OSB problem posting 5MB body to a business service endpoint

Hello,
I have an https endpoint they results in a Broken pipe exception after running for about 10mins if I send a SOAP body greater than 5MB. If I send the same request to this endpoint using SOAPUI (no OSB involvement) it works fine and completes in <1min, it only fails through OSB. Also if the request is less than 5MB it works fine through OSB and again completes in <1min.
I've tried calling a proxy service (through test console and SOAPUI) and the business service (through test console) and all fail with the same broken pipe exception. Below is the constant state of the thread during this 10min period.
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=3 tid=0x02fa6400 nid=0x16 runnable [0xb19fd000..0xb19ffaf0]
java.lang.Thread.State: RUNNABLE
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at com.certicom.io.OutputSSLIOStream.write(Unknown Source)
     at com.certicom.tls.record.WriteHandler.flushOutput(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105)
     - locked <0xe70af568> (a java.io.BufferedOutputStream)
     at weblogic.net.http.HttpOutputStream.write(HttpOutputStream.java:22)
     at weblogic.utils.io.UnsyncByteArrayOutputStream.writeTo(UnsyncByteArrayOutputStream.java:104)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:162)
     - locked <0xcefd08f8> (a weblogic.net.http.SOAPHttpsURLConnection)
     at weblogic.net.http.HttpURLConnection.writeRequestForAsyncResponse(HttpURLConnection.java:492)
     at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:190)
     at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:152)
     at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOutboundMessageContext.java:313)
     at com.bea.wli.sb.transports.http.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:564)
     at sun.reflect.GeneratedMethodAccessor310.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
I am running OSB 10.3.0 on SPARC Solaris using Sun JVM.
Any ideas/suggestions?
Many thanks,
Mike.

Hello,
I've tried content streaming but it made no difference. Maybe I've misunderstood content streaming but I thought you use this when body variable in the pipeline pair of a proxy is too big to manipulate in memory. In my scenario this is not a problem (I can report on the body fine just before I route to the business service) the only issue occurs when I call the business service with a request greater than 5MB.
I've already adjusted the WLS timeouts/message sizes as follows:
Max Post Size = -1 (although I think this is only used for POST to WLS rather than the other way around)
Max Message Size = 50000000
JTA timeout = 60
The only stack trace is for the broken pipe:
####<30-Mar-2010 08:35:57 o'clock BST> <Debug> <AlsbTransports> <int-app-04> <RSPCA_ESB_Server1> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1269934557943> <BEA-000000> <LoadBalanceFailoverListener.sendMessageToServiceAsync
com.bea.wli.sb.transports.TransportException: Broken pipe
at com.bea.wli.sb.transports.TransportException.newInstance(TransportException.java:195)
at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOutboundMessageContext.java:370)
at com.bea.wli.sb.transports.http.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:564)
at sun.reflect.GeneratedMethodAccessor327.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
at $Proxy60.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:543)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:478)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:544)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:422)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:583)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:498)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.StatisticUpdaterRuntimeStep.processMessage(StatisticUpdaterRuntimeStep.java:41)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:339)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:191)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:75)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)
at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:371)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:279)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:277)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.securedInvoke(HttpTransportServlet.java:276)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:237)
at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.net.SocketException: Broken pipe
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at com.certicom.io.OutputSSLIOStream.write(Unknown Source)
at com.certicom.tls.record.WriteHandler.flushOutput(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.write(BufferedOutputStream.java:105)
at weblogic.net.http.HttpOutputStream.write(HttpOutputStream.java:22)
at weblogic.utils.io.UnsyncByteArrayOutputStream.writeTo(UnsyncByteArrayOutputStream.java:104)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:162)
at weblogic.net.http.HttpURLConnection.writeRequestForAsyncResponse(HttpURLConnection.java:492)
at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:190)
at weblogic.net.http.AsyncResponseHandler.writeRequestAndRegister(AsyncResponseHandler.java:152)
at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOutboundMessageContext.java:313)
at com.bea.wli.sb.transports.http.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:564)
at sun.reflect.GeneratedMethodAccessor327.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:82)
at $Proxy60.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:543)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:478)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:544)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:422)
at com.bea.wli.sb.pipeline.PipelineContextImpl.doDispatch(PipelineContextImpl.java:583)
at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:498)
at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
at com.bea.wli.sb.pipeline.StatisticUpdaterRuntimeStep.processMessage(StatisticUpdaterRuntimeStep.java:41)
at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:339)
at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:866)
at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:191)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:75)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)
at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:371)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:279)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:277)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.securedInvoke(HttpTransportServlet.java:276)
at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:237)
at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks,
Mike.

