OSB and OSR: automated provisioning in a OSB federation

I am using OSB with OSR in a federation architecture. OSB from domain1 uses dynamic routing to route remote services to domain2. My problem is that I need the routing table will update automatically from the OSR. I need a java class using de ALSBConfigurationMBean. How can I implement this??

Check the javadoc for ALSBConfigurationMBean
This has sample code as well.
regards,
~Krithika

Similar Messages

  • Best practice for OSB, OER and OSR

    Hi,
    I would like to know what are the best practices for using OSB, OER and OSR together in a run-time environment for a simple WSDL service.
    From how I see it:
    1) Create service-definition in OER
    2) Create proxy and business service in OSB
    3) Use harvester to harvest the proxy and business services in OER
    4) Use Exchange Utility to publish the proxy service to OSR
    Then the client and discover the proxy service and use OSB for invoking the operations from service.
    Kindly correct me where I am wrong.
    Some questions:
    1) Do we ever publish business service to OSR? Or is it only meant for proxy services?
    2) Is synching of OSB and OSR only meant when we are not using OER?
    Looking forward...

    Hi Anuj,
    Thanks for the links, they have been helpful.
    I understand now that OSR is only meant to contain only Proxy services. The synch facility is between OSR and OSB so that in case when you are not using OER, you can publish Proxy services to OSR from OSB. What I didn't understand was why there was a option to publish a Proxy service back to OSB and why it ended up as a Business service. From the link you provided, it mentioned that this case is for multi-domain OSBs, where one OSB wants to use the other OSB's service. It is clear now.
    Some more questions:
    1) In the design-time, in OER no Endpoints are generated for Proxy services. Then how do we publish our design-time services to OSR for testing purposes? What is the correct way of doing this?
    Thanks,
    Umar

  • CUP 5.3: Automated Provisioning for UME Roles

    Hi,
    Does CUP 5.3 provide automated provisioning for UME roles or just for R/3 roles?
    Thanks in advance. Best regards,
       Imanol

    In order to use UME provisioning though, the WebAS must have Portal components installed (not necessarily used). The Portal RTA uses the Portal's SPML interface that is installed with portal components.
    And please make sure to check the PAM - I think the Portal RTA only works for 7.00, if I'm not mistaken!
    Frank.

  • How to clear all open GRIRs in the year end and maintained as provision  ?

    Hi Friends,
    I would like to clear all open GRIRs in the year end and maintained as provision.
    in the next year next day i would like to show as open items.
    How can do it ?
    I have tried to clear it. I have maintained OBYP settings also. But i am unable see as clear item.
    Could you explain me how it actuallly works ?

    Hi REddy,
    In most of the cases, the GR/IR account will have a credit balance and would be taken as provision for liability during year end activites. So as a standard practise you need to clear them on year end.
    but if you want to clear them, first you need to deselect check box Post automatically only for GR/IR clearing GL's master data.
    Then pass a adjustment entry like
    GR/IR GL Dr
                To Provision for Liabilites GL: Cr
    Above sample entry is true when your GR/IR account has a CR balance at the year end. if not post it in a reversed manner.
    Now with tcode F-03, for GR/IR GL, choose all items and clear them. Now you will get the clearing doc number.
    Now on start of new FY, reverse the above accounting entry with FB08.
    This will meet your requirement.
    Thanks,
    Srinu

  • LabVIEW Run Time Engine and ActiveX Automation Server

    Hi,
    I have a question related to LabVIEW Run Time Engine and ActiveX Automation Server:
    We have a tool developed in LabVIEW and TestStand. End user interface is a LabVIEW GUI (it's an executable) which executes TestStand sequences. Some TestStand sequences call lower level LabVIEW VIs.
    Everything works fine with LabVIEW installed, but I was wondering if I could run this tool on deployment machine with only LabVIEW run time engine installed. We are using LabVIEW 6.1 and with only the run time engine installed, I get the error message: "Unable to launch the 'LabVIEW.Application' ActiveX automation server ". 
    BTW, we are planning to upgrade the versions soon.
    Is it possible to make things work only with the run time engine?
    Thank you.

    Thanks for the response, Brian.
    I did upgrade to LabVIEW 8.0 and TestStand 3.5. Everything works fine on the development computer where LabVIEW and TestStand is installed. On the target computer in the lab, I installed LV RTE 8.0 and TestStand 3.5, and now when a VI is called in a sequence file, I get the following:
    RunState.PreviousStep.Result.Error.Code  -18002 
    RunState.PreviousStep.Result.Error.Msg  "LabVIEW: The VI is not executable"
    So, the executable opens and works fine (which means that the LV RTE is installed properly), but when a sequence calls a low level VI, it does not make it through.
    comments/suggestions are appreciated. Thanks.

