OS10 Hub - Conversation Display - Grouping emails using title not working

Hello,
One great feature of former blackberry and Outlook is the ability of sorting email together if they are relating the same discussion.
Their is an option for this in my Z10, but it doesn't work well at all. I had a discussion with someone using emails and we exchanged pictures and this kind of thing. The hub groups sometimes two messages together but that's it. There is no reliability or repeatability. And when I deactivate the function it is even worse as the few which were grouped together starts to be as unique entry (which is the expected behaviour under such settings).
Is the "Conversation" Display style working well on your handset ? This is pretty basic thing and my old BB 9800 used to do it properlly...
Thanks for your feedback.

I have the same problem as you.. 
It would be great to imporve this . For now grouping option is not working.

Similar Messages

  • Outlook 2013 sending email using template not working properly...

    I've created several email templates by doing the following:
    open new message
    add some tekst in the body
    save as > oft file
    Now when I open such oft file I add some modifications in the body text and send the message. However, the send item does not contain the modifications I just made, only the text that was included in the template.
    We're using Outlook 2013 SP1 (with all microsoft updates installed) with Exchange 2013 SP1 standalone server. Is this a Outlook or Exchange issue and how can I resolve this?
    Thnx Remco

    Hi Remco,
    Please also try to start Outlook in safe mode and test again to check if this issue continues. To start Outlook in safe mode, press Windows key + R to open the Run command, type
    outlook /safe and press Enter.
    If problem continues in Outlook safe mode, please try creating a new mail profile and reconfigure your email account, then creating a .oft template to test this issue again. For your convenience:
    http://office.microsoft.com/en-in/outlook-help/create-an-outlook-profile-HA102749460.aspx
    Please let me know the result.
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • HI,Have 10.10.3 version email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

    HI,
    Have 10.10.3 imac version- email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

    That helped thanks-
    I was able to solve this by deleting all "Envelop Index*"- and "ExternalUpdates*"-files in ~/Library/Mail/v2/MailData. After that I restarted Mail and let it reindex all mailboxes.

  • Multiple recipient email addresses is not working  for xsl & PDF Attachment

    multiple recipient email addresses is not working properly when
    to list has some external email address and sending xls and PDF file as an attachment.
    Test Scenario:
    (A) Create mail target activity
    1)To email : use the multiple email id with some external domain (ex.
    [email protected] ,[email protected], [email protected])
    2)File attachment with .xls file and this file is sending to mail target as an inputstream(at runtime)
    3)Use all other valid parameter in activity.
    (B) Create a process flow File source to mail target
    Execute the process flow.
    Actual Result: Mail is received by every email account. Only external email account get correct file but other email account(as ([email protected])) attachment files
    displaying message
    �abc.xls� can not be accessed. The file may be read-only, Or you may be
    trying to access a read only location. Or, the server the document is stored on
    may not be responding.�
    When i trying to open xls and PDF file
    Expected Result:
    All type of file attachments should be supported with all valid email address
    (servers).
    Pls help me about this senario:
    What is problem in this case:
    I am sending code
    Session session =getSession(host,port,secure);
    session.setDebug(this._debug);
                   Transport trans = connect(host,port,session,userID,password);
                   Message message = new MimeMessage(session);
                   InternetAddress[] iAddr = null;
                   message.setFrom(new InternetAddress(fromName));
                   iAddr = InternetAddress.parse(toUserName, true);
                   message.setRecipients(Message.RecipientType.TO, iAddr);
                   message.setSubject(subject);
                   //BodyPart messageBodyPart = new MimeBodyPart();
                   Multipart multipart = new MimeMultipart();
                   MimeBodyPart messageBodyPart=null;
    if(dataLocation!=null && dataLocation.equalsIgnoreCase("ATTACHMENT")){
                        String tmpName=fileName;
                        if( inputstream != null)
                                  tmpName = makeAttachment(fileName,inputstream);
                        messageBodyPart = new MimeBodyPart();
                        DataSource source = new FileDataSource(tmpName);
                        messageBodyPart.setDataHandler(new DataHandler(source));
                        fileName = fileName.replace('\\', '/');
                        fileName = fileName.substring(fileName.lastIndexOf('/') + 1,
                                  fileName.length());
                        messageBodyPart.setFileName(fileName);
                        multipart.addBodyPart(messageBodyPart);