Similar Messages

OracleServiceBus Business Service Endpoints user 9096491

Question1:
I am having 3 business service endpoint with 3 business specifications(WSDL's). But I do not want to create a business service for each business service endpoints. I am creating one business service with end point. how to change the existing business service endpoint according the business? if any way to pass the other endpoints to the existing business service please provide me the answer.
Proxy----> BusinessService(3 endpoints)
Questions2: If it achievable by using dynamic Routing means how?

Use routing options to sepcify the endpoint at runtime of business service. However this would be possible only if all the three wsdls are same. http://docs.oracle.com/cd/E23943_01/dev.1111/e15866/ui_ref.htm#i1290930
If you have 3 different wsdls and then you cam use dynamic routing, but in this case you wil have to create 3 business service.

Having problem in passing the values in business service in OSB.

hi ,
in my requirement i have to write a string in AQ , i have created a AQ adapter and a business service related to that now i have a variable which contains the string i have to pass, how i can paas this variable in my business service using service callout or publish ??
Edited by: 990437 on Mar 6, 2013 1:36 AM

I checked the Business Service using the test console . It worked fine .
There is no listener on the AQ . The test messages and the messages sent using the service callout are still there.
I have logged the body variable and I can see its fine.
The thing is Service Callout works but at the end throws an error :
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884743> <BEA-000000> <Started Payload Translation...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <End of Payload Translation...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <Extracting Header Properties from XMLRecord...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <No recipients specified...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884746> <BEA-000000> <Successfully completed outbound interaction to queue - JOB_QUEUE>
<[ACTIVE]ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884750> <BEA-000000> <Closing Interaction...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884750> <BEA-000000> <Closing Interaction...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-01FF0221C1FA5B53DDE4> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884751> <BEA-380003> <Exception on TransportManagerImpl.sendMessageAsync: unchecked exception:, java.lang.NullPointerException
java.lang.NullPointerException
at com.bea.wli.sb.transports.jca.codec.JCAAbstractMessage.getPart(JCAAbstractMessage.java:75)
at com.bea.wli.sb.transports.jca.codec.JCAAbstractMessage.getPart(JCAAbstractMessage.java:31)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapDocCodec.marshallBody(SoapDocCodec.java:67)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapCodec.marshall(SoapCodec.java:192)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapDocClientCodec.marshall(SoapDocClientCodec.java:58)
at com.bea.wli.sb.transports.jca.codec.JCAClientCodec.createResponse(JCAClientCodec.java:57)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:168)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:574)
at sun.reflect.GeneratedMethodAccessor563.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)......................................
On the other hand the Publish Action with either QoS mode does nothing . No exception , No messages in the AQ . It does not do anything at all.

Different number of Business service endpoint for prod/non prod env in OSB

Hi,
I have a scenario in my project. We have 2 managed servers in all non production environment and 4 servers in production environment.
In non production environments, have added 2 end point uri in the business service. If we create customization file from this, it will have only 2 endpoint uri details.
Now problem is how to get all 4 enpoint uri added for production environment. Dont know how if we try to add 2 uris in customization file will work fine or not. Also it will be very cumbersome as there are more than 100 business services.
Tried with comma seperated urls, but load balancing is not happening. Same thing when cluster address is used.
Any pointers on this will be helpful.
Regards,
Pravin
Edited by: pravinkapile on Sep 29, 2009 9:39 PM