  • How do you copy and paste automation?

    Is there a way to copy and paste automation in logic instead of redrawing the same automation later in the song I asked the same question a few weeks ago and some one replied to go to automation preferences and change the setting move automation with regions to always or ask I did this but this simply just moves the automation with the region if you drag it from its original place I want to copy and paste the region and the have the automation with it hope someone knows what I'm on about cheers
    p.s does any know if there is a key board command to turn the cycle mode on/off I looked in the key command preferences but could not find it

    Hold down the option key, then drag the region. This will copy the regions AND the automation (as long as you have automation preferences set to move the automation with the region).
    Also, there is a hidden feature in Logic, that used to be called the automation folder. t was accessible via a key command in Logic 6, and then they removed that key command in version 7. Why they hid this is beyond me, as it is a very useful thing.
    But if you go to your key commands and assign a key command to "Automation Event List", this will open an Event List window showing you the songs automation. Now with that List Window open, hit Apple/1. This opens a new Arrange page, but you'll notice that this new arrange page is showing you all the songs automation data, represented as regions.
    From this page, you can then cut and move your automation just like you do audio and MIDI regions.

  • Mountain Lion brings bugs and breaks Automator Services

    Just love this Automator tool, been using it to make my Finder dance for a while now.  My fresh install (Erase/USB) of Mountain Lion seems to be reproducibly broken for adding Services, and also appears to have a bug for editing existing Services...
    My steps to failure were as follows:
    Open Automator
    Select and choose "Service" to create a new service
    Find/drag "Get Selected Finder Items" to the service pane
    Find/drag "Launch Application" to the service pane
    Select the desired program/application (in this case a AppleScript.app)
    Change the "Service receives selected" to "Files or Folders", and change "in" to "Finder"
    Select the "Workflow" -> "Run" option to verify that the workflow actually works…  (Note: my Applescript applicaiton needs me to actually select a image file in Finder to properly operate...  But it works just fine in this step).
    Save the new Automator's service workflow (saves to ~/Library/Services as "Convert selected image" - (actually, any name produces the same failure mode.
    Close the new workflow document in Automator
    Verify that the Service exists (is installed) in "~/Library/Services/Convert selected image.workflow"
    Open a new Finder window,
    Ctl-Click on any file or folder, select the Services fly-out context menu: BROKEN: The expected Finder context service text of "Convert selected image" is not available.
    Verify that the Service exists (is installed) in "~/Library/Services/Convert selected image.workflow"
    Go back to Automator, select "File" -> "Open Recent"
    Select the recent "Convert selected image" file, up pops a new "Service Installer" dialog
    Selecting "Open with Automator" works as expected, the file opens in Automator
    Selecting "Cancel" works as expected, nothing happens
    Selecting "Install" in the "Service Installer" dialog pops-up a new dialog warning that the service is already installed, asking if we want to replace it (warning: replacing will overwrite the current file!)
    Selecting "Cancel" works as expected, nothing happens
    Selecting "Replace" pops-up a funky new dialog that warns "Installation failed" because: "Convert selected image.workflow couldn't be moved to "Services" because either the former doesn't exist, or the folder containing the latter does't exist".  Two options are offered: "Open with Automator" or "Done"
    BUG: Selecting "Open with Automator" fails as the "Replace" option in step 21 has DELETED the workflow from the ~/Library/Services folder and it no longer exists…
    Selecting the only remaining option of "Done" returns the duped user to the now empty and lonely Automator.
    Perhaps it's just me (or solar flares)...  Any ideas on how to get my Mountain Lion's malfunctioning (and lonely) Automator Services working again ?
    Thanks in advance.

    Hello!
    There are many more bugs.
    One such...
    For Example, When I enter the actions:
    Action 1. Get specified Finder Items
    (Two excel Files in the list)
    Action 2. Move Finder Items to Trash
    Automator moves the two excel files, AND other files previously created in the workflow to the trash.
    That is new to me.

