IP address on your printout, like my example of 192.168.5.6. Under "Name:", put in something meaningful, like "HP LaserJet 5000N". Assuming you have the PPD installed, then under "Print Using:' choose "HP LaserJet 5000 Series". Click the Add button.

Similar Messages

  • Westell 327W gateway does not recognize Brother network printer

    The Westell 327W gateway does not recognize Brother network printer model MFC-490CW.  Any idea?

    I took a look at the Brother www site and would recommend the following:
    Temporarily Connect the Printer to the Network with an Ethernet Cable
    Run the Brother Installer Application to reconfigure the printer for Wireless (CD That Came w/ Printer)
    You will need the Network Name (SSID) and Passcode (WEP Key) from your Router.
    Once configured you will be able to disconenct the Ethernet Cable and use it wireless.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • After updating to the ladtest OS my iPhone most time goes blank when I unlock it and does not recognize my finger print not show the passcode to enter. Screen just brightens up and stays blank.

    after updating to the latest operating system on my iPhone 5s, often my screen goes blank and I am unable to unlock my phone. The phone becomes completely non responsive . Since I have the soft touch home button enabled I will either call Siri and ask to open an app which solves the issue or if I don't have Internet then the only solution is to switch off and then switd

    Hello there, Prashanthds96.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with an iPhone not turning on:
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Firefox does not recognize my finger print reader for passwords

    My lap top has a finger print reader into which I code all my passwords. When I use Explorer my finger print reader works fine, but when I use Firefox as my browser the finger print reader does not work

    I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

  • My iMac with Mavericks update does not recognize my brother printer and I cannot even add the printer info in the system preferences printer list.  What is WRONG?

    I had to buy a new printer when I got my Imac and I chose the Brother multifunction inkjet MFCJ470DW.  It worked fine when my Mavericks version was 10.9.1, but after the automatic update to 10.9.2 the computer no longer recognizes the brother, or says it isn't connected, and when I deleted it from printer preferences and attempted to re-enter it as default printer, I cannot even type anything into the list of printers when I press the + sign to add.  What am I doing wrong?  Can someone please tell me even how to add text into the printer preferences list? 

    I had some of the same issues your having, deleted the printer from Printer and Scanner in System Preference.
    What I ended up doing was connecting the printer with a USB cable like it was a new set up, down loaded the drivers from Apple, still did not seem to work, but did a coupel of restarts and the printer was found then I completed the set up.

  • Adobe Reader 10.1.3 does not recognize the windows vista installed printer

    I am using the latest version of Adobe Reader. When I print I get a message box that says you must install a printer driver. I have a printer installed in Windows Vista Home Premium that works ok with all other programs.  Any ideas?

    All updates applied to ver 10.1.10.  Same problem - does not recognize the network printer.  When I first installed this version and the Software License Agreement displayed it allowed me to access the printer dialog and print the form. When I open a pdf document after this it does not recognize that there isa printer installed.  Any ideas??? This is getting vdery frustating.  The only good news is that foxit works.

  • CS5.1 does not recognize my Epson R2880 out of the blue.

    Edit  
    Delete
    mary gronenthal   2 hours ago
    photoshop CS5.1 does not recognize Epson R2880 printer--won't print    
    I have Mac X.6.8
    I use Photoshop CS5.1
    My printer is Epson R2880
    I was printing all morning and suddenly I get an error message and CS5.1 will not recognize my printer.  The printer is chosen, and is the only printer on my computer, within system preferences under printer/fax.
    I have reinstalled both the printer and the software with no fixes made. I cannot print from Photoshop CS5.1.  What happened.  Out of the blue. I have used these two products for three years with no problems and now this

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Galaxy Tab does not see HP wireless printer

    My Galaxy Tab and HP D110a are both clients in my wireless network, however, when I try to print an email my Galaxy Tab does not recognize the HP printer.  Please advise.  Thanks in advance.

    Hi,
    1) Are you sending an email to the printer from Galaxy tab?
    2) If yes, What is the exact message you receive?
    3) IS the WebServices enabled on the printer so that it acquires email ID from ePrint sever?
    4) Are you able to print from computer when you send an email to printer ID?
    5) Is the printer email ID added to your account in ePrint Center Website?
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • My computer does not recognize my printer

    Dear Sir/Madam please can you help me my computer does not recognize my printer either by wireless or usb cable although I used to use it and it was good  thanks ayman 

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

  • PSE 10 does not recognize my printer

    PSE does not recognize my printer.

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

  • My mac air does not recognize my printer.

    My wife's mac recognizes our Epson Printer but mine will not.  I have reset the printer settings and it does not recognizes any printers.  Would love some help on this.  Thanks. 

    My wife's mac recognizes our Epson Printer but mine will not.  I have reset the printer settings and it does not recognizes any printers.  Would love some help on this.  Thanks. 

  • My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

    My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

    The Photosmart 5510 is AirPrint capable.  You can find that information linked below.  There may be something in the network that is preventing communication.  To use AirPrint your router needs to support Bonjour services.  Run the download below.  It will let you test Bonjour services from your Windows PC.  If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour.  Let me know what the app finds.  If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
    Bonjour Print Services for Windows v2.0.2
    HP Web Connected Printers and Supported Cloud Services
    I am a printer tech for HP.

  • HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    try disabling email scanning for incoming mail.
    One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Maybe you are looking for

  • Flash sites does not work on iphone safari Can anyone know the alternative

    Hi My name i zain and i am from pakistan .i have iphone 3gs with 5.1 version .iphone is awesome but one main problem which is arising is that iphone doesnot support flash sites . I am student of ACCA so for my studies i have to take online lectures b

  • Restriction on number of invoices to be paid through APP for each vendor

    Hi, We configured APP and print cheques through APP. The output contains invoice wise details ( Payment advice) and the cheque. In case the Number of invoices are more than 10 for a single vendor, it is printing one cheque -- This is OK. But the prob

  • Will not boot past blue screen

    The present status is that my ibook g4 will no boot past the spinning wheel screen which hangs for a few minutes and then goes to the "Mac OS X" screen with the progress bar. My first goal is to back up all of the data. I have a second IMac. Plus, I

  • My Genius mixes is not working. Need help here. please...

    I did reinstall my itunes 5 times and updated my Genius mixes many times as i could and yet the result is the same. i cant have my Genius mixes. Does anyone know how to fix this? please help. Thanks

  • No video from timeline?

    This is a new one for me. When I try to play video from the timeline all I get is the audio until I stop the play and then the still video frame will show on my ntsc monitor. If I play the clip from the viewer it plays back fine. I created a new proj