Hi..
There's several ways to do it.. What I prefer to do is to generate the customization files and have a seperate set for each environment. As you say hand modifying the customization files is a pain (and error prone), so I wrote a program to generate the customization files.. basically it runs against my local dev environment, creates an edit session, modifies the env values (these are held in a properties file (easier to maintain)), exports the customization files and sbconfig jars, then discards the edit session.
I then use a wlst/jmx script to perform the imports and running the customization files, then after the customization is ran, then I have a section that modifies the business service with multiple endpoints to set them up to load balance/failover..
this is the function in my utils script to set the load balancing/failover....
#=======================================================================================
# Routine to modify all Business Endpoints with multiple URI's to set the Loadbalancing
# algorithm to Round-Robin -
#   Input must be an editable instance of an ALSBConfigurationMBean.
#=======================================================================================
def configureMultipleBSEndpoints(domainService, alsbSession):
try:
    # get the Service config MBean
    servConfMBean = getServiceConfigurationMBean(domainService, alsbSession.getSession())
    bsQuery = BusinessServiceQuery()
    bsRefs = alsbSession.getRefs(bsQuery)
    changesToCommit = cju.parseBoolString("false")
    for bsRef in bsRefs:
      modificationsMade = cju.parseBoolString("false")
      serviceDefinition = servConfMBean.getServiceDefinition(bsRef)
      endPointConfig = servConfMBean.getEndPointConfiguration(bsRef)
      if endPointConfig.getURIArray().__len__() > 1:
        outBoundProps = endPointConfig.getOutboundProperties()
        if outBoundProps.getLoadBalancingAlgorithm() == LoadBalancingAlgorithmEnum.NONE:
          outBoundProps.setLoadBalancingAlgorithm(LoadBalancingAlgorithmEnum.ROUND_ROBIN)
          modificationsMade = cju.parseBoolString("true")
        if outBoundProps.getRetryApplicationErrors():
          outBoundProps.setRetryApplicationErrors(cju.parseBoolString("false"))
          modificationsMade = cju.parseBoolString("true")
        retryCount = endPointConfig.getURIArray().__len__() - 1
        if outBoundProps.getRetryCount() != retryCount:
          outBoundProps.setRetryCount(retryCount)
          modificationsMade = cju.parseBoolString("true")
        if outBoundProps.getRetryInterval() != 2:
          outBoundProps.setRetryInterval(2)
          modificationsMade = cju.parseBoolString("true")
        serviceOpsEntry = servConfMBean.getServiceOperations(bsRef)
        if cju.booleanToString(serviceOpsEntry.isTakingURIOfflineEnabled()) == "false":
          serviceOpsEntry.setTakingURIOfflineEnabled(cju.parseBoolString("true"))
          serviceOpsEntry.setDelayInterval(15);
          modificationsMade = cju.parseBoolString("true")
        if modificationsMade:
          print 'endpoint configuration modifications made to - ' + bsRef.getFullName()
          hmServiceOpEntries = HashMap()
          hmServiceOpEntries.put(bsRef, serviceOpsEntry)
          endPointConfig.setOutboundProperties(outBoundProps)
          serviceDefinition.setEndpointConfig(endPointConfig)
          servConfMBean.updateService(bsRef, serviceDefinition)
          servConfMBean.updateServiceOperations(hmServiceOpEntries)
          changesToCommit = cju.parseBoolString("true")
    return changesToCommit
except:
    print "Unexpected error:", sys.exc_info()
    print 'Failed to Configure Business Service Multiple Endpoints LoadBalancing Algorithm '
    raise..Mark.

OSB -is it possible to publish a business service to UDDI

Hello
we are now using OSR to manage all the services' registry. As the OSB has been in production for quite a long time, and there are many services (both business services and proxy services).
It seems that the OSB can only publish proxy services to the UDDI, that means we have to register other serivces to the OSR manually(OMG, so much work!!), i am wondering : is there any better solution than that???
thanks
Regards
Wen
Edited by: Xu Wen on 2010-11-23 下午7:24

OSR works fine with OSB, and services registered in OSR can be imported to OSB. but seems only proxy services from OSB can be published to OSR, that bothers me a bit ;)
anyway appreciate ur help
Regards
Wen

OSB - Content length http header missing from business service out message

Hi all,
I am having some diffuclty with a business service in OSB. I created the business service from the wsdl and created a regular proxy service that just routes to the business service. When i run the test console i get the below fault.
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: Length Required</faultstring>
<detail>
After some debugging i find that the content length http header is missing from the outbound message the business process creates and sends to the acutal web service which sends back the http 411 fault.
Does anyone know how to configure the message flow of my proxy service to ensure that the outbound message sent from the business service contains that content length http header or any suggestions on how to fix this issue will be appreciated.
Thanks

Disable the "Use Chunked Streaming Mode" property in HTTP Transport Configuration of your business service. By default it remains enabled.
Regards,
Anuj

