OSB 11g Configuration

Hi,
I am trying to install Oracle Service Bus 11g, the installation went successfully, but when trying to configure the WebLogic (10.3.2) Domain and selecting (Oracle Service Bus Extension - all domain Technologies 11.1.1.3[Oracle_OSB]) from the domain creation wizard sources, it fails with the following error message:
CFGFWK-60814: The template you selected can't be applied because the following dependencies have not been satisfied:
Missing prerequisite:
DEP for Oracle Service Bus Extension - Topology independent base extension:11.1.1.3
[c:\oracle\Weblogic\Oracle_OSB\common\template\applications\wlsb_base.jar] (WebLogic Advanced Web Services for JAX-RPC Extension[10.3.3.0-_))
and i can't find any domain source named "WebLogic advanced Web Services for JAX-RPC Extension
any idea?
Thanks

Hi,
but when trying to configure the WebLogic (10.3.2) As per OSB 11g installation guide, you can extend any of the following existing domains:
Oracle WebLogic Server 10.3.3 domain
Oracle SOA Suite 11.1.1.3.0 domain
Oracle Service Bus 11.1.1.3.0 domain
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15017/under_install.htm#CJABBJDC
Are you using weblogic 10.3.3?
Regards,
Anuj

Similar Messages

Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

Hi All,
Sorry for the apparent silly question but I am studying and learning the product.
I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
4.4.3 Oracle Service Bus Configuration Page.
I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
Thanks.
Regards
Salvatore Ilardo

The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
Regards,
Anuj

Configure OSB 11g to use the same domain as SOA Suite 11g

Hi,
A quick question on OSB Installation and extend the weblogic domain created for soa for OSB also. Please guide me what i am following is the correct path.
I followed the soa 11g and osb 11g installation doc from Eric Elzinga blog also checked oracle doc. Am quite confused about the directory structure to cofigure SOA Suite 11g and OSB 11g.
After SOA suite install , I Configure Oracle SOA Suite by following the below path
Run: middleware/wlserver_10.3/common/bin/config.exe (followed the blog ON OSB 11g Installation from Eric Elzinga).
I have seen another path to configure soa suite from oracle doc
SOA_ORACLE_HOME\common\bin\config.cmd
eg: E:\oraclehome\11g\middleware\Oracle_SOA1\common\bin\config.cmd
both directory str are correct?
After OSB installation , to configure OSB , I choose to reuse the SOA Suite domain to extend it with the Oracle Service Bus components. so in that case , is it the right directory structure I am following is
<Middleware_Home>\oracle_common\common\bin\config.bat.
eg: E:\oraclehome\11g\middleware\oracle_common\common\bin\config.bat
Thanks in advance
jk

Eventually you configure the weblogic domain always (either it is for SOA or OSB or BPM or all), so you should use middleware/wlserver_10.3/common/bin/config.exe
Regards,
Anuj

OSB 11g Domain Configuration.

Hello,
I am having trouble understanding the results of the OSB 11g domain configuration. In creating the domain i have selected the following options:
Oracle Service Bus OWSM Extension
Oracle Service Bus Extension - All domain topologies
Weblogic Advanced Web Services for JAX-RPC Extension
Oracle WSM Policy Manager
Oracle JRF
I have selected the 'all domain topologies' as i wish to end up with an 'AdminServer' (using port 7001) and 'osb_server1' (using port 8011). Everything installs without a problem, its that i just don't understand the outcome. The OSB transport providers and adpaters (FTP, File, Db, AQ, etc) are targeted at both the admin server and the osb managed server. I also notice that the osb console is targeted only at the admin server. The confusion comes from the fact that when i use the OSB console application to create a project which i then test (successfully) it appears to all be deployed and running on the admin server? This is based on the fact that the URL used to invoke the OSB proxy service has to specify the port of the admin server. I would have thought that the url to access the proxy service would have been directed at the managed server?
Can someone confirm / explain to me what is going on or why it works this way, please?