  • Tip: How to export WITH volume and pan automation

    It is astonishingly simple and I am probably not the first to think of this (...): Do not automate the volume fader and the panpot *on the track*, but insert a Gain plugin and automate its' gain and balance parameters. Those automations will be used when exporting.
    If the instrument has a master volume, you can also automate that, and the same goes when an instrument has a master pan setting. If you automate those, it will be exported.
    regards, Erik.

    lordofthestrings86 wrote:
    You are referring to bouncing down the whole mix to like an .aiff or .wav right?
    Err... no, wrong... I am referring to Exporting (regions, tracks & all tracks) only. As a default, Volume and Pan Automation are not included when Exporting. Send -, Plug In -, Solo - and Mute automation are included. Some people have asked about that in the past, and it can be handy in specific situations. That's all.
    regards, Erik.
    Message was edited by: Eriksimon

  • GL Park and Post Automation

    I am in process for the GL Park and Post automation from current manual process.
    Accountetn - Park
    Mgr - Post
    Mgr II - Post
    1) 50,000.99 and below will park and post without approval
    2) 50,001 to 20 M will require approval and post by next level manager
    3) 20 m and all above have to approval and 2nd level approval would require.
    4) If under scenario 2 primary level manager not available then in certain amount of time automation will trigger to next level manager for approval.
    We have Cross Company with Multiple company codes
    What test scenario i can use please help me

    Hi,
    Please do the following configuration :
    1. Define Tolerance Groups for Employees (OBA4)
    Menu Path
    IMG --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Business Transactions --> Open Item Clearing --> Clearing Differences --> Define Tolerance Groups for Employees
    In that create tolerance groups
    This are the examples of tolerance groups. You can create of your own choice depending on amount.
    2. Assign to users (OB57)
    Menu Path
    IMG --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Business Transactions --> Open Item Clearing --> Clearing Differences --> Assign Users to Tolerance Groups
    In Username enter User ID and in Tolerance group enter Tolerance group created by you in OBA4.
    Please do not delete User ID - SMITH
    3. Give park and Post authorization. You can see user is able to park items in all cases but will be able to post only as per his / her tolerance limit.
    Hope, this solves your issue else revert.
    Regards,
    Tejas

  • InDesign and XML Automation

    I am new to the InDesign and XML Automation process.
    We have a xml file that has 100+ items and our goal is to automate them into a InDesign format (5-6 per page). Does InDesign/XML support this and what is the best approach to do this?

    The full script runs on "the active document", and it's possible that is the point where ID gets confused. Can you re-write it as a function with *one* parameter -- the document to work on?
    Then you can do your loopy (sorry) looping like this:
    someDoc = app.open(files[i]);
    Run("other script", someDoc);
    someDoc.close(SaveOptions.YES);
    "app.open" returns a handle to the ID document once it's opened, and if you save it into a variable you can use this wherever you are using "app.activeDocument" now.

  • Copy And Paste Automation

    Hi there,
    I was wondering if anyone knew of a way to copy and paste automation (without selecting and alt dragging it)? I am used to using pro tools and very frequently use tab to transient and paste automation at that transient, basically I'm looking for a way to mimic that workflow in logic, I'm able to get the tabbing to work fine but am stuck at the copy/paste automation part.
    Thanks a lot in advance for any help,
    David

    silvertonesx24 wrote:
    use the automation event list to copy/paste - default key command is control-command-E
    While you have the automation event list open, go up to the windows command, and open a new arrange window.
    What will open, is what used to be known as as the automation folder. You'll see all the automation in your song displayed as regions. You can simply cut and option/drag the automation, just like you do with audio and MIDI regions.

  • MDT 2013 and RES Automation Manager

    Hi,
    In one of the first step of MDT I'm using a simple script that asks for the country code (e.g. NL), which I would like to store in an environment variable, which I can later on read into RES Automation Manager. But it seems that after MDT is finished and
    Windows starts up, the environment variable is gone.  Are there any other ways to accomplish this? I'm using it to install language specific applications from RES AM, after MDT is finished. The Windows language settings itself I set with the
    CustomSettings.ini, that is based on the same simple script
    [Settings]
    Priority=ByCountry, CountryAbbr,Model,Default
    Properties=CountryAbbr, CountryOU,CustomProperty
    [ByCountry]
    UserExit=ZTIGetCountry.vbs
    CountryAbbr=#GetCountryCode()#
    [NL]
    CountryOU=NL
    CountryOrRegion=31
    InputLocale=0409:00020409
    KeyboardLocale=nl-US
    UserLocale=nl-NL
    UILanguage=nl-NL
    TimeZoneName=W. Europe Standard Time
    ZTIGetCountryCode.vbs
    Function UserExit(sType, sWhen, sDetail, bSkip)
    oLogging.CreateEntry "entered UserExit ", LogTypeInfo
    UserExit = Success
    End Function
    Function GetCountryCode()
    Set objShell = CreateObject("WScript.Shell")
    Set objEnv = objShell.Environment("SYSTEM")
    GetCountryCode = InputBox("Fill in Country Code (NL DE DA FR PT); If default, use None")
    objEnv("MDT_Language") = GetCountryCode
    Set objShell = Nothing
    Set objEnv = Nothing
    End Function
    Any idea what I can do else??
    Thanks,
    Mario

