OSB error "Pending resource availability " please reply ASAP

I have the problem with OSB 10.2. I can not get the file system backup and
I get following error.
"Pending resource availability "
Oracle Secure Backup

Similar Messages

OSB error Pending resource availability

In Oracle Secure backup getting error Pending resource availability while starting the backup.
but restoration is working fine with the same tape..
Please help me ASAP.
Thanks & Regards,
Maruthi.G,
*** phone number removed by moderator - this is not an official support channel and personal contact details should not be included ***

Hi.
When I try to start a backup schedule, the catxcr command show the message : "No volume could be found in lib1 (for drive tape1) to use for job admin/7.1."
I don´t know the reason, because I insert a volume.
Please help.
root@bgtd T4# lsvol -L SL150 -l
bash: lsvol: command not found
root@bgtd T4# obtool lsvol -L SL150 -l
Oracle Secure Backup 10.4.0.3.0
Warning: auto-login failed - login token has expired
login: admin
Password:
Inventory of library SL150:
    in    1:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    2:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    3:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    4:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    5:             vacant
in
dte:
vacant
ob> lsdev --long SL150
SL150:
Device type:
library
Model:
[none]
Serial number:
[none]
In service:
yes
Debug mode:
no
Barcode reader:
default (hardware-selected)
Barcodes required:
no
Auto clean:
no
Clean interval:
(not set)
Clean using emptiest:   no
Ejection type:
auto
Min writable volumes:   0
UUID:
3d467542-9944-1032-9254-c8c374159d95
Attachment 1:
Host:
bgtd
Raw device:
/dev/scsi/changer/c4t500104F000D7B072d1
tape1:
Device type:
tape
Model:
[none]
Serial number:
[none]
In service:
yes
Library:
SL150
DTE:
1
Automount:
yes
Error rate:
8
Query frequency:
[undetermined]
Debug mode:
no
Blocking factor:
(default)
Max blocking factor:
(default)
Current tape:
[unknown]
Use list:
all
Drive usage:
23 seconds
Cleaning required:
no
UUID:
71373288-9944-1032-9254-c8c374159d95
Attachment 1:
Host:
bgtd
Raw device:
/dev/scsi/sequential/c4t500104F000D7B072d0
ob>

Backup job state pending resource availability   Deferred because a required device is not available

Hi
I had OSB 10.4.0.1.0
my backup job were running successfully for more than 3 months
last week I started getting : backup job state: pending resource availability
deferred because a required device is not available
Job created.
Dispatching job to run on administrative server.
Drive or volume on which mount attempted is unusable.
My obtool -ldev -g is :
tape01-lib:
    Device type:            library
    Model:                  [none]
    Serial number:          [none]
    In service:             yes
    Debug mode:             no
    Barcode reader:         yes
    Barcodes required:      yes
    Auto clean:             no
    Clean interval:         (not set)
    Clean using emptiest:   no
    Unload required:        yes
    Ejection type:          auto
    Min writable volumes:   0
    UUID:                   252d62dc-d8ec-102b-bceb-001d092aeca1
    Attachment 1:
        Host:               server1
        Raw device:         /dev/sg3
    Connection type:        [unknown]
    Inquiry data:
        Vendor:             IBM
        Product:            3573-TL
        Firmware:           C.30
        Serial number:      00X2U78G7865_LL0
opening handler: device is busy
tape01-tape:
    Device type:            tape
    Model:                  [none]
    Serial number:          [none]
    In service:             yes
    Library:                tape01-lib
    DTE:                    1
    Automount:              yes
    Error rate:             [disabled]
    Query frequency:        [undetermined]
    Debug mode:             no
    Blocking factor:        (default)
    Max blocking factor:    (default)
    Current tape:           4
    Use list:               1-20
    Drive usage:            7 months, 3 weeks
    Cleaning required:      yes
    UUID:                   2dfadcfa-d8ec-102b-bceb-001d092aeca1
    Attachment 1:
        Host:               server1
        Raw device:         /dev/sg2
    Connection type:        [unknown]
    Inquiry data:
        Vendor:             IBM
        Product:            ULT3580-TD4
        Firmware:           C7QH
        Serial number:      1310113272
    Hardware compression:   not available
    Hardware encryption:    not available
please I need help
Thanks

What does an lsvol on the library show? What about an lsj -l on the job ? We need to be able to see what tapes are available and what the job is looking for .
Thanks
Rich.