Oracle Service Bus - Business Service Endpoint URI - Dynamic

Hi,
I'm trying to find a way to avoid hard-coding the endpoint URI in a business service. The reason I need to achieve this is because for the different environments (development, testing, production, etc...) the URI will be different.
I have spent the past 2 days searching the oracle forum and documentation but have come up with nothing. Is there a way to achieve this?
Preferably, is there a way to store the endpoint URIs in a configuration/properties file which can be changed when needed?
Any help is much appreciated!
Best Regards,
Adel Haider

Hi Adel,
Customization file will be the best solution for your problem. You may generate a environment specific customization file. To know more, please refer -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/customization.html#wp1129087
Simplest solution would be to generate a customization file and replace the existing URI's with the required one's using replace all option of textpad. Run this customization file at target environment, after importing the OSB configuration.
Regards,
Anuj

List Business Services Endpoints with WLST

Hi,
We're using OSB 11.1.1.3 and 11.1.1.6 in several environments.
We just need to use wlst scripting to keep track of all business services and their endpoint uri's automatically.
We tried using some old scripts but found out that they don't work on 11g installations:
We tried the following code:
connect('weblogic','oracle10','t3://soavm2:7001')
domainRuntime()
sessionName = "FindServicesSession" + str(System.currentTimeMillis())
sessionMBean = findService(SessionManagementMBean.NAME, SessionManagementMBean.TYPE)
sessionMBean.createSession(sessionName)
servConfMBean = findService(ServiceConfigurationMBean.NAME + "." + sessionName, ServiceConfigurationMBean.TYPE)
alsbCore = findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE)
allRefs=alsbCore.getRefs(Ref.DOMAIN)
for ref in allRefs:
typeId = ref.getTypeId()
if typeId == "BusinessService":
serviceDefinition = servConfMBean.getServiceDefinition(ref)
endpointConfigration = serviceDefinition.getEndpointConfig()
print endpointConfigration
We get a "AttributeError: 'NoneType' object has no attribute 'getServiceDefinition'" error. It seems that it is related to metalink note "How To Modify Service Configurations By OSB JMX API [ID 1431254.1]". However the code provided there is for java through jmx, does anybody has a working example of how to do that on wlst?
Thanks!

Hi Marc,
What i found is that we can get list of business services URIs by consulting SERVICE_URI_TABLE...
Here's a script that reads a parameter file (which can have multiple domains information) with connection info and then gets all services and prints a list of the service name and URI on a file for each domain...
# params.txt format:
# user,passwd,admin-url
# Ej:
# weblogic,weblogic1,t3://adminsoa:7001
# weblogic,weblogic100,t3//adminsoa2:7001
import wlstModule
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
from com.bea.wli.sb.management.configuration import BusinessServiceConfigurationMBean
from com.bea.wli.sb.util import EnvValueTypes
from com.bea.wli.config import Ref
from com.bea.wli.sb.util import Refs
from xml.dom.minidom import parseString
f1 = open('/tmp/params.txt','r')
for line in f1:
spline=line.split(',')
usr=spline[0]
pwd=spline[1]
url=spline[2].replace("\n","")
try:
connect(usr,pwd,url)
domName=cmo.getName()
domainRuntime()
sessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
sessionName="WLSTSession"+ str(System.currentTimeMillis())
sessionMBean.createSession(sessionName)
alsbSession = findService(ALSBConfigurationMBean.NAME + "." + sessionName, ALSBConfigurationMBean.TYPE)
alsbCore = findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE)
allRefs=alsbCore.getRefs(Ref.DOMAIN)
fileName='/tmp/'+domName+'_'+url.replace('t3://','').replace(':','')+'_BServicesLista.csv'
f2 = open(fileName, 'w')
f2.write('Name'+','+'URL'+'\n')
for ref in allRefs:
typeId = ref.getTypeId()
if typeId == "BusinessService":
name=ref.getFullName()
uris=alsbSession.getEnvValue(ref, EnvValueTypes.SERVICE_URI_TABLE, None)
xml=parseString(uris.toString())
xmlTag = xml.getElementsByTagName('tran:URI')[0].toxml()
xmlData=xmlTag.replace('<tran:URI>','').replace('</tran:URI>','')
f2.write('\"'+name+'\"'+','+'\"'+xmlData+'\"'+'\n')
f2.close()
except Exception,e:
print "Error trying to connect to " + url + 'Error: ' + str(e)
f1.close()
disconnect()
It's been working for us so far...

