OSA on the Web not showing descriptions

Hi All,.
We have web enabled OSA and when i click on New Report option ,the frontend is not showing the descriptions for
measures or dimesion but displaying only the code .
Any help is greatly appretiated.
Senthil

This user tip might help you understand how accounts work with Address Book.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Similar Messages

  • 2 of my personas dissappeared 'My Gallery' since they've rearranged the viewingorder (from highest ranking to creationdate), and 2 of them are showing double. My designer name is 'Nielske' and the personas not showing in my gallery are: "Madonna - Intervi

    2 of my personas dissappeared from 'My Gallery' since they've rearranged the viewingorder (from highest ranking to creationdate), and 2 of them are showing double. My designer name is 'Nielske' and the personas not showing in my gallery are: "Madonna - Interview Magazine Collection" and "Madonna - Interview Magazine 4". However they are showing in the complete Persona Database if searched under Madonna (page 5).
    == This happened ==
    Every time Firefox opened
    == the personas in My Gallery (Personas by designer Nielske) got sorted bij date of creation instead of highest ranking

    I have the same problem.
    Here is the link to my gallery - http://www.getpersonas.com/en-US/gallery/Designer/manishp100
    as you will see these two, at least, do not appear - I cant remember if there are more that dont.. im sure there might be -
    http://www.getpersonas.com/en-US/persona/245197
    http://www.getpersonas.com/en-US/persona/245212

  • Why did the trace NOT show the other switches in between?

    I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

    It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
    HTH,
    John
    *** Please rate all useful posts ***

  • Prompt in webi not showing all the values

    I have created a universe based on a BI query.in the BI query there is a variable for the profit center which has been used in the characteristic restrictions.When i create a webi report based on this universe,the prompt for the profit center is showing only 1 value.It is not showing the rest of the values.Pls help.

    Hi,
    1. Try to check at BI query level whether values are there for profit center column or not.
    2. Try to do what susney said. If it doesn't work follow 3.
    3.  In universe level go to the profit center object  on which you created prompt-> click on object properties -> properties -> edit list of lovs -> then a query panel appers to you -> run and check whether all the values appering to that object ot not.
    4. If all the values appering then check whether any filters are applied to profit center object in universe level/report level.
    Cheers,
    Suresh Aluri.

  • VCs  in Web: not showing (same file name)

    Virual copies with the same file name don't show up when creating web pages. How can you show variations of the same image (ie, color and B&W) with this nameing issue?
    Thanks!
    Reid

    Are you sure you are selecting them properly. To include VCs in a Web Site you need to select all the ones you want individually. Selecting the Master one in a closed stack (which may or amy not be the original) does not select all of the stack. TO select all or some of the stack it must be open by pressing 's' or by clicking at the side of the stack to open the stack.
    If you then make your selections they will appear in the Web Template.
    At the top of the Metadata section on the right in Library, under the Filename is where you can provide individual naming for the VCs.
    Hope this helps,
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Will the web address show up on the bottom of the page when I print my forms?

    I am still in preview mode, and am not ready to go live yet with my forms, but will be soon.  But when I am testing the forms and I print them, the web address prints on the bottom of the page.  Will this continue to happen when my forms are live and found on my website, or will a web address always show up on the bottom of the form when it is being printed?  We keep a lot of our forms in paper copy for records and it looks sloppy with that on the printed version.

    The browser puts that there, not us. Check your print setup options.
    You can also save out the form as PDF and print that.
    Randy

  • Validation message not showing description

    Dear Experts,
    I made the validation for Mobile number filed in Account creation (BP). If the user should enter only Numeric values in the Mobile number field. If they enter Alpha numeric it should give an error message in WEBUI.
    For that i enhanced the component and made the required code, but in the webui screen its now its not showing the description of the error messaage, its showing message class and messge number only. Hope i made some mistake, any one please guide me.
    The code as below,
    if <nval> CA sy-abcde.
        DATA: lr_msg_srv TYPE REF TO cl_bsp_wd_message_service.
        lr_msg_srv = cl_bsp_wd_message_service=>get_instance( ).
        lr_msg_srv->add_message( iv_msg_type = 'E'
                                  iv_msg_id = 'ZCRM_SERVICE'
                                  iv_msg_number = '011' ).
    endif.
    Reg,
    anandhan.

    Hi Anandhan,
    You can do this by creating a custom implementation for the BADI 'CRM_ORDER_SAVE' method  check_before_save and once you got the raise the message you can use RAISE DO_NOT_SAVE..
    if <nval> CA sy-abcde.
        DATA: lr_msg_srv TYPE REF TO cl_bsp_wd_message_service.
        lr_msg_srv = cl_bsp_wd_message_service=>get_instance( ).
        lr_msg_srv->add_message( iv_msg_type = 'E'
                                  iv_msg_id = 'ZCRM_SERVICE'
                                  iv_msg_number = '011' ).
    RAISE do_not_save
    endif.
    Best Regards,
    Dharmakasi.

  • Why is the Counter Not Showing on my Blog Front Page?

