OSB: Oracle Service Bus 10.3.1 Available for download

http://www.oracle.com/technology/software/products/osb/index.html
A new version of the Oracle Service Bus (OSB 10.3.1) is now available, quick list of new OSB features:
* JCA Transport with certified JCA adapters
* Support for generating config.jar from command line or ant task.
* Enhancements to native MQ Series Transport.
* New APIs to support the SOA Management Pack for OSB.
Marc

Hi..
It's working (mostly) well now. The original implementation with ALSB/OSB 3.0 wasn't good, we got a patch for it back in December which contained big changes, so I presume that they back ported changes that were already in progress for the newer releases.
However that patch wouldn't read from Queue Aliases, since it was performing a queue depth.. We receievd another patch early in May that fixes this.
However we had an issue in production over the weekend, where the queue readers stopped reading, it looks like the problem was caused by a network router going funky, we've been trying to reproduce the situation in a local environment but not managed to replicate it yet, so it may be a rare case of events that causes the problem.
I'd suggest trying the 10.3.1 version out against an Alias Queue, if you get the MQ messages Completion code 1 Reason code 2068, then this is the queue depth issue, and you'll need to get a support case going.
We used the foreign jms okay for a long time, the only issue with it was firewalls chopping connections when writing (if no message written for a period of time less than an hour (firewall cutoff period)), this caused a connection hang for 6 minutes before it would realise the connection was actually dead before it created a new one. But we've been using the MQ transport for writing to queue since december with no problems. We were using the foreign jms for reading until last week.
..Regards.
..Mark.

Similar Messages

[OSB] - Oracle Service Bus 11gR1 ?

Hi everyone!
I'm evaluating Oracle Service Bus 10gR3 (10.3.1.0) which I downloaded from http://www.oracle.com/technology/products/integration/service-bus/index.html . Since I've seen that lots Oracle Products are alreadly released as of the platform 11g I'd like to know what are the Oracle plans for the OSB. Is there a new version at development to be added to the 11g platform ? I've read an Oracle Statement of Direction regarding a merge between OESB and OSB but it wasn't clear about some issues:
1- If I'm developing an application with eclipse using the current 10.3.1.0 version is there gonna have big changes in the 11g version?
2- Is the Oracle Workshop for Weblogic plugin for eclipse gonna be continued ? Because I'm using it.
As I understood from the document, OSB will "envelop" the OESB which will serve as a Mediator component, so I suppose I can keep using OSB now and adapt it for the 11g platform, is that right ??
Thanks

1- If I'm developing an application with eclipse using the current 10.3.1.0 version is there gonna have big changes in the 11g version?No. Your application (called configuration in OSB parlance), will be compatible when you migrate to OSB 11g Version. OSB auto upgrades when the configuration developed in OSB 10.3.1.0 is imported into OSB 11g.
For your evaluation, I have seen configurations developed during ALSB2.1, deploy into OSB 10.3.1.0 with out any issues (though documentation doesn't explicitly mention or guarantee this).
2- Is the Oracle Workshop for Weblogic plugin for eclipse gonna be continued ? Because I'm using it.Eclipse based development environment (OEPE) will be supported with OSB 11g. This OEPE based environment will offer all functionality that is being currently offered by Oracle Workshop for Weblogic.
As I understood from the document, OSB will "envelop" the OESB which will serve as a Mediator component, so I suppose I can keep using OSB now and adapt it for the 11g platform, is that right ??Absolutely, configuration developed in OSB10.3.10 can be used out of box in OSB11g.
Manoj

[OSB] Oracle Service Bus: select database DBadapter runtime

Suppose you have 2 databases DB1 and DB2 and both have the SCOTT scheme with the EMP table. The default way to gain access to the databases in the Oracle Service Bus (OSB) is by defining 2 database adapters and defining a business service on each adapter:
- BS1 DBadapter1 DB1.SCOTT.EMP
- BS2 DBadapter2 DB2.SCOTT.EMP
With this setup you can define a proxy service and let the message flow decide which adapter to call.
Now change this configuration a little and suppose you have 25 databases, you can define 25 database adapters and 25 business services, but that involves a lot of repeating work of defining adapters and business services. A more elegant configuration is one business service with one database adapter, and the database connection is set runtime in stead of design time.
PS BS DBadapter DB1.SCOTT.EMP ... DB25.SCOTT.EMP
The challenge is: how do you configure the database adapter runtime (called by an OSB business service).
With kind regards,
Jornica

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

[ANN] Oracle JDeveloper 10g production is now available for download.

