OS7 wifi issue with OSX 10.7 internet sharing?

After upgrading to OS7 I cannot connect to my internet sharing on my Mac anymore. Tried to reset everything and trying again, but it still won't connect because it won't accept the password I set for internet sharing on my Mac. Funny thing is if I remove the password and set it to NONE and connect it will CONNECT!

Similar Messages

WiFi Issue with S850

I am facing WiFi issues with my S850 phone. It does connect to wifi network but browsing does not work. It is same for all the wifi networks. I am not able to browse internet or any other work which req net connectivity,

can you try do a factory restore then just use the phone without changing anything in settings. I am not sure if this is caused by settings or a hardware issue.
If after doing a factory reset and problem persist then bring it to the service center.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

WiFi issues with Curve 8530

Hi,
I am having major WiFi issues with my Curve 8530. Everytime I connect to my wireless router, it takes a long time to connect to BIS, and then if I try to use basically any data at all, my router drops my Curve 8530. Sometimes it stays connected, but I cannot use App World at all, and email, and web browsing is all over the place in terms of speed, sometimes it is fast, while sometimes it is slow, and most of the time it stalls while loading a page. How do I configure my router for use with BIS and have it not drop my Curve 8530 everytime I use data over WiFi? BIS works perfectly over my cellular carriers network, so BIS is activated on my device. I have tried giving my BB a static IP, but that did not solve anything. My router is a Netgear WNR2000. Also, I have the latest device software installed on my BB, and all of my apps are up-to-date.

Hi,
Have you had any luck and resolving your problem?
We have a similar problem but it's with iOS devices where only one can connect at a time. We have about 10 that need to connect. All other laptops and tablets connect fine.
Power cycling the AX411 fixes it temporarly.
Darren

Is Apple aware of the Wifi issue with the IOS8 upgrade?

Is Apple aware of the WiFi issue with the IOS8 update? If so, what are the doing about it?

Ipad, wifi stops working and I have to restart my iPad and log in again. It only stays logged into my wifi for a short while then it drops it again. I followed instructions from other threads to reset my IPad and my router...still having issues. The same thing happened the last time I updated my IOS.

Permissions issue with OSX 10.5.8

This is likely a newbie question. I am new to OS X, but I am familiar with Linux/Unix Terminal usage.
I have a permissions issue with OSX 10.5.8.
I cannot use basic commands on the Terminal, such as mkdir, on my own home directory. I get an error message saying the operation is not permitted.
I have traced the probable culprit down to default ACL permissions settings.
So after hours of research on Google, I found out that ACL are turned on by default in OSX 10.5.8.
But I don't know how to safely use it yet, so I need help.
I'm not quite familiar with ACL, so I need to know how to add myself safely and securely to modify my home directory.
The command is with chmod. Can this also be done via the GUI?
What is the option for chmod to modify my home directory?
Is it:
*$ cd ~*
*$ chmod +a "user:john allow write" .*
*$ chmod +a "user:john allow delete" .*
Alternatively, if I use the "chmod -N ." command on the home directory, will that safely remove all ACL? Or is that recipe for a major security hole in my machine?
Thanks!

There are many people on this board that know way more than I do. Sometimes there is the tendency to copy/paste some kind of boilerplate response though, especially if there isn't quite enough information about a particular problem, so just keep trying.
You should be able to add anything you want to your user directory without the use of any ACL entries. The purpose for the *deny delete* entries on the system created folders would probably be to reduce customer service calls about "accidentally" deleting some of the folders that the system expects to be there - it does not affect creating items.
To verify that there aren't other attributes getting in the way, open the /Applications/Utilities/Terminal application, copy/paste the following command(s) into the window (there is a trailing space), drag the problem folder(s) from a Finder window to the Terminal window (this will paste the path), press return and post back with the results:
/usr/bin/who am i; /bin/ls -leO@d
These commands will display the ownership and permissions, including any ACL entries and extended attributes.
On my Leopard user folder the permissions are drwxr-xr-x+ with an ACL entry *group:everyone deny delete*. These permissions allow read/write for me, read for everyone else, and an administrator authentication will be needed to delete the folder. These are similar to what you posted earlier, so maybe there is something else going on in there.

I cannot get decent reception on my 4s from Sprint. I understand there is a known WiFi issue with the 4s as well as antenna issues. Is this true and is it resoved in the 5 series?

I cannot get decent reception on my 4s from Sprint. I understand there is a known WiFi issue with the 4s as well as antenna issues. Is this true and is it resoved in the 5 series?