Oracle Service Bus - Business Service Endpoint URI - Change at runtime

Hi,
Is there a way of changing/passing the endpoint URI to a Business Service at runtime? The reason for my question is that depending on the content of the message in a Proxy Service that calls this Business Service I may need to change the URI.
Kind Regards,
Adel

Adel,
Is there some use-case limitation that would stop us from using Dynamic routing ?
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1100135.
DynamicRouting /Dynamic publish can be considered depending on the use-case.
Other option is to use Routing options: Modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority.
Manoj

OSB - Problems connecting sync business service to resp. queue with login

Hello,
I have a synchronous JMS business service which uses the MessageID correlation pattern with statically configured request and response JMS queues. The JMS queues are imported using a foreign JMS and a connection factory with credentials (username and password). The requests seem to work just fine (they are received at the foreign JMS) but I still have problems with the responses. I get the following log entries:
<Mar 31, 2010 1:50:10 PM CEST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: ResponseEJB-8048850762288479454-46349ef3.127b3dbbff1.-7fe6 is unable to connect to the JMS destination: queue.local.name. The Error was:
javax.jms.JMSSecurityException: User: null is not authorized to read from destination queue.external.name>
It seems that the response is handled by a MDB which does not seem to use the username and password configured in the connection factory. Any ideas how to make it use the username and password of the connection factory to receive the response? I have tried both providing the connection factory for the response and leaving it empty (which would cause it to use the one from the request) - both with no success.
I am really stuck here..
Thanks,
Dimo

Alternatively you can try a very dirty way to make this work I think. The reason why the username in foreign server CF's username crednetials are not recognized is due to the fact that the deployment descriptors for the MDB should not specify a provider-URL and there should be a resource reference for the CF.
Business service with reply queues generate a MDB under the hood . You can try to edit the deployment descriptors for this MDB to make this to work.
Sample MDB weblogic-ejb-jar.xml for recognizing the foreign jms username
Foreign JMS
<foreign-server name=”ForeignServer”>
<default-targeting-enabled>true</default-targeting-enabled>
<foreign-destination name=”A”>
<local-jndi-name>A</local-jndi-name>
<remote-jndi-name>queue/A</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name=”FConf”>
<local-jndi-name>FConf</local-jndi-name>
<remote-jndi-name>ConnectionFactory</remote-jndi-name>
<username>esbuser</username>
<password-encrypted>{3DES}90sIZwo6Llr9r73p+VXkvQ==</password-encrypted>
</foreign-connection-factory>
<initial-context-factory>org.jnp.interfaces.NamingContextFactory</initial-context-factory>
<connection-url>jnp://localhost:1099</connection-url>
</foreign-server>
weblogic-ejb-jar.xml
<?xml version=’1.0′ encoding=’UTF-8′?>
<web:weblogic-ejb-jar xmlns:web=”http://www.bea.com/ns/weblogic/weblogic-ejb-jar”>
<web:weblogic-enterprise-bean>
<web:ejb-name>RequestEJB-2518965873970113789–2352f820.127bd3f293c.-7fdb</web:ejb-name>
<web:message-driven-descriptor>
<web:pool>
<web:max-beans-in-free-pool>1000</web:max-beans-in-free-pool>
<web:initial-beans-in-free-pool>1</web:initial-beans-in-free-pool>
</web:pool>
<web:destination-jndi-name>A</web:destination-jndi-name>
<web:connection-factory-jndi-name>FConf</web:connection-factory-jndi-name>
</web:message-driven-descriptor>
<web:transaction-descriptor>
<web:trans-timeout-seconds>600</web:trans-timeout-seconds>
</web:transaction-descriptor>
<web:resource-description>
<web:res-ref-name>jms/ConnectionFactory</web:res-ref-name>
<web:jndi-name>FConf</web:jndi-name>
</web:resource-description>
<web:resource-description>
<web:res-ref-name>jms/QueueName</web:res-ref-name>
<web:jndi-name>A</web:jndi-name>
</web:resource-description>
</web:weblogic-enterprise-bean>
</web:weblogic-ejb-jar>
This needs to be done each time OSB generates a new MDB for the business service - eg. when the business service definition changes.
Regards,
Atheek

FILE NAME HAS TO PASS TO BUSINESS SERVICE in OSB

I have a scenario where i have to get the name of the file , which my file adapter is going to poll.
Proxyservice----->file Adapter artifacts.(Created a Proxyservice on OSB)
i have to get the file name by using the jac:Header.
How can i send the file name to businessservice in a body , businessservice will be a file write (body)

Create a business service using file transport and type "Text".
Obtain the file name and assign to $body in ur proxy service stage and publish to the business service u just created.