How to put continuos (desired format) of dates in numbers spreadsheet and how to do it? please reply asap i need it..

how to put continuos (desired format) of dates in numbers spreadsheet and how to do it? please reply asap i need it..

This is the definition for "continuo" from Apple's dictionary:
continuo |kənˈtinyəˌwō | (also basso continuo) noun (pl. continuos) (in baroque music) an accompanying part that includes a bass line and harmonies, typically played on a keyboard instrument and with other instruments such as cello or bass viol.
Presumably you mean something else. Your chances of getting replies that can help you will improve with a clearly stated question.
SG

HT6533 Where can I find the third party app? I'm really in trouble that I can't record and check my blood glucose. Of cause I exported the data from app, but It's not readable for me. Please reply ASAP and give me other solution.

Where can I find the third party app?
I'm really in trouble that I can't record and check my blood glucose.
Of cause I exported the data from app, but It's not readable for me.
Please reply ASAP and give me other solution.

You find third-party apps in the App Store. What app are you looking for? Due to problems, Apple removed the ability to record that information in Health. You can always go back to whatever you used before three weeks Health was released. Why can you not check and record your blood glucose? I would assume you check it using blood samples and a glucose meter which has nothing to do with your phone. You should be able to record it in any number of apps, from Notes to purpose made third-party apps.

IMac G3 upgrade from os9 to osx 10.2 possible? Please reply asap

Hi, i have a apple iMac G3 DV strawberry machine currently running os9.0.4, it has 20gb hardrive and 256mb RAM.
Is is possible to upgrade the machine straight to OSX 10.2 with the original disks based on the specifications i have given?
Please reply asap, as i would like to get it up and running for my partner

If the iMac's CPU speed is 333MHz or below, you need to partition the drive so that the first partition is less than 8GB, and then install Mac OS X onto that partition.
If the iMac's CPU speed is 350MHz or above, you need to update to 9.1, and then run the iMac firmware updater.
(11483)

Why i can't sign in Twitter in my Mozilla Firefox? Please reply ASAP

I have latest version of Firefox. I can access twitter.com but each time i want to sign in, i can't. After fill username & password column, i always redirected to beginning page of Twitter. I can't sign in. Please reply ASAP.

Make sure you don't block cookies for twitter.com.

Please reply ASAP

Hi
I have Microsoft Windows Server 2003 R2 standard X64 Edition.I tried to install oracle 9i(9.2.0.1 32 bit for windows) on this server but installation was never successful. Do i need to go for a Oracle 9i(9.2.0.1 64bit for windows) or any other problem? Even i completely remove windows server and reinstall it completely but still problem is there. Please reply me ASAP as this is our production server.
Thanks.
Regards,
RJ.

From Oracle:
32-bit Information
Currently this platform is ONLY certified 32-bit Oracle on a 32-bit operating system.
There is only 32bit 9i available for 32bit OS on this platform, even if hardware architecture is 64bit. So you need either Windows 32bit or you have to go for 10g.
Werner

