OS4.0 Update Wi-Fi Location issue

After updating to OS4.0 on my iPod Touch, the location for the WiFi keeps showing that I'm 50 miles from my actual location, which has never been a problem. Is this a known issue?

That kind of issue wouldn't bother me ... because my Wi-Fi doesn't work at ALL ... but ONLY at home from my AirPort base station ... but my Wi-Fi works for my MacPro and iPad, so something is screwed up between iOS 4 and the AirPort base station.
I was ABLE to connect to Wi-Fi in other public places though ... so go figure!

Similar Messages

  • How to update users' Trusted Locations settings on open?

    I am looking for a function that will trigger on opening of Access 2010 that will automatically update users' Trusted Locations to include the local network.  Only authenticated users have access to the drive, so there should be no security
    issues in making it a trusted location for anyone who opens the application. 
    It would be too time consuming to explain to 100+ how to add the network to their trusted locations, so I am looking for something to bypass this. 

    I put the function into the AutoExec macro, but when the database is not in a trusted location yet, I get a macro error number 2001.  After pressing Stop All Macros, then pressing Enable All Content, the function runs and properly adds the location. 
    Obviously the error occurs because the location is not trusted yet, so how do I get it to trust a macro beforehand?
    <v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe"
    stroked="f"><v:stroke joinstyle="miter"><v:formulas><v:f eqn="if lineDrawn pixelLineWidth 0"><v:f eqn="sum @0 1 0"><v:f eqn="sum 0 0 @1"><v:f eqn="prod @2 1 2"><v:f
    eqn="prod @3 21600 pixelWidth"><v:f eqn="prod @3 21600 pixelHeight"><v:f eqn="sum @0 0 1"><v:f eqn="prod @6 1 2"><v:f eqn="prod @7 21600 pixelWidth"><v:f eqn="sum @8 21600
    0"><v:f eqn="prod @7 21600 pixelHeight"><v:f eqn="sum @10 21600 0"></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
    <v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f"><o:lock aspectratio="t" v:ext="edit"></o:lock></v:path></v:stroke></v:shapetype><v:shape alt=""
    id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:372.75pt;height:229.5pt;" type="#_x0000_t75"><v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\ropelen\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png"></v:imagedata></v:shape>

  • Function module does not update the storage location in delivery

    Hello,
    I've been trying to use SD_DELIVERY_UPDATE_PICKING to update the storage location in SD return deliveries, without any success. Any clues? The FM works fine when it comes to updating the picking quantity, but the storage location issue still persists.
    Thanks in advance,
    Joao

    Hi Joao,
    I have the same problem. I tried to find the FM SD_OUTB_DELIVERY_CHANGE  but couldn't find it. Have you by any change specified the incorrect FM name here? If yes, can you please communicate the correct FM name?
    Regards,
    Divyaman

  • Adobe Reader X save location issue

    Hi All, i would like to seek expert helps on Adobe Reader save location issues. After we upgrade from Adobe Reader 9 to Adobe Reader X.
    There are changes on how save location works in Adobe Reader X
    If save PDF via Internet Explorer – the save location will according to last save location, HOWEVER
    If save PDF via Adobe Reader X – the save location will set according to location the file is being open
    Let me show you what i mean over the pictures
    I open a reader_X_help.pdf using Adobe Reader X and then save the file using Ctrl+Shift+S at: C:\Users\xxxx\Documents\My last location save
    refer my last save location.jpg
    Now i want to save another new file back to C:\Users\xxxx\Documents\My last location save, I open the file Adobe file2.pdf located at desktop and when i do Ctrl+Shift+S, the location point to my desktop and not C:\Users\xxxx\Documents\My last location save
    refer my last save location change to desktop.jpg
    I have tested this features in Adobe Reader 9 and it's different whereby it's will point according to my last location save.
    There is no issue with computer as i have 3 machine running different enviroment, Windows XP SP3, Windows 7 Enterprise, and all using same version of Adobe Reader X version 10.0.1.
    So my questions & concern:
    Is there any way to change the save location features same as Adobe Reader 9?
    If YES, how to do it? By Computer Changes or Adobe Reader X packages modification using Adobe Customization tools?
    If NO, Where can i find this source of documentation stated about this new changes so i can publish this information in HP website as new design changes to avoid complaint or negative feedback.
    Looking forward for expert reply as soon.
    Thank you very much and Have a great day.
    Best Regards
    Edmund Lau
    [email address removed by host]

    Solved it!
    1-go to "edit", select Preferences.
    2-select from the left pane: Security (enhanced)
    3-click on "add folder path" button just below the big white box
    4-pick a folder of your choice and click "ok". (your selected folder path will appear in that white box above the "add folder path" button in step 3)
    5-if you want to add additional folders, just repeat steps 3 & 4
    6-once you are done, click "ok" on the preferences screen and click "ok" again to accept the changes.
    Yes, it seems illogical, but it worked.
    I tested by closing the Reader (X), then surfed the web and did what Neher5 was explaining he/she wanted to do just after opening a pdf from a website and lo-and-behold,  it worked!. No more "save to temp folder" issues.
    Hope this helps.

  • I am trying to update to 11.1 on a Windows XP system and I keep getting an error message saying the update can't locate the itunes.msi file...where is that located?

    I am trying to update my Itunes software on a Windows XP system and keep getting an error message saying the update can't locate "itunes.msi"  where is that file located?
    thanks, Judy

    The servers are getting slammed by millions of people wanting to upgrade..   just give it some time, and soon enough you'll have your upgrade.

  • Adobe Acrobat 9 Updater Preference File Location

    What is the default Adobe Acrobat 9 Updater Preference File Location setting when you click on Help > Check for Updates?