It's probably worth a mention in this forum too ;-)
In case you haven't notice we have just released Oracle JDeveloper 10g production with a many new features that makes it the ideal Java tools for Oracle Application Server users.
Check it out at:
http://otn.oracle.com/products/jdev
A partial list of new features:
Visual layout editing for both JSP/HTML and Swing user interfaces.
Drag-and-Drop data-binding of business services to the user interface
Visual Struts-based page flow modeler
Declarative creation of business services based on EJB, TopLink, JavaBeans, Web Services, or Oracle ADF Business Components
Visual UML modeling with code generation
Code Auditing and Metrics
Hot-Swap Debugging
Improved code editor
XML Schema visual editor
Database development and Database modeling
One-Click deploy to Oracle Application Server, BEA Weblogic, JBoss and Tomcat
Web services development and consumption with support for WS-I
And much more.

Hi,
That is definitely a product manager - positioning question (forum ID: oalonso), so I'd recommend that you ask the same question in the SES forum. The Text team has been monitoring that forum and answering most of the posts there, so you'd probably be more likely to get your question answered.
Secure Enterprise Search
-Ron

Oracle Service Bus Installation

Greetings.
We are migrating an Oracle Service Bus infrastructure to a new Hardware Infrastructure in a High Availability environment with two nodes, in the current environment there is one node.
There isn't a hardware load balancer in the new infrastructure, I am thinking in use Oracle WebCache 11g in order to use it as load balancer. But I have some concerns because there isn't any document regarded to use WebCache in front to Oracle Service Bus.
What is the best deployment recomendation to install Oracle Service Bus in a High Availability envirnonment without using a Hardware Load Balancer?
The current Oracle Service Bus projects are writing some messages in some jms queues that uses a FileStore as persitent store. Is there any recommendation to set the JMS Queues in a High Availability environment?
Thanks in advance!
Ramiro Ortíz.

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Oracle Service Bus and Financila Message Designer

Hi,
I am new to OSB and FMD so want some good working examples/samples which can explain how to call the FMD cartridge from OSB.

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Oracle Service Bus (OSB) 10.3.1, now available

See:
http://www.oracle.com/technology/software/products/osb/index.html
A new version of the Oracle Service Bus (OSB 10.3.1) is now available, quick list of new OSB features:
* JCA Transport with certified JCA adapters
* Support for generating config.jar from command line or ant task.
* Enhancements to native MQ Series Transport.
* New APIs to support the SOA Management Pack for OSB.
Marc
http://orasoa.blogspot.com

Hi
I have wls 10.3.1 installed on my local machine. I installed it as part of configuring FMW 11g. I am trying to add
OSB component to it by running : osb1031_wls103_win32.exe.
But I am receiving the following error message:
The product maintenance level of the current installer ( wls 10.3.0.0) is not compatible with the maintenace
level of the product installed on your system (wls 10.3.1.0). Please obtain a compatibile installer or perform
maintenance on your current system to achieve the desired level.
So my guess from the above message is that "osb1031_wls103_win32.exe" is for wls 10.3 and not for wls 10.3.1.
Where can I get the OSB installer for wls 10.3.1? or how can I fix the above error?

Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

Hi All,
Sorry for the apparent silly question but I am studying and learning the product.
I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
4.4.3 Oracle Service Bus Configuration Page.
I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
Thanks.
Regards
Salvatore Ilardo

The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
Regards,
Anuj

Query regarding the tutorial for Oracle Service Bus (OSB 10gR3)

Hi,
I am working on a tutorial of Oracle Service Bus (OSB 10gR3).
I have created the proxy service and the Business Service, using Oracle Service Bus console.
The details are as follows:
Proxy service: LoanGateway
Business service1: A value of 4.9 or less causes the message to be routed to the ManagerLoanReview business service.
Business service2: A value of 5.0 or greater causes the message to be routed to the NormalLoan business service.
When i send the request message, so that it gets routed from proxy service to one of the business service than it gives following error.
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<exam:processLoanApp xmlns:exam="http://example.org">
<loanRequest xsi:type="java:LoanStruct" xmlns:java="java:normal.client" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<java:Name>Smith</java:Name>