The OSB transport providers and adpaters (FTP, File, Db, AQ, etc) are targeted at both the admin server and the osb managed server.Your observation is correct.
I also notice that the osb console is targeted only at the admin server.Yes. This is by design.
The confusion comes from the fact that when i use the OSB console application to create a project which i then test (successfully) it appears to all be deployed and running on the admin server?No. This cannot happen. When you activate the configuration, OSB deploys configuration to the managed server.
This is based on the fact that the URL used to invoke the OSB proxy service has to specify the port of the admin server. I would have thought that the url to access the proxy service would have been directed at the managed server?Are you test console?
Manoj
Edited by: Manoj Neelapu on May 24, 2010 9:28 AM

OSB 11g How to import existing project to Configuration project ?

Environment: latest OSB 11g + WLS + OOPE , Win 7
When an exiisting OSB Eclipse project is imported to Configuration project comes a message
"Path for project must have only one segment"
What is the solutiion to this problem ?

One solution
Exit Eclipse
Edit manually file <Configuration project> \.settings\com.bea.alsb.core.prefs\container.referenced.projects
Start Eclipse

Error while running export.py in OSB 11g

Hi all,
I am trying to write wlst in osb 11g. I am getting the following error
export:
[echo] exportscript: export.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
*[java] Problem invoking WLST - Traceback (innermost last):*
*[java] File "C:\Documents and Settings\Desktop\WLST\test\export.py", line 7, in ?*
*[java] ImportError: cannot import name EnvValueQuery*
[java] Java Result: 1
BUILD SUCCESSFUL
Total time: 6 seconds
Below is my build.xml should I make any more changes to run it in 11g I have changed the com.bea.common.configfwk_1.3.0.0.jar file name and directory names.
Should I set any class path before running this build.xml ?
<project default="export">
     
     <property environment="env" />
     
     
     <property name="bea.home" value="C:\Oracle\Middleware" />
     
     <property name="workspace.dir" value="C:\Documents and Settings\workspace\Test OSB Project" />
     <property name="weblogic.home" value="${bea.home}\wlserver_10.3" />
     <property name="domain.export.script" value="export.py" />
     <property name="domain.import.script" value="import.py" />
     <property name="export.config.file" value="export.properties" />
     <property name="import.config.file" value="import.properties" />
     <property name="build" value="build" />
     <property name="dist" value="dist" />
     <path id="wlst.class.path">
          <fileset dir="${bea.home}\Oracle_OSB1\lib">
               <include name="sb-kernel-api.jar" />
          </fileset>
          <fileset dir="${bea.home}\modules">
               <include name="com.bea.common.configfwk_1.3.0.0.jar" />
          </fileset>
          <fileset dir="${weblogic.home}\server\lib">
               <include name="weblogic.jar" />
               <include name="webserviceclient.jar" />
          </fileset>
     </path>
     <taskdef name="wlst" classname="weblogic.ant.taskdefs.management.WLSTTask" classpathref="wlst.class.path" />
     <target name="export">
          <echo message="exportscript: ${domain.export.script}" />
          <java classname="weblogic.WLST" fork="true" classpathref="wlst.class.path">
               <arg line="${domain.export.script} ${export.config.file}" />
          </java>
     </target>
     <target name="clean">
          <delete dir="${dist}" />
          <delete dir="${build}" />
          <mkdir dir="${dist}" />
          <mkdir dir="${build}" />
     </target>
</project>

Perhaps you are using old WLST code (used for OSB 10g), with OSB 11g.
The ALSBConfigurationMBean (com.bea.wli.sb.management.configuration.ALSBConfigurationMBean) Interface in the com.bea.wli.sb.management.configuration package in the Oracle Fusion Middleware Java API Reference for Oracle Service Bus includes example code illustrating how to import and export Oracle Service Bus 11g configurations, how to change environment values, how to query resources, and so on. Please find it here -
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e15033/toc.htm
Regards,
Anuj