    Windows XP
    C:\Documents and Settings\<current user>\Local Settings\Application Data\Adobe\Updater6\
    Windows Vista
    \\Users\<current user>[AppData]\Local\Adobe\Updater6\
    Windows 7
    C:\Users\<current user>[AppData]\Local\Adobe\Updater6\
    Mac
    "/Users/<current user>/Library/Application Support/Adobe/Updater6/"
    AdobeUpdaterPrefs.dat

  • 10g-cvs update/import new files issue

    Hi all,
    when I update a folder in jdev 10g, it doesn't open the new checked in files in the environment
    in the old 9i I used to click on 'update folder' and the tool prompted me 'open the new files in the active project?'
    now if I update a folder, it just update the already opened files,without importing the new ones
    any workaround?
    thanks in advance

    Hi,
    Due to a customer support request, the behavior of prompting to open newly checked out files in the active project was removed when performing CVS update on a folder. If the project file is version controlled and gets updated at the same time, the changes are very difficult to consolidate. For the best CVS experience, we recommend using projects which scan source paths to determine their contents (see Project Properties / Input Paths), and manually refreshing the navigator when new files may have resulted from an update operation.
    This issue is being tracked, and we'll keep it in mind.
    Thanks.
    Paul. JDev Team

  • HT4943 I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue.  Subscription is active but there never is a new mag...

    I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue.  Subscription is active but there never is a new mag...
    They got the money but there is no monthly subscription and it says the subscription will expire in Feb!

    Hello ISXDesign,
    Thanks for the question, and welcome to Apple Support Communities. I understand that you are having issues redeeming a subscription that you have paid for. The best option will be to report an issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks,
    Matt M.

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Callmanager Conferencing with remote locations Issue

    I am new to using callmanager, and I need a little help.
    I have created a meet me number on my callmanager. Once a session is begun, all local network users are able to join the conference call with no problems..
    If a remote location hosts a meet me call, all my local network users are able to join THAT session with no problems as well.
    But if I host a meet me session on MY local network, remote locations CANNOT reach my session. The line remains silent when they dial in.
    I've been told to check the codecs which seem fine and we are checking for a firewall issue, but all normal calls local and remote work just fine. It's only the conference bridging that causes issues.
    Please help.
    Thanks

    Hello,
    Thank you very much for replying.
    The configurations, I've been told, are correct. G711 for intrasite and G729 for intersite. And region and device pools correct as well.
    I presented the HW conf bridge solution to a coworker who said it makes sense, but at this time, I don't have access to a hardware conference bridge. Is this the only solution? 
    From: prbt
    To: Nichole Ketchum
    Sent: Wednesday, August 3, 2011 1:54 PM
    Subject: - Re: Callmanager Conferencing with remote locations Issue
    Cisco Support Community
    Re: Callmanager Conferencing with remote locations Issue created by Priya B.T in Unified Communications Applications - View the full discussion
    hi,
    please check the following on the call manager,
    -  Check the region configuration on each device pool.
    -  Then check the region configuration between the two regions.
    -  One of the best practices followed by Cisco is, the intrasite region settings should be g711.
    -  And the region settings between inter site should be g729.
    -  G729 is not supported by software conference bridge, it is only supported by hardware conference bridge.
    -  So add the hardware conference bridge to the MRGL of the phone.
    -  And the hardware conference bridge has to be first in the list, that is before the software conference bridge.
    please let me know if this helps or we can do further trouble shooting on this issue.
    Reply to this message by going to Cisco Support Community
    Start a new discussion in Unified Communications Applications at Cisco Support Community

  • HT204244 Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?

    Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?

    Go to Geekbench
    http://browser.primatelabs.com/mac-benchmarks
    and check out the relative values for the system you're currently using versus the one you're going to buy. My guess is a fullly spec'd MBP Retina will do the job, but you're undoubtedly better qualified than anyone on here to tell what kind of a machine you need.

  • After the recent update I am having issues with Flash based games freezing and not responding.

    After the recent update I am having issues with flash based programs not running or loading correctly.  The programs will not load or take an extremely long time to load compared to jsut a few days ago.  This happens across the board on anything flash based.  Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best.  I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers.  None of this has helped at all.  I am using Chrome and it is up to date and I checked my Flash player and it is up to date.  I am running windows 7 64bit.

    Here's what you're up against guys,
    Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
    And to the first post:  Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

  • Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
    Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • How to change the update servers target location?

    Hi i just bought a used MacBook from a friend i have been having a problem when trying to use the software update. when i click on software update it says it can not connect to the update server and that i should use network diagnostics. when i click on it it says network seems to be fine but on the left side it shows a red light where server is and says failed i click on run diagnostics and it says "network diagnostics was able to connect to the internet but not to the server "(not showing the server for privacy reasons)" This could be caused by problems with the server, or an internet problem between this computer and the server."
    The server name which i did not list was my friends old job server. i just want to know how to change the update servers target location so it will stop trying to connect to his jobs server so it will allow me to update my software from my home wifi thanks

    Your friend has configured this computer in some way to prevent a user from accessing Apple's update servers. This was probably done for security purposes. You might check if the firewall has been activated - Open the Security preferences, click on the Firewall tab. If the firewall is turned on, then turn it off. This should fix the problem.
    However, if your friend has made other modifications, then you will need to ask him/her what you will need to do to remove them.

  • My iphone 5 has not prompted me for a software update since ios7.04. When i search for an update it tell me "unable to check for update" anyone have this issue?

    my iphone 5 has not prompted me for a software update since ios7.04. When i search for an update it tell me "unable to check for update" anyone have this issue?

    my ipod is not the newest update possible as i said i tried to update but it wouldnt let me as it wont let me on wifi sources such as safari facebook and other apps which use wifi.all the apps are fully updated

Maybe you are looking for