    First, when sending your message, the filename should be a simple
    filename, not containing any directory names.
    It sounds like your mail server might be doing some special
    processing of attachments, perhaps to prevent viruses.

  • Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

    Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
    im not sure what to do next - can anyone help?
    im running OSX 10.7.4

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • Change password on the first use - does not work

    Change password on the first use - does not work.
    Created a user and specified 'Change password on the first use' - when user logs in - the 'Change password' window does not pop- up.
    Please advise.

    (APEX 4.0.2) I am running into this same issue - if you don't set the password expiration and locking to 'Yes', the user gets into the app without being asked to change the pw.
    When you do set expiration and locking - after the user logs on with their temporary password, it does take them to the change password page (4155:50) but the username is blank. Because the username didn't get to the page the old password will never match and you get the "Invalid password" message.
    What am I missing? Anyone successful doing this?
    Simple application, default authentication, no javascript, HTTP_SERVER, no ssl.
    Thanks,
    Steve

  • Just bot to conver to Word.  All I get is invite to purchase again.  email links DO NOT WORK!

    HOW DO I GET STARTED?  I JUST BOUGHT TO CONVERT PDF TO WORD.  ALL I GET IS INVITE TO PURCHASE AGAIN.  EMAIL LINKS DO NOT WORK!

    Reply from Keygames.
    Hi David,
    It is a problem with the website. We are working on a solution.
    Best is to go to http://spele.nl for the time being.
    Best regards,
    Lorenzo
    Date: Sun, 17 Nov 2013 01:43:55 -0800
    From: [email protected]
    To: [email protected]
    Subject: Unable to play flash games. All I get is a white box. Does anyone have a solution?
        Re: Unable to play flash games. All I get is a white box. Does anyone have a solution?
        created by Pat Willener in Installing Flash Player - View the full discussion

  • IMovie 10.0.1:  Stabilization doesn't work.  I have tried several times, it just grays out.  Also, fonts, font size, color of title not working.  What's the skinny?

    IMovie 10.0.1:  Stabilization doesn't work.  I have tried several times, it just grays out.  Also, fonts, font size, color of title not working.  What's the skinny?

    PROBLEM SOLVED!
    I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
    Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2!

  • Group emails using Apple Mail

    From time to time I like to inform about 40 people that I have updated my iWeb site. To do this, I have assembled a 'group' of addresses and I send the update information to them.
    It does not appear to be possible to do this using Apple Mail. I have tried breaking the group down into small bite sizes but poor old Mail just can't hack it. It is not up to the job using an internet connection in Australia or in Canada.
    Creating such a group using Gmail Mailplane) does not seem to be possible. Indeed that is a distinct deficiency with an otherwise splendid facility.
    I am always obliged to fall back on my dusty old copy of Entourage which does the job flawlessly. Unfortunately, Entourage does not send the sexy update message so handily supplied by iWeb.
    I have just gone through this again today. Mail did not hack it. It first tried to use the Gmail SMTP server and then the old Dotmac one and finally my ISP provider's outgoing mail server. None of thse worked. Error messages about time outs on Port 25 arrived.
    It would be nice to have the various Apple products working together seamlessly but, in my hands, this is not the case.
    I am using the latest version of all software.
    Any suggestions will be gratefully received and acknowledged.
    David Amies

