OSB Business Service not found

Hello,
I'm creating a business service with sbconsole. The enpoint uri is http://localhost:7001/SalesOrders/Order.
I activate the changes with the change control activate button.
I'm checking with IE the link and I am getting Error 404--Not Found.
What am I missing?

Hi,
Can you try opening this in your browser http://localhost:7001/SalesOrders/Order?wsdl
I have an wsdl, and I used it to create a business service
Are you able to run your Business Service successfully.
I used the business service to create a proxy service. When I invoke the proxy service, I'm getting BEA-380002 error code, reason Not Found. The routing node of the proxy service can not find the proxy service.
In your proxy service,under route node please cross check that you are calling the Business Service you created only ?? Or some other service.
Regards,
Karan
Oracle Fusion Middleware Blog

Similar Messages

OSB Business service not returning error payload

Hello,
I have some RESTful services in the OSB 10.3. On an HTTP error, the business service reads the error code (for example http error code 500) and it returns it to the proxy service. But the message of the error seems not to be read at all. How can I do that?
Thanks!

I don't get any error message. I'l rephrase:
I work with REST (Any XML service). My BusinessService calls an external RESTful webservice, and this external webservice returns an HTTP packet like this (more or less):
PACKET BEGIN:
HTTP/1.1 500 Internal Server Error
Date: Wed, 29 Sep 2010 13:37:50 GMT
Content-Length: 0
Content-Type: text/xml; charset=UTF-8
<?xml version="1.0" encoding="UTF-8"?><Error><Message>There was a blablabla error on our side. Sorry.</Message></Error>
PACKET END.
I am able to propagate such an HTTP error code by using an insert in the ErrorHandler, but I am not able to propagate the XML message that is being returned to me. It is not found anywhere, I checked all he variables $body, $fault, etc.
Does the OSB BusinessService read this payload at all or should I implement a custom callout procedure because of this?
Edited by: user4507278 on Sep 30, 2010 5:35 AM

OSB Business service not getting created

Dear team,
We created a db adaptor which invokes a DB procedure with input paramter as tabletype .
Db procedure and tabletype are in same schema .
We are trying a generate a Business service based on jca file. We are getting error
"Error while retrieving information from JCA file".
Can you please suggest

1. What instrument did you use for creating Business Service?
2. How did you create the Business Service step by step?
3. Can you please attach JCA, WSDL, XSD for Db procedure?

OSB 11g: Business Service not getting reply back from distributed queue

Here is the scenario:
OSB Domain A has a Business service that does a JMS send to a distributed JMS queue hosted on another WLS domain.
It expects a response from a distributed queue sitting on this same remote WLS domain.
The remote WLS domain is configured as a Foreign JNDI Provider in the OSB Domain with the request and response queues defined. Testing this business service, we see that messages are being posted to the remote request queue fine, and that the message are being picked up and processed. The response was sent to the response queue, but the message just sits there, the OSB business service did not pick it up. I can see 16 active Consumers on the response queue, presumably from the OSB business service?
Using CorrelationID.
URI for request/response queues are using the locally defined JNDI name for the queues and connection factories from the Foreign JNDI Provider definition:
- URI for request queue: jms:///[RemoteXAConnectionFactoryX]/[LocalJNDINameForRequestQueue]
- URI for response queue: jms:///[RemoteXAConnectionFactoryX]/[LocalJNDINameForResponseQueue]
Completely stumped at the moment...anybody has any ideas?
Thanks,
Melvin

Hi,
I am also facing the similar kind of issue as below. After placing the message in to request Queue, I need that message Id as response to that Business service. Please provide the solution for the below issue. Thanks in advance.
Thanks,
bharath.

OSB business service transforming a date column 1936 to 2036 ( 1950)

Hello, I'v a database view with a normal date column "geburtsdatum".
Data Dictionary:
GEBURTSDATUM DATE
Now with JDeveloper I create a db-adapter. This works fine.
On OSB I do generate a business service on the just created jca file. Also this works fine.
XSD for db adapter:
<xs:element name="geburtsdatum" type="xs:dateTime" minOccurs="0" nillable="true"/>
I can test this business service successfully, everything is fine, but not the date interpretation when birtdate <1950
Sample geburtsdatum (birtdate): 29-JUL-1934
DATABASE: 29.07.1934
OSB Business Service: 29.07.2034
Why or where happends this date conversion?
This is very strange, anyone had the same problem?
Any help would be appreciated.
Thanks
Best regards,
Reto