OSB with request response MQ business service

Hi,
We have OSB webservice whice interacts with MQ via business service. We need to send the request to MQ request queue and get the response from the response queue.
For this, we have configured a business with MQ transport, request-response is enabled, message id is set for the correlation, auto generate correlation value is chosen.
The business service sends the message but unable receive the response from the response queue. Failing with the error message like
The invocation resulted in an error: [WliSbTransports:381918]Failed to receive response, within the configured timeout, for request message with id 42454BD3E5F7647914544E793F9F0000013EC9DF03918057 and correlation id 42454BD3E5F7647914544E793F9F0000013EC9DF03918057.
But we checked with the end system, the response is sent tot he response queue in no time. We also increased the time out but still same issue.
We noticed that if we dont send the message id, we are getting the response but not response of the request sent but some other response.
Please suggest what needs to be done to fix the issue.

Open your business service and navigate to HTTP Transport configuration page and check what is the http type is enabled.
Look to me its with GET method, change it to POST and re-try.
If the above solution is not helping, try to check the Follow HTTP redirects check box below the Advanced Setting in same page.
Thanks,
Vijay

Service Callout to HTTP Post Business Service?

Hi,
I have created a "Business Service" with following config,
1) Any XML Service
2) Prtocol- HTTP
3) HTTP Request Method- Post.
I have created a Proxy Service , which is "Any XML Service" based on HTTP ptotocol.
inside the message flow of proxy service i am routing to the Above Business Service passing query parameter. The business service returns an XML.
How do i make a service callout to the business service assing a query string?
I need this functionality to work because i have to call multiple business service (endpoint is a jsp which accepts query string) inside a proxy service and retreive xml from response , merge them and send it back to the client(invoking proxy service).
Thanks,
Anup

Hi Gregory,
In fact when i used route node to invoke a business service i modified "URL dynamically by setting the value in the pipeline variable $outbound", it worked here.
Same i tried on Service Callout, it did not work. Also when we create a service callout action it expects us to select either "confugure soap body" or "configure payload document" followed by
1) Request Document variable
2) Response Document variable.
What parameter should i set for above fields?
Thanks,
Anup

How do I build a dynamic business service URL in OSB 11g?

Hello,
I am used to using the business service endpoint URIs that we configure on the Transport tab of our business services in OSB 11.1.1.6. We can add multiple static entries here for load balancing, and we can overwrite these with a Customization File as we migrate through DEV, TEST, PROD. Everything's just fine there.
I now need to start consuming RESTful services with dynamic URLs such as:
http://host:port/customer/{customerId}
that would result in HTTP calls to values like:
http://host:port/customer/12345678
and
http://host:port/customer/55555555
I see that I can build the URI using the Routing Options action in our proxy message flow and throw in all of those variable values at runtime. This is working in DEV just fine. And, effectively, I've overridden the business service endpoint URIs that we configured in the Transport.
But now I want to:
1) Use multiple endpoint URIs for our cluster
2) Deploy to TEST
What is the proper way to do this? I would guess in the business service endpoint URIs in the customization file, but I don't know how to parameterize those. I would also guess customization file find/replace functionality to change the host:port in my Routing Options action, but then that would still be just a single-node endpoint and not a pointer to multiple servers in our cluster.
Can someone please advise the best way to configure these dynamic URLs at runtime while still allowing for clustered endpoints and for customization files to be applied as we promote through our environments?
Thank you,
Michael

Found some old code.
I think you need to do
property_text = "#"^variable_text
then you can do the following
property_list[1][property_text]
That seemed to work.

OSB: Business Service Timeout for JCA Connection

Hi,
I am wondering if there's any way to configure timeout for a JCA connection in OSB? It's not configurable in Business Service.
Thanks.

Hi Anuj,
I am using DbAdapter. As for operation, which operation are you referring to? Where do I check to verify this?
Thanks.
Edited by: user13298498 on May 21, 2012 11:01 PM

OSB problem posting 5MB body to a business service endpoint

Similar Messages

Maybe you are looking for