    Thank you for your time.
    Once one has updated iWeb a three pronged invitation appears on the screen. One of these invites you to 'announce' your changes. If you click on that, Apple Mail fires up with a pre-printed message and a nice little logo. It is up to you to insert any addresses to which you might care to send the notification of your up date.
    Now, I have created a group of addressees in Address Book that I call Blog Group 1. I have arranged this group such that the addresses of members are concealed from other members. This you can do in Apple Mail preferences under 'composing.'
    I then press the send button. Wheels spin and the machine whirrs and I receive a message that it can't be sent and that I should use another server. It supplies a list of possibilities. I try them all with the same lack of success. I no longer have the exact error message to hand and could only get it by sending my stuff out again and thereby unnecessarily bothering my correspondents.
    After messing around with all of this, I use precisely the same group with Microsoft Entourage and hey presto! it works.
    If I can send group emails with Entourage but not with Apple Mail then I hardly think that this can be an issue with my ISP. (I tried to phone tech support today to clarify the point but they are down!)
    Why then not use Entourage and be done with it, I hear you cry? For reasons that I cannot explain, I try to avoid using Microsoft products unless there is no alternative. Apple purports to have nicely integrated software and so why not use that?
    Do you now follow my problem? If you have any further insights, I shall be more than happy to hear them.
    Once again, thank you for your time.
    Cordially,
    David Amies

  • Email and BBM not working

    Hi,
    My email services and Blackberry messenger are still not working, despite the fact that the disruptions of last week have apparently been fixed. However, I am able to access the internet.
    On the setup menu it says that there are two email accounts, but when I click on it, it says that there are no activated accounts and there is only the option for enterprise activation. The Blackberry and 3G sign at the top of the screen are present and in capitals. I have tried pulling out the battery and rebooting. I have re-registered with the host routing table. I have also called my carrier (t-mobile), who have said it is not a problem with them.
    It's been over a week now that my phone hasn't been functioning properly. Can someone please help?
    Thanks

    Hi and Welcome to the Community!!
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! But, I am distressed by one thing...
    s-k wrote:
    I have also called my carrier (t-mobile), who have said it is not a problem with them.
    For them to successfully fob you off that way is, IMHO, inexcusable. Regardless of where the root of the problem is (e.g., the RIM network or the carrier network), your carrier remains responsible for ALL of your services and support. After all, you pay them every month for your services...they are not delivering those services. Only they have the ability to seek for you any support from RIM...you have no direct channel to RIM...only via escalation from TM can you get support from RIM. It is so sad that so many CSR's at carriers are responding like this and fobbing their paying customers off. I encourage you to ring them back up and impress upon them that your service and support contract is with them...and they are responsible for providing that support and service, including escalation into RIM if necessary.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IF NEW VARIABLE IN SQL QUERY, DISPLAYS AS LAST COLUMN + rpad not working

    Hello everybody and thank you in advance,
    1) if I add a new variable to my sql query to select a column which was already in the table, it shows it in the report table as the Last column to the right. That is, if I add "street" to
    something like city, postcode, street, store, manager, etc, instead of placing street between postcode and store, it places it as i said as the last column to the right.
    2) When values are entered into the cells of the tables, yes, they do expand it to their needed lenght, But, only if it is one word. If it is two, like when i enter the value "very good"
    then it takes two lines so as with a carriage return within the cell, thus, making it too high the row. I tried to padd spaces with rpad but it did not work. something like rpad(stock, 20,' ')
    I must say that the table is in the same page where there is a Form, so as the table grows in lenth it is actually squeezing the form located right on its left.
    3) rpad did not work with the most simple syntax, but less would with what i need because it turns out i am using DECODE in order to do a conversion between value displayed and
    value returned in my select list of values, something like : DECODE (TO_CHAR (stock),'1','Deficient','2','Average','3','Good','4','Very Good',null) AS stock,
    so, i have tried to put the rpad there in several places but either it gave parsing error or it left the column empty not picking any values.
    thank you very much
    Alvaro

    Alvaro
    1) That is standard behaviour of apex builder. You can change the display order with the arrows in the report attributes column report.
    2) You will have to play with the style attributes of the column to accomplice this. For instance style="white-space:pre;" in the Element Attributes of the column attributes. White-space:normal would thread several space (' ') as 1. So no matter how many you add with rpad they will be shown as 1.
    Or set a width either as attibute or in a style class for that column.
    Nicolette

  • My Apple Mini Display Port/HDMI adapter is not working after upgrading to Maverick?