    Hi, this looks quite similar to my blog post I did some time ago:
    MDT 2012 LTI Deployment, Regional and Locale settings based on #chars of Hostname
    The trick in your specific case is to either, not reboot your machine, or to set the installation of RES Automation Manager right after the reboot.
    Basically MDT clean's up it's act after it is finished. This also means the environment variables which are stored in a .dat file in the C:\MININT folder are removed after MDT has finished.
    So either you need to find a way to perform your RES AM job, during the MDT task sequence, or set or dump the environment variables to a file are temporarily variable which RES AM can use.
    Here are some articles that will help you get further:
    MDT and RES Automation Manager – Let’s come together (in Sweet Harmony)
    Creating custom variables in MDT 2013
    Finding All References to MDT Variables in a Deployment Share: VariableDocumentor
    v1.0
    Dumping Task Sequence Variables
    Cheers!
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Provisioning Allowed and Allow Auto-provisioning YES   Role exists No

    Hello,
    I am unable to select the roles while submitting the user provisioning request.
    The role additional details are set Yes for Provisioning Allowed and Allow Auto-provisioning
    But Role exists is showing No; i have tried updating the roles in many ways, everything is getting updated except this paricular field.
    Could you pls help me ...
    Regards,
    Sumanth

    Hello Sumanth,
    Can you successfully generate roles using the role generation option?
    I have the same issue but I presently have issues with generating single roles ONLY as posted on this thread - "Illegal tcodes" error during the role generation phase of ERM in AC10
    ...so I am thinking it is becuase I can't generate single roles that is why the roles are not displaying. However, I can view the roles in other environments like risk analysis but not at the point of access request provisioning. It tells me no roles are available.
    I sure hope someone will be able to help us out.
    Thanks

  • ORA-20001: Schema name SCOTT is a reserved schema and cannot be provisioned

    After upgrade to 1.6:
    ORA-20001: Schema name SCOTT is a reserved schema and cannot be provisioned.
    Any idea ?
    The same for username TEST

    "38452",
    Please read the section "Understanding Oracle Default Schema Restrictions" on page 18-3 of the HTML DB 1.6 documentation.
    Joel

  • ... move all MIDI, audio regions -- AND all automation?

    In GarageBand 3 is there a way to select and move all MIDI and audio regions ... AND all automation?
    I recall this was not possible in GB2.
    Has this been implemented in GB3?
    I need to move EVERYTHING to the right, so I can lengthen my introduction.
    John

    Thanks for your reply!
    After opening a GarageBand project in Logic Express, what happens upon saving? Does Logic save it in a "its" format? if so, is this a normal folder that contains audio files and project files ... or is it a "Package" that trys to keep everything tightly bundled, like with GarageBand?
    So, how many flavors (releases) of Logic are there?
    What are the main limitations of Logic Express (as compared to Logic.)
    John

Maybe you are looking for

  • JPA Error "No Persistence provider for EntityManager",using org.eclipse.per

    Hello Colleagues, I have created JPA project, with out any error have done mapping also. with orm.xml and persistense .xml I am getting No Persistence provider for EntityManager error when calling Entity Manager in Entity class Error >>> EntityManage

  • Need a form filling program for firefox that works like roboform

    when i use internet explorer i have roboform to fill the open data fields but in Firefox i use the automatic form filler, but it seems to only save data and want to reuse it if i have at least been on the site and filled out the fields at least once.

  • Fiscal Calendar in Report Variant Dynamic Date Calculation

    We are switching from the standard calendar to a 4/4/5 calendar for our fiscal calendar. We have a number of batch reports that use dynamic date calculation in the variant to get Month-To-Date or Previous Month date ranges. Is there a way to convert

  • Widgets won't function

    when i open dashboard, none of my widgets show up. when i press the "+", all my widgets show up on the bottom, but when i drag a widget from the menu along the bottom to the upper area on which it's supposed to function, the widget shows up for a sec

  • I have an "unrecoverable error on photoshop cs2.

    I just went on photo shop cs2 and I got a message saying "Unable to continue because of a hardware or system error.Sorry, but this error is unrecoverable." How do I fix this? I reinstalled photo shop I tried restoring my computer, I tried restarting