After all I found the solution. Again the problem has been caused on DB side.
I'm using a view. On this view I had a DATE column with a decode. I think I did a clean TO_DATE casting, but it seems as the OSB DB Adapter did not interpret this correctly.
(on database side with SQL I did not have any problems here)
My solution was:
Using a date returning function (which does my decoding) in my view :
CREATE VIEW xyz AS
SELECT ...
, myPackage.removeMaxDate(n.geburtsdatum) as geburtsdatum
FROM ...
Regards,
Reto

JSSE causes OSB business services to receive Socket Closed

Using WL 10.3.3 & OSB 11gR1 on jrockit 1.6.0_45 Redhat:
After enabling the "Use JSSE SSL" option in the managed servers's SSL tab ( because web service clients want to use SHA256 certificates ), OSB business services ( outbound to service providers ) fail with
Exception - Body: <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Fault xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>BEA-380000</faultcode>
<faultstring>General runtime error: socket closed</faultstring>
After a lot of debugging, I've found that the Connection Timeout option within the OSB HTTP transport is involved.
OSB business services which use https AND have a non-zero value for HTTP transport's Connection timeout cause the Socket Closed error.
Business services which do not use HTTPS or do not have a Connection Timeout do not receive the error.
While setting the Connection Timeout to 0 allows the transaction to succeed, that leaves the OSB server vulnerable when the service provider host is not available.
So I've reset the Connection Timeout values to 0, and added this JVM parameter to each OSB managed server
-Dweblogic.http.client.defaultConnectTimeout=5000

There are few BUGs reported for similar issues.
OSB Server Showing "java.io.IOException: SSLEngine is closed" When Attempting to Connect to an External Web Service Using Two-Way SSL (Doc ID 1465618.1)

Context menu tab SERVICE not found in IB PI 7.1

Hi,
I am working in PI 7.1 for a scenario IDOC r/3 to PI 7.1 file.
Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 > Message split according to Receiver list>'Party and service not found'.
I am new to this. Could someone guide me with steps or links. I searched some links but I didnt get answers.
Thanks,
Deepak.
Edited by: KDeepak on Jul 2, 2009 2:36 PM

Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 --> Message split according to
Receiver list-->'Party and service not found'.
Is it that you are looking for a tab which was called Business Service in PI7.0?........if yes then in PI7.1 we do not have such a tab.....it has been renamed as Business Component ......in ID right-click -
> New -
> Collaboration Profile -
> Business Component ---> Give Name ---> Click Create and then one more Business Component (Service) will be created under Communication Component section of ID
In PI7.1 Business System, Business Component, Integration Process will be under Communication Component..
Check if this is what you are looking at...
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 3, 2009 10:09 AM

OSB Business Service Work Manager Doesnt Throttle

Hi,
I have a requrirement to throlle the number of concurrent requests going to an end point.
So i have used OSB business service where in i am calling an end point webservice, and configured a work manager in console and selected it in the dispatch policy
I deployed the workmanager on managed server. i specified max concurrent threads as 3.
I tried to test it and see that throttling doesnt really work.. All the requests sent are being sent at once not 3 at a time.
The expected behavior is first 3 sdhud go and then onc ethey complete next 3 similary next 3. But i dont see that behavior. Please let me know if i am doing any worng
below is my work manager configuration
Service Type Any XML Service
Transport Configuration
Protocol http
Load Balancing Algorithm round-robin
Endpoint URI <Specified the end point URI>
Retry Count 0
Retry Iteration Interval 0
Retry Application Errors Yes
HTTP Transport Configuration
Read Timeout 0
Connection Timeout 0
HTTP Request Method POST
Authentication None
Proxy Server
Follow HTTP redirects Disabled
Use Chunked Streaming Mode Enabled
Dispatch Policy WorkManagerTest
Message Handling Configuration
XOP/MTOM Support Disabled
Page Attachments to Disk No
Result Caching Not Supported
Any suggestions on this?
Edited by: 791951 on Mar 17, 2011 7:51 AM

If you need to throttle the Business service, then you should configure the throttling parameters in the Business Service -> Operational Settings tab
Choose your Business Service in the OSB Console -> Operational Settings
Throttling -Check this box to enable the throttling. Maximum Concurrency to 3, and Throttling Queue to x number of messages you wish to hold in the throttling queue

Business system not found in CPACache

Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
Venkat

Hi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana

Windows 7 64 bit, Apple Mobile Device Service not found.