I am aware that Sprint has network issues. I have learned that Apple does have reception issues with the 4s. The 5 series has more antenna area and a different protocol. I have owned at least 6 iPhones personally and over 30 as a company. The 4s is junk. Apple's attitude toward customer service is much more of a problem than Sprint's network. Apple sent me your non-answer to my questions instead of anything real. I asked about the iPhone, not about Sprint.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

IPad 2 wifi issues with iMac internet sharing

I have the iPad 2 [ (Wifi + 3G) ( iOS 5.1.1 (9B206) ] which connected to my 21" iMac [Mac OS X Lion 10.7.4 (11E53)] through Internet sharing seemlessly some time back.
However of late, with latest software updates on the iMac & iPad, the connection seems to work only intermittently.
The connection breaks every half or one hour, despite both the devices being in the same room.
I have tried almost all suggestions on forums like resetting your network settings on iPad, changing channels on the iMac for Internet sharing, with or without password security, resetting the firewalls on & off on the iMac, but nothing seems to work & the only way is to reset all your settings all over again.

I used Internet Sharing like this couple of times!
The situation happens is that when you share your internet over Wifi, and you password protect it, when you connect the iPad or any iDevice to that new hotspot, it happens that after selecting that hotspot, we need to turn on "Auto Join". So when the iPad gets disconnected, it gets disconnected completely and you need to connect back once again. So when you turn on "Auto Join" it will get connected automatically once again it gets disconnected maybe due to power saving or suddenly it leaves the hotspot.

WiFi issues with iPhone 4S & ios 6 update

Okay here is my issue...
I've been reading alot of issues that people have with connecting to WiFi with their new iPhone 5, iPhone 4S or other devices but I have no trouble connecting to WiFi at all. My problem is that WiFi wont 'work'. The WiFi I'm hooked up to at home doesn't let me do basically anything that requires internet.
I can get on the Facebook app fine and my newsfeed loads but I can't see Facebook notifications, upload photos or videos, read inboxes, look at photos, its very slow etc.
I can't get into the App Store or iTunes at all. It says it 'Cannot Connect to iTunes Store' when I try.
I can't upload photos onto Instagram
Currently I'm into the Simpsons Tapped Out game and I can't go onto it at all.
And there are a few other minor issues I am having.
All these things I can do with my Telstra 3G network however and it ***** because I want to use and do all these things but I have to use my 3G and I've just recently gone over my data monthly usage and been charged extra which I'm not happy about.
So is anyone else having these issues or is it just me and I'm stuffed? I'd REALLY love some help.
I've been lost with what to do because as some are having WiFi issues as well, mine isnt the same and it's hard to find answers or just other discussions.
Please Help!
Thankyou.

I am having the same issue since updating to iOS 6. It has been noticeable on my iPhone 4S and a little less noticeable on my iPad 3 but I think it is happening on the iPad too. Very annoying problem. One way to get it to work better is to re-boot your phone. It will work for awhile then and then eventually not be working anymore and you will need to re-boot again.
Just to be clear with everyone - the iPhone looks like it is connected to the wireless, it gets an IP address but can't transmit any data. Device: iPhone 4S, OS: iOS6

Airport 802.11g and WIFI issues with Apple bluetooth keyboard

Hey guys, this thing start to drive me crazy, I bought a Apple BT keyboard but just recently I started to having problems with my wifi connection and apparently I think this is due to the BT keys.
I started to notice this issue when I moving with the laptop in another room where usually I had maximum Airport signal, now it's happening that the signal start to lose power and when is just to the minimum, internet or other net staff don't work anymore and after 5 minutes of this apparently "freeze" wifi status, the airport loose definitely the signal.
After that I need to turn off the Airport card, most of the time work but sometimes i need to turn off two times to get it works.
After I read different blogs and forum, I tried to change channel, use the interference robustness, anything, and at the ending I reinstalled Leo, still have this problem, so I started to turn off the bluetooth connection and it look's like when the signal start to lose power the network keep working, and than reprise the maximum power.
So I can really fix this issue or is another "well done" by Apple? It look's like the Apple industry getting so close to the trash world! I'm sorry for these last words but my disappointed in Apple getting bigger.
Thank you for anyone helps.
P.S. a friend of mine with a Macbook Pro, Snow Leopard and my same Airport Base station have the same issue.

GuyI just fixed for now the problem turning off the bluetooth keyboard when I have wifi issues, it's the only solutions!

Wifi issues with IOS6 on IPAD3

Hi,
I own a 3rd generation iPad and ever since I upgraded to ios6. My wifi signals are being detected by my iPad but internet not working at all on wifi as in just says loading but there isn't any data transfer.
My 4s also is IOS6 and is on the same wifi network and it works just fine.
I hope apple community has a solution. Thank you.