Writing a file using ssh in OSB 11g

Hi
OSB 11G
Once I fetch from DB, i am able to write a flat file(delimiter with pipe) using Messaging Service and MFL.
Now, my requirement is to write using SSH .
Can anyone let me know how do I configure it in my Business Service?
Thanks
Edited by: soauser on Jul 12, 2011 9:08 AM

OSB supports SSH File Transfer Protocol (SFTP) using SSH version 2 with SFTP transport -
section "26.5 SFTP Transport" at http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/http_poller.htm#i1085854
If existing options are not sufficient, you may also create custom transport using transport SDK and use that in OSB -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_tsdk.htm#sthref954
Regards,
Anuj

How to Handle Multiple Thread in JAVA Callout with OSB 11g

Hi Team,
With My OSB 11g, I want create a static Thread when Java callout.
Java code as below.
     private static Thread thread;
static {
          * lazy load thread and with thread-safe ensure
          if(thread == null){
               synchronized (HornetQConnectionHelper.class) {
                    thread = new ConnectionRecoveryThread();
                    // Daemon thread, JVM level, Won't be interrupted, Safe!
                    thread.setDaemon(true);
                    thread.start();
When this class was first called in OSB, the thread start run. while when I redeploy it, the old Thread is still running, if call the class again, it will create a new Thread. The two threads will run at the same time.
Any body know how do configure it, so that there is only one static Thread in the Weblogic JVM.
Thanks.
Best Regards,
Raysen Jia

Hi Raysen Jia,
Create a weblogic startup class... See the references bellow...
Hope this is helpful...
http://jagadesh4java.blogspot.com.au/2010/05/working-with-weblogic-startup-shutdown.html
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10126/basic_upgrade.htm#FUPAS464
Cheers,
Vlad

OSB 11g Installation in production environment

I am trying to install OSB 11g in production mode. But, the problem is its always pointing to the evaluation database, even though I don't require any DB (not using the reporting feature or OWSM). I saw the following workaround and it worked fine, but is it the only way?
This error you will normally see if you use the built in pointbase db with production domains only.
I would recommend you use different database in pointbase or better an oracle database. Work around would be to delete WL_LLR* from you point base and the domain will start with out problem.
If you are not aware of how to delete the table in Pointbase/Derby, then other workaround (I normally use when using production domain with Derby/Poinbase) option would be to open config .xml and delete <jdbc-system-resource>
<name>wlsbjmsrpDataSource</name>
<target>AdminServer</target>
<descriptor-file-name>jdbc/wlsbjmsrpDataSource-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Even if i configure a different DB, but it still pointing me to Derby?
Is this a bug with OSB 11g installation in a production env?
Thanks,
Bijoy

Hello Bijoy,
The evaluation database is provided for use by the sample applications and code examples. If you do not want to use evaluation DB then don't install it.
To not install evaluation DB, while installing weblogic, select custom installation type, uncheck the "Evaluation Database" checkbox ("Server Examples" will automatically get unchecked) and proceed. Now your weblogic will be installed without an evaluation DB.
Regards,
Anuj