<java:SSN>1234567</java:SSN>

<java:Rate>4.1</java:Rate>

<java:Amount>9000000</java:Amount>

<java:NumOfYear>10</java:NumOfYear>

<java:Notes>Manager Loan Application Review Service</java:Notes>
</loanRequest>
</exam:processLoanApp>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>
BEA-380002: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>
Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>

I have the same problem and I'm not able to telnet localhost on port 7021. How can I change this port number I think that port must be 7001, it is correct?Examples server domain is pre-configured for port 7021. The samples domain will have the examples properly deployed in this domain out of box. You dont need to change any thing in {BEA_HOME}\osb_10.3\samples\domains\servicebus\config.
I doubt this has to do something with firewall . Check the last statement in the log after starting the domain.
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.177.242.25:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "mneelapu", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "XYZ-v411-10-177-242-25.oracle.com", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
What are you seeing in your log file?
Edited by: mneelapu on May 19, 2009 9:58 AM

Oracle Service Bus (OSB), Eclipse --- and statement of direction

Can somebody please explain what this means in: http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
+...The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based console)...+
More specifically: what will happen to the Eclipse OSB plugin/workshop once the JDeveloper port is complete?
A) will it cease to exist and/or be terminated?
B) will it remain as is, without keeping the functionality in synch with new stuff in JDev?
C) will it continue to evolve side-by-side with JDev?
Thx,
-J.

I think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
Design-Time Environment
JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
environment moving forward.
The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
console).
cheers
James

Cross References - Oracle Service Bus

Hi,
Are Cross References supported in Oracle Service Bus 10G.
Thx in advance.
Best Rgds
RP

No, DVM and XRef support will be available in OSB in 11gR2.
HTH,
Sandeep

Getting error "URI index 0 is not valid" in Oracle Service Bus

Dear Friends,
I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
Thank you.
Regards,
Palak Mathur

AbhishekJ wrote:
Change the:
<xt:value>
<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
<weight>1</weight>
</tableElement>
</xt:value>Section to:
<xt:value>
<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
<tran:weight>1</tran:weight>
</tran:tableElement>
</xt:value>in your Customization File and try again.Hi Abhishek,
I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Weight</xt:envValueType>+
+<xt:location>0</xt:location>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
+</cus:envValueAssignments>+
The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
Now, when I added
+<cus:envValueAssignments>+
+<xt:envValueType>Service URI Table</xt:envValueType>+
+<xt:location xsi:nil="true"/>+
+<xt:owner>+
+<xt:type>BusinessService</xt:type>+
+<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
+</xt:owner>+
+<xt:value>+
+<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
+<weight>0</weight>+
+</tableElement>+
+</xt:value>+
+</cus:envValueAssignments>+
+, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
+<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
+<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
+<tran:weight>0</tran:weight>+
+</tran:tableElement>+
When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
Hope this helps.

Oracle Service Bus 11g { for financial services }

Latest version available of ORACLE SERVICE BUS FOR FINANCIAL SERVICES is 10gR3 (10.3.1.0) and that of ORACLE SERVICE BUS is 11.1.1.3.0
Are features provided in OSB FOR FINANCIAL SERVICES { like support for specific message formats and protocols such as SWIFT and FIX }
available in OSB 11g and if not, how to get these features with OSB 11g?
Thanks, Yogesh
Edited by: Yogesh Ketkar on Jun 24, 2010 11:36 AM

It is normal practice to release OSB FOR FINANCIAL SERVICES shortly after release of OSB.
So OSB 11gR1 for Financial services should be released any time soon, as OSB 11g R1 is already released.
Please talk to Oracle Sales representative for exact dates.
Thanks
Manoj

Need to Import an application built using Oracle Service Bus on Oracle Public Cloud

I have built an application using Oracle Service Bus (OSB) eclipsed IDE which transfers file from server1 to server2, reads the transferred file, transforms it into a payload and calls a webservice. I have tested this application locally by installing Oracle Service Bus on one on my servers.
I have java as a service account on Oracle Public Cloud. I would like to import the above application onto Oracle Public Cloud. I am not sure if the Weblogic domain on Oracle Public Cloud has enabled OSB or not.
Let me know if someone can help me.

Hello,
Oracle Service Bus is currently not supported in Oracle Java Cloud Service.
Oracle Java Cloud Service supports deployment of JavaEE and ADF applications.
-- Nilesh

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

OSB: Oracle Service Bus 10.3.1 Available for download

Similar Messages

Maybe you are looking for