Database and application getting hange (urgent please reply asap)

hi,
in alerlt log i found
Process q003 died, see its trace file
Thu Nov 24 10:50:36 IST 2011
ksvcreate: Process(q003) creation failed
Thu Nov 24 10:56:21 IST 2011
ksvcreate: Process(m000) creation failed
Thu Nov 24 11:03:30 IST 2011
kkjcre1p: unable to spawn jobq slave process
Thu Nov 24 11:03:30 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.trc:
Thu Nov 24 11:04:21 IST 2011
Beginning log switch checkpoint up to RBA [0x25b4.2.10], SCN: 14824976075
Thu Nov 24 11:04:21 IST 2011
Thread 1 advanced to log sequence 9652 (LGWR switch)
Current log# 8 seq# 9652 mem# 0: /log1/PROD/log08a.dbf
Current log# 8 seq# 9652 mem# 1: /log1/PROD/log08b.dbf
Thu Nov 24 11:06:40 IST 2011
ksvcreate: Process(m000) creation failed
Thu Nov 24 11:10:00 IST 2011
Completed checkpoint up to RBA [0x25b4.2.10], SCN: 14824976075
Thu Nov 24 11:10:34 IST 2011
kkjcre1p: unable to spawn jobq slave process
Thu Nov 24 11:10:34 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.trc:
Thu Nov 24 11:12:55 IST 2011
ksvcreate: Process(q000) creation failed
Thu Nov 24 11:15:12 IST 2011
kkjcre1p: unable to spawn jobq slave process
Thu Nov 24 11:15:12 IST 2011
Errors in file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.trc:
Thu Nov 24 11:17:14 IST 2011
ksvcreate: Process(m000) creation failed
please reply it urgent..
in trc file
$ cat prod_cjq0_13539.trc
Dump file /appl2/oracle2/proddb/10.2.0/admin/PROD_winsome/bdump/prod_cjq0_13539.
trc
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /appl2/oracle2/proddb/10.2.0
System name: SunOS
Node name: devserver
Release: 5.9
Version: Generic_118558-06
Machine: sun4u
Instance name: PROD
Redo thread mounted by this instance: 1
Oracle process number: 10
Unix process pid: 13539, image: oracle@devserver (CJQ0)
*** 2011-11-24 10:57:22.769
*** SERVICE NAME:(SYS$BACKGROUND) 2011-11-24 10:57:22.430
*** SESSION ID:(392.1) 2011-11-24 10:57:22.430
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 10:57:32.840
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 10:57:42.940
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 10:57:53.030
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 10:58:03.120
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 10:58:13.200
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:03:30.801
*** 2011-11-24 11:07:41.160
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:07:51.240
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:08:01.320
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:08:11.390
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:08:21.480
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:08:31.580
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:10:34.930
*** 2011-11-24 11:13:56.060
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:14:06.150
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:14:16.250
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:14:26.330
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:14:36.410
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:14:46.480
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:15:12.996
*** 2011-11-24 11:18:15.140
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:18:25.240
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:18:35.340
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:18:53.340
Waited for process J000 to initialize for 90 seconds
*** 2011-11-24 11:18:53.340
Process diagnostic dump for J000, OS id=3356
*** 2011-11-24 11:19:29.960
loadavg : 0.08 0.25 0.78
swap info: free_mem = 91.27M rsv = 10468.67M
alloc = 9840.79M avail = 291.52 swap_free = 919.41M
skgpgcmdout: read() for cmd /bin/ps -elf | /bin/egrep 'PID | 3356' | /bin/grep -
v grep timed out after 15.000 seconds
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=36.292000 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:19:29.960
*** 2011-11-24 11:19:40.060
Waited for process J000 to initialize for 100 seconds
*** 2011-11-24 11:19:40.060
Process diagnostic dump for J000, OS id=3356
*** 2011-11-24 11:20:08.770
loadavg : 0.27 0.28 0.77
swap info: free_mem = 92.57M rsv = 10465.16M
alloc = 9837.60M avail = 297.86 swap_free = 925.42M