I got it fixed finally. I failed to try the basic step, assuming there is a serious issue with the IOS6. Sorry about that.
Under wifi, selected, went in to the wifi network that i am connected to and select "forget network" and then under general, "Reset Network Settings" only and re-added my wifi and it worked just fine and still is.
Anyone facing the same issue and haven't yet tried the above mentioned option,i strongly suggest you do so.
Thank you so much for trying to help me out.
Cheers!

Wifi problem with OSX Yosemite

I owned my first 13 inch MBP Late 2011 that came with OSX Lion. I upgraded my MBP with every new OSX releases and were very pleased with them.
With OSX Yosemite, I was very happy with the fresh new feel and looks of it. The problem with the new OSX it that my wifi connection suffers from it. The speed are getting slower and slower and the connection often drop off unexpectedly. The worst thing of all is that I can't connect to my windows phone wifi sharing. This doesn't happen with the previous OSXes. Please rectify this problem as soon as possible. Thank you.

Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

VPP Distribution issues with OSX Server Profile Manager

Hi, I have a new issue with my OSX 10.9.5 Server. I use VPP to distribute apps to users devices, when I would add a new user I would send them an invitation message through /profilemanager . All was working well until recenetly , the message still arrives in the users mailbox however when you click the "sign in" link on the "receive apps and books from xxxxx" email instead of opening through the Mac App store app it now opens Safari and connects to the profile manager server , any ideas ? it never has done this before and although I thought it was a new feature or method I can not seem to resolve the issue.

Hi if when you are redirected back to your Mac Server you enter the user name and password of the user you are trying to receive VPP apps for i.e the Open Directory credentials it will then open the App Store providing the credentials are correctly entered so it looks like an additional layer of security. The process is click on the link in the VPP invite email, this takes you to your Mac Server profile manager, log on with your OD account, App store then opens on your Mac like it used to.

Wifi issues with iphone not responding

Phone: iPhone 4s.
This issue started approximately two weeks ago. My phone initially started with the Wifi connection greyed out, I followed the appropriate steps to resolve this issue, and was successful. Now I can turn the wifi connection on without problems, but my iPhone will freeze (delay), then return me to my homescreen. Occasionally I do automatically connect to my known wifi, but then will disconnect and return to 3G. If I make an attempt to go to settings to manually reconnect, the phone again freezes. The phone seems to freeze after I click settings, then when pressing Wi-Fi, the bar turns dark bold, but freezes and doesn't open. I then have to click my home button, return to the main menu. Also if I open an app during the seldom opportunity my phone is connected to wifi, the phone will disconnect, return to 3G and freeze. I have rebooted my routers, forgot networks, reset network settings. I have thought about resetting the entire phone, but my phone will not stay connected to wifi long enough for me to back up my data to iCloud. I am thinking of stopping into my local verizon store, but I think they will redirect me to an apple store; which is 35 miles away. Of course the problem with me not connecting to Wi-Fi is my increased use of data. Now I am over 75% for my monthly usage with 2 weeks remaining, and do not see justification in possibly having to pay the overage fee. Many times when my phone freezes due to these wifi issues, or will not respond, I have to do the manual power/home reset. In conclusion, I need to figure out how to maintain my connection to Wi-fi, and stop my phone from not responding when I open my wifi settings. Thanks in advance!

My Iphone 4S is doing the same thing.. All of a sudden the WIFI button is gray and not working. I chatted online with a Rep. He had me call *228 and hit option 1, then call again and hit option 2. All of a sudden the WIFI button was black. But it could not find any network. I shut it off and restarted it and now button gray again. I called that number again and still gray. I read somewhere else that a lot of people have a problem with the WIFI button. They say it basically just stops working. This was a replacement phone because the volume stopped working on my original phone. I assume they gave me a refurbished one because it didn't seem new. I'm due an upgrade in 3 months. I'm disabled and just hate driving to the store again. I wish there was an easier way.

WIFI issues with 2013 MBA

Hi
I would be most grateful for help with the following - I recently purchased a 2013 MBA (latest model) but have been having issues with the wifi speed. My broadband normally runs at 6-7Mbps (which I check regulary) but my MBA can only be described as slow when browsing simple web pages (the other pc's in the house don't have the same issues). I have checked the transfer rate on my WIFI in Network Utility and it sits at 144 Mbit/s so I am not entirly sure where the problems lies and why it is only affecting my MBA. I have tried switching channels but it has not helped. I am aware that recent MBA have issues with WIFI but not sure if these problems are related.
Thanks
Tim

Hello tim0409
Check out the articles below to ensure that the router is setup with the recommended settings and other troubleshooting steps to sort you out.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

OS7 wifi issue with OSX 10.7 internet sharing?

Similar Messages

Maybe you are looking for