How to increase JVM memory for Web Logic 10.3.3 - OSB 11g

Hello folks,
I am running OSB 11g on WebLogic 10.3.3 to call some services passing large XMLs requests. These XMLs are something around 10mb each. Unfortunately, I got errors regarding memory.
I am using Eclipse with OSB plugin to develop, and I have configured the weblogic server to start up it from the eclipse, thus I don't need to start up through command line.
I would like to know where I can change the memory arguments to start up the JVM which runs the WebLogic server. As I am starting up the server from eclipse, I can't change the memory size args from command line.
Is there a file where those arguments are stored? or some configuration on WebLogic console which I can increase the Xms and Xmx ?
The JVM is jrockit_160_17_R28.0.0-679
This is the eclipse console output when the server is starting up:
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=C:\Davi\osb\mw_1033\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;;C:\Davi\osb\mw_1033\OSB_OR~1\modules\features\osb.server.modules_11.1.1.3.jar;C:\Davi\osb\mw_1033\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Davi\osb\mw_1033\patch_oepe1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Davi\osb\mw_1033\JROCKI~1.0-6\lib\tools.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\weblogic.jar;C:\Davi\osb\mw_1033\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\webservices.jar;C:\Davi\osb\mw_1033\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Davi\osb\mw_1033\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Davi\osb\mw_1033\osb_ora11g\soa\modules\oracle.soa.common.adapters_11.1.1\oracle.soa.common.adapters.jar;C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Davi\osb\mw_1033\OSB_OR~1\lib\version.jar;C:\Davi\osb\mw_1033\OSB_OR~1\lib\alsb.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-ant.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-common.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-core.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-dameon.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\classes;C:\Davi\osb\mw_1033\OSB_OR~1\lib\external\log4j_1.2.8.jar;C:\Davi\osb\domains\INFOLE~1\config\osb;C:\Davi\osb\mw_1033\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Davi\osb\mw_1033\patch_wls1033\profiles\default\native;C:\Davi\osb\mw_1033\patch_oepe1033\profiles\default\native;C:\Davi\osb\mw_1033\WLSERV~1.3\server\native\win\32;C:\Davi\osb\mw_1033\WLSERV~1.3\server\bin;C:\Davi\osb\mw_1033\modules\ORGAPA~1.1\bin;C:\Davi\osb\mw_1033\JROCKI~1.0-6\jre\bin;C:\Davi\osb\mw_1033\JROCKI~1.0-6\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft Application Virtualization Client;C:\Program Files\Attachmate\Reflection\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Davi\osb\mw_1033\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2123-windows-ia32, compiled mode)
Starting WLS with line:
C:\Davi\osb\mw_1033\JROCKI~1.0-6\bin\java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Davi\osb\mw_1033\WLSERV~1.3 -Dwls.home=C:\Davi\osb\mw_1033\WLSERV~1.3\server -Dweblogic.home=C:\Davi\osb\mw_1033\WLSERV~1.3\server -Ddomain.home=C:\Davi\osb\domains\INFOLE~1 -Dcommon.components.home=C:\Davi\osb\mw_1033\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Davi\osb\domains\INFOLE~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Davi\osb\mw_1033\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Davi\osb\mw_1033\patch_oepe1033\profiles\default\sysext_manifest_classpath weblogic.Server
Thanks in advance,
Davinod
Edited by: user13631313 on Jan 10, 2011 10:07 AM

Hi Davinod,
Yes, the correct place is to change the memory arguments in the "setDomainEnv.cmd", however can you confirm if the changed memory arguments were reflected in the logs or not.
If yes then you need to try to increase the memory arguments again and test which is the best working memory argument suitable for your environment, this would take some trials.
However if the memory arguments are still not reflected then try to set it properly as shown below:
set MEM_ARGS=-Xms1024m -Xmx1024m
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…

Using OSB 11g with OEPE

Hi,
I have downloaded oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32 stand-alone from http://www.oracle.com/technology/software/products/oepe/oepe_11115.html?rssid=rss_otn_soft. I am planning to install Oracle Service Bus 11.1.1.3.0 on a remote server and use the OEPE IDE in my local system to develop the proxy and business services to deploy on the remote OSB server. My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ? And how do I connect from the IDE to the remote OSB server?
Or is it a better option to get the OEPE by installing the OSB 11g server and then abandon the installed server and use the OEPE IDE to connect to a remotely installed OSB server? By doing this, will I get all the plugins that I need for the OSB development pre-configured in the OEPE IDE?
Thanks,
sathish

My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ?Yes. While installing the OSB, go to custom options and you should have a choice to install OSB plugins in any pre-existing OEPE. Personally I have not tried this method.
Or is it a better option to get the OEPE by installing the OSB 11g server and then abandon the installed server and use the OEPE IDE to connect to a remotely installed OSB server?I'm not sure what you meant by "OSB 11g server" but you should use
Oracle WebLogic Server 11gR1 (10.3.3) + Coherence + OEPE - Package Installer to get the weblogic bundled with OEPE, then install Service Bus (11.1.1.3.0)
on this install. OSB plugins required for OEPE will be installed. Now you can use this OEPE to connect to remote OSB server. This is what I personally prefer.
By doing this, will I get all the plugins that I need for the OSB development pre-configured in the OEPE IDE?Yes.
Manoj