skgpgcmdout: read() for cmd /bin/ps -elf | /bin/egrep 'PID | 3356' | /bin/grep -
v grep timed out after 15.000 seconds
*** 2011-11-24 11:20:51.830
Stack:
skgpgcmdout: read() for cmd /bin/sh -c '/usr/proc/bin/pstack 3356 2>&1' timed ou
t after 1.290 seconds
Process diagnostic dump actual duration=1 min 11 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:20:51.830
*** 2011-11-24 11:21:01.930
Waited for process J000 to initialize for 110 seconds
*** 2011-11-24 11:21:01.930
Process diagnostic dump for J000, OS id=3356
loadavg : 0.12 0.24 0.71
swap info: free_mem = 91.25M rsv = 10487.99M
alloc = 9844.82M avail = 272.81 swap_free = 915.98M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY T
IME CMD
8 Z oracle2 3356 1 0 0 0
:00 <defunct>
*** 2011-11-24 11:22:36.567
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=1 min 34 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:22:36.567
Killing process (ospid 3356): (reason=x4 error=0)
... and the process is still alive after kill!
*** 2011-11-24 11:28:16.400
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:28:26.470
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:28:36.560
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:28:46.640
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:28:56.730
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:29:06.810
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:29:48.503
*** 2011-11-24 11:35:26.030
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:35:36.130
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:35:46.210
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:35:56.310
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:36:06.390
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:36:16.490
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:38:51.157
*** 2011-11-24 11:47:42.830
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:47:52.910
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:48:03.000
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:48:13.060
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:48:23.140
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:48:33.230
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:49:12.586
*** 2011-11-24 11:52:35.420
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:52:45.520
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:52:55.610
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:53:05.700
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:53:15.790
Waited for process J000 to be spawned for 100 seconds
*** 2011-11-24 11:53:25.890
Waited for process J000 to be spawned for 110 seconds
*** 2011-11-24 11:53:59.129
*** 2011-11-24 11:57:08.260
Waited for process J000 to be spawned for 60 seconds
*** 2011-11-24 11:57:18.350
Waited for process J000 to be spawned for 70 seconds
*** 2011-11-24 11:57:28.450
Waited for process J000 to be spawned for 80 seconds
*** 2011-11-24 11:57:38.540
Waited for process J000 to be spawned for 90 seconds
*** 2011-11-24 11:57:48.640
Waited for process J000 to initialize for 100 seconds
*** 2011-11-24 11:57:48.640
Process diagnostic dump for J000, OS id=4205
loadavg : 0.22 0.33 0.67
swap info: free_mem = 91.70M rsv = 10505.02M
alloc = 9858.01M avail = 251.46 swap_free = 898.47M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY T
IME CMD
8 S oracle2 4205 1 0 39 20 ? 410092 ? 11:57:12 ? 0
:00 ora_j000_PROD
*** 2011-11-24 11:58:28.337
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=39.697000 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:58:28.337
*** 2011-11-24 11:58:38.430
Waited for process J000 to initialize for 110 seconds
*** 2011-11-24 11:58:38.430
Process diagnostic dump for J000, OS id=4205
*** 2011-11-24 11:59:10.850
loadavg : 0.59 0.40 0.68
swap info: free_mem = 91.31M rsv = 10505.02M
alloc = 9858.01M avail = 251.19 swap_free = 898.20M
skgpgcmdout: read() for cmd /bin/ps -elf | /bin/egrep 'PID | 4205' | /bin/grep -
v grep timed out after 15.000 seconds
Skipping stack dump because max dump time exceeded.
Process diagnostic dump actual duration=32.420000 sec
(max dump time=30.000000 sec)
*** 2011-11-24 11:59:10.850
Killing process (ospid 4205): (reason=x4 error=0)
... and the process is still alive after kill!
$
now i am not able to connect database