    I am using my 13" Macbook Pro Purchased July 2013 on my 42" Samsung TV.  I route through a HDMI adapter (purchased from Apple) to do my presentations. As a note my setup has been working great for the last year. Immediately following the upgrade to Maverick my Samsung displays "No Signal" and changes state "Check Signal Cable" when the cable is disconnected.  Obviously there is some type of signal but it is not recognized.  I tried working with Apple support and they said that the adapter I was using must not be an Apple product.  I investigated fully thinking I may have possibly bought the wrong item, after much research I have exactly the same thing sold on the Apple store online and I even went to 3 Apple stores locally to see if there was possibly another adapter that I should have purchased, but it was exactly the same thing I purchased originally.  Help me fix the problem or please provide details on how to go back in operating systems to prior to Maverick (and not lose any of my data), this upgrade was a huge mistake way to many problems and not the quality that I am used to from Apple.

    Had a similar problem, but the answer is not a good one.
    You are going to have to wait until Apple fix this as some 3rd party monitors are not supported by this update.
    So you can:
    Go back to 10.6.7
    Wait for Lion
    or
    Use Onxy to clear up your computer and it may link to it again.
    I deleted some preference files, which when they rebuilt themselves after a restart did the trick.
    It worked for me, let me know how you get on?
    SBB

  • With display type native event is not working in my wd application

    Dear Friends,
    I have few interactive forms created webdynpro components.
    in SFP: formtype: ZCI and inserted the webdynpro script in the layout and interface type is DDIC.
    in Webdynpro: taken IF form UI element and with Enable check box checked(ON) and display type is Native.
    when i run my wd application interactive forms is opening but when i click on button on webdynpro or on enter of input field event is not getting trigger. cursor is showing wait icon and in busymode only.
    if i try with display type as activex it is working fine.
    But i don't want to use type as Activex.
    One more thing initially i have created 2 interative forms with those forms with displya type native is working fine, for new forms only the poblem is coming.
    please let me know how to get rid of this.
    Thanks,
    Mahesh.Gattu

    Hi ganesh,
    i hope you have already followed the process what i mentioned in my question.
    above that some times we are facing this busy mode issues, might be.. there coudl be some problem when we insert the webdynpro script.
    on sfp layout from utilities insert the webdynpro script.
    then sheck the script editor by selecting the data node in hierarchy tab.
    make sur the both event *presave and *formload are filled with some in built script and the language is Java script and Client side.
    then save activate the form and try.
    all the best.
    Thanks,
    mahesh.gattu

  • Report using charts not work on non-development machine

    Post Author: ftsoft
    CA Forum: .NET
    using visual studio report uses charts.  works fine on development machine when I move the web app to a test machine which does NOT contain visual studio, the chart report does not worknote: other reports which only display data records work fine. the space where the charts should be displayed contain the following two lines CrystalReportViewer - CrystalReportViewer1 Error: Fail to render the page.  any help would be appreciated

    Solution suggested worked for me. 
    On my test server Crystal was trying to use the c:\temp directory to write the temporary images, my report always ran ok on the test server.  On the live server CRW was running under with the ASPNET account and / or my own user account. 
    I ran FileMon and filtered on the aspnet_wp.exe process across both servers and ran the application up to the point of generating the issue.  The FileMon output from the test server showed no issues we as the output from FileMon off the live server showed an access denied message.
    I gave access right to the relevant accounts on the relevant folders on the live server and the report ran fine.

Maybe you are looking for