Using OSB 11g with OEPE 11.1.1.5.0

Hi,
I have downloaded oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32 stand-alone from http://www.oracle.com/technology/software/products/oepe/oepe_11115.html?rssid=rss_otn_soft. I am planning to install Oracle Service Bus 11.1.1.3.0 on a remote server and use the OEPE IDE in my local system to develop the proxy and business services to deploy on the remote OSB server. My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ? And how do I connect from the IDE to the remote OSB server?
Thanks,
sathish

My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ?Yes. While installing the OSB, go to custom options and you should have a choice to install OSB plugins in any pre-existing OEPE. Personally I have not tried this method.
Or is it a better option to get the OEPE by installing the OSB 11g server and then abandon the installed server and use the OEPE IDE to connect to a remotely installed OSB server?I'm not sure what you meant by "OSB 11g server" but you should use
Oracle WebLogic Server 11gR1 (10.3.3) + Coherence + OEPE - Package Installer to get the weblogic bundled with OEPE, then install Service Bus (11.1.1.3.0)
on this install. OSB plugins required for OEPE will be installed. Now you can use this OEPE to connect to remote OSB server. This is what I personally prefer.
By doing this, will I get all the plugins that I need for the OSB development pre-configured in the OEPE IDE?Yes.
Manoj

Deployment issue with SOA - OSB 11g environment

Hi,
We have Dev Environment configured with SOA 11g (11.1.1.4) and OSB 11g (11.1.1.4) on a single weblogic domain. Developed SOA composite app and deployed to the SOA Server. We are exposing our SOA Composite thru OSB ( created osb proxy and business services and accessed soa composite from the client. It s working fine ) layer for the client to access it. The issue here is while deploying it to the production environment (configured OSB and SOA in two separate WL domain) located offshore.
What i saw from the soa doc is that we need to deploy SOA composite to the SOA Server and OSB Configuration to the OSB Server.
but the offshore person is asking us to deploy both SOA composite & osb to the same OSB Server as an .ear file.
Is it possible to deploy both SOA composite & osb to the same osb server ? is there any document on project that involve both soa and osb.
please guide me how to do the deployment
I appreciate all your help.
thanks
sumesh.j

I am wondering if could able to solve the problem of deploying both SOA composite & osb to the same osb server. Even I am facing the same problem....
If you could able to solve the problem then please let us know the steps that you have followed to solve the same.

OSB 11g help

hello evey one,
i have the following question which is very very important to continue my work with OSB 11g.
i have developed two web services the first takes data from table X and the other one is insert that data to Table Y, and i created a OSB configuration project and OSB project and for now every thing is fine since i can call both web Services useing proxy service from web service client tool.
what i need is how can i set the OSB to call web service 1 automatically every 1 hour, 1 minute its does matter, and send the data to web service two to be inserted???????
please help!!!!!

I suppose you are after a timer transport in OSB here..Please take a look at this article which explains a reference implementation using the weblogic timer service:
http://blogs.oracle.com/jamesbayer/2007/11/weblogic_scheduling_a_polling.html
There are some concrete viewpoints that a service bus is not the right place to put in timer facility.. See the discussion at this thread within this forum:
Re: How to implement in OSB: Scheduling, Timers and Custom properties

OSB 11g - Issue with namespace prefix

Hi,
I have a requirement that , whenever I call my target system through business service, always the prefix for a namespace should be 's'.
I added namespace as -
s : http://www.starstandards.org/STAR
When I create request message before calling the Business service, the prefix is -
star:http://www.starstandards.org/STAR
In OSB 11g, can we control prefix for a namespace?
Thanks in Advance

Disable "Use Chunked Streaming Mode" property in business service configuration and test again. By default, this setting remains enabled.
Regards,
Anuj

OSB 11g Configuration

Similar Messages

Maybe you are looking for