    Anyone know why me blog is not showing on my blog's main page:
    http://web.me.com/quathletics/QuinnipiacMidnight_Madness_2009/2009_Quinnipiac_Midnight_Madness/2009_Quinnipiac_MidnightMadness.html
    I can see it in iWeb, but after publishing site, it does not show?
    Any suggestions.
    Thx Much

    OT,
    Thx Much.
    Did all you suggested with the footer and still no counter visible:
    http://web.me.com/quathletics/QuinnipiacMidnight_Madness_2009/2009_Quinnipiac_Midnight_Madness/2009_Quinnipiac_MidnightMadness.html
    Had similar issues with another iWeb blog...something is not right with this and any help would be appreciated.

  • I have songs that have been purchased and they show up in my I tunes but the are not showing up bold like all other songs in my library, they will not let me download from the cloud and will not load onto my ipod.

    I have a handfull of songs in my library that are not showing up bold like the other songs. When I click the icon to download from the cloud nothing happens and they will not load onto my ipod. When I look for them in the purchased area they show up as purchased and downloaded.

    Welcome to the Apple Community.
    So far as I am aware, books haven't been available for 6 years, so I'm wondering if you mean audiobooks.
    Audiobooks are not currently part of the content that can be re-downloaded.

  • Calculate result as average in the report not showing average for all

    Hello,
    I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
    1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
    2. Aggreagation tab: exception aggregation: Total and reference char: []
    Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
    Please help me in resolving the issue- why portal not showing value for all.
    Thanks,
    Vijaya

    SAP note solved the purpose.
    Thanks & Regards,
    Vijaya

  • Name of the Month not showing correctly in calendar

    I m facing a strange problem with the calendar, on the home screen calendar icon date & day is showing correct but when i view the full month calendar then its not showing the right month --- it is showing all the days of the March 1st to 31st correct but on the TOP in place of month it is showing February 2008 instead of March 2008. How can Feb has 31 days. I hv checked all the other settings.
    PLS HELP ME.

    Here are a couple of articles from the apple support website that might help out.
    http://docs.info.apple.com/article.html?artnum=305740
    http://docs.info.apple.com/article.html?artnum=305744

  • Why are photos that are placed on the page not showing up in links panel?

    seems really random, I have 2 files that have several photos on them, but one photo on each is not showing in the links panel

    not sure, just checking on errors from other co-workers, but I tried copying and
    pasting from Quark and got the same result, so that is probably what they did.
    thanks

  • Link to query on the web not working. Please help.

    hi gurus,
    We have a few queries which can be viewed thru our internal Web page. These are links to the actual queries on the BW BEx PRD server. These links were good sometime back. Now when we click them, we can see the URL blinking, trying to connect. But it doesn't.
    Infact, when I try to 'display the query on Web' from the Query Designer, the same thing is happening. But the same queries display on web in QA. We have 3.0B/3.5
    I'm not sure what is changed in PRD. Any help is greatly appreciated.
    TIA
    Sharada

    Hello Sharada,
    Please make sure that all the web service are up and running. Goto Tcode SICF and you have to activate the HTTP web service
    [Activating and Deactivating ICF Services|http://help.sap.com/saphelp_nw70/helpdata/EN/f3/f8193c99f5a765e10000000a11402f/content.htm]
    [Activating an SICF Service|http://help.sap.com/saphelp_nw04/helpdata/en/9b/2b173f5ff48443e10000000a114084/content.htm]
    Click the link for more details about [Internet Communication Framework (ICF)|http://help.sap.com/saphelp_nw04/helpdata/en/69/ac75addb6811d6b2ca00508b5d5c51/content.htm]
    Thanks
    Chandran

  • Why is the GUI not showing when i run it

    Why is it not showing the container
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    import javax.swing.*;
    public class Progress extends JFrame {
         private String path;
         private JPanel topLeftPanel;
         private JPanel labelPanel;
         private JTextField pathField;
         public Progress()
              this.setTitle("PROGRESS Message Viewer");
              this.setSize(800, 600);
              Container contentPane = this.getContentPane( );
              // Technique for centering a frame on the screen.
              Dimension frameSize = this.getSize();
              Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
              this.setLocation((screenSize.width - frameSize.width)/2,
                               (screenSize.height - frameSize.height)/2);
              topLeftPanel = new JPanel();
              topLeftPanel.setLayout(new GridLayout(1, 2));
              labelPanel = new JPanel();
              labelPanel.setLayout(new GridLayout(4, 1));
              JLabel l = new JLabel("Please enter the path to log file:  ");
              l.setForeground(Color.black);
              labelPanel.add(l);
              topLeftPanel.add(labelPanel);
              pathField = new JTextField(80);
              ActionListener aListener = new ActionListener() {
                   public void actionPerformed(ActionEvent e) {
                        // Retrieve the path.
                        char[] pathFieldText = pathField.getText().toCharArray();
                        path = new String(pathFieldText).trim();
              pathField.addActionListener(aListener);
              contentPane.add(topLeftPanel);
              contentPane.add(pathField);
         public static void main(String []args){
              Progress p = new Progress();
    }

    Swing related questions should be posted in the Swing forum.
    Read the BoderLayout API documentation. If you don't specify a constraint then by default the component is added to the "CENTER". However only a single component can be displayed in any given area of the BorderLayout. So the second add(...) method replaces the first component added.
    Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]How to Use Layout Managers for more information.

  • No HDMI audio, the icon not show it (Pavillion dv6-VX069AAR)

    Hi, I have no audio hdmi on my lcd tv, only video. icon besides hdmi is not show it, could you help me?, thanks.

    Hi,
    What is the model of your machine EXACTLY ? Google can not find it. Update video driver may help.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for