Hi First post, sorry sorry if this is in the wrong place
I have a dell Laptop running Windows 7 X64 and Apple Mobile Device Service is not installing and cannot be found in services.
note the account has Admin privildges (the logging below is wrong) and UAC and Virus protection has been switched off.
I have used the apple processes to uninstall everything and then reinstall multiple times. I am defintly trying to install the latest 64 bit version.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1545
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D67ADF69AA323879
Current user is not an administrator.
The current local date and time is 2010-01-11 16:46:14.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
thanks

I am having the same problem for three-four months now. When I called the help-desk of apple, they said windows 7 x64 wasn't compatible with itunes, and they told me that I had to wait for a newer version of itunes.

SPROXSET ...Unable to rectify Business systems not found issue..

Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
Teresa

Check RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

Addon has failed to connect to the DI API. Service Not found

Hi
I've upgraded database B1 8.8 SP0 PL11 to B1 8.8 SP0 PL15.
Addon was complied on B1 8.8. SP0 PL11 envrionment.
I've error message when I started addon.
Addon_Name addon has failed to connect to the DI API.
Error Details:
Service not found.
DI API was uninstalled and re installed.
And I deleted SM_OBS_DLL directory.
But I can not resolve this issue.
Please help me,
Joanne

Hi Joanne,
I had exactly the same problem with patch 15 after an upgrade from 8.8 patch 13. The SBO client didn't automatically update so I had to use Add/Remove programs to remove the old client and DI API and then the new client install failed from the B1_SHR folder with a 1158 error (no description).
What I did to correct it was install the DI API from the <servername>\B1_SHR\B1DIAPI folder and then run the client install afterwards. This time the client install worked fine and I can run addons that use the DI API. I think there was some registry entry issues, maybe with the upgrader or the client installer.
Kind Regards,
Owen

Import javax.xml.ws.Service not found

I am getting error import javax.xml.ws.Service not found. Which jar file I should add in JDeveloper and from where?
This is my program:
package examples.shop.client;
import java.net.URL;
import javax.xml.namespace.QName;
import javax.xml.ws.Service;
import examples.shop.impl.session.PricerBean;
* This class is an example of a standalone JAX-RPC client code which uses both
* the static stub and the dynamic proxy approach to get a reference to the
* remote Web Service
public class PricerClient {
static String host = "localhost";
static String portType = "PricerBean";
static String serviceName = "PricerService";
static String serviceEndpointAddress =
"http://" + host + ":8080/" + serviceName;
static String nameSpace = "urn:session.impl.shop.examples";
public static void main(String[] args) throws Exception {
URL wsdlLocation =
new URL(serviceEndpointAddress + "/" + portType + "?WSDL");
QName serviceNameQ = new QName(nameSpace, serviceName);
// dynamic service usage
Service service = Service.create(wsdlLocation, serviceNameQ);
PricerBean pricerPort = service.getPort(PricerBean.class);
String user = "Gerald";
System.out.println("Tax rate: " + pricerPort.getTaxRate());
System.out.println("Discount for : " + user + " is " +
pricerPort.getPersonalDiscountRate(user));
System.out.println("Discount for 1 item (at $1000,- per piece) for " +
user + " is " +
pricerPort.getDiscount(1, 1000, user));
System.out.println("Discount for 5 items (at $1000,- per piece) for " +
user + " is " +
pricerPort.getDiscount(5, 5000, user));
Thank you.

I have Oracle JDeveloper Studio Edition Version 10.1.3.2.0.4066.
Please note I have already added following libaries, jars to Tool->Project Properties->Libraries in JDeveloper.
EJB3.0, TopLink Essentials JPA, J2EE, Jws-api.jar, Ejb30.jar, JSP Runtime, JAX-RPC Client, TopLink, JDeveloper Runtime, Embedded OC4J client, Jaxrpc-api.jar, Wsserver.jar
Thank you.

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

OSB business service and NTLM authentication

Hi,
Is there a solution to use OSB business service with http transport and this bs authenticates itself with NTLM
thanks Edwin

Hi Manoj,
We want to connect our production esb to the ERP ( IFS) system and we want to do this with the OSB. The ERP system has a lot http services and they are all running on jboss. On this app server they have enabled ntlm so users can their account to fill in there project hours /administration.
I got this working with a authenticator in a jdeveloper 11g web service proxy client. ( http://biemond.blogspot.com/2009/04/jax-ws-web-service-proxy-client-and.html )
thanks Edwin

OSB Business Service not found

Similar Messages

Maybe you are looking for