Please see these docs.
Ksvcreate: Process(M001) Creation Failed , Database hang [ID 1233079.1]
ORA-00610 And/Or "unable to spawn jobq slave process " And/Or "Process(<>) creation failed" In The Alert Log And/Or TNS-12518/ TNS-12500 In Listener Log [ID 416244.1]
DATABASE CRASH WITH SGA_TARGET [ID 747812.1]
ORA-27300 ORA-27301 ORA-27302 ORA-27303 skgpspawn5 [ID 1125188.1]
Database Crashes With Ora-00449 and Ora-00601 [ID 730287.1]
If this is your production database, please log a severity 1 SR!
Thanks,
Hussein

Wether to use NTFS for mac osx???? please reply ASAP

I just bought a seagate 1tb hd..nd it has mac installer o. It..which uses NTFS for mac osx software go make it mac and windows compatible. .
After I installed it hd ws working gr8 ..bt mu machine started showing "no bootable disk--insert boot disk and press any key" on a black screen..now I hav started the mac somehow bt dunno whether to use the software again or not...
Please help asap. .

iamjaycee, greetings; Please note this extract from Wikipedia. Now there is software available that will allow NFTS to operate in a Mac environment, but it has had mixed reviews.
If there is something that I may have overlooked, please do advise. I am one who believes that the learning process should never cease.
Ciao.

Hibernate Mapping Exception Error reading resource: Help Please

I've downloaded Hibernate this weekend and have been working at getting this up and running in my spare time. I've run into a problem and can't seem to find the solution. I'm hoping some one here can help me out.
I'm running MyEclipse
MySQL
and Hibernate 2 in a struts application
I've only got one form and table that I'm trying to map right now, but I get the above error when I run this line of code.
Configuration cfg = new Configuration().addClass(AddCustomerForm.class);
Does anyone have any ideas. Here are the important sections from the two configuration files

<hibernate-configuration>
    <session-factory>
        
        <property name="connection.username">PaintTracker</property>
        <property name="connection.url">jdbc:mysql://127.0.0.1:3306/PaintTracker</property>
        <property name="dialect">net.sf.hibernate.dialect.MySQLDialect</property>
        <property name="connection.password">PaintTracker</property>
        <property name="connection.driver_class">com.mysql.jdbc.Driver</property>
        <property name="show_sql">true</property>
        <mapping resource="com/PaintTracker/struts/form/AddCustomerForm.hbm.xml"/>
    </session-factory>

<hibernate-mapping>
     <class name="com.PaintTracker.struts.form.AddCustomerForm" table="customer">
          <id name="customerID" column="CustomerID" type="java.lang.Long" unsaved-value="0">
               <generator class="identity"/>
          </id>
          <property name="firstName" column="FirstName" type="java.lang.String"/>
          <property name="lastName" column="LastName" type="java.lang.String"/>
          <property name="streetAddress" column="StreetAddress" type="java.lang.String"/>
          <property name="middleInitial" column="MiddleInitial" type="java.lang.String"/>
          <property name="city" column="City" type="java.lang.String"/>
          <property name="state" column="State" type="java.lang.String"/>
          <property name="zipCode" column="ZipCode" type="java.lang.String"/>
          <property name="phoneNumber" column="PhoneNumber" type="java.lang.Long"/>
          <property name="emailAddressLeft" column="EmailAddressLeft" type="java.lang.String"/>
          <property name="emailAddressRight" column="EmailAddressRight" type="java.lang.String"/>
          <property name="company" column="Company" type="java.lang.String"/>
     </class>
</hibernate-mapping>

ok finally gotten back to this and rewrote a bunch of the code. I'm getting almost the same error, but not quite.
I'm still getting org.hibernate.MappingException: Error reading resource: but it is pointing to the first mapping resource located inside the hibernate.cfg.xml.. so I know it is finding and making it inside the hibernate.cfg.xml.
this is the code that the exception occurs in.
the actual line is the configuration.configure(); in the else statement.
public HibernateUtil(URL url2) {
          Configuration configuration = new Configuration();
          log.info("configuration_static is null");
          log.debug("configuring configuration_static from " + url2);
          try {
               if (url2 != null)
                    configuration.configure(url2);
               else
                    configuration.configure();
               this.sessionFactory = configuration.buildSessionFactory();
               log.info("Configuration complete");
          } catch (HibernateException e) {
               log.error(e);
               System.out.println(e);
               configuration = null;
               log.info("Configuration failed. Setting config to null!");
     }The resource I am trying to read is located correctly (eclipse lets you navigate to and choose the xml file to use.. it then builds the hibernate.cfg.xml file for you.)
here is a copy of the resource that is giving me a problem... whichever resource I have listed first is the one the exception is thrown for... so I'm hoping I just have something mixed up in the way I'm writing my xml files.
<hibernate-mapping package="com.WorkoutTracker.db.model">
     <class name="com.WorkoutTracker.db.model.User" table="user">
          <id name="userID" column="userId" type="java.lang.Long" unsaved-value="0">
               <generator class="increment"/>
          </id>
          <property name="userFName" column="userFName" type="java.lang.String"/>
          <property name="userLName" column="userLName" type="java.lang.String"/>
     </class>
</hibernate-mapping>

I bought an iPad Mini on States 2 Months ago and yesterday i saw that the LCD have a black line in the middle can i use the warranty here on Power Mac Philippines ? Please Reply ASAP

I bought an iPad Mini on States 2 Months ago and yesterday i saw that the LCD have a black line in the middle can i use the warranty here on Power Mac Philippines ? Please Reply ASAP

Hi
You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
"No Apple store will accept an iPhone shipped to them"
All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
HTH?
Tony

Trigger Mutating Probelm...Please reply ASAP.

Dear all,
I have a table Hdr which is Header table for all tran tables i want to update
a field update_date in Hdr every time update (DML) is fired,
i can't enforce this at form level because i want to keep track even at sql prompt changes.
there is other option DBA Auditing but if sys updates the table it does n't changes
and i can't get the value in update_date field
if i write database trigger to update the field it is giving mutating error.
please find a right solution and reply
thanks for every effort u put to solve this.
thank u once agin.
Raj
mail : [email protected]

You are probably getting the mutating table error because you are trying to use an actual update statement inside the trigger. You cannot do any DML on the table that the trigger is on. You can access the fileds of the table using the :new.column_name syntax. So, the correct way to write your auditing trigger is something like:
CREATE TRIGGER my_audit
BEFORE INSERT OR UPDATE ON hdr
FOR EACH ROW
upd_date DATE;
BEGIN
SELECT sysdate INTO upd_date FROM dual;
:new.update_date := upd_date;
END;TTFN
John

PLEASE REPLY ASAP.Unbale to connect to oracle data base using JSP.

hi,
I am not able to connect to oracle data base using JSP. PFB the code and out put.
<html>

<%@ page import = "java.sql.*" %>
<body>
<%
try
out.println("hi<br>");
Connection conn = DriverManager.getConnection("jdbc:oracle:oci:@xxx.xxx.xx.xxx:xxxx:flstr800","user","paswordd");
out.println("connected<br>");
catch (SQLException e)
out.println("ERROR: failed to connect!");
out.println("ERROR: " + e.getMessage());
e.printStackTrace();
return;
%>
</body>
</html>
OUTPUT:
hi
ERROR: failed to connect! ERROR: No suitable driver found for jdbc:oracle:oci:@host:port
Please guide me on this issue.
Edited by: user10997061 on Apr 10, 2009 4:27 AM

I definitely do not know much about JSP but
http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.html
indicates
<quote>
This URL connects to the same database using the the OCI driver and the SID inst1 without specifying the username or password.
jdbc:oracle:oci:@myhost:1521:inst1
<quote>
I do not see the port information in your connect string. Is that an issue?

HT5312 i forget rescue email adress and security question too ,..... any sloution please reply ASAP

i can't buy any thing because i forgot my both security question and resuce emial address please help to get out from this problem PLEASE!!!

If you don't know your rescue email account (you won't be able to view/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to view/change your rescue email address for potential future use, or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

OSB error "Pending resource availability " please reply ASAP

Similar Messages